[dpdk-dev] [PATCH v3 07/13] net/mlx5: add VXLAN support to flow prepare routine
Yongseok Koh
yskoh at mellanox.com
Thu Nov 1 22:03:23 CET 2018
On Thu, Nov 01, 2018 at 05:19:28AM -0700, Slava Ovsiienko wrote:
> The e-switch Flow prepare function is updated to support VXLAN
> encapsulation/and decapsulation actions. The function calculates
> buffer size for Netlink message and Flow description structures,
> including optional ones for tunneling purposes.
>
> Suggested-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> Signed-off-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_tcf.c | 133 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 130 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
> index 7e00232..b5be264 100644
> --- a/drivers/net/mlx5/mlx5_flow_tcf.c
> +++ b/drivers/net/mlx5/mlx5_flow_tcf.c
> @@ -2389,7 +2389,7 @@ struct pedit_parser {
> case RTE_FLOW_ITEM_TYPE_IPV6:
> size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
> SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
> - SZ_NLATTR_TYPE_OF(IPV6_ADDR_LEN) * 4;
> + SZ_NLATTR_DATA_OF(IPV6_ADDR_LEN) * 4;
> /* dst/src IP addr and mask. */
> flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
> break;
> @@ -2405,6 +2405,10 @@ struct pedit_parser {
> /* dst/src port and mask. */
> flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
> break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + size += SZ_NLATTR_TYPE_OF(uint32_t);
> + flags |= MLX5_FLOW_LAYER_VXLAN;
> + break;
> default:
> DRV_LOG(WARNING,
> "unsupported item %p type %d,"
> @@ -2418,6 +2422,69 @@ struct pedit_parser {
> }
>
> /**
> + * Calculate size of memory to store the VXLAN encapsultion
> + * related items in the Netlink message buffer. Items list
> + * is specified by RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP action.
> + * The item list should be validated.
> + *
> + * @param[in] action
> + * RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP action object.
> + * List of pattern items to scan data from.
> + *
> + * @return
> + * The size the part of Netlink message buffer to store the
> + * VXLAN encapsulation item attributes.
> + */
> +static int
> +flow_tcf_vxlan_encap_size(const struct rte_flow_action *action)
> +{
> + const struct rte_flow_item *items;
> + int size = 0;
> +
> + assert(action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP);
> + assert(action->conf);
> +
> + items = ((const struct rte_flow_action_vxlan_encap *)
> + action->conf)->definition;
> + assert(items);
> + for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> + switch (items->type) {
> + case RTE_FLOW_ITEM_TYPE_VOID:
> + break;
> + case RTE_FLOW_ITEM_TYPE_ETH:
> + /* This item does not require message buffer. */
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV4:
> + size += SZ_NLATTR_DATA_OF(IPV4_ADDR_LEN) * 2;
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV6:
> + size += SZ_NLATTR_DATA_OF(IPV6_ADDR_LEN) * 2;
> + break;
> + case RTE_FLOW_ITEM_TYPE_UDP: {
> + const struct rte_flow_item_udp *udp = items->mask;
> +
> + size += SZ_NLATTR_TYPE_OF(uint16_t);
> + if (!udp || udp->hdr.src_port != RTE_BE16(0x0000))
> + size += SZ_NLATTR_TYPE_OF(uint16_t);
> + break;
> + }
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + size += SZ_NLATTR_TYPE_OF(uint32_t);
> + break;
> + default:
> + assert(false);
> + DRV_LOG(WARNING,
> + "unsupported item %p type %d,"
> + " items must be validated"
> + " before flow creation",
> + (const void *)items, items->type);
> + return 0;
> + }
> + }
> + return size;
> +}
> +
> +/**
> * Calculate maximum size of memory for flow actions of Linux TC flower and
> * extract specified actions.
> *
> @@ -2486,6 +2553,29 @@ struct pedit_parser {
> SZ_NLATTR_TYPE_OF(uint16_t) + /* VLAN ID. */
> SZ_NLATTR_TYPE_OF(uint8_t); /* VLAN prio. */
> break;
> + case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> + size += SZ_NLATTR_NEST + /* na_act_index. */
> + SZ_NLATTR_STRZ_OF("tunnel_key") +
> + SZ_NLATTR_NEST + /* TCA_ACT_OPTIONS. */
> + SZ_NLATTR_TYPE_OF(uint8_t);
> + size += SZ_NLATTR_TYPE_OF(struct tc_tunnel_key);
> + size += flow_tcf_vxlan_encap_size(actions) +
> + RTE_ALIGN_CEIL /* preceding encap params. */
> + (sizeof(struct flow_tcf_vxlan_encap),
> + MNL_ALIGNTO);
> + flags |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
> + break;
> + case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> + size += SZ_NLATTR_NEST + /* na_act_index. */
> + SZ_NLATTR_STRZ_OF("tunnel_key") +
> + SZ_NLATTR_NEST + /* TCA_ACT_OPTIONS. */
> + SZ_NLATTR_TYPE_OF(uint8_t);
> + size += SZ_NLATTR_TYPE_OF(struct tc_tunnel_key);
> + size += RTE_ALIGN_CEIL /* preceding decap params. */
> + (sizeof(struct flow_tcf_vxlan_decap),
> + MNL_ALIGNTO);
> + flags |= MLX5_FLOW_ACTION_VXLAN_DECAP;
> + break;
> case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> @@ -2561,12 +2651,15 @@ struct pedit_parser {
> uint64_t *item_flags, uint64_t *action_flags,
> struct rte_flow_error *error)
> {
> - size_t size = sizeof(struct mlx5_flow) +
> + size_t size = RTE_ALIGN_CEIL
> + (sizeof(struct mlx5_flow),
> + alignof(struct flow_tcf_tunnel_hdr)) +
> MNL_ALIGN(sizeof(struct nlmsghdr)) +
> MNL_ALIGN(sizeof(struct tcmsg));
> struct mlx5_flow *dev_flow;
> struct nlmsghdr *nlh;
> struct tcmsg *tcm;
> + uint8_t *sp, *tun = NULL;
>
> size += flow_tcf_get_items_and_size(attr, items, item_flags);
> size += flow_tcf_get_actions_and_size(actions, action_flags);
> @@ -2577,10 +2670,44 @@ struct pedit_parser {
> "not enough memory to create E-Switch flow");
> return NULL;
> }
> - nlh = mnl_nlmsg_put_header((void *)(dev_flow + 1));
> + sp = (uint8_t *)(dev_flow + 1);
> + if (*action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP) {
> + sp = RTE_PTR_ALIGN
> + (sp, alignof(struct flow_tcf_tunnel_hdr));
> + tun = sp;
> + sp += RTE_ALIGN_CEIL
> + (sizeof(struct flow_tcf_vxlan_encap),
> + MNL_ALIGNTO);
> +#ifndef NDEBUG
> + size -= RTE_ALIGN_CEIL
> + (sizeof(struct flow_tcf_vxlan_encap),
> + MNL_ALIGNTO);
> +#endif
> + } else if (*action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
> + sp = RTE_PTR_ALIGN
> + (sp, alignof(struct flow_tcf_tunnel_hdr));
> + tun = sp;
> + sp += RTE_ALIGN_CEIL
> + (sizeof(struct flow_tcf_vxlan_decap),
> + MNL_ALIGNTO);
> +#ifndef NDEBUG
> + size -= RTE_ALIGN_CEIL
> + (sizeof(struct flow_tcf_vxlan_decap),
> + MNL_ALIGNTO);
> +#endif
> + } else {
> + sp = RTE_PTR_ALIGN(sp, MNL_ALIGNTO);
> + }
> + nlh = mnl_nlmsg_put_header(sp);
> tcm = mnl_nlmsg_put_extra_header(nlh, sizeof(*tcm));
> *dev_flow = (struct mlx5_flow){
> .tcf = (struct mlx5_flow_tcf){
> +#ifndef NDEBUG
> + .nlsize = size - RTE_ALIGN_CEIL
> + (sizeof(struct mlx5_flow),
> + alignof(struct flow_tcf_tunnel_hdr)),
> +#endif
> + .tunnel = (struct flow_tcf_tunnel_hdr *)tun,
> .nlh = nlh,
> .tcm = tcm,
> },
One favor. Can you set the header type here instead of _translate()?
dev_flow->tcf.tunnel->type = tun_type;
tun_type can be set above (FLOW_TCF_TUNACT_VXLAN_ENCAP/DECAP).
This is because I'm deleting flow->actions field and dev_flow->layers field as
it causes some confusion in parsing.
Please put my acked-by tag if you agree and make the change in v4.
Thanks,
Yongseok
More information about the dev
mailing list