[dpdk-dev] [PATCH v2 2/2] doc: update mlx PMD required OFED version

Shahaf Shuler shahafs at mellanox.com
Sun Feb 4 08:08:06 CET 2018


Signed-off-by: Shahaf Shuler <shahafs at mellanox.com>
---

On v2:
 - Updated the OFED version for mlx4 guide as well.

---
 doc/guides/nics/mlx4.rst | 2 +-
 doc/guides/nics/mlx5.rst | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index 88161781c..13cc6ec8a 100644
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -219,7 +219,7 @@ Current RDMA core package and Linux kernel (recommended)
 Mellanox OFED as a fallback
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- `Mellanox OFED`_ version: **4.2**.
+- `Mellanox OFED`_ version: **4.2, 4.3**.
 - firmware version: **2.42.5000** and above.
 
 .. _`Mellanox OFED`: http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index a9e4bf51a..b2376363b 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -131,7 +131,7 @@ Limitations
 - A multi segment packet must have less than 6 segments in case the Tx burst function
   is set to multi-packet send or Enhanced multi-packet send. Otherwise it must have
   less than 50 segments.
-- Count action for RTE flow is only supported in Mellanox OFED 4.2.
+- Count action for RTE flow is only supported in Mellanox OFED 4.2 and above.
 - Flows with a VXLAN Network Identifier equal (or ends to be equal)
   to 0 are not supported.
 - VXLAN TSO and checksum offloads are not supported on VM.
@@ -392,7 +392,7 @@ RMDA Core with Linux Kernel
 Mellanox OFED
 ^^^^^^^^^^^^^
 
-- Mellanox OFED version: **4.2**.
+- Mellanox OFED version: **4.2, 4.3**.
 - firmware version:
 
   - ConnectX-4: **12.21.1000** and above.
-- 
2.12.0



More information about the dev mailing list