[dpdk-dev] [PATCH v3 5/8] net/vdev_netvsc: implement core functionality
Matan Azrad
matan at mellanox.com
Wed Jan 10 16:02:59 CET 2018
Hi Stephan
Thank you for this quick review, please see some comments.
From: Stephen Hemminger, Tuesday, January 9, 2018 8:49 PM
> On Tue, 9 Jan 2018 14:47:30 +0000
> Matan Azrad <matan at mellanox.com> wrote:
>
> > As described in more details in the attached documentation (see patch
> > contents), this virtual device driver manages NetVSC interfaces in
> > virtual machines hosted by Hyper-V/Azure platforms.
> >
> > This driver does not manage traffic nor Ethernet devices directly; it
> > acts as a thin configuration layer that automatically instantiates and
> > controls fail-safe PMD instances combining tap and PCI sub-devices, so
> > that each NetVSC interface is exposed as a single consolidated port to
> > DPDK applications.
> >
> > PCI sub-devices being hot-pluggable (e.g. during VM migration),
> > applications automatically benefit from increased throughput when
> > present and automatic fallback on NetVSC otherwise without
> > interruption thanks to fail-safe's hot-plug handling.
> >
> > Once initialized, the sole job of the vdev_netvsc driver is to
> > regularly scan for PCI devices to associate with NetVSC interfaces and
> > feed their addresses to corresponding fail-safe instances.
> >
> > Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> > Signed-off-by: Matan Azrad <matan at mellanox.com>
>
>
> There is also the issue of how rescind is handled, but that may be more
> complex than you want to deal with now. Host may rescind PCI devices for
> other reasons than migration. For example, if host needs to do live upgrade
> of PF device driver on host (or firmware); then it will rescind VF device from
> all guests and then restore it after upgrade.
>
> > diff --git a/drivers/net/vdev_netvsc/Makefile
> > b/drivers/net/vdev_netvsc/Makefile
> > index 2fb059d..f2b2ac5 100644
> > --- a/drivers/net/vdev_netvsc/Makefile
> > +++ b/drivers/net/vdev_netvsc/Makefile
> > @@ -13,6 +13,9 @@ EXPORT_MAP := rte_pmd_vdev_netvsc_version.map
> > CFLAGS += -O3 CFLAGS += -g CFLAGS += -std=c11 -pedantic -Wall
> > -Wextra
> > +CFLAGS += -D_XOPEN_SOURCE=600
> > +CFLAGS += -D_BSD_SOURCE
> > +CFLAGS += -D_DEFAULT_SOURCE
>
>
> These are kind of a nuisance, can't it just use same CFLAGS as other code?
>
Will check.
> > # Source files.
> > SRCS-$(CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD) += vdev_netvsc.c diff
> --git
> > a/drivers/net/vdev_netvsc/vdev_netvsc.c
> > b/drivers/net/vdev_netvsc/vdev_netvsc.c
> > index e895b32..3d8895b 100644
> > --- a/drivers/net/vdev_netvsc/vdev_netvsc.c
> > +++ b/drivers/net/vdev_netvsc/vdev_netvsc.c
> > @@ -3,17 +3,41 @@
> > * Copyright 2017 Mellanox Technologies, Ltd.
>
> >
> > #define VDEV_NETVSC_DRIVER net_vdev_netvsc #define
> > VDEV_NETVSC_ARG_IFACE "iface"
> > #define VDEV_NETVSC_ARG_MAC "mac"
> > +#define VDEV_NETVSC_PROBE_MS 1000
> > +
> > +#define NETVSC_CLASS_ID "{f8615163-df3e-46c5-913f-f2d2f965ed0e}"
> >
> > #define DRV_LOG(level, ...) \
> > rte_log(RTE_LOG_ ## level, \
> > @@ -25,12 +49,490 @@
> > /** Driver-specific log messages type. */ static int
> > vdev_netvsc_logtype;
> >
> > +/** Context structure for a vdev_netvsc instance. */ struct
> > +vdev_netvsc_ctx {
> > + LIST_ENTRY(vdev_netvsc_ctx) entry; /**< Next entry in list. */
> > + unsigned int id; /**< ID used to generate unique names. */
> > + char name[64]; /**< Unique name for vdev_netvsc instance. */
> > + char devname[64]; /**< Fail-safe PMD instance name. */
> > + char devargs[256]; /**< Fail-safe PMD instance device arguments. */
> > + char if_name[IF_NAMESIZE]; /**< NetVSC netdevice name. */
> > + unsigned int if_index; /**< NetVSC netdevice index. */
> > + struct ether_addr if_addr; /**< NetVSC MAC address. */
> > + int pipe[2]; /**< Communication pipe with fail-safe instance. */
> > + char yield[256]; /**< Current device string used with fail-safe. */
> > +};
>
> Please align comments.
>
Sure.
> > +/** Context list is common to all driver instances. */ static
> > +LIST_HEAD(, vdev_netvsc_ctx) vdev_netvsc_ctx_list =
> > + LIST_HEAD_INITIALIZER(vdev_netvsc_ctx_list);
> > +
> > +/** Number of entries in context list. */ static unsigned int
> > +vdev_netvsc_ctx_count;
> > +
> > /** Number of driver instances relying on context list. */ static
> > unsigned int vdev_netvsc_ctx_inst;
> >
> > /**
> > + * Destroy a vdev_netvsc context instance.
> > + *
> > + * @param ctx
> > + * Context to destroy.
> > + */
> > +static void
> > +vdev_netvsc_ctx_destroy(struct vdev_netvsc_ctx *ctx) {
> > + if (ctx->pipe[0] != -1)
> > + close(ctx->pipe[0]);
> > + if (ctx->pipe[1] != -1)
> > + close(ctx->pipe[1]);
> > + free(ctx);
> > +}
> > +
> > +/**
> > + * Iterate over system network interfaces.
> > + *
> > + * This function runs a given callback function for each netdevice
> > +found on
> > + * the system.
> > + *
> > + * @param func
> > + * Callback function pointer. List traversal is aborted when this function
> > + * returns a nonzero value.
> > + * @param ...
> > + * Variable parameter list passed as @p va_list to @p func.
> > + *
> > + * @return
> > + * 0 when the entire list is traversed successfully, a negative error code
> > + * in case or failure, or the nonzero value returned by @p func when list
> > + * traversal is aborted.
> > + */
> > +static int
> > +vdev_netvsc_foreach_iface(int (*func)(const struct if_nameindex *iface,
> > + const struct ether_addr *eth_addr,
> > + va_list ap), ...)
> > +{
> > + struct if_nameindex *iface = if_nameindex();
> > + int s = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
> > + unsigned int i;
> > + int ret = 0;
> > +
> > + if (!iface) {
> > + ret = -ENOBUFS;
> > + DRV_LOG(ERR, "cannot retrieve system network
> interfaces");
> > + goto error;
> > + }
> > + if (s == -1) {
> > + ret = -errno;
> > + DRV_LOG(ERR, "cannot open socket: %s",
> rte_strerror(errno));
> > + goto error;
> > + }
> > + for (i = 0; iface[i].if_name; ++i) {
> > + struct ifreq req;
> > + struct ether_addr eth_addr;
> > + va_list ap;
> > +
> > + strncpy(req.ifr_name, iface[i].if_name,
> sizeof(req.ifr_name));
> > + if (ioctl(s, SIOCGIFHWADDR, &req) == -1) {
> > + DRV_LOG(WARNING, "cannot retrieve information
> about"
> > + " interface \"%s\": %s",
> > + req.ifr_name, rte_strerror(errno));
> > + continue;
> > + }
>
> Skip non-ethernet interfaces where addr length != 6
>
Will check.
> > + memcpy(eth_addr.addr_bytes, req.ifr_hwaddr.sa_data,
> > + RTE_DIM(eth_addr.addr_bytes));
> > + va_start(ap, func);
> > + ret = func(&iface[i], ð_addr, ap);
> > + va_end(ap);
> > + if (ret)
> > + break;
> > + }
> > +error:
> > + if (s != -1)
> > + close(s);
> > + if (iface)
> > + if_freenameindex(iface);
> > + return ret;
> > +}
> > +
> > +/**
> > + * Determine if a network interface is NetVSC.
> > + *
> > + * @param[in] iface
> > + * Pointer to netdevice description structure (name and index).
> > + *
> > + * @return
> > + * A nonzero value when interface is detected as NetVSC. In case of
> error,
> > + * rte_errno is updated and 0 returned.
> > + */
> > +static int
> > +vdev_netvsc_iface_is_netvsc(const struct if_nameindex *iface) {
> > + static const char temp[] = "/sys/class/net/%s/device/class_id";
> > + char path[sizeof(temp) + IF_NAMESIZE];
> > + FILE *f;
> > + int ret;
> > + int len = 0;
> > +
> > + ret = snprintf(path, sizeof(path), temp, iface->if_name);
> > + if (ret == -1 || (size_t)ret >= sizeof(path)) {
> > + rte_errno = ENOBUFS;
> > + return 0;
> > + }
> > + f = fopen(path, "r");
> > + if (!f) {
> > + rte_errno = errno;
> > + return 0;
> > + }
> > + ret = fscanf(f, NETVSC_CLASS_ID "%n", &len);
> This is different way to compare uuid, maybe use fgets() and uuid_compare?
>
Different and nice.
I don't see a reason to replace it.
> > + if (ret == EOF)
> > + rte_errno = errno;
> > + ret = len == (int)strlen(NETVSC_CLASS_ID);
> > + fclose(f);
> > + return ret;
> > +}
> > +
> > +/**
> > + * Retrieve network interface data from sysfs symbolic link.
> > + *
> > + * @param[out] buf
> > + * Output data buffer.
> > + * @param size
> > + * Output buffer size.
> > + * @param[in] if_name
> > + * Netdevice name.
> > + * @param[in] relpath
> > + * Symbolic link path relative to netdevice sysfs entry.
> > + *
> > + * @return
> > + * 0 on success, a negative error code otherwise.
> > + */
> > +static int
> > +vdev_netvsc_sysfs_readlink(char *buf, size_t size, const char *if_name,
> > + const char *relpath)
> > +{
> > + int ret;
> > +
> > + ret = snprintf(buf, size, "/sys/class/net/%s/%s", if_name, relpath);
> > + if (ret == -1 || (size_t)ret >= size)
> > + return -ENOBUFS;
> > + ret = readlink(buf, buf, size);
> > + if (ret == -1)
> > + return -errno;
> > + if ((size_t)ret >= size - 1)
> > + return -ENOBUFS;
> > + buf[ret] = '\0';
> > + return 0;
> > +}
>
> You might find it easier to look at directory.
> /sys/bus/vmbus/drivers/hv_netvsc/
>
This driver allows to run regular netdevice instead of NetVSC(as described in doc) for debug purpose(even in non-HyperV-VM machine ),
So, It doesn't make sense.
> > +
> > +/**
> > + * Probe a network interface to associate with vdev_netvsc context.
> > + *
> > + * This function determines if the network device matches the
> > +properties of
> > + * the NetVSC interface associated with the vdev_netvsc context and
> > + * communicates its bus address to the fail-safe PMD instance if so.
> > + *
> > + * It is normally used with vdev_netvsc_foreach_iface().
> > + *
> > + * @param[in] iface
> > + * Pointer to netdevice description structure (name and index).
> > + * @param[in] eth_addr
> > + * MAC address associated with @p iface.
> > + * @param ap
> > + * Variable arguments list comprising:
> > + *
> > + * - struct vdev_netvsc_ctx *ctx:
> > + * Context to associate network interface with.
> > + *
> > + * @return
> > + * A nonzero value when interface matches, 0 otherwise or in case of
> > + * error.
> > + */
> > +static int
> > +vdev_netvsc_device_probe(const struct if_nameindex *iface,
> > + const struct ether_addr *eth_addr,
> > + va_list ap)
> > +{
> > + struct vdev_netvsc_ctx *ctx = va_arg(ap, struct vdev_netvsc_ctx *);
> > + char buf[RTE_MAX(sizeof(ctx->yield), 256u)];
> > + const char *addr;
> > + size_t len;
> > + int ret;
> > +
> > + /* Skip non-matching or unwanted NetVSC interfaces. */
> > + if (ctx->if_index == iface->if_index) {
> > + if (!strcmp(ctx->if_name, iface->if_name))
> > + return 0;
> > + DRV_LOG(DEBUG,
> > + "NetVSC interface \"%s\" (index %u) renamed
> \"%s\"",
> > + ctx->if_name, ctx->if_index, iface->if_name);
> > + strncpy(ctx->if_name, iface->if_name, sizeof(ctx-
> >if_name));
> > + return 0;
> > + }
> > + if (vdev_netvsc_iface_is_netvsc(iface))
> > + return 0;
> > + if (!is_same_ether_addr(eth_addr, &ctx->if_addr))
> > + return 0;
> > + /* Look for associated PCI device. */
> > + ret = vdev_netvsc_sysfs_readlink(buf, sizeof(buf), iface->if_name,
> > + "device/subsystem");
> > + if (ret)
> > + return 0;
> > + addr = strrchr(buf, '/');
> > + addr = addr ? addr + 1 : buf;
> > + if (strcmp(addr, "pci"))
> > + return 0;
> > + ret = vdev_netvsc_sysfs_readlink(buf, sizeof(buf), iface->if_name,
> > + "device");
> > + if (ret)
> > + return 0;
> > + addr = strrchr(buf, '/');
> > + addr = addr ? addr + 1 : buf;
> > + len = strlen(addr);
> > + if (!len)
> > + return 0;
> > + /* Send PCI device argument to fail-safe PMD instance. */
> > + if (strcmp(addr, ctx->yield))
> > + DRV_LOG(DEBUG, "associating PCI device \"%s\" with
> NetVSC"
> > + " interface \"%s\" (index %u)", addr, ctx->if_name,
> > + ctx->if_index);
> > + memmove(buf, addr, len + 1);
> > + addr = buf;
> > + buf[len] = '\n';
> > + ret = write(ctx->pipe[1], addr, len + 1);
> > + buf[len] = '\0';
> > + if (ret == -1) {
> > + if (errno == EINTR || errno == EAGAIN)
> > + return 1;
> > + DRV_LOG(WARNING, "cannot associate PCI device name
> \"%s\" with"
> > + " interface \"%s\": %s", addr, ctx->if_name,
> > + rte_strerror(errno));
> > + return 1;
> > + }
> > + if ((size_t)ret != len + 1) {
> > + /*
> > + * Attempt to override previous partial write, no need to
> > + * recover if that fails.
> > + */
> > + ret = write(ctx->pipe[1], "\n", 1);
> > + (void)ret;
> > + return 1;
> > + }
> > + fsync(ctx->pipe[1]);
> > + memcpy(ctx->yield, addr, len + 1);
> > + return 1;
> > +}
> > +
> > +/**
> > + * Alarm callback that regularly probes system network interfaces.
> > + *
> > + * This callback runs at a frequency determined by
> > +VDEV_NETVSC_PROBE_MS as
> > + * long as an vdev_netvsc context instance exists.
> > + *
> > + * @param arg
> > + * Ignored.
> > + */
> > +static void
> > +vdev_netvsc_alarm(__rte_unused void *arg) {
> > + struct vdev_netvsc_ctx *ctx;
> > + int ret;
> > +
> > + LIST_FOREACH(ctx, &vdev_netvsc_ctx_list, entry) {
> > + ret =
> vdev_netvsc_foreach_iface(vdev_netvsc_device_probe, ctx);
> > + if (ret)
> > + break;
> > + }
> > + if (!vdev_netvsc_ctx_count)
> > + return;
> > + ret = rte_eal_alarm_set(VDEV_NETVSC_PROBE_MS * 1000,
> > + vdev_netvsc_alarm, NULL);
> > + if (ret < 0) {
> > + DRV_LOG(ERR, "unable to reschedule alarm callback: %s",
> > + rte_strerror(-ret));
> > + }
> > +}
>
> Why not use netlink uevent?
As described in doc, we can improve the hotplug mechanism(here and in fail-safe) after EAL hotplug work will be done.
So, maybe in next release we will change it to use uevent by EAL hotplug.
>
> > +/**
> > + * Probe a NetVSC interface to generate a vdev_netvsc context from.
> > + *
> > + * This function instantiates vdev_netvsc contexts either for all
> > +NetVSC
> > + * devices found on the system or only a subset provided as device
> > + * arguments.
> > + *
> > + * It is normally used with vdev_netvsc_foreach_iface().
> > + *
> > + * @param[in] iface
> > + * Pointer to netdevice description structure (name and index).
> > + * @param[in] eth_addr
> > + * MAC address associated with @p iface.
> > + * @param ap
> > + * Variable arguments list comprising:
> > + *
> > + * - const char *name:
> > + * Name associated with current driver instance.
> > + *
> > + * - struct rte_kvargs *kvargs:
> > + * Device arguments provided to current driver instance.
> > + *
> > + * - unsigned int specified:
> > + * Number of specific netdevices provided as device arguments.
> > + *
> > + * - unsigned int *matched:
> > + * The number of specified netdevices matched by this function.
> > + *
> > + * @return
> > + * A nonzero value when interface matches, 0 otherwise or in case of
> > + * error.
> > + */
> > +static int
> > +vdev_netvsc_netvsc_probe(const struct if_nameindex *iface,
> > + const struct ether_addr *eth_addr,
> > + va_list ap)
> > +{
> > + const char *name = va_arg(ap, const char *);
> > + struct rte_kvargs *kvargs = va_arg(ap, struct rte_kvargs *);
> > + unsigned int specified = va_arg(ap, unsigned int);
> > + unsigned int *matched = va_arg(ap, unsigned int *);
> > + unsigned int i;
> > + struct vdev_netvsc_ctx *ctx;
> > + int ret;
> > +
> > + /* Probe all interfaces when none are specified. */
> > + if (specified) {
> > + for (i = 0; i != kvargs->count; ++i) {
> > + const struct rte_kvargs_pair *pair = &kvargs->pairs[i];
> > +
> > + if (!strcmp(pair->key, VDEV_NETVSC_ARG_IFACE)) {
> > + if (!strcmp(pair->value, iface->if_name))
> > + break;
> > + } else if (!strcmp(pair->key,
> VDEV_NETVSC_ARG_MAC)) {
> > + struct ether_addr tmp;
> > +
> > + if (sscanf(pair->value,
> > + "%" SCNx8 ":%" SCNx8 ":%" SCNx8
> ":"
> > + "%" SCNx8 ":%" SCNx8 ":%" SCNx8,
> > + &tmp.addr_bytes[0],
> > + &tmp.addr_bytes[1],
> > + &tmp.addr_bytes[2],
> > + &tmp.addr_bytes[3],
> > + &tmp.addr_bytes[4],
> > + &tmp.addr_bytes[5]) != 6) {
> > + DRV_LOG(ERR,
> > + "invalid MAC address format"
> > + " \"%s\"",
> > + pair->value);
> > + return -EINVAL;
> > + }
> > + if (is_same_ether_addr(eth_addr, &tmp))
> > + break;
> > + }
> > + }
> > + if (i == kvargs->count)
> > + return 0;
> > + ++(*matched);
> > + }
> > + /* Weed out interfaces already handled. */
> > + LIST_FOREACH(ctx, &vdev_netvsc_ctx_list, entry)
> > + if (ctx->if_index == iface->if_index)
> > + break;
> > + if (ctx) {
> > + if (!specified)
> > + return 0;
> > + DRV_LOG(WARNING,
> > + "interface \"%s\" (index %u) is already handled,"
> > + " skipping",
> > + iface->if_name, iface->if_index);
> > + return 0;
> > + }
> > + if (!vdev_netvsc_iface_is_netvsc(iface)) {
> > + if (!specified)
> > + return 0;
> > + DRV_LOG(WARNING,
> > + "interface \"%s\" (index %u) is not NetVSC,"
> > + " skipping",
> > + iface->if_name, iface->if_index);
> > + return 0;
> > + }
> > + /* Create interface context. */
> > + ctx = calloc(1, sizeof(*ctx));
> > + if (!ctx) {
> > + ret = -errno;
> > + DRV_LOG(ERR, "cannot allocate context for interface \"%s\":
> %s",
> > + iface->if_name, rte_strerror(errno));
> > + goto error;
> > + }
> > + ctx->id = vdev_netvsc_ctx_count;
> > + strncpy(ctx->if_name, iface->if_name, sizeof(ctx->if_name));
> > + ctx->if_index = iface->if_index;
> > + ctx->if_addr = *eth_addr;
> > + ctx->pipe[0] = -1;
> > + ctx->pipe[1] = -1;
> > + ctx->yield[0] = '\0';
> > + if (pipe(ctx->pipe) == -1) {
> > + ret = -errno;
> > + DRV_LOG(ERR,
> > + "cannot allocate control pipe for interface \"%s\":
> %s",
> > + ctx->if_name, rte_strerror(errno));
> > + goto error;
> > + }
> > + for (i = 0; i != RTE_DIM(ctx->pipe); ++i) {
> > + int flf = fcntl(ctx->pipe[i], F_GETFL);
> > +
> > + if (flf != -1 &&
> > + fcntl(ctx->pipe[i], F_SETFL, flf | O_NONBLOCK) != -1)
> > + continue;
> > + ret = -errno;
> > + DRV_LOG(ERR, "cannot toggle non-blocking flag on control
> file"
> > + " descriptor #%u (%d): %s", i, ctx->pipe[i],
> > + rte_strerror(errno));
> > + goto error;
> > + }
> > + /* Generate virtual device name and arguments. */
> > + i = 0;
> > + ret = snprintf(ctx->name, sizeof(ctx->name), "%s_id%u",
> > + name, ctx->id);
> > + if (ret == -1 || (size_t)ret >= sizeof(ctx->name))
> > + ++i;
> > + ret = snprintf(ctx->devname, sizeof(ctx->devname),
> "net_failsafe_%s",
> > + ctx->name);
> > + if (ret == -1 || (size_t)ret >= sizeof(ctx->devname))
> > + ++i;
> > + ret = snprintf(ctx->devargs, sizeof(ctx->devargs),
> > + "fd(%d),dev(net_tap_%s,remote=%s)",
> > + ctx->pipe[0], ctx->name, ctx->if_name);
> > + if (ret == -1 || (size_t)ret >= sizeof(ctx->devargs))
> > + ++i;
> > + if (i) {
> > + ret = -ENOBUFS;
> > + DRV_LOG(ERR, "generated virtual device name or argument
> list"
> > + " too long for interface \"%s\"", ctx->if_name);
> > + goto error;
> > + }
> > + /* Request virtual device generation. */
> > + DRV_LOG(DEBUG, "generating virtual device \"%s\" with arguments
> \"%s\"",
> > + ctx->devname, ctx->devargs);
> > + vdev_netvsc_foreach_iface(vdev_netvsc_device_probe, ctx);
> > + ret = rte_eal_hotplug_add("vdev", ctx->devname, ctx->devargs);
> > + if (ret)
> > + goto error;
> > + LIST_INSERT_HEAD(&vdev_netvsc_ctx_list, ctx, entry);
> > + ++vdev_netvsc_ctx_count;
> > + DRV_LOG(DEBUG, "added NetVSC interface \"%s\" to context list",
> > + ctx->if_name);
> > + return 0;
> > +error:
> > + if (ctx)
> > + vdev_netvsc_ctx_destroy(ctx);
> > + return ret;
> > +}
> > +
> > +/**
> > * Probe NetVSC interfaces.
> > *
> > + * This function probes system netdevices according to the specified
> > + device
> > + * arguments and starts a periodic alarm callback to notify the
> > + resulting
> > + * fail-safe PMD instances of their sub-devices whereabouts.
> > + *
> > * @param dev
> > * Virtual device context for driver instance.
> > *
> > @@ -49,12 +551,40 @@
> > const char *args = rte_vdev_device_args(dev);
> > struct rte_kvargs *kvargs = rte_kvargs_parse(args ? args : "",
> > vdev_netvsc_arg);
> > + unsigned int specified = 0;
> > + unsigned int matched = 0;
> > + unsigned int i;
> > + int ret;
> >
> > DRV_LOG(DEBUG, "invoked as \"%s\", using arguments \"%s\"",
> name, args);
> > if (!kvargs) {
> > DRV_LOG(ERR, "cannot parse arguments list");
> > goto error;
> > }
> > + for (i = 0; i != kvargs->count; ++i) {
> > + const struct rte_kvargs_pair *pair = &kvargs->pairs[i];
> > +
> > + if (!strcmp(pair->key, VDEV_NETVSC_ARG_IFACE) ||
> > + !strcmp(pair->key, VDEV_NETVSC_ARG_MAC))
> > + ++specified;
> > + }
> > + rte_eal_alarm_cancel(vdev_netvsc_alarm, NULL);
> > + /* Gather interfaces. */
> > + ret = vdev_netvsc_foreach_iface(vdev_netvsc_netvsc_probe,
> name, kvargs,
> > + specified, &matched);
> > + if (ret < 0)
> > + goto error;
> > + if (matched < specified)
> > + DRV_LOG(WARNING,
> > + "some of the specified parameters did not match"
> > + " recognized network interfaces");
> > + ret = rte_eal_alarm_set(VDEV_NETVSC_PROBE_MS * 1000,
> > + vdev_netvsc_alarm, NULL);
> > + if (ret < 0) {
> > + DRV_LOG(ERR, "unable to schedule alarm callback: %s",
> > + rte_strerror(-ret));
> > + goto error;
> > + }
> > error:
> > if (kvargs)
> > rte_kvargs_free(kvargs);
> > @@ -65,6 +595,9 @@
> > /**
> > * Remove driver instance.
> > *
> > + * The alarm callback and underlying vdev_netvsc context instances
> > + are only
> > + * destroyed after the last PMD instance is removed.
> > + *
> > * @param dev
> > * Virtual device context for driver instance.
> > *
> > @@ -74,7 +607,16 @@
> > static int
> > vdev_netvsc_vdev_remove(__rte_unused struct rte_vdev_device *dev)
> {
> > - --vdev_netvsc_ctx_inst;
> > + if (--vdev_netvsc_ctx_inst)
> > + return 0;
> > + rte_eal_alarm_cancel(vdev_netvsc_alarm, NULL);
> > + while (!LIST_EMPTY(&vdev_netvsc_ctx_list)) {
> > + struct vdev_netvsc_ctx *ctx =
> LIST_FIRST(&vdev_netvsc_ctx_list);
> > +
> > + LIST_REMOVE(ctx, entry);
> > + --vdev_netvsc_ctx_count;
> > + vdev_netvsc_ctx_destroy(ctx);
> > + }
> > return 0;
> > }
> >
More information about the dev
mailing list