[dpdk-dev] [PATCH v2] net/tap: perform proto field update for tun only
Wiles, Keith
keith.wiles at intel.com
Tue May 22 15:55:09 CEST 2018
> On May 22, 2018, at 6:05 AM, Varghese, Vipin <vipin.varghese at intel.com> wrote:
>
> Hi Ophir, Keith and Ferruh,
>
> I have shared v3 with all the suggested changes.
I just sent another change, sorry I did not catch if before, which I obviously was not paying attention.
>
> Thanks
> Vipin Varghese
>
>> -----Original Message-----
>> From: Varghese, Vipin
>> Sent: Tuesday, May 22, 2018 12:04 PM
>> To: Ophir Munk <ophirmu at mellanox.com>; dev at dpdk.org; Wiles, Keith
>> <keith.wiles at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>
>> Cc: Thomas Monjalon <thomas at monjalon.net>; Olga Shern
>> <olgas at mellanox.com>
>> Subject: RE: [PATCH v2] net/tap: perform proto field update for tun only
>>
>> Hi Ophir,
>>
>> Thanks for the suggestion, once these are merged to dpdk or dpdk-net mainline,
>> I can start the modifications.
>>
>> Thanks
>> Vipin Varghese
>>
>>> -----Original Message-----
>>> From: Ophir Munk [mailto:ophirmu at mellanox.com]
>>> Sent: Wednesday, May 16, 2018 3:59 AM
>>> To: Varghese, Vipin <vipin.varghese at intel.com>; dev at dpdk.org; Wiles,
>>> Keith <keith.wiles at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>
>>> Cc: Thomas Monjalon <thomas at monjalon.net>; Olga Shern
>>> <olgas at mellanox.com>
>>> Subject: RE: [PATCH v2] net/tap: perform proto field update for tun
>>> only
>>>
>>> Hi,
>>> I am adding my review although this patch has already been acked.
>>> Please find some comments inline. Otherwise it looks OK.
>>>
>>> Regards,
>>> Ophir
>>>
>>>> -----Original Message-----
>>>> From: Vipin Varghese [mailto:vipin.varghese at intel.com]
>>>> Sent: Tuesday, May 15, 2018 5:50 PM
>>>> To: dev at dpdk.org; keith.wiles at intel.com; ferruh.yigit at intel.com;
>>>> Ophir Munk <ophirmu at mellanox.com>
>>>> Cc: Vipin Varghese <vipin.varghese at intel.com>
>>>> Subject: [PATCH v2] net/tap: perform proto field update for tun only
>>>>
>>>> The TX function is shared between TAP and TUN PMD. Checking TUN-TAP
>>>> type field will ensure the TAP PMD will always have protocol field as 0.
>>>>
>>>> Signed-off-by: Vipin Varghese <vipin.varghese at intel.com>
>>>> Suggested-by: Ferruh Yigit <ferruh.yigit at intel.com>
>>>> ---
>>>>
>>>> Changes in V2:
>>>> updated in comment wording - Keith Wiles remove debug print from tx
>>>> code
>>>> - Keith Wiles
>>>> ---
>>>> drivers/net/tap/rte_eth_tap.c | 48
>>>> ++++++++++++++++++++++++++-----------
>>>> ------
>>>> drivers/net/tap/rte_eth_tap.h | 10 +++++++++
>>>> 2 files changed, 39 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/drivers/net/tap/rte_eth_tap.c
>>>> b/drivers/net/tap/rte_eth_tap.c index ea6d899..fafd557 100644
>>>> --- a/drivers/net/tap/rte_eth_tap.c
>>>> +++ b/drivers/net/tap/rte_eth_tap.c
>>>> @@ -115,7 +115,8 @@ tun_alloc(struct pmd_internals *pmd)
>>>> * Do not set IFF_NO_PI as packet information header will be needed
>>>> * to check if a received packet has been truncated.
>>>> */
>>>> - ifr.ifr_flags = (tap_type) ? IFF_TAP : IFF_TUN | IFF_POINTOPOINT;
>>>> + ifr.ifr_flags = (pmd->type == ETH_TUNTAP_TYPE_TAP) ?
>>>> + IFF_TAP : IFF_TUN | IFF_POINTOPOINT;
>>>> snprintf(ifr.ifr_name, IFNAMSIZ, "%s", pmd->name);
>>>>
>>>> TAP_LOG(DEBUG, "ifr_name '%s'", ifr.ifr_name); @@ -502,20
>>>> +503,22 @@ pmd_tx_burst(void *queue, struct rte_mbuf **bufs,
>>>> +uint16_t
>>>> nb_pkts)
>>>> if (rte_pktmbuf_pkt_len(mbuf) > max_size)
>>>> break;
>>>>
>>>> - /*
>>>> - * TUN and TAP are created with IFF_NO_PI disabled.
>>>> - * For TUN PMD this mandatory as fields are used by
>>>> - * Kernel tun.c to determine whether its IP or non IP
>>>> - * packets.
>>>> - *
>>>> - * The logic fetches the first byte of data from mbuf.
>>>> - * compares whether its v4 or v6. If none matches default
>>>> - * value 0x00 is taken for protocol field.
>>>> - */
>>>> - char *buff_data = rte_pktmbuf_mtod(seg, void *);
>>>> - j = (*buff_data & 0xf0);
>>>> - pi.proto = (j == 0x40) ? 0x0008 :
>>>> - (j == 0x60) ? 0xdd86 : 0x00;
>>>> + if (txq->type == ETH_TUNTAP_TYPE_TUN) {
>>>> + /*
>>>> + * TUN and TAP are created with IFF_NO_PI disabled.
>>>> + * For TUN PMD this mandatory as fields are used by
>>>> + * Kernel tun.c to determine whether its IP or non IP
>>>> + * packets.
>>>> + *
>>>> + * The logic fetches the first byte of data from mbuf
>>>> + * then compares whether its v4 or v6. If first byte
>>>> + * is 4 or 6, then protocol field is updated.
>>>> + */
>>>> + char *buff_data = rte_pktmbuf_mtod(seg, void *);
>>>> + j = (*buff_data & 0xf0);
>>>> + pi.proto = (j == 0x40) ? 0x0008 :
>>>> + (j == 0x60) ? 0xdd86 : 0x00;
>>>> + }
>>>>
>>>> iovecs[0].iov_base = π
>>>> iovecs[0].iov_len = sizeof(pi);
>>>> @@ -1052,6 +1055,9 @@ tap_setup_queue(struct rte_eth_dev *dev,
>>>> tx->mtu = &dev->data->mtu;
>>>> rx->rxmode = &dev->data->dev_conf.rxmode;
>>>>
>>>> + tx->type = pmd->type;
>>>> + rx->type = pmd->type;
>>>
>>> It seems there is no usage for rx->type in TAP code. Therefore - can
>>> you please remove rx->type assignment?
>>>> +
>>>> return *fd;
>>>> }
>>>>
>>>> @@ -1386,6 +1392,7 @@ eth_dev_tap_create(struct rte_vdev_device
>>>> *vdev, char *tap_name,
>>>> pmd = dev->data->dev_private;
>>>> pmd->dev = dev;
>>>> snprintf(pmd->name, sizeof(pmd->name), "%s", tap_name);
>>>> + pmd->type = ETH_TUNTAP_TYPE_UNKNOWN;
>>>>
>>>> pmd->ioctl_sock = socket(AF_INET, SOCK_DGRAM, 0);
>>>> if (pmd->ioctl_sock == -1) {
>>>> @@ -1421,7 +1428,9 @@ eth_dev_tap_create(struct rte_vdev_device
>>>> *vdev, char *tap_name,
>>>> pmd->txq[i].fd = -1;
>>>> }
>>>>
>>>> - if (tap_type) {
>>>> + pmd->type = (tap_type) ? ETH_TUNTAP_TYPE_TAP :
>>>> ETH_TUNTAP_TYPE_TUN;
>>>
>>> 1. It seem you are using 'tap_type' as a global static variable to
>>> pass a value to eth_dev_tap_create().
>>> Can you please pass this value by adding a parameter to
>>> eth_dev_tap_create() call and remove the global static variable?
>>> 2. You are using tap_type with values 0 and 1 which are converted to
>>> enums ETH_TUNTAP_TYPE_TUN and ETH_TUNTAP_TYPE_TAP respectively.
>> Can
>>> you please always just use the enums (avoiding the conversion)?
>>>
>>>> +
>>>> + if (pmd->type == ETH_TUNTAP_TYPE_TAP) {
>>>> if (is_zero_ether_addr(mac_addr))
>>>> eth_random_addr((uint8_t *)&pmd->eth_addr);
>>>> else
>>>> @@ -1440,7 +1449,7 @@ eth_dev_tap_create(struct rte_vdev_device
>>>> *vdev, char *tap_name,
>>>> if (tap_ioctl(pmd, SIOCSIFMTU, &ifr, 1, LOCAL_AND_REMOTE) < 0)
>>>> goto error_exit;
>>>>
>>>> - if (tap_type) {
>>>> + if (pmd->type == ETH_TUNTAP_TYPE_TAP) {
>>>> memset(&ifr, 0, sizeof(struct ifreq));
>>>> ifr.ifr_hwaddr.sa_family = AF_LOCAL;
>>>> rte_memcpy(ifr.ifr_hwaddr.sa_data, &pmd->eth_addr, @@ -
>>>> 1812,7 +1821,9 @@ rte_pmd_tap_remove(struct rte_vdev_device *dev)
>>>> struct pmd_internals *internals;
>>>> int i;
>>>>
>>>> - TAP_LOG(DEBUG, "Closing TUN/TAP Ethernet device on numa %u",
>>>> + internals = eth_dev->data->dev_private;
>>>> + TAP_LOG(DEBUG, "Closing %s Ethernet device on numa %u",
>>>> + (internals->type == ETH_TUNTAP_TYPE_TAP) ? "TAP" :
>>>> "TUN",
>>>> rte_socket_id());
>>>>
>>>> /* find the ethdev entry */
>>>> @@ -1820,7 +1831,6 @@ rte_pmd_tap_remove(struct rte_vdev_device
>>>> *dev)
>>>> if (!eth_dev)
>>>> return 0;
>>>>
>>>> - internals = eth_dev->data->dev_private;
>>>> if (internals->nlsk_fd) {
>>>> tap_flow_flush(eth_dev, NULL);
>>>> tap_flow_implicit_flush(internals, NULL); diff --git
>>>> a/drivers/net/tap/rte_eth_tap.h b/drivers/net/tap/rte_eth_tap.h
>>>> index 67c9d4b..8b0da5a 100644
>>>> --- a/drivers/net/tap/rte_eth_tap.h
>>>> +++ b/drivers/net/tap/rte_eth_tap.h
>>>> @@ -23,6 +23,13 @@
>>>> #define RTE_PMD_TAP_MAX_QUEUES 1
>>>> #endif
>>>>
>>>> +enum rte_tuntap_type {
>>>> + ETH_TUNTAP_TYPE_UNKNOWN,
>>>> + ETH_TUNTAP_TYPE_TUN,
>>>> + ETH_TUNTAP_TYPE_TAP,
>>>> + ETH_TUNTAP_TYPE_MAX,
>>>> +};
>>>> +
>>>> struct pkt_stats {
>>>> uint64_t opackets; /* Number of output packets */
>>>> uint64_t ipackets; /* Number of input packets */
>>>> @@ -38,6 +45,7 @@ struct rx_queue {
>>>> uint32_t trigger_seen; /* Last seen Rx trigger value */
>>>> uint16_t in_port; /* Port ID */
>>>> int fd;
>>>> + int type; /* Type field - TUN|TAP */
>>>
>>> In seems there is no usage for 'type' field from rx_queue struct in
>>> the code. If so
>>> - can you please remove it?
>>>
>>>> struct pkt_stats stats; /* Stats for this RX queue */
>>>> uint16_t nb_rx_desc; /* max number of mbufs available */
>>>> struct rte_eth_rxmode *rxmode; /* RX features */ @@ -48,6 +56,7
>>> @@
>>>> struct rx_queue {
>>>>
>>>> struct tx_queue {
>>>> int fd;
>>>> + int type; /* Type field - TUN|TAP */
>>>
>>> Please use spaces (like all other fields in this struct) instead of
>>> tabs, so all fields look aligned.
>>>
>>>> uint16_t *mtu; /* Pointer to MTU from dev_data */
>>>> uint16_t csum:1; /* Enable checksum offloading */
>>>> struct pkt_stats stats; /* Stats for this TX queue */
>>>> @@ -57,6 +66,7 @@ struct pmd_internals {
>>>> struct rte_eth_dev *dev; /* Ethernet device. */
>>>> char remote_iface[RTE_ETH_NAME_MAX_LEN]; /* Remote netdevice
>>> name */
>>>> char name[RTE_ETH_NAME_MAX_LEN]; /* Internal Tap device name */
>>>> + int type; /* Type field - TUN|TAP */
>>>
>>> Same comment here about replacing tabs with spaces
>>>
>>>> struct ether_addr eth_addr; /* Mac address of the device port */
>>>> struct ifreq remote_initial_flags; /* Remote netdevice flags on init
>>>> */
>>>> int remote_if_index; /* remote netdevice IF_INDEX */
>>>> --
>>>> 2.7.4
>
Regards,
Keith
More information about the dev
mailing list