[dpdk-dev] [PATCH] net/octeontx: use the new offload APIs

Ferruh Yigit ferruh.yigit at intel.com
Wed Mar 21 20:25:57 CET 2018


On 3/8/2018 7:07 PM, Pavan Nikhilesh wrote:
> Use the new Rx/Tx offload APIs and remove the old style offloads.
> 
> Signed-off-by: Pavan Nikhilesh <pbhagavatula at caviumnetworks.com>
> ---
> 
>  Checkpatch reports falsepositive for PRIx64
> 
>  drivers/net/octeontx/octeontx_ethdev.c | 82 ++++++++++++++++++++++++++--------
>  drivers/net/octeontx/octeontx_ethdev.h |  3 ++
>  2 files changed, 67 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
> index b739c0b39..0448e3557 100644
> --- a/drivers/net/octeontx/octeontx_ethdev.c
> +++ b/drivers/net/octeontx/octeontx_ethdev.c
> @@ -262,6 +262,8 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
>  	struct rte_eth_rxmode *rxmode = &conf->rxmode;
>  	struct rte_eth_txmode *txmode = &conf->txmode;
>  	struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> +	uint64_t configured_offloads;
> +	uint64_t unsupported_offloads;
>  	int ret;
> 
>  	PMD_INIT_FUNC_TRACE();
> @@ -283,34 +285,43 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
>  		return -EINVAL;
>  	}
> 
> -	if (!rxmode->hw_strip_crc) {
> +	configured_offloads = rxmode->offloads;
> +
> +	if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
>  		PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
> -		rxmode->hw_strip_crc = 1;
> +		configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
>  	}

Just as a heads up this will be changed in this release [1], CRC_STRIP will be
the default behavior without requiring a flag.

[1]
https://dpdk.org/ml/archives/dev/2018-March/093255.html

> 
> -	if (rxmode->hw_ip_checksum) {
> +	if (configured_offloads & DEV_RX_OFFLOAD_CHECKSUM) {
>  		PMD_INIT_LOG(NOTICE, "rxcksum not supported");
> -		rxmode->hw_ip_checksum = 0;
> +		configured_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
>  	}

No need to specific check for DEV_RX_OFFLOAD_CHECKSUM, if it is not announced as
supported below unsupported_offloads will cover it.

> 
> -	if (rxmode->split_hdr_size) {
> -		octeontx_log_err("rxmode does not support split header");
> -		return -EINVAL;
> -	}
> +	unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
> 
> -	if (rxmode->hw_vlan_filter) {
> -		octeontx_log_err("VLAN filter not supported");
> -		return -EINVAL;
> +	if (unsupported_offloads) {
> +		PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
> +		      "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
> +		      unsupported_offloads, configured_offloads,
> +		      (uint64_t)OCTEONTX_RX_OFFLOADS);
> +		return -ENOTSUP;
>  	}
> 
> -	if (rxmode->hw_vlan_extend) {
> -		octeontx_log_err("VLAN extended not supported");
> -		return -EINVAL;
> +	configured_offloads = txmode->offloads;
> +
> +	if (!(configured_offloads & DEV_TX_OFFLOAD_MT_LOCKFREE)) {
> +		PMD_INIT_LOG(NOTICE, "cant disable lockfree tx");
> +		configured_offloads |= DEV_TX_OFFLOAD_MT_LOCKFREE;
>  	}
> 
> -	if (rxmode->enable_lro) {
> -		octeontx_log_err("LRO not supported");
> -		return -EINVAL;
> +	unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
> +
> +	if (unsupported_offloads) {
> +		PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
> +		      "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
> +		      unsupported_offloads, configured_offloads,
> +		      (uint64_t)OCTEONTX_TX_OFFLOADS);
> +		return -ENOTSUP;
>  	}
> 
>  	if (conf->link_speeds & ETH_LINK_SPEED_FIXED) {
> @@ -750,10 +761,11 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
>  	struct octeontx_txq *txq = NULL;
>  	uint16_t dq_num;
>  	int res = 0;
> +	uint64_t configured_offloads;
> +	uint64_t unsupported_offloads;
> 
>  	RTE_SET_USED(nb_desc);
>  	RTE_SET_USED(socket_id);
> -	RTE_SET_USED(tx_conf);
> 
>  	dq_num = (nic->port_id * PKO_VF_NUM_DQ) + qidx;
> 
> @@ -771,6 +783,17 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
>  		dev->data->tx_queues[qidx] = NULL;
>  	}
> 
> +	configured_offloads = tx_conf->offloads;
> +
> +	unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
> +	if (unsupported_offloads) {
> +		PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
> +		      "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
> +		      unsupported_offloads, configured_offloads,
> +		      (uint64_t)OCTEONTX_TX_OFFLOADS);
> +		return -ENOTSUP;
> +	}

There is a discussion about the requirement to have port offload in queue setup
or not, more details in [2], any comment is welcome.

[2]
https://dpdk.org/ml/archives/dev/2018-March/092978.html
history: https://dpdk.org/ml/archives/dev/2018-March/092862.html

> +
>  	/* Allocating tx queue data structure */
>  	txq = rte_zmalloc_socket("ethdev TX queue", sizeof(struct octeontx_txq),
>  				 RTE_CACHE_LINE_SIZE, nic->node);
> @@ -826,6 +849,8 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
>  	uint8_t gaura;
>  	unsigned int ev_queues = (nic->ev_queues * nic->port_id) + qidx;
>  	unsigned int ev_ports = (nic->ev_ports * nic->port_id) + qidx;
> +	uint64_t configured_offloads;
> +	uint64_t unsupported_offloads;
> 
>  	RTE_SET_USED(nb_desc);
> 
> @@ -848,6 +873,27 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> 
>  	port = nic->port_id;
> 
> +	configured_offloads = rx_conf->offloads;
> +
> +	if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
> +		PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
> +		configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
> +	}

Same as above.

> +
> +	if (configured_offloads & DEV_RX_OFFLOAD_CHECKSUM) {
> +		PMD_INIT_LOG(NOTICE, "rxcksum not supported");
> +		configured_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
> +	}

Not sure about changing the application configuration, and since this offload is
not reported as supported application should not set it, if it does this should
return an error.

> +
> +	unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
> +
> +	if (unsupported_offloads) {
> +		PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
> +		      "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
> +		      unsupported_offloads, configured_offloads,
> +		      (uint64_t)OCTEONTX_RX_OFFLOADS);
> +		return -ENOTSUP;
> +	}
>  	/* Rx deferred start is not supported */
>  	if (rx_conf->rx_deferred_start) {
>  		octeontx_log_err("rx deferred start not supported");
> diff --git a/drivers/net/octeontx/octeontx_ethdev.h b/drivers/net/octeontx/octeontx_ethdev.h
> index 10e42e142..9d6c22b0d 100644
> --- a/drivers/net/octeontx/octeontx_ethdev.h
> +++ b/drivers/net/octeontx/octeontx_ethdev.h
> @@ -28,6 +28,9 @@
>  #define OCTEONTX_MAX_BGX_PORTS			4
>  #define OCTEONTX_MAX_LMAC_PER_BGX		4
> 
> +#define OCTEONTX_RX_OFFLOADS			DEV_RX_OFFLOAD_CRC_STRIP
> +#define OCTEONTX_TX_OFFLOADS			DEV_TX_OFFLOAD_MT_LOCKFREE

These should be announced in dev_info as [rt]x_offload_capa, rx one seems missing.

> +
>  static inline struct octeontx_nic *
>  octeontx_pmd_priv(struct rte_eth_dev *dev)
>  {
> --
> 2.16.2
> 



More information about the dev mailing list