[dpdk-dev] [PATCH v4] net/mlx5: load libmlx5 and libibverbs in run-time
Shachar Beiser
shacharbe at mellanox.com
Wed Jan 3 16:00:46 CET 2018
> -----Original Message-----
> From: Nelio Laranjeiro [mailto:nelio.laranjeiro at 6wind.com]
> Sent: Tuesday, January 2, 2018 4:07 PM
> To: Shachar Beiser <shacharbe at mellanox.com>
> Cc: dev at dpdk.org; Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> Subject: Re: [PATCH v4] net/mlx5: load libmlx5 and libibverbs in run-time
>
> Hi Shachar,
>
> Please see small comment bellow,
>
> On Sun, Dec 31, 2017 at 07:52:51AM +0000, Shachar Beiser wrote:
> > MLX5 PMD loads libraries: libibverbs and libmlx5.
> > MLX5 PMD is not linked to external libraries.
> >
> > Signed-off-by: Shachar Beiser <shacharbe at mellanox.com>
> > ---
> > v1:
> > load external libraries in run-time
> > v2:
> > * fix checkpatch warnings
> > v3:
> > * fix checkpatch warnings
> > v4:
> > New MACROs in order to reuse code
> > ---
> > config/common_base | 1 +
> > drivers/net/mlx5/Makefile | 22 ++-
> > drivers/net/mlx5/lib/mlx5_dll.c | 294
> > +++++++++++++++++++++++++++++++++++++++
> > drivers/net/mlx5/lib/mlx5_dll.h | 103 ++++++++++++++
> > drivers/net/mlx5/mlx5.c | 17 ++-
> > drivers/net/mlx5/mlx5.h | 4 +
> > drivers/net/mlx5/mlx5_flow.c | 4 +
> > drivers/net/mlx5/mlx5_mac.c | 4 +
> > drivers/net/mlx5/mlx5_mr.c | 4 +
> > drivers/net/mlx5/mlx5_rss.c | 4 +
> > drivers/net/mlx5/mlx5_rxmode.c | 4 +
> > drivers/net/mlx5/mlx5_rxq.c | 4 +
> > drivers/net/mlx5/mlx5_rxtx.c | 4 +
> > drivers/net/mlx5/mlx5_rxtx.h | 6 +-
> > drivers/net/mlx5/mlx5_rxtx_vec.c | 4 +
> > drivers/net/mlx5/mlx5_txq.c | 4 +
> > mk/rte.app.mk | 8 +-
> > 17 files changed, 479 insertions(+), 12 deletions(-) create mode
> > 100644 drivers/net/mlx5/lib/mlx5_dll.c create mode 100644
> > drivers/net/mlx5/lib/mlx5_dll.h
> >
> > diff --git a/config/common_base b/config/common_base index
> > b8ee8f9..30c8fcf 100644
> > --- a/config/common_base
> > +++ b/config/common_base
> > @@ -236,6 +236,7 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
> > # Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
> > # CONFIG_RTE_LIBRTE_MLX5_PMD=n
> > +CONFIG_RTE_LIBRTE_MLX5_DLL=y
> > CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
> > CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
>
> Not sure a new configuration item is allowed. If it is, the documentation of
> such variable is missing.
[S.B] The patch is based on this CONFIG_RTE_LIBRTE_MLX5_DLL , it was required by Adrian in the design phase to enable/disable this linkage mode.
I will update the documentation .
>
> > diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> > index a3984eb..24fa127 100644
> > --- a/drivers/net/mlx5/Makefile
> > +++ b/drivers/net/mlx5/Makefile
> > @@ -53,18 +53,25 @@ SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) +=
> mlx5_rss.c
> > SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
> > SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
> > SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c
> > -
> > +ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLL),y)
> > +SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += lib/mlx5_dll.c endif
> > # Basic CFLAGS.
> > CFLAGS += -O3
> > CFLAGS += -std=c11 -Wall -Wextra
> > CFLAGS += -g
> > CFLAGS += -I.
> > +CFLAGS += -I$(SRCDIR)
> > CFLAGS += -D_BSD_SOURCE
> > CFLAGS += -D_DEFAULT_SOURCE
> > CFLAGS += -D_XOPEN_SOURCE=600
> > CFLAGS += $(WERROR_FLAGS)
> > CFLAGS += -Wno-strict-prototypes
> > +ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLL),y) LDLIBS += -ldl else
> > LDLIBS += -libverbs -lmlx5
> > +endif
> > LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS +=
> > -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci @@
> > -105,26 +112,28 @@ endif
> >
> > mlx5_autoconf.h.new: FORCE
> >
> > +VERBS_H := infiniband/verbs.h
> > +MLX5DV_H := infiniband/mlx5dv.h
> > mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
> > $Q $(RM) -f -- '$@'
> > $Q sh -- '$<' '$@' \
> > HAVE_IBV_DEVICE_VXLAN_SUPPORT \
> > - infiniband/verbs.h \
> > + $(VERBS_H) \
> > enum IBV_DEVICE_VXLAN_SUPPORT \
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > HAVE_IBV_WQ_FLAG_RX_END_PADDING \
> > - infiniband/verbs.h \
> > + $(VERBS_H) \
> > enum IBV_WQ_FLAG_RX_END_PADDING \
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > HAVE_IBV_MLX5_MOD_MPW \
> > - infiniband/mlx5dv.h \
> > + $(MLX5DV_H) \
> > enum MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED \
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > HAVE_IBV_MLX5_MOD_CQE_128B_COMP \
> > - infiniband/mlx5dv.h \
> > + $(MLX5DV_H) \
> > enum MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP \
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > @@ -144,10 +153,9 @@ mlx5_autoconf.h.new:
> $(RTE_SDK)/buildtools/auto-config-h.sh
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT \
> > - infiniband/verbs.h \
> > + $(VERBS_H) \
> > enum IBV_FLOW_SPEC_ACTION_COUNT \
> > $(AUTOCONF_OUTPUT)
>
> This modification should be inside its own patch, it is not directly related to
> the this patch itself.
[S.B] I can revert the VERBS_H , MLX5DV_H and not change it all .
There is no need to change in a different patch.
>
> > -
> > # Create mlx5_autoconf.h or update it in case it differs from the new one.
> >
> > mlx5_autoconf.h: mlx5_autoconf.h.new
> <snip/>
> > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> > cd66fe1..eeef782 100644
> > --- a/drivers/net/mlx5/mlx5.c
> > +++ b/drivers/net/mlx5/mlx5.c
> > @@ -30,7 +30,8 @@
> > * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF THE USE
> > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > */
> > -
> > +#define _GNU_SOURCE
> > +#include <stdio.h>
> > #include <stddef.h>
> > #include <unistd.h>
> > #include <string.h>
> > @@ -39,13 +40,17 @@
> > #include <stdlib.h>
> > #include <errno.h>
> > #include <net/if.h>
> > -
> > +#include <dlfcn.h>
>
> The empty line should remain.
[S.B] OK.
>
> > /* Verbs header. */
> > /* ISO C doesn't support unnamed structs/unions, disabling -pedantic.
> > */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic"
> > #endif
> > +#ifdef RTE_LIBRTE_MLX5_DLL
> > +#include "lib/mlx5_dll.h"
> > +#else
> > #include <infiniband/verbs.h>
> > +#endif
>
> This could be done by the mlx5_dll.h file which could include the correct
> header according to the configuration.
[S.B] I guess you refer to all *.c files that includes the verbs.h .
I will change them all ?
>
> <snip/>
> > diff --git a/mk/rte.app.mk b/mk/rte.app.mk index 6a6a745..2dd2f6b
> > 100644
> > --- a/mk/rte.app.mk
> > +++ b/mk/rte.app.mk
> > @@ -51,7 +51,9 @@ endif
> >
> > # Link only the libraries used in the application LDFLAGS +=
> > --as-needed
> > -
> > +ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLL),y) LDFLAGS += -ldl endif
> > # default path for libs
> > _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
> >
> > @@ -142,7 +144,11 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) +=
> -lrte_pmd_kni
> > endif
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -
> libverbs -lmlx4
> > +ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLL),y)
> > +_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -ldl
> > +else
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -
> libverbs -lmlx5
> > +endif
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += -lrte_pmd_mrvl -
> L$(LIBMUSDK_PATH)/lib -lmusdk
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
> > --
> > 1.8.3.1
> >
>
> Thanks,
>
> --
> Nélio Laranjeiro
> 6WIND
More information about the dev
mailing list