[dpdk-dev] [PATCH v3 33/34] doc: add ICE description and update release note
Wenzhuo Lu
wenzhuo.lu at intel.com
Wed Dec 12 08:00:03 CET 2018
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
MAINTAINERS | 1 +
doc/guides/nics/features/ice.ini | 38 +++++++++++++
doc/guides/nics/ice.rst | 101 +++++++++++++++++++++++++++++++++
doc/guides/rel_notes/release_19_02.rst | 4 ++
4 files changed, 144 insertions(+)
create mode 100644 doc/guides/nics/features/ice.ini
create mode 100644 doc/guides/nics/ice.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 37f3bf7..cd01565 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -598,6 +598,7 @@ M: Qiming Yang <qiming.yang at intel.com>
M: Wenzhuo Lu <wenzhuo.lu at intel.com>
T: git://dpdk.org/next/dpdk-next-net-intel
F: drivers/net/ice/
+F: doc/guides/nics/features/ice*.ini
Marvell mvpp2
M: Tomasz Duszynski <tdu at semihalf.com>
diff --git a/doc/guides/nics/features/ice.ini b/doc/guides/nics/features/ice.ini
new file mode 100644
index 0000000..196b8d5
--- /dev/null
+++ b/doc/guides/nics/features/ice.ini
@@ -0,0 +1,38 @@
+;
+; Supported features of the 'ice' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = Y
+Link status = Y
+Link status event = Y
+Rx interrupt = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Scattered Rx = Y
+TSO = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+RSS hash = Y
+RSS key update = Y
+RSS reta update = Y
+VLAN filter = Y
+CRC offload = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Packet type parsing = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
+Basic stats = Y
+Extended stats = Y
+FW version = Y
+Module EEPROM dump = Y
+BSD nic_uio = Y
+Linux UIO = Y
+Linux VFIO = Y
+x86-32 = Y
+x86-64 = Y
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
new file mode 100644
index 0000000..95b409a
--- /dev/null
+++ b/doc/guides/nics/ice.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2018 Intel Corporation.
+
+ICE Poll Mode Driver
+======================
+
+The ice PMD (librte_pmd_ice) provides poll mode driver support for
+10/25 Gbps Intel® Ethernet 810 Series Network Adapters based on
+the Intel Ethernet Controller E810.
+
+
+Prerequisites
+-------------
+
+- Identifying your adapter using `Intel Support
+ <http://www.intel.com/support>`_ and get the latest NVM/FW images.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+- To get better performance on Intel platforms, please follow the "How to get best performance with NICs on Intel platforms"
+ section of the :ref:`Getting Started Guide for Linux <linux_gsg>`.
+
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_ICE_PMD`` (default ``y``)
+
+ Toggle compilation of the ``librte_pmd_ice`` driver.
+
+- ``CONFIG_RTE_LIBRTE_ICE_DEBUG_*`` (default ``n``)
+
+ Toggle display of generic debugging messages.
+
+- ``CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC`` (default ``y``)
+
+ Toggle bulk allocation for RX.
+
+- ``CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC`` (default ``n``)
+
+ Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte.
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+
+Sample Application Notes
+------------------------
+
+Vlan filter
+~~~~~~~~~~~
+
+Vlan filter only works when Promiscuous mode is off.
+
+To start ``testpmd``, and add vlan 10 to port 0:
+
+.. code-block:: console
+
+ ./app/testpmd -l 0-15 -n 4 -- -i
+ ...
+
+ testpmd> rx_vlan add 10 0
+
+
+Limitations or Known issues
+---------------------------
+
+19.02 limitation
+~~~~~~~~~~~~~~~~
+
+Ice code released in 19.02 is for evaluation only.
+
+
+Secondary Process
+~~~~~~~~~~~~~~~~~
+Ice supports secondary process. But it does not support changing the setting
+and configuration in the secondary process.
+
+
+Promiscuous mode not supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+As promiscuous mode is not supported as this stage, a port can only receive the
+packets which destination MAC address is this port's own.
+
+
+TX anti-spoofing cannot be disabled
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+TX anti-spoofing is enabled by default. At this stage it's not supported to
+disable it. So any TX packet which source MAC address is not this port's own
+will be dropped by HW. It means io-fwd is not supported now. Recommand to use
+MAC-fwd for evaluation.
diff --git a/doc/guides/rel_notes/release_19_02.rst b/doc/guides/rel_notes/release_19_02.rst
index a94fa86..c5a054b 100644
--- a/doc/guides/rel_notes/release_19_02.rst
+++ b/doc/guides/rel_notes/release_19_02.rst
@@ -54,6 +54,10 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Added ICE net PMD**
+
+ Added the new ``ice`` net driver for Intel® Ethernet Network Adapters E810.
+ See the :doc:`../nics/ice` NIC guide for more details on this new driver.
Removed Items
-------------
--
1.9.3
More information about the dev
mailing list