[dpdk-dev] [PATCH] net/ixgbe: stop link setup alarm handler before device start

Ilya Maximets i.maximets at samsung.com
Thu Nov 8 11:24:01 CET 2018


We should stop alarm handler before resetting the HW to
avoid concurrent device reconfiguration.

Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link update")
CC: stable at dpdk.org

Signed-off-by: Ilya Maximets <i.maximets at samsung.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index c9e82d515..8148577f5 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2549,6 +2549,9 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 		return -EINVAL;
 	}
 
+	/* Stop the link setup handler before resetting the HW. */
+	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+
 	/* disable uio/vfio intr/eventfd mapping */
 	rte_intr_disable(intr_handle);
 
@@ -2731,8 +2734,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 	if (err)
 		goto error;
 
-	ixgbe_dev_link_update(dev, 0);
-
 skip_link_setup:
 
 	if (rte_intr_allow_others(intr_handle)) {
@@ -2768,6 +2769,12 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 			    "please call hierarchy_commit() "
 			    "before starting the port");
 
+	/*
+	 * Update link status right before return, because it may
+	 * start link configuration process in a separate thread.
+	 */
+	ixgbe_dev_link_update(dev, 0);
+
 	return 0;
 
 error:
@@ -5061,6 +5068,9 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
 
 	PMD_INIT_FUNC_TRACE();
 
+	/* Stop the link setup handler before resetting the HW. */
+	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+
 	err = hw->mac.ops.reset_hw(hw);
 	if (err) {
 		PMD_INIT_LOG(ERR, "Unable to reset vf hardware (%d)", err);
@@ -5096,8 +5106,6 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
 
 	ixgbevf_dev_rxtx_start(dev);
 
-	ixgbevf_dev_link_update(dev, 0);
-
 	/* check and configure queue intr-vector mapping */
 	if (rte_intr_cap_multiple(intr_handle) &&
 	    dev->data->dev_conf.intr_conf.rxq) {
@@ -5135,6 +5143,12 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
 	/* Re-enable interrupt for VF */
 	ixgbevf_intr_enable(dev);
 
+	/*
+	 * Update link status right before return, because it may
+	 * start link configuration process in a separate thread.
+	 */
+	ixgbevf_dev_link_update(dev, 0);
+
 	return 0;
 }
 
-- 
2.17.1



More information about the dev mailing list