[dpdk-dev] [PATCH] net/octeontx: use the new offload APIs
Pavan Nikhilesh
pbhagavatula at caviumnetworks.com
Mon Mar 26 09:30:54 CEST 2018
Hi Ferruh,
On Wed, Mar 21, 2018 at 07:25:57PM +0000, Ferruh Yigit wrote:
> On 3/8/2018 7:07 PM, Pavan Nikhilesh wrote:
> > Use the new Rx/Tx offload APIs and remove the old style offloads.
> >
> > Signed-off-by: Pavan Nikhilesh <pbhagavatula at caviumnetworks.com>
> > ---
> >
> > Checkpatch reports falsepositive for PRIx64
> >
> > drivers/net/octeontx/octeontx_ethdev.c | 82 ++++++++++++++++++++++++++--------
> > drivers/net/octeontx/octeontx_ethdev.h | 3 ++
> > 2 files changed, 67 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
> > index b739c0b39..0448e3557 100644
> > --- a/drivers/net/octeontx/octeontx_ethdev.c
> > +++ b/drivers/net/octeontx/octeontx_ethdev.c
> > @@ -262,6 +262,8 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
> > struct rte_eth_rxmode *rxmode = &conf->rxmode;
> > struct rte_eth_txmode *txmode = &conf->txmode;
> > struct octeontx_nic *nic = octeontx_pmd_priv(dev);
> > + uint64_t configured_offloads;
> > + uint64_t unsupported_offloads;
> > int ret;
> >
> > PMD_INIT_FUNC_TRACE();
> > @@ -283,34 +285,43 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
> > return -EINVAL;
> > }
> >
> > - if (!rxmode->hw_strip_crc) {
> > + configured_offloads = rxmode->offloads;
> > +
> > + if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
> > PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
> > - rxmode->hw_strip_crc = 1;
> > + configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
> > }
>
> Just as a heads up this will be changed in this release [1], CRC_STRIP will be
> the default behavior without requiring a flag.
Thanks for the heads up, will remove the flag.
>
> [1]
> https://dpdk.org/ml/archives/dev/2018-March/093255.html
>
> >
> > - if (rxmode->hw_ip_checksum) {
> > + if (configured_offloads & DEV_RX_OFFLOAD_CHECKSUM) {
> > PMD_INIT_LOG(NOTICE, "rxcksum not supported");
> > - rxmode->hw_ip_checksum = 0;
> > + configured_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
> > }
>
> No need to specific check for DEV_RX_OFFLOAD_CHECKSUM, if it is not announced as
> supported below unsupported_offloads will cover it.
>
> >
> > - if (rxmode->split_hdr_size) {
> > - octeontx_log_err("rxmode does not support split header");
> > - return -EINVAL;
> > - }
> > + unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
> >
> > - if (rxmode->hw_vlan_filter) {
> > - octeontx_log_err("VLAN filter not supported");
> > - return -EINVAL;
> > + if (unsupported_offloads) {
> > + PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
> > + "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
> > + unsupported_offloads, configured_offloads,
> > + (uint64_t)OCTEONTX_RX_OFFLOADS);
> > + return -ENOTSUP;
> > }
> >
> > - if (rxmode->hw_vlan_extend) {
> > - octeontx_log_err("VLAN extended not supported");
> > - return -EINVAL;
> > + configured_offloads = txmode->offloads;
> > +
> > + if (!(configured_offloads & DEV_TX_OFFLOAD_MT_LOCKFREE)) {
> > + PMD_INIT_LOG(NOTICE, "cant disable lockfree tx");
> > + configured_offloads |= DEV_TX_OFFLOAD_MT_LOCKFREE;
> > }
> >
> > - if (rxmode->enable_lro) {
> > - octeontx_log_err("LRO not supported");
> > - return -EINVAL;
> > + unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
> > +
> > + if (unsupported_offloads) {
> > + PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
> > + "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
> > + unsupported_offloads, configured_offloads,
> > + (uint64_t)OCTEONTX_TX_OFFLOADS);
> > + return -ENOTSUP;
> > }
> >
> > if (conf->link_speeds & ETH_LINK_SPEED_FIXED) {
> > @@ -750,10 +761,11 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> > struct octeontx_txq *txq = NULL;
> > uint16_t dq_num;
> > int res = 0;
> > + uint64_t configured_offloads;
> > + uint64_t unsupported_offloads;
> >
> > RTE_SET_USED(nb_desc);
> > RTE_SET_USED(socket_id);
> > - RTE_SET_USED(tx_conf);
> >
> > dq_num = (nic->port_id * PKO_VF_NUM_DQ) + qidx;
> >
> > @@ -771,6 +783,17 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> > dev->data->tx_queues[qidx] = NULL;
> > }
> >
> > + configured_offloads = tx_conf->offloads;
> > +
> > + unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
> > + if (unsupported_offloads) {
> > + PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
> > + "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
> > + unsupported_offloads, configured_offloads,
> > + (uint64_t)OCTEONTX_TX_OFFLOADS);
> > + return -ENOTSUP;
> > + }
>
> There is a discussion about the requirement to have port offload in queue setup
> or not, more details in [2], any comment is welcome.
>
> [2]
> https://dpdk.org/ml/archives/dev/2018-March/092978.html
> history: https://dpdk.org/ml/archives/dev/2018-March/092862.html
>
> > +
> > /* Allocating tx queue data structure */
> > txq = rte_zmalloc_socket("ethdev TX queue", sizeof(struct octeontx_txq),
> > RTE_CACHE_LINE_SIZE, nic->node);
> > @@ -826,6 +849,8 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> > uint8_t gaura;
> > unsigned int ev_queues = (nic->ev_queues * nic->port_id) + qidx;
> > unsigned int ev_ports = (nic->ev_ports * nic->port_id) + qidx;
> > + uint64_t configured_offloads;
> > + uint64_t unsupported_offloads;
> >
> > RTE_SET_USED(nb_desc);
> >
> > @@ -848,6 +873,27 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> >
> > port = nic->port_id;
> >
> > + configured_offloads = rx_conf->offloads;
> > +
> > + if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
> > + PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
> > + configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
> > + }
>
> Same as above.
>
> > +
> > + if (configured_offloads & DEV_RX_OFFLOAD_CHECKSUM) {
> > + PMD_INIT_LOG(NOTICE, "rxcksum not supported");
> > + configured_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
> > + }
>
> Not sure about changing the application configuration, and since this offload is
> not reported as supported application should not set it, if it does this should
> return an error.
Will fix it in v2.
>
> > +
> > + unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
> > +
> > + if (unsupported_offloads) {
> > + PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
> > + "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
> > + unsupported_offloads, configured_offloads,
> > + (uint64_t)OCTEONTX_RX_OFFLOADS);
> > + return -ENOTSUP;
> > + }
> > /* Rx deferred start is not supported */
> > if (rx_conf->rx_deferred_start) {
> > octeontx_log_err("rx deferred start not supported");
> > diff --git a/drivers/net/octeontx/octeontx_ethdev.h b/drivers/net/octeontx/octeontx_ethdev.h
> > index 10e42e142..9d6c22b0d 100644
> > --- a/drivers/net/octeontx/octeontx_ethdev.h
> > +++ b/drivers/net/octeontx/octeontx_ethdev.h
> > @@ -28,6 +28,9 @@
> > #define OCTEONTX_MAX_BGX_PORTS 4
> > #define OCTEONTX_MAX_LMAC_PER_BGX 4
> >
> > +#define OCTEONTX_RX_OFFLOADS DEV_RX_OFFLOAD_CRC_STRIP
> > +#define OCTEONTX_TX_OFFLOADS DEV_TX_OFFLOAD_MT_LOCKFREE
>
> These should be announced in dev_info as [rt]x_offload_capa, rx one seems missing.
If CRC strip is removed (implicit) then I think RX offload can be removed.
>
> > +
> > static inline struct octeontx_nic *
> > octeontx_pmd_priv(struct rte_eth_dev *dev)
> > {
> > --
> > 2.16.2
> >
>
Thanks,
Pavan.
More information about the dev
mailing list