[dpdk-dev] [dpdk-stable] [PATCH v4] net/bonding: per-slave intermediate rx ring

Matan Azrad matan at mellanox.com
Thu Aug 23 09:28:03 CEST 2018


Hi

From: Eric Kinzie
> On Wed Aug 22 11:42:37 +0000 2018, Matan Azrad wrote:
> > Hi Luca
> >
> > From: Luca Boccassi
> > > On Wed, 2018-08-22 at 07:09 +0000, Matan Azrad wrote:
> > > > Hi Chas
> > > >
> > > > From: Chas Williams
> > > > > On Tue, Aug 21, 2018 at 11:43 AM Matan Azrad
> > > > > <mailto:matan at mellanox .com> wrote:
> > > > > Hi Chas
> > > > >
> > > > > From: Chas Williams
> > > > > > On Tue, Aug 21, 2018 at 6:56 AM Matan Azrad
> > > > > > <mailto:matan at mellano x.com>
> > > > > > wrote:
> > > > > > Hi
> > > > > >
> > > > > > From: Chas Williams
> > > > > > > This will need to be implemented for some of the other RX
> > > > > > > burst methods at some point for other modes to see this
> > > > > > > performance improvement (with the exception of active-backup).
> > > > > >
> > > > > > Yes, I think it should be done at least to
> > > > > > bond_ethdev_rx_burst_8023ad_fast_queue (should be easy) for
> now.
> > > > > >
> > > > > > There is some duplicated code between the various RX paths.
> > > > > > I would like to eliminate that as much as possible, so I was
> > > > > > going to give that some thought first.
> > > > >
> > > > > There is no reason to stay this function as is while its twin is
> > > > > changed.
> > > > >
> > > > > Unfortunately, this is all the patch I have at this time.
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > > On Thu, Aug 16, 2018 at 9:32 AM Luca Boccassi
> > > > > > > <mailto:bluca at deb ian.org> wrote:
> > > > > > >
> > > > > > > > During bond 802.3ad receive, a burst of packets is fetched
> > > > > > > > from each slave into a local array and appended to
> > > > > > > > per-slave ring buffer.
> > > > > > > > Packets are taken from the head of the ring buffer and
> > > > > > > > returned to the caller.  The number of mbufs provided to
> > > > > > > > each slave is sufficient to meet the requirements of the
> > > > > > > > ixgbe vector receive.
> > > > > >
> > > > > > Luca,
> > > > > >
> > > > > > Can you explain these requirements of ixgbe?
> > > > > >
> > > > > > The ixgbe (and some other Intel PMDs) have vectorized RX
> > > > > > routines that are more efficient (if not faster) taking
> > > > > > advantage of some advanced CPU instructions.  I think you need
> > > > > > to be receiving at least 32 packets or more.
> > > > >
> > > > > So, why to do it in bond which is a generic driver for all the
> > > > > vendors PMDs, If for ixgbe and other Intel nics it is better you
> > > > > can force those PMDs to receive always 32 packets and to manage
> > > > > a ring by themselves.
> > > > >
> > > > > The drawback of the ring is some additional latency on the
> > > > > receive path.
> > > > > In testing, the additional latency hasn't been an issue for bonding.
> > > >
> > > > When bonding does processing slower it may be a bottleneck for the
> > > > packet processing for some application.
> > > >
> > > > > The bonding PMD has a fair bit of overhead associated with the
> > > > > RX and TX path calculations.  Most applications can just arrange
> > > > > to call the RX path with a sufficiently large receive.  Bonding
> > > > > can't do this.
> > > >
> > > > I didn't talk on application I talked on the slave PMDs, The slave
> > > > PMD can manage a ring by itself if it helps for its own performance.
> > > > The bonding should not be oriented to specific PMDs.
> > >
> > > The issue though is that the performance problem is not with the
> > > individual PMDs - it's with bonding. There were no reports regarding
> > > the individual PMDs.
> > > This comes from reports from customers from real world production
> > > deployments - the issue of bonding being too slow was raised multiple
> times.
> > > This patch addresses those issues, again in production deployments,
> > > where it's been used for years, to users and customers satisfaction.
> >
> > From Chas I understood that using burst of 32 helps for some slave PMDs
> performance which makes sense.
> > I can't understand how the extra copy phases improves the bonding itself
> performance:
> >
> > You added 2 copy phases in the bonding RX function:
> > 1. Get packets from the slave to a local array.
> > 2. Copy packet pointers from a local array to the ring array.
> > 3. Copy packet pointers from the ring array to the application array.
> >
> > Each packet arriving to the application must pass the above 3 phases(in a
> specific call or in previous calls).
> >
> > Without this patch we have only -
> > Get packets from the slave to the application array.
> >
> > Can you explain how the extra copies improves the bonding performance?
> >
> > Looks like it improves the slaves PMDs and because of that the bonding
> PMD performance becomes better.
> 
> I'm not sure that adding more buffer management to the vector PMDs will
> improve the drivers' performance; it's just that calling the rx function in such
> a way that it returns no data wastes time.

Sorry, I don't fully understand what you said here, please rephrase.

>  The bonding driver is already an exercise in buffer management so adding this layer of indirection here makes
> sense in my opinion, as does hiding the details of the consituent interfaces where possible.

Can you explain how this new buffer management with the extra pointer copies improves the bonding itself performance?
Looks really strange to me.

> > > So I'd like to share this improvement rather than keeping it private
> > > - because I'm nice that way :-P
> > >
> > > > > > Did you check for other vendor PMDs? It may hurt performance
> > > > > > there..
> > > > > >
> > > > > > I don't know, but I suspect probably not.  For the most part
> > > > > > you are typically reading almost up to the vector requirement.
> > > > > > But if one slave has just a single packet, then you can't
> > > > > > vectorize on the next slave.
> > > > > >
> > > > >
> > > > > I don't think that the ring overhead is better for PMDs which
> > > > > are not using the vectorized instructions.
> > > > >
> > > > > The non-vectorized PMDs are usually quite slow.  The additional
> > > > > overhead doesn't make a difference in their performance.
> > > >
> > > > We should not do things worse than they are.
> > >
> > > There were no reports that this made things worse. The feedback from
> > > production was that it made things better.
> >
> > Yes, It may be good for specific slaves drivers but hurt another
> > slaves drivers, So maybe it should stay private to specific costumers using
> specific nics.
> >
> > Again, I can understand how this patch improves performance of some
> > PMDs therefore I think the bonding is not the place to add it but maybe
> some PMDs.


More information about the dev mailing list