[dpdk-dev] [PATCH v2] app/testpmd: fix MPLSoUDP encapsulation

Dekel Peled dekelp at mellanox.com
Thu Dec 6 09:17:37 CET 2018


Thanks, PSB.

> -----Original Message-----
> From: Ori Kam
> Sent: Tuesday, December 4, 2018 11:23 PM
> To: Dekel Peled <dekelp at mellanox.com>; wenzhuo.lu at intel.com;
> jingjing.wu at intel.com; bernard.iremonger at intel.com
> Cc: dev at dpdk.org; Shahaf Shuler <shahafs at mellanox.com>; Dekel Peled
> <dekelp at mellanox.com>
> Subject: RE: [dpdk-dev] [PATCH v2] app/testpmd: fix MPLSoUDP
> encapsulation
> 
> 
> 
> > -----Original Message-----
> > From: dev <dev-bounces at dpdk.org> On Behalf Of Dekel Peled
> > Sent: Tuesday, December 4, 2018 3:52 PM
> > To: wenzhuo.lu at intel.com; jingjing.wu at intel.com;
> > bernard.iremonger at intel.com
> > Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>; Shahaf Shuler
> > <shahafs at mellanox.com>; Dekel Peled <dekelp at mellanox.com>
> > Subject: [dpdk-dev] [PATCH v2] app/testpmd: fix MPLSoUDP encapsulation
> >
> > In function cmd_set_mplsoudp_encap_parsed(), MPLS label value was set
> > in mplsoudp_encap_conf struct without the required offset.
> > As a result the value was copied incorrectly into rte_flow_item_mpls
> > struct.
> >
> > This patch sets MPLS label value in appropriate location at
> > mplsoudp_encap_conf struct, so it is correctly copied to
> > rte_flow_item_mpls struct.
> >
> > Fixes: a1191d39cb57 ("app/testpmd: add MPLSoUDP encapsulation")
> > Cc: orika at mellanox.com
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> >
> > ---
> > v2: Update code fix and elaborate patch log for clarity.
> > ---
> > ---
> >  app/test-pmd/cmdline.c | 7 +++----
> >  1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> > 1275074..8630be6 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -15804,10 +15804,9 @@ static void
> > cmd_set_mplsoudp_encap_parsed(void *parsed_result,
> >  	struct cmd_set_mplsoudp_encap_result *res = parsed_result;
> >  	union {
> >  		uint32_t mplsoudp_label;
> > -		uint8_t label[3];
> > +		uint8_t label[4];
> >  	} id = {
> > -		.mplsoudp_label =
> > -			rte_cpu_to_be_32(res->label) &
> RTE_BE32(0x00ffffff),
> > +		.mplsoudp_label = rte_cpu_to_be_32(res->label<<12),
> 
> Why did you remove the mask?

The mask of all valid bits set to 1 is redundant.
After <<12 the 20 valid bits are not changed, and the other 12 bits are set to 0.

> 
> >  	};
> >
> >  	if (strcmp(res->mplsoudp, "mplsoudp_encap") == 0) @@ -15820,7
> > +15819,7 @@ static void cmd_set_mplsoudp_encap_parsed(void
> > *parsed_result,
> >  		mplsoudp_encap_conf.select_ipv4 = 0;
> >  	else
> >  		return;
> > -	rte_memcpy(mplsoudp_encap_conf.label, &id.label[1], 3);
> > +	rte_memcpy(mplsoudp_encap_conf.label, &id.label, 3);
> >  	mplsoudp_encap_conf.udp_src = rte_cpu_to_be_16(res->udp_src);
> >  	mplsoudp_encap_conf.udp_dst = rte_cpu_to_be_16(res->udp_dst);
> >  	if (mplsoudp_encap_conf.select_ipv4) {
> > --
> > 1.8.3.1
> 
> Best,
> Ori


More information about the dev mailing list