[dpdk-dev] [RFC] ethdev: support metadata as flow rule criteria

Dekel Peled dekelp at mellanox.com
Mon Aug 13 09:46:58 CEST 2018


Current implementation of rte_flow allows match pattern of flow rule,
based on packet data or header fields.
This limits the application use of match patterns.

For example, consider a vswitch application which controls a set of VMs,
connected with virtio, in a fabric with overlay of VXLAN.
Several VMs can have the same inner tuple, while the outer tuple is
different and controlled by the vswitch (encap action).
For the vswtich to be able to offload the rule to the NIC, it must use a
unique match criteria, independent from the inner tuple, to perform the
encap action.

This RFC adds support for additional metadata to use as match pattern.
The metadata is an opaque item, fully controlled by the application.

The use of metadata is relevant for egress rules only.
It can be set in the flow rule using the RTE_FLOW_ITEM_META.

Application should set the packet metdata in the mbuf->metadata field,
and set the PKT_TX_METADATA flag in the mbuf->ol_flags.
The NIC will use the packet metadata as match criteria for relevant flow
rules.

For example, to do an encap action depending on the VM id, the
application needs to configure 'match on metadata' rte_flow rule with
VM id as metadata, along with desired encap action.
When preparing an egress data packet, application will set VM id data in
mbuf metadata field and set PKT_TX_METADATA flag.

PMD will send data packets to NIC, with VM id as metadata.
Egress flow on NIC will match metadata as done with other criteria.
Upon match on metadata (VM id) the appropriate encap action will be
performed.

This RFC introduces metadata item type for rte_flow RTE_FLOW_ITEM_META,
along with corresponding struct rte_flow_item_meta and ol_flag
PKT_TX_METADATA.
It also enhances struct rte_mbuf with new data item, uint64_t metadata.

Comments are welcome.

Signed-off-by: Dekel Peled <dekelp at mellanox.com>
---
 doc/guides/prog_guide/rte_flow.rst | 21 +++++++++++++++++++++
 lib/librte_ethdev/rte_flow.c       |  1 +
 lib/librte_ethdev/rte_flow.h       | 25 +++++++++++++++++++++++++
 lib/librte_mbuf/rte_mbuf.h         | 11 +++++++++++
 4 files changed, 58 insertions(+)

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index b305a72..b6e35f1 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1191,6 +1191,27 @@ Normally preceded by any of:
 - `Item: ICMP6_ND_NS`_
 - `Item: ICMP6_ND_OPT`_
 
+Item: ``META``
+^^^^^^^^^^^^^^
+
+Matches an application specific 64 bit metadata item.
+
+- Default ``mask`` matches any 64 bit value.
+
+.. _table_rte_flow_item_meta:
+
+.. table:: META
+
+   +----------+----------+---------------------------+
+   | Field    | Subfield | Value                     |
+   +==========+==========+===========================+
+   | ``spec`` | ``data`` | 64 bit metadata value     |
+   +----------+--------------------------------------+
+   | ``last`` | ``data`` | upper range value         |
+   +----------+----------+---------------------------+
+   | ``mask`` | ``data`` | zeroed to match any value |
+   +----------+----------+---------------------------+
+
 Actions
 ~~~~~~~
 
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index cff4b52..54e5ef8 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -66,6 +66,7 @@ struct rte_flow_desc_data {
 		     sizeof(struct rte_flow_item_icmp6_nd_opt_sla_eth)),
 	MK_FLOW_ITEM(ICMP6_ND_OPT_TLA_ETH,
 		     sizeof(struct rte_flow_item_icmp6_nd_opt_tla_eth)),
+	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 };
 
 /** Generate flow_action[] entry. */
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index f8ba71c..b81c816 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -413,6 +413,15 @@ enum rte_flow_item_type {
 	 * See struct rte_flow_item_mark.
 	 */
 	RTE_FLOW_ITEM_TYPE_MARK,
+
+	/**
+	 * [META]
+	 *
+	 * Matches a metadata value specified in mbuf metadata field.
+	 *
+	 * See struct rte_flow_item_meta.
+	 */
+	RTE_FLOW_ITEM_TYPE_META,
 };
 
 /**
@@ -849,6 +858,22 @@ struct rte_flow_item_gre {
 #endif
 
 /**
+ * RTE_FLOW_ITEM_TYPE_META.
+ *
+ * Matches a specified metadata value.
+ */
+struct rte_flow_item_meta {
+	uint64_t data;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_META. */
+#ifndef __cplusplus
+static const struct rte_flow_item_meta rte_flow_item_meta_mask = {
+	.data = RTE_BE64(UINT64_MAX),
+};
+#endif
+
+/**
  * RTE_FLOW_ITEM_TYPE_FUZZY
  *
  * Fuzzy pattern match, expect faster than default.
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 9ce5d76..8f06a78 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -182,6 +182,11 @@
 /* add new TX flags here */
 
 /**
+ * This flag indicates that the metadata field in the mbuf is in use.
+ */
+#define PKT_TX_METADATA		(1ULL << 41)
+
+/**
  * UDP Fragmentation Offload flag. This flag is used for enabling UDP
  * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
  * to store the MSS of UDP fragments.
@@ -593,6 +598,12 @@ struct rte_mbuf {
 	 */
 	struct rte_mbuf_ext_shared_info *shinfo;
 
+	/**
+	 * Application specific metadata value for flow rule match.
+	 * Valid if PKT_TX_METADATA is set.
+	 */
+	uint64_t metadata;
+
 } __rte_cache_aligned;
 
 /**
-- 
1.8.3.1



More information about the dev mailing list