[dpdk-dev] [PATCH v4 3/8] lib/librte_vhost: add session message handler

Tan, Jianfeng jianfeng.tan at intel.com
Thu Mar 29 17:02:39 CEST 2018


For the title prefix, "vhost" is just fine.


On 3/29/2018 8:52 PM, Fan Zhang wrote:
> This patch adds session message handler to vhost crypto.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang at intel.com>
> ---
>   lib/librte_vhost/vhost_crypto.c | 428 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 428 insertions(+)
>   create mode 100644 lib/librte_vhost/vhost_crypto.c
>
> diff --git a/lib/librte_vhost/vhost_crypto.c b/lib/librte_vhost/vhost_crypto.c
> new file mode 100644
> index 0000000..c639b20
> --- /dev/null
> +++ b/lib/librte_vhost/vhost_crypto.c
> @@ -0,0 +1,428 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2017-2018 Intel Corporation
> + */
> +
> +#include <stdbool.h>

No bool variable below?

> +
> +#include <rte_malloc.h>
> +#include <rte_jhash.h>
> +#include <rte_mbuf.h>
> +#ifdef RTE_LIBRTE_VHOST_DEBUG

No need to add the ifdef.

> +#include <rte_hexdump.h>

Actually I don't see why we need this header file.

> +#endif
> +#include "vhost.h"
> +#include "vhost_user.h"
> +#include "rte_vhost_crypto.h"
> +
> +#define NB_MEMPOOL_OBJS			(1024)
> +#define NB_CRYPTO_DESCRIPTORS		(1024)
> +#define NB_CACHE_OBJS			(128)
> +
> +#define SESSION_MAP_ENTRIES		(1024) /**< Max nb sessions per vdev */
> +#define MAX_KEY_SIZE			(32)
> +#define VHOST_CRYPTO_MAX_IV_LEN		(16)
> +#define MAX_COUNT_DOWN_TIMES		(100)
> +
> +#define INHDR_LEN		(sizeof(struct virtio_crypto_inhdr))
> +#define IV_OFFSET		(sizeof(struct rte_crypto_op) + \
> +				sizeof(struct rte_crypto_sym_op))

Some of above macros are not used in lib which we shall delete.

> +
> +#ifdef RTE_LIBRTE_VHOST_DEBUG
> +#define VC_LOG_ERR(fmt, args...)				\
> +	RTE_LOG(ERR, USER1, "[%s] %s() line %u: " fmt "\n",	\
> +		"Vhost-Crypto",	__func__, __LINE__, ## args)
> +#define VC_LOG_INFO(fmt, args...)				\
> +	RTE_LOG(INFO, USER1, "[%s] %s() line %u: " fmt "\n",	\
> +		"Vhost-Crypto",	__func__, __LINE__, ## args)
> +
> +#define VC_LOG_DBG(fmt, args...)				\
> +	RTE_LOG(DEBUG, USER1, "[%s] %s() line %u: " fmt "\n",	\
> +		"Vhost-Crypto",	__func__, __LINE__, ## args)
> +#else
> +#define VC_LOG_ERR(fmt, args...)				\
> +	RTE_LOG(ERR, USER1, "[VHOST-Crypto]: " fmt "\n", ## args)
> +#define VC_LOG_INFO(fmt, args...)				\
> +	RTE_LOG(INFO, USER1, "[VHOST-Crypto]: " fmt "\n", ## args)
> +#define VC_LOG_DBG(fmt, args...)
> +#endif
> +
> +#define VIRTIO_CRYPTO_FEATURES ((1 << VIRTIO_F_NOTIFY_ON_EMPTY) |	\
> +		(1 << VIRTIO_RING_F_INDIRECT_DESC) |			\
> +		(1 << VIRTIO_RING_F_EVENT_IDX) |			\
> +		(1 << VIRTIO_CRYPTO_SERVICE_CIPHER) |			\
> +		(1 << VIRTIO_CRYPTO_SERVICE_HASH) |			\
> +		(1 << VIRTIO_CRYPTO_SERVICE_MAC) |			\
> +		(1 << VIRTIO_CRYPTO_SERVICE_AEAD) |			\
> +		(1 << VIRTIO_NET_F_CTRL_VQ))

Just wonder if the above are required features or supported features?

And if it's only used by 5/8 patch, shall we move the definition there?  
Let this patch to focus on "session message handler".

> +
> +
> +#define GPA_TO_VVA(t, m, a)	((t)(uintptr_t)rte_vhost_gpa_to_vva(m, a))
> +
> +/* Macro to get the buffer at the end of rte_crypto_op */
> +#define REQ_OP_OFFSET		(IV_OFFSET + VHOST_CRYPTO_MAX_IV_LEN)

Another unused macro?

> +
> +/**
> + * 1-to-1 mapping between RTE_CRYPTO_*ALGO* and VIRTIO_CRYPTO_*ALGO*, for
> + * algorithms not supported by RTE_CRYPTODEV, the -VIRTIO_CRYPTO_NOTSUPP is
> + * returned.
> + */
> +static int cipher_algo_transform[] = {

s/transform/map?

> +		RTE_CRYPTO_CIPHER_NULL,
> +		RTE_CRYPTO_CIPHER_ARC4,
> +		RTE_CRYPTO_CIPHER_AES_ECB,
> +		RTE_CRYPTO_CIPHER_AES_CBC,
> +		RTE_CRYPTO_CIPHER_AES_CTR,
> +		-VIRTIO_CRYPTO_NOTSUPP, /* VIRTIO_CRYPTO_CIPHER_DES_ECB */
> +		RTE_CRYPTO_CIPHER_DES_CBC,
> +		RTE_CRYPTO_CIPHER_3DES_ECB,
> +		RTE_CRYPTO_CIPHER_3DES_CBC,
> +		RTE_CRYPTO_CIPHER_3DES_CTR,
> +		RTE_CRYPTO_CIPHER_KASUMI_F8,
> +		RTE_CRYPTO_CIPHER_SNOW3G_UEA2,
> +		RTE_CRYPTO_CIPHER_AES_F8,
> +		RTE_CRYPTO_CIPHER_AES_XTS,
> +		RTE_CRYPTO_CIPHER_ZUC_EEA3
> +};

How do we check if an input overflows the array?

> +
> +/**
> + * VIRTIO_CRYTPO_AUTH_* indexes are not sequential, the gaps are filled with
> + * -VIRTIO_CRYPTO_BADMSG errors.
> + */
> +static int auth_algo_transform[] = {
> +		RTE_CRYPTO_AUTH_NULL,
> +		RTE_CRYPTO_AUTH_MD5_HMAC,
> +		RTE_CRYPTO_AUTH_SHA1_HMAC,
> +		RTE_CRYPTO_AUTH_SHA224_HMAC,
> +		RTE_CRYPTO_AUTH_SHA256_HMAC,
> +		RTE_CRYPTO_AUTH_SHA384_HMAC,
> +		RTE_CRYPTO_AUTH_SHA512_HMAC,
> +		-VIRTIO_CRYPTO_BADMSG,

Where is this macro defined?

> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_NOTSUPP, /* VIRTIO_CRYPTO_MAC_CMAC_3DES */
> +		RTE_CRYPTO_AUTH_AES_CMAC,
> +		RTE_CRYPTO_AUTH_KASUMI_F9,
> +		RTE_CRYPTO_AUTH_SNOW3G_UIA2,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		-VIRTIO_CRYPTO_BADMSG,
> +		RTE_CRYPTO_AUTH_AES_GMAC,
> +		-VIRTIO_CRYPTO_NOTSUPP, /* VIRTIO_CRYPTO_MAC_GMAC_TWOFISH */
> +		RTE_CRYPTO_AUTH_AES_CBC_MAC,
> +		-VIRTIO_CRYPTO_NOTSUPP, /* VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 */
> +		RTE_CRYPTO_AUTH_AES_XCBC_MAC
> +};

Ditto.

> +
> +static int cipher_op_transform[] = {
> +		-VIRTIO_CRYPTO_BADMSG, /* meaningless */
> +		RTE_CRYPTO_CIPHER_OP_ENCRYPT,
> +		RTE_CRYPTO_CIPHER_OP_DECRYPT
> +};

Ditto.

> +
> +static int iv_lens[] = {
> +		-1, /* Invalid input */
> +		0, /* RTE_CRYPTO_CIPHER_NULL */
> +		8, /* RTE_CRYPTO_CIPHER_3DES_CBC */
> +		8, /* RTE_CRYPTO_CIPHER_3DES_CTR */
> +		8, /* RTE_CRYPTO_CIPHER_3DES_ECB */
> +		16, /* RTE_CRYPTO_CIPHER_AES_CBC */
> +		/* TODO: add common algos */
> +};

Ditto.

> +
> +/**
> + * vhost_crypto struct is used to maintain a number of virtio_cryptos and
> + * one DPDK crypto device that deals with all crypto workloads. It is declared
> + * here and defined in vhost_crypto.c

The last note is not valid now.

> + */
> +struct vhost_crypto {
> +	/** Used to lookup DPDK Cryptodev Session based on VIRTIO crypto
> +	 *  session ID.
> +	 */
> +	struct rte_hash *session_map;
> +	struct rte_mempool *mbuf_pool;
> +	struct rte_mempool *sess_pool;
> +
> +	/** DPDK cryptodev ID */
> +	uint8_t cid;
> +	uint16_t nb_qps;
> +
> +	uint64_t last_session_id;
> +
> +	uint64_t cache_session_id;
> +	struct rte_cryptodev_sym_session *cache_session;
> +	/** socket id for the device */
> +	int socket_id;
> +
> +	struct virtio_net *dev;
> +
> +	uint8_t option;
> +} __rte_cache_aligned;
> +
> +struct vhost_crypto_data_req {
> +	struct vring_desc *head;
> +	struct rte_vhost_memory *mem;
> +	struct virtio_crypto_inhdr *inhdr;
> +
> +	uint16_t desc_idx;
> +	uint32_t len;
> +	struct vhost_virtqueue *vq;
> +
> +	uint8_t zero_copy;
> +
> +	int vid;
> +
> +	struct vring_desc *wb_desc;
> +	uint16_t wb_len;
> +};

You might want to adjust the sequence of the fields so that we will not 
have some holes.

> +
> +static int
> +transform_cipher_param(struct rte_crypto_sym_xform *xform,
> +		VhostUserCryptoSessionParam *param)
> +{
> +	int ret;
> +
> +	ret = cipher_algo_transform[param->cipher_algo];
> +	if (unlikely(ret < 0))
> +		return ret;
> +
> +	xform->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> +	xform->cipher.algo = ret;
> +	xform->cipher.key.length = param->cipher_key_len;
> +	if (xform->cipher.key.length > 0)
> +		xform->cipher.key.data = param->cipher_key_buf;
> +	ret = cipher_op_transform[param->dir];
> +	if (unlikely(ret < 0)) {
> +		VC_LOG_DBG("Bad operation type");
> +		return ret;
> +	}
> +	xform->cipher.op = ret;
> +	ret = iv_lens[xform->cipher.algo];
> +	if (unlikely(ret < 0))
> +		return ret;
> +	xform->cipher.iv.length = ret;
> +	xform->cipher.iv.offset = IV_OFFSET;
> +	return 0;
> +}
> +
> +static int
> +transform_chain_param(struct rte_crypto_sym_xform *xforms,
> +		VhostUserCryptoSessionParam *param)
> +{
> +	struct rte_crypto_sym_xform *xform_cipher, *xform_auth;
> +	int ret;
> +
> +	switch (param->chaining_dir) {
> +	case VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER:
> +		xform_auth = xforms;
> +		xform_cipher = xforms->next;
> +		xform_cipher->cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
> +		xform_auth->auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
> +		break;
> +	case VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH:
> +		xform_cipher = xforms;
> +		xform_auth = xforms->next;
> +		xform_cipher->cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
> +		xform_auth->auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
> +		break;
> +	default:
> +		return -VIRTIO_CRYPTO_BADMSG;
> +	}
> +
> +	/* cipher */
> +	ret = cipher_algo_transform[param->cipher_algo];
> +	if (unlikely(ret < 0))
> +		return ret;
> +	xform_cipher->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> +	xform_cipher->cipher.algo = ret;
> +	xform_cipher->cipher.key.length = param->cipher_key_len;
> +	xform_cipher->cipher.key.data = param->cipher_key_buf;
> +	ret = iv_lens[xform_cipher->cipher.algo];
> +	if (unlikely(ret < 0))
> +		return ret;
> +	xform_cipher->cipher.iv.length = ret;
> +	xform_cipher->cipher.iv.offset = IV_OFFSET;
> +
> +	/* auth */
> +	xform_auth->type = RTE_CRYPTO_SYM_XFORM_AUTH;
> +	ret = auth_algo_transform[param->hash_algo];
> +	if (unlikely(ret < 0))
> +		return ret;
> +	xform_auth->auth.algo = ret;
> +	xform_auth->auth.digest_length = param->digest_len;
> +	xform_auth->auth.key.length = param->auth_key_len;
> +	xform_auth->auth.key.data = param->auth_key_buf;
> +
> +	return 0;
> +}
> +
> +static void
> +vhost_crypto_create_sess(struct vhost_crypto *vcrypto,
> +		VhostUserCryptoSessionParam *sess_param)
> +{
> +	struct rte_crypto_sym_xform xform1 = {0}, xform2 = {0};
> +	struct rte_cryptodev_sym_session *session;
> +	int ret;
> +
> +	switch (sess_param->op_type) {
> +	case VIRTIO_CRYPTO_SYM_OP_NONE:
> +	case VIRTIO_CRYPTO_SYM_OP_CIPHER:
> +		ret = transform_cipher_param(&xform1, sess_param);
> +		if (unlikely(ret)) {
> +			VC_LOG_ERR("Error transform session msg (%i)", ret);
> +			sess_param->session_id = ret;
> +			return;
> +		}
> +		break;
> +	case VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING:
> +		if (unlikely(sess_param->hash_mode !=
> +				VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH)) {
> +			sess_param->session_id = -VIRTIO_CRYPTO_NOTSUPP;
> +			VC_LOG_ERR("Error transform session message (%i)",
> +					-VIRTIO_CRYPTO_NOTSUPP);
> +			return;
> +		}
> +
> +		xform1.next = &xform2;
> +
> +		ret = transform_chain_param(&xform1, sess_param);
> +		if (unlikely(ret)) {
> +			VC_LOG_ERR("Error transform session message (%i)", ret);
> +			sess_param->session_id = ret;
> +			return;
> +		}
> +
> +		break;
> +	default:
> +		VC_LOG_ERR("Algorithm not yet supported");
> +		sess_param->session_id = -VIRTIO_CRYPTO_NOTSUPP;
> +		return;
> +	}
> +
> +	session = rte_cryptodev_sym_session_create(vcrypto->sess_pool);
> +	if (!session) {
> +		VC_LOG_ERR("Failed to create session");
> +		sess_param->session_id = -VIRTIO_CRYPTO_ERR;
> +		return;
> +	}
> +
> +	if (rte_cryptodev_sym_session_init(vcrypto->cid, session, &xform1,
> +			vcrypto->sess_pool) < 0) {
> +		VC_LOG_ERR("Failed to initialize session");
> +		sess_param->session_id = -VIRTIO_CRYPTO_ERR;
> +		return;
> +	}
> +
> +	/* insert hash to map */
> +	if (rte_hash_add_key_data(vcrypto->session_map,
> +			&vcrypto->last_session_id, session) < 0) {
> +		VC_LOG_ERR("Failed to insert session to hash table");
> +
> +		if (rte_cryptodev_sym_session_clear(vcrypto->cid, session) < 0)
> +			VC_LOG_ERR("Failed to clear session");
> +		else {
> +			if (rte_cryptodev_sym_session_free(session) < 0)
> +				VC_LOG_ERR("Failed to free session");
> +		}
> +		sess_param->session_id = -VIRTIO_CRYPTO_ERR;
> +		return;
> +	}
> +
> +	VC_LOG_DBG("Session (key %lu, session %p) created.",
> +			vcrypto->last_session_id, session);
> +
> +	sess_param->session_id = vcrypto->last_session_id;
> +	vcrypto->last_session_id++;
> +}
> +
> +static int
> +vhost_crypto_close_sess(struct vhost_crypto *vcrypto, uint64_t session_id)
> +{
> +	struct rte_cryptodev_sym_session *session;
> +	uint64_t sess_id = session_id;
> +	int ret;
> +
> +	ret = rte_hash_lookup_data(vcrypto->session_map, &sess_id,
> +			(void **)&session);
> +
> +	if (unlikely(ret < 0)) {
> +		VC_LOG_ERR("Failed to delete session (key %lu).", session_id);
> +		return -VIRTIO_CRYPTO_INVSESS;
> +	}
> +
> +	if (rte_cryptodev_sym_session_clear(vcrypto->cid, session) < 0) {
> +		VC_LOG_DBG("Failed to delete session");
> +		return -VIRTIO_CRYPTO_ERR;
> +	}
> +
> +	if (rte_cryptodev_sym_session_free(session) < 0) {
> +		VC_LOG_DBG("Failed to delete session");
> +		return -VIRTIO_CRYPTO_ERR;
> +	}
> +
> +	if (rte_hash_del_key(vcrypto->session_map, &sess_id) < 0) {
> +		VC_LOG_DBG("Failed to delete session from hash table.");
> +		return -VIRTIO_CRYPTO_ERR;
> +	}
> +
> +	VC_LOG_DBG("Session (key %lu, session %p) deleted.", sess_id,
> +			session);
> +
> +	return 0;
> +}
> +
> +static int
> +vhost_crypto_msg_post_handler(int vid, void *msg, uint32_t *require_reply)
> +{
> +	struct virtio_net *dev = get_device(vid);
> +	struct vhost_crypto *vcrypto;
> +	VhostUserMsg *vmsg = msg;
> +	int ret = 0;
> +
> +	if (dev == NULL || require_reply == NULL) {
> +		VC_LOG_ERR("Invalid vid %i", vid);
> +		return -EINVAL;
> +	}
> +
> +	vcrypto = dev->extern_data;
> +	if (vcrypto == NULL) {
> +		VC_LOG_ERR("Cannot find required data, is it initialized?");
> +		return -ENOENT;
> +	}
> +
> +	*require_reply = 0;
> +
> +	if (vmsg->request.master == VHOST_USER_CRYPTO_CREATE_SESS) {
> +		vhost_crypto_create_sess(vcrypto,
> +				&vmsg->payload.crypto_session);
> +		*require_reply = 1;
> +	} else if (vmsg->request.master == VHOST_USER_CRYPTO_CLOSE_SESS)
> +		ret = vhost_crypto_close_sess(vcrypto, vmsg->payload.u64);
> +	else
> +		ret = -EINVAL;
> +
> +	return ret;
> +}



More information about the dev mailing list