[dpdk-dev] [PATCH v2 5/7] net/mlx5: add port representor awareness
Xueming(Steven) Li
xuemingl at mellanox.com
Sat Jun 16 10:37:14 CEST 2018
Reviewed-by: Xueming Li <xuemingl at mellanox.com>
One minor issue we should be able to ignore.
> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Adrien Mazarguil
> Sent: Thursday, June 14, 2018 4:35 PM
> To: Shahaf Shuler <shahafs at mellanox.com>
> Cc: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH v2 5/7] net/mlx5: add port representor awareness
>
> The current PCI probing method is not aware of Verbs port representors, which appear as standard Verbs
> devices bound to the same PCI address and cannot be distinguished.
>
> Problem is that more often than not, the wrong Verbs device is used, resulting in unexpected traffic.
>
> This patch adds necessary heuristics to bind affected driver instances to the intended (i.e. non-
> representor) device.
>
> (Patch based on prior work from Yuanhan Liu)
>
> Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> --
> v2 changes:
>
> - Fixed digit detection in mlx5_cmp_ibv_name() so that "foo1" and "foo10"
> are compared on the integer conversion of "1" against "10" instead of ""
> and "0".
> ---
> drivers/net/mlx5/mlx5.c | 66 ++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 61 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index c9815d721..498f80c89 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -3,6 +3,7 @@
> * Copyright 2015 Mellanox Technologies, Ltd
> */
>
> +#include <ctype.h>
> #include <stddef.h>
> #include <unistd.h>
> #include <string.h>
> @@ -1170,6 +1171,34 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, }
>
> /**
> + * Comparison callback to sort Verbs device names.
> + *
> + * This is meant to be used with qsort().
> + *
> + * @param a[in]
> + * Pointer to pointer to first Verbs device.
> + * @param b[in]
> + * Pointer to pointer to second Verbs device.
> + *
> + * @return
> + * 0 if both names are equal, less than 0 if the first argument is less
> + * than the second, greater than 0 otherwise.
> + */
> +static int
> +mlx5_cmp_ibv_name(const void *a, const void *b) {
> + const char *name_a = (*(const struct ibv_device *const *)a)->name;
> + const char *name_b = (*(const struct ibv_device *const *)b)->name;
> + size_t i = 0;
> +
> + while (name_a[i] && name_a[i] == name_b[i])
> + ++i;
> + while (i && isdigit(name_a[i - 1]) && isdigit(name_b[i - 1]))
name_a[i - 1] and name_b[i - 1] must be same here.
> + --i;
> + return atoi(name_a + i) - atoi(name_b + i); }
> +
> +/**
> * DPDK callback to register a PCI device.
> *
> * This function creates an Ethernet device for each port of a given @@ -1189,6 +1218,7 @@
> mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, {
> struct ibv_device **ibv_list;
> struct rte_eth_dev **eth_list = NULL;
> + int n = 0;
> int vf;
> int ret;
>
> @@ -1210,6 +1240,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
> return -rte_errno;
> }
> +
> + struct ibv_device *ibv_match[ret + 1];
> +
> while (ret-- > 0) {
> struct rte_pci_addr pci_addr;
>
> @@ -1221,14 +1254,37 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> pci_dev->addr.devid != pci_addr.devid ||
> pci_dev->addr.function != pci_addr.function)
> continue;
> - DRV_LOG(INFO, "PCI information matches, using device \"%s\"",
> + DRV_LOG(INFO, "PCI information matches for device \"%s\"",
> ibv_list[ret]->name);
> - break;
> + ibv_match[n++] = ibv_list[ret];
> + }
> + ibv_match[n] = NULL;
> + if (n > 1) {
> + /*
> + * The existence of several matching entries means port
> + * representors have been instantiated. No existing Verbs
> + * call nor /sys entries can tell them apart at this point.
> + *
> + * While definitely hackish, assume their names are numbered
> + * based on order of creation with master device first,
> + * followed by first port representor, followed by the
> + * second one and so on.
> + */
> + DRV_LOG(WARNING,
> + "probing device with port representors involves"
> + " heuristics with uncertain outcome");
> + qsort(ibv_match, n, sizeof(*ibv_match), mlx5_cmp_ibv_name);
> + DRV_LOG(WARNING, "assuming \"%s\" is the master device",
> + ibv_match[0]->name);
> + for (ret = 1; ret < n; ++ret)
> + DRV_LOG(WARNING,
> + "assuming \"%s\" is port representor #%d",
> + ibv_match[ret]->name, ret - 1);
> }
> - if (ret >= 0)
> - eth_list = mlx5_dev_spawn(&pci_dev->device, ibv_list[ret], vf);
> + if (n)
> + eth_list = mlx5_dev_spawn(&pci_dev->device, ibv_match[0], vf);
> mlx5_glue->free_device_list(ibv_list);
> - if (!ret) {
> + if (!n) {
> DRV_LOG(WARNING,
> "no Verbs device matches PCI device " PCI_PRI_FMT ","
> " are kernel drivers loaded?",
> --
> 2.11.0
More information about the dev
mailing list