[dpdk-dev] [PATCH] ethdev: add function to print a flow
Asaf Penso
asafp at mellanox.com
Tue Dec 11 08:24:39 CET 2018
Regards,
Asaf Penso
> -----Original Message-----
> From: Stephen Hemminger <stephen at networkplumber.org>
> Sent: Thursday, December 6, 2018 11:44 PM
> To: Asaf Penso <asafp at mellanox.com>
> Cc: Adrien Mazarguil <adrien.mazarguil at 6wind.com>; dev at dpdk.org;
> Shahaf Shuler <shahafs at mellanox.com>; Ori Kam <orika at mellanox.com>;
> Thomas Monjalon <thomas at monjalon.net>
> Subject: Re: [dpdk-dev] [PATCH] ethdev: add function to print a flow
>
> On Wed, 28 Nov 2018 15:26:06 +0000
> Asaf Penso <asafp at mellanox.com> wrote:
>
> > Flow contains the following information: port id, attributes, patterns
> > and actions.
> > The function rte_flow_print prints all above information.
> >
> > It can be used for debugging purposes to validate the behavior of
> > different dpdk applications.
> >
> > Example: running testpmd with the following flow create:
> > flow create 1 transfer ingress
> > pattern eth src is 52:54:00:15:b1:b1 dst is 24:8A:07:8D:AE:C6 / end
> > actions of_push_vlan ethertype 0x8100 / of_set_vlan_vid vlan_vid 0x888
> > / of_set_vlan_pcp vlan_pcp 7 / port_id id 0 / end Will result in this
> > output:
> > Print flow info
> > port_id =1
> > group =0
> > priority =0
> > ingress =1
> > egress =0
> > transfer =1
> > group =0
> > reserved =0
> > pattern type =9
> > name=RTE_FLOW_ITEM_TYPE_ETH
> > spec type=0x0, src=52:54:00:15:b1:b1, dst=24:8a:07:8d:ae:c6
> > mask type=0x0, src=ff:ff:ff:ff:ff:ff, dst=ff:ff:ff:ff:ff:ff actions
> > type =23 name=RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN
> > ethertype=0x81
> > actions type =24
> > name=RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID
> > vlan_vid=0x8808
> > actions type =25
> > name=RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP
> > vlan_pcp=7
> > actions type =13
> > name=RTE_FLOW_ACTION_TYPE_PORT_ID
> > id=0
> > reserved=0
> >
> > Signed-off-by: Asaf Penso <asafp at mellanox.com>
> > ---
> > lib/librte_ethdev/rte_ethdev_version.map | 1 +
> > lib/librte_ethdev/rte_flow.c | 226
> ++++++++++++++++++++++++++++++
> > lib/librte_ethdev/rte_flow.h | 31 ++++
> > 3 files changed, 258 insertions(+), 0 deletions(-)
> >
> > diff --git a/lib/librte_ethdev/rte_ethdev_version.map
> > b/lib/librte_ethdev/rte_ethdev_version.map
> > index 92ac3de..7676983 100644
> > --- a/lib/librte_ethdev/rte_ethdev_version.map
> > +++ b/lib/librte_ethdev/rte_ethdev_version.map
> > @@ -249,6 +249,7 @@ EXPERIMENTAL {
> > rte_eth_switch_domain_free;
> > rte_flow_conv;
> > rte_flow_expand_rss;
> > + rte_flow_print;
> > rte_mtr_capabilities_get;
> > rte_mtr_create;
> > rte_mtr_destroy;
> > diff --git a/lib/librte_ethdev/rte_flow.c
> > b/lib/librte_ethdev/rte_flow.c index 3277be1..742d892 100644
> > --- a/lib/librte_ethdev/rte_flow.c
> > +++ b/lib/librte_ethdev/rte_flow.c
> > @@ -16,6 +16,8 @@
> > #include "rte_flow_driver.h"
> > #include "rte_flow.h"
> >
> > +int rte_flow_logtype;
> > +
> > /**
> > * Flow elements description tables.
> > */
> > @@ -202,6 +204,222 @@ struct rte_flow_desc_data {
> > NULL, rte_strerror(ENOSYS));
> > }
> >
> > +/* Example:
> > + *
> > + * struct eth_addr mac;
> > + * [...]
> > + * printf("The Ethernet address is "RTE_ETH_ADDR_FMT"\n",
> > + * RTE_ETH_ADDR_ARGS(mac));
> > + *
> > + */
> > +#define RTE_ETH_ADDR_FMT \
> > +
> "%02"PRIx8":%02"PRIx8":%02"PRIx8":%02"PRIx8":%02"PRIx8":%02"P
> RIx8
> > +#define RTE_ETH_ADDR_ARGS(addr)
> RTE_ETH_ADDR_BYTES_ARGS((addr).ea)
> > +#define RTE_ETH_ADDR_BYTES_ARGS(bytes) \
> > + (bytes)[0], (bytes)[1], (bytes)[2], (bytes)[3], (bytes)[4],
> > +(bytes)[5]
> > +
> > +/* Print the flow fields. */
> > +void __rte_experimental
> > +rte_flow_print(uint16_t port_id,
> > + const struct rte_flow_attr *attr,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[]) {
> > + RTE_FLOW_LOG(INFO, "Print flow info\n");
> > + RTE_FLOW_LOG(INFO, "port_id =%u\n", port_id);
> > + RTE_FLOW_LOG(INFO, "group =%u\n", attr->group);
> > + RTE_FLOW_LOG(INFO, "priority =%u\n", attr->priority);
> > + RTE_FLOW_LOG(INFO, "ingress =%u\n", attr->ingress);
> > + RTE_FLOW_LOG(INFO, "egress =%u\n", attr->egress);
> > + RTE_FLOW_LOG(INFO, "transfer =%u\n", attr->transfer);
> > + RTE_FLOW_LOG(INFO, "group =%u\n", attr->group);
> > + RTE_FLOW_LOG(INFO, "reserved =%u\n", attr->reserved);
> > +
> > + for (; pattern->type != RTE_FLOW_ITEM_TYPE_END; pattern++) {
> > + RTE_FLOW_LOG(INFO, "pattern type =%u\n", pattern-
> >type);
> > + switch (pattern->type) {
> > + case RTE_FLOW_ITEM_TYPE_ETH: {
> > + RTE_FLOW_LOG(INFO, "
> name=RTE_FLOW_ITEM_TYPE_ETH\n");
> > + if (pattern->spec) {
> > + const struct rte_flow_item_eth *spec =
> > + pattern->spec;
> > + RTE_FLOW_LOG(INFO, " spec type=0x%x, "
> > + "src="RTE_ETH_ADDR_FMT",
> dst="RTE_ETH_ADDR_FMT
> > + "\n",
> > + spec->type,
> > + RTE_ETH_ADDR_BYTES_ARGS(spec-
> >src.addr_bytes),
> > + RTE_ETH_ADDR_BYTES_ARGS(spec-
> >dst.addr_bytes));
> > + }
> > +
> > + if (pattern->mask) {
> > + const struct rte_flow_item_eth *mask =
> > + pattern->mask;
> > + RTE_FLOW_LOG(INFO, " mask type=0x%x, "
> > + "src="RTE_ETH_ADDR_FMT",
> dst="RTE_ETH_ADDR_FMT
> > + "\n",
> > + mask->type,
> > + RTE_ETH_ADDR_BYTES_ARGS(mask-
> >src.addr_bytes),
> > + RTE_ETH_ADDR_BYTES_ARGS(mask-
> >dst.addr_bytes));
> > + }
> > + break;
> > + }
> > + case RTE_FLOW_ITEM_TYPE_VLAN: {
> > + RTE_FLOW_LOG(INFO, "
> name=RTE_FLOW_ITEM_TYPE_VLAN\n");
> > + if (pattern->spec) {
> > + const struct rte_flow_item_vlan *spec =
> > + pattern->spec;
> > + RTE_FLOW_LOG(INFO, " spec tci=0x%x\n",
> > + spec->tci);
> > + RTE_FLOW_LOG(INFO, " spec
> inner_type=%u\n",
> > + spec->inner_type);
> > + }
> > + if (pattern->mask) {
> > + const struct rte_flow_item_vlan *mask =
> > + pattern->mask;
> > + RTE_FLOW_LOG(INFO, " mask tci=0x%x\n",
> > + mask->tci);
> > + RTE_FLOW_LOG(INFO, " mask
> inner_type=%u\n",
> > + mask->inner_type);
> > + }
> > + break;
> > + }
> > + case RTE_FLOW_ITEM_TYPE_IPV4: {
> > + RTE_FLOW_LOG(INFO, "
> name=RTE_FLOW_ITEM_TYPE_IPV4\n");
> > + if (pattern->spec) {
> > + const struct rte_flow_item_ipv4 *spec =
> > + pattern->spec;
> > + RTE_FLOW_LOG(INFO, " spec
> version_ihl=%u\n",
> > + spec->hdr.version_ihl);
> > + RTE_FLOW_LOG(INFO, " spec
> type_of_service=%u\n",
> > + spec->hdr.type_of_service);
> > + RTE_FLOW_LOG(INFO, " spec
> total_length=%u\n",
> > + spec->hdr.total_length);
> > + RTE_FLOW_LOG(INFO, " spec
> packet_id=%u\n",
> > + spec->hdr.packet_id);
> > + RTE_FLOW_LOG(INFO, " spec
> fragment_offset=%u\n",
> > + spec->hdr.fragment_offset);
> > + RTE_FLOW_LOG(INFO, " spec
> time_to_live=%u\n",
> > + spec->hdr.time_to_live);
> > + RTE_FLOW_LOG(INFO, " spec
> next_proto_id=%u\n",
> > + spec->hdr.next_proto_id);
> > + RTE_FLOW_LOG(INFO, " spec
> hdr_checksum=0x%x\n",
> > + spec->hdr.hdr_checksum);
> > + RTE_FLOW_LOG(INFO,
> > + " spec src_addr=%d.%d.%d.%d\n",
> > + (spec->hdr.src_addr & 0x000000FF),
> > + (spec->hdr.src_addr & 0x0000FF00)
> >> 8,
> > + (spec->hdr.src_addr & 0x00FF0000)
> >> 16,
> > + (spec->hdr.src_addr & 0xFF000000)
> > + >> 24);
> > + RTE_FLOW_LOG(INFO,
> > + " spec dst_addr=%d.%d.%d.%d\n",
> > + (spec->hdr.dst_addr & 0x000000FF),
> > + (spec->hdr.dst_addr & 0x0000FF00)
> >> 8,
> > + (spec->hdr.dst_addr & 0x00FF0000)
> >> 16,
> > + (spec->hdr.dst_addr & 0xFF000000)
> > + >> 24);
> > + }
> > +
> > + if (pattern->mask) {
> > + const struct rte_flow_item_ipv4 *mask =
> > + pattern->mask;
> > + RTE_FLOW_LOG(INFO, " mask
> version_ihl=%u\n",
> > + mask->hdr.version_ihl);
> > + RTE_FLOW_LOG(INFO, " mask
> type_of_service=%u\n",
> > + mask->hdr.type_of_service);
> > + RTE_FLOW_LOG(INFO, " mask
> total_length=%u\n",
> > + mask->hdr.total_length);
> > + RTE_FLOW_LOG(INFO, " mask
> packet_id=%u\n",
> > + mask->hdr.packet_id);
> > + RTE_FLOW_LOG(INFO, " mask
> fragment_offset=%u\n",
> > + mask->hdr.fragment_offset);
> > + RTE_FLOW_LOG(INFO, " mask
> time_to_live=%u\n",
> > + mask->hdr.time_to_live);
> > + RTE_FLOW_LOG(INFO, " mask
> next_proto_id=%u\n",
> > + mask->hdr.next_proto_id);
> > + RTE_FLOW_LOG(INFO, " mask
> hdr_checksum=0x%x\n",
> > + mask->hdr.hdr_checksum);
> > + RTE_FLOW_LOG(INFO,
> > + " mask src_addr=%d.%d.%d.%d\n",
> > + (mask->hdr.src_addr & 0x000000FF),
> > + (mask->hdr.src_addr & 0x0000FF00)
> >> 8,
> > + (mask->hdr.src_addr & 0x00FF0000)
> >> 16,
> > + (mask->hdr.src_addr & 0xFF000000)
> > + >> 24);
> > + RTE_FLOW_LOG(INFO,
> > + " mask dst_addr=%d.%d.%d.%d\n",
> > + (mask->hdr.dst_addr & 0x000000FF),
> > + (mask->hdr.dst_addr & 0x0000FF00)
> >> 8,
> > + (mask->hdr.dst_addr & 0x00FF0000)
> >> 16,
> > + (mask->hdr.dst_addr & 0xFF000000)
> > + >> 24);
> > + }
> > + break;
> > + }
> > + default:
> > + RTE_FLOW_LOG(INFO, "unfamiliar pattern item\n");
> > + }
> > + }
> > +
> > + for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
> > + RTE_FLOW_LOG(INFO, "actions type =%u\n", actions-
> >type);
> > + switch (actions->type) {
> > + case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN: {
> > + RTE_FLOW_LOG(INFO,
> > + "
> name=RTE_FLOW_ACTION_TYPE_OF_POP_VLAN\n");
> > + break;
> > + }
> > + case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN: {
> > + RTE_FLOW_LOG(INFO,
> > + "
> name=RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN\n");
> > + if (actions->conf) {
> > + const struct rte_flow_action_of_push_vlan
> > + *conf = actions->conf;
> > + RTE_FLOW_LOG(INFO, "
> ethertype=0x%x\n",
> > + conf->ethertype);
> > + }
> > + break;
> > + }
> > + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID: {
> > + RTE_FLOW_LOG(INFO,
> > + "
> name=RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID\n");
> > + if (actions->conf) {
> > + const struct
> rte_flow_action_of_set_vlan_vid
> > + *conf = actions->conf;
> > + RTE_FLOW_LOG(INFO, " vlan_vid=0x%x\n",
> > + conf->vlan_vid);
> > + }
> > + break;
> > + }
> > + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP: {
> > + RTE_FLOW_LOG(INFO,
> > + "
> name=RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP\n");
> > + if (actions->conf) {
> > + const struct
> rte_flow_action_of_set_vlan_pcp
> > + *conf = actions->conf;
> > + RTE_FLOW_LOG(INFO, " vlan_pcp=%u\n",
> > + conf->vlan_pcp);
> > + }
> > + break;
> > + }
> > + case RTE_FLOW_ACTION_TYPE_PORT_ID: {
> > + RTE_FLOW_LOG(INFO,
> > + "
> name=RTE_FLOW_ACTION_TYPE_PORT_ID\n");
> > + if (actions->conf) {
> > + const struct rte_flow_action_port_id
> > + *conf = actions->conf;
> > + RTE_FLOW_LOG(INFO, " id=%u\n", conf-
> >id);
> > + RTE_FLOW_LOG(INFO, " reserved=%u\n",
> > + conf->reserved);
> > + }
> > + break;
> > + }
> > + default:
> > + RTE_FLOW_LOG(INFO, "unfamiliar action item\n");
> > + }
> > + }
> > +}
> > +
> > /* Create a flow rule on a given port. */ struct rte_flow *
> > rte_flow_create(uint16_t port_id, @@ -1001,3 +1219,11 @@ enum
> > rte_flow_conv_item_spec_type {
> > };
> > return lsize;
> > }
> > +
> > +RTE_INIT(flow_init_log)
> > +{
> > + rte_flow_logtype = rte_log_register("lib.flow");
> > + if (rte_flow_logtype >= 0)
> > + rte_log_set_level(rte_flow_logtype, RTE_LOG_INFO); }
> > +
> > diff --git a/lib/librte_ethdev/rte_flow.h
> > b/lib/librte_ethdev/rte_flow.h index c0fe879..0a7e70b 100644
> > --- a/lib/librte_ethdev/rte_flow.h
> > +++ b/lib/librte_ethdev/rte_flow.h
> > @@ -28,6 +28,12 @@
> > #include <rte_udp.h>
> > #include <rte_byteorder.h>
> > #include <rte_esp.h>
> > +#include <rte_log.h>
> > +
> > +extern int rte_flow_logtype;
> > +
> > +#define RTE_FLOW_LOG(level, ...) \
> > + rte_log(RTE_LOG_ ## level, rte_flow_logtype, "" __VA_ARGS__)
> >
> > #ifdef __cplusplus
> > extern "C" {
> > @@ -2414,6 +2420,31 @@ enum rte_flow_conv_op {
> > struct rte_flow_error *error);
> >
> > /**
> > + * Print the flow fields.
> > + *
> > + * The flow contains the port id, different attributes, the pattern's
> > + * items and the action's items, which are all being printed.
> > + *
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * @param port_id
> > + * Port identifier of Ethernet device.
> > + * @param[in] attr
> > + * Flow rule attributes.
> > + * @param[in] pattern
> > + * Pattern specification (list terminated by the END pattern item).
> > + * @param[in] actions
> > + * Associated actions (list terminated by the END action).
> > + *
> > + * @note not all enum values of patterns and actions are printed.
> > + */
> > +void __rte_experimental
> > +rte_flow_print(uint16_t port_id,
> > + const struct rte_flow_attr *attr,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[]);
> > +
> > +/**
> > * Create a flow rule on a given port.
> > *
> > * @param port_id
>
> Since this is a debug function, it would make more sense for it to take a 'FILE
> *'
> for output like the other debug functions do. That would make it consistent
> with rte_pktmbuf_dump rte_event_dev_dump, rte_mempool_dump, etc.
>
> Why not name it rte_flow_dump?
Thanks for pointing this out. I'll consider renaming and make it accept a file.
I'll wait for more comments first before uploading another version of the patch.
More information about the dev
mailing list