[dpdk-dev] [PATCH v2] net/mlx5: add support for 32bit systems

[Shahaf Shuler]

Hi Ferruh,

Thursday, July 5, 2018 2:27 PM, Ferruh Yigit:
> Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: add support for 32bit systems
> 
> On 7/5/2018 11:09 AM, Mordechay Haimovsky wrote:
> > Hi,
> >  Didn’t see it in our setups (not an excuse),  Investigating ....
> 
> Thanks. Perhaps it can be related to compiler version:
> gcc (GCC) 8.1.1 20180502 (Red Hat 8.1.1-1) (ICC 32bit also gave same build
> error.)
> 
> btw, to clarify rdma-core v19 build errors was not just for 32bit build, I lost my
> log but I can reproduce if you require.

Thanks for reporting it we will fix.

Here is the plan to include the patchset upstream:
1. there is a fix on rmda-core v19+ for the 32b compilation issue seen
2. as you reported there is another compilation issue w/ v19 which needs to be solved (I will provide a fix patch).
3. #2 fix patch should be on top of series : https://patches.dpdk.org/project/dpdk/list/?series=512

So the plan is to integrate the series and after it the compilation fix patch and the 32b support one.
Do you agree? 

I hope the above series will be merge at the beginning of next week.


> 
> >
> > Moti
> >
> >> -----Original Message-----
> >> From: Ferruh Yigit [mailto:ferruh.yigit at intel.com]
> >> Sent: Wednesday, July 4, 2018 4:49 PM
> >> To: Mordechay Haimovsky <motih at mellanox.com>; Shahaf Shuler
> >> <shahafs at mellanox.com>
> >> Cc: Adrien Mazarguil <adrien.mazarguil at 6wind.com>; dev at dpdk.org
> >> Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: add support for 32bit
> >> systems
> >>
> >> On 7/2/2018 12:11 PM, Moti Haimovsky wrote:
> >>> This patch adds support for building and running mlx5 PMD on 32bit
> >>> systems such as i686.
> >>>
> >>> The main issue to tackle was handling the 32bit access to the UAR as
> >>> quoted from the mlx5 PRM:
> >>> QP and CQ DoorBells require 64-bit writes. For best performance, it
> >>> is recommended to execute the QP/CQ DoorBell as a single 64-bit
> >>> write operation. For platforms that do not support 64 bit writes, it
> >>> is possible to issue the 64 bits DoorBells through two consecutive
> >>> writes, each write 32 bits, as described below:
> >>> * The order of writing each of the Dwords is from lower to upper
> >>>   addresses.
> >>> * No other DoorBell can be rung (or even start ringing) in the midst of
> >>>   an on-going write of a DoorBell over a given UAR page.
> >>> The last rule implies that in a multi-threaded environment, the
> >>> access to a UAR page (which can be accessible by all threads in the
> >>> process) must be synchronized (for example, using a semaphore)
> >>> unless an atomic write of 64 bits in a single bus operation is
> >>> guaranteed. Such a synchronization is not required for when ringing
> >>> DoorBells on different UAR pages.
> >>>
> >>> Signed-off-by: Moti Haimovsky <motih at mellanox.com>
> >>> ---
> >>> v2:
> >>> * Fixed coding style issues.
> >>> * Modified documentation according to review inputs.
> >>> * Fixed merge conflicts.
> >>> ---
> >>>  doc/guides/nics/features/mlx5.ini |  1 +
> >>>  doc/guides/nics/mlx5.rst          |  6 +++-
> >>>  drivers/net/mlx5/mlx5.c           |  8 ++++-
> >>>  drivers/net/mlx5/mlx5.h           |  5 +++
> >>>  drivers/net/mlx5/mlx5_defs.h      | 18 ++++++++--
> >>>  drivers/net/mlx5/mlx5_rxq.c       |  6 +++-
> >>>  drivers/net/mlx5/mlx5_rxtx.c      | 22 +++++++------
> >>>  drivers/net/mlx5/mlx5_rxtx.h      | 69
> >> ++++++++++++++++++++++++++++++++++++++-
> >>>  drivers/net/mlx5/mlx5_txq.c       | 13 +++++++-
> >>>  9 files changed, 131 insertions(+), 17 deletions(-)
> >>>
> >>> diff --git a/doc/guides/nics/features/mlx5.ini
> >>> b/doc/guides/nics/features/mlx5.ini
> >>> index e75b14b..b28b43e 100644
> >>> --- a/doc/guides/nics/features/mlx5.ini
> >>> +++ b/doc/guides/nics/features/mlx5.ini
> >>> @@ -43,5 +43,6 @@ Multiprocess aware   = Y
> >>>  Other kdrv           = Y
> >>>  ARMv8                = Y
> >>>  Power8               = Y
> >>> +x86-32               = Y
> >>>  x86-64               = Y
> >>>  Usage doc            = Y
> >>> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> >>> index
> >>> 7dd9c1c..5fbad60 100644
> >>> --- a/doc/guides/nics/mlx5.rst
> >>> +++ b/doc/guides/nics/mlx5.rst
> >>> @@ -49,7 +49,7 @@ libibverbs.
> >>>  Features
> >>>  --------
> >>>
> >>> -- Multi arch support: x86_64, POWER8, ARMv8.
> >>> +- Multi arch support: x86_64, POWER8, ARMv8, i686.
> >>>  - Multiple TX and RX queues.
> >>>  - Support for scattered TX and RX frames.
> >>>  - IPv4, IPv6, TCPv4, TCPv6, UDPv4 and UDPv6 RSS on any number of
> >> queues.
> >>> @@ -477,6 +477,10 @@ RMDA Core with Linux Kernel
> >>>  - Minimal kernel version : v4.14 or the most recent 4.14-rc (see
> >>> `Linux installation documentation`_)
> >>>  - Minimal rdma-core version: v15+ commit 0c5f5765213a ("Merge pull
> >> request #227 from yishaih/tm")
> >>>    (see `RDMA Core installation documentation`_)
> >>> +- When building for i686 use:
> >>> +
> >>> +  - rdma-core version 18.0 or above built with 32bit support.
> >>
> >> related "or above" part, v19 giving build errors with mlx5, FYI.
> >>
> >> And with v18 getting build errors originated from rdma headers [1],
> >> am I doing something wrong?
> >>
> >> [1]
> >> In file included from .../dpdk/drivers/net/mlx5/mlx5_glue.c:20:
> >> .../rdma-core/build32/include/infiniband/mlx5dv.h: In function
> >> ‘mlx5dv_x86_set_data_seg’:
> >> .../rdma-core/build32/include/infiniband/mlx5dv.h:787:69: error:
> >> right shift count >= width of type [-Werror=shift-count-overflow]
> >>   __m128i val  = _mm_set_epi32((uint32_t)address, (uint32_t)(address
> >> >> 32), lkey, length);
> >>                                                                      ^~