[dpdk-dev] [PATCH] baseband/turbo_sw: update Turbo driver for FlexRAN 1.6.0

Amr Mokhtar amr.mokhtar at intel.com
Thu Jul 19 15:03:53 CEST 2018


Update BBDEV Turbo SW driver download/build instructions for
FlexRAN 1.6.0 release

Signed-off-by: Amr Mokhtar <amr.mokhtar at intel.com>
---
 doc/guides/bbdevs/turbo_sw.rst                   | 38 +++++++++++-------------
 drivers/baseband/turbo_sw/bbdev_turbo_software.c |  8 ++---
 2 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/doc/guides/bbdevs/turbo_sw.rst b/doc/guides/bbdevs/turbo_sw.rst
index 9661a30..0b96fbb 100644
--- a/doc/guides/bbdevs/turbo_sw.rst
+++ b/doc/guides/bbdevs/turbo_sw.rst
@@ -47,8 +47,8 @@ Design Center <https://www.intel.com/content/www/us/en/design/resource-design-ce
 needs to be registered.
 
 Once registered, the user needs to log in, and look for
-*Intel FlexRAN Software Release Package 1_4_0* to download or directly through
-this `link <https://cdrdv2.intel.com/v1/dl/getContent/576288>`_.
+*Intel FlexRAN Software Release Package -1-6-0* to download or directly through
+this `link <https://cdrdv2.intel.com/v1/dl/getContent/600609>`_.
 
 After download is complete, the user needs to unpack and compile on their
 system before building DPDK.
@@ -64,6 +64,7 @@ The following table maps DPDK versions with past FlexRAN SDK releases:
    =====================  ============================
    18.02                  1.3.0
    18.05                  1.4.0
+   18.08                  1.6.0
    =====================  ============================
 
 FlexRAN SDK Installation
@@ -71,8 +72,8 @@ FlexRAN SDK Installation
 
 The following are pre-requisites for building FlexRAN SDK Libraries:
  (a) An AVX2 supporting machine
- (b) Windriver TS 2 or CentOS 7 operating systems
- (c) Intel ICC 17.0.3 compiler installed
+ (b) CentOS Linux release 7.2.1511 (Core) operating system
+ (c) Intel ICC 18.0.1 20171018 compiler installed
 
 The following instructions should be followed in this exact order:
 
@@ -82,29 +83,26 @@ The following instructions should be followed in this exact order:
 
         source <path-to-icc-compiler-install-folder>/linux/bin/compilervars.sh intel64 -platform linux
 
-
-#. Extract the ``576288-576288-intel-swa-sw-flexran-release-package-r1-4-0.zip``
-   package, then run the SDK extractor script and accept the license:
+#. Extract the ``flexran-1-6-0-tar.gz.zip`` package:
 
     .. code-block:: console
 
-        cd <path-to-workspace>/FlexRAN-1.4.0/
-        ./SDK-R1.4.0.sh
+        unzip flexran-1-6-0-tar.gz.zip
+        tar xvzf flexran-1-6-0-tar.gz -C FlexRAN-1.6.0/
 
-#. Generate makefiles based on system configuration:
+#. Run the SDK extractor script and accept the license:
 
     .. code-block:: console
 
-        cd <path-to-workspace>/FlexRAN-1.4.0/SDK-R1.4.0/sdk/
-        ./create-makefiles-linux.sh
+        cd <path-to-workspace>/FlexRAN-1.6.0/
+        ./SDK-R1.6.0.sh
 
-#. If build as a shared library is required, then add ``"-fPIC"`` option to file
-   ``<path-to-workspace>/FlexRAN-1.4.0/SDK-R1.4.0/sdk/cmake/intel-compile-options.cmake``
-   as follows:
+#. Generate makefiles based on system configuration:
 
     .. code-block:: console
 
-        add_compile_options("-fPIC")
+        cd <path-to-workspace>/FlexRAN-1.6.0/SDK-R1.6.0/sdk/
+        ./create-makefiles-linux.sh
 
 #. A build folder is generated in this form ``build-<ISA>-<CC>``, enter that
    folder and install:
@@ -112,7 +110,7 @@ The following instructions should be followed in this exact order:
     .. code-block:: console
 
         cd build-avx2-icc/
-        make install
+        make && make install
 
 
 Initialization
@@ -130,8 +128,8 @@ Example:
 
 .. code-block:: console
 
-    export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-1.4.0/SDK-R1.4.0/sdk/build-avx2-icc/install
-    export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-1.4.0/SDK-R1.4.0/sdk/
+    export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-1.6.0/SDK-R1.6.0/sdk/build-avx2-icc/install
+    export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-1.6.0/SDK-R1.6.0/sdk/
 
 
 * Set ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` in DPDK common configuration
@@ -156,4 +154,4 @@ Example:
 .. code-block:: console
 
     ./test-bbdev.py -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" \
-    -c validation -v ./test_vectors/bbdev_vector_t?_default.data
+    -c validation -v ./turbo_*_default.data
diff --git a/drivers/baseband/turbo_sw/bbdev_turbo_software.c b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
index 1a2430e..8ceb276 100644
--- a/drivers/baseband/turbo_sw/bbdev_turbo_software.c
+++ b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
@@ -490,8 +490,8 @@ process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
 			return;
 		}
 		crc_req.data = in;
-		crc_req.len = (k - 24) >> 3;
-		/* Check if there is a room for CRC bits. If not use
+		crc_req.len = k - 24;
+		/* Check if there is a room for CRC bits if not use
 		 * the temporary buffer.
 		 */
 		if (rte_pktmbuf_append(m_in, 3) == NULL) {
@@ -522,8 +522,8 @@ process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
 			return;
 		}
 		crc_req.data = in;
-		crc_req.len = (k - 24) >> 3;
-		/* Check if there is a room for CRC bits. If this is the last
+		crc_req.len = k - 24;
+		/* Check if there is a room for CRC bits if this is the last
 		 * CB in TB. If not use temporary buffer.
 		 */
 		if ((c - r == 1) && (rte_pktmbuf_append(m_in, 3) == NULL)) {
-- 
2.7.4



More information about the dev mailing list