[dpdk-dev] [PATCH v12 0/7] hot-unplug failure handle mechanism
jia.guo at intel.com
Tue Oct 2 14:32:34 CEST 2018
Hotplug is an important feature for use-cases like the datacenter device's
fail-safe and for SRIOV Live Migration in SDN/NFV. It could bring higher
flexibility and continuality to networking services in multiple use-cases
in the industry. So let's see how DPDK can help users implement hotplug
We already have a general device-event monitor mechanism, failsafe driver,
and hot plug/unplug API in DPDK. We have already got the solution of
“ethdev event + kernel PMD hotplug handler + failsafe”, but we still not
got “eal event + hotplug handler for pci PMD + failsafe” implement, and we
need to considerate 2 different solutions between uio pci and vfio pci.
In the case of hotplug for igb_uio, when a hardware device be removed
physically or disabled in software, the application needs to be notified
and detach the device out of the bus, and then make the device invalidate.
The problem is that, the removal of the device is not instantaneous in
software. If the application data path tries to read/write to the device
when removal is still in process, it will cause an MMIO error and
application will crash.
In this patch set, we propose a PCIe bus failure handler mechanism for
hot-unplug in igb_uio. It aims to guarantee that, when a hot-unplug occurs,
the application will not crash.
The mechanism should work as below:
First, the application enables the device event monitor, registers the
hotplug event’s callback and enable hotplug handling before running the
data path. Once the hot-unplug occurs, the mechanism will detect the
removal event and then accordingly do the failure handling. In order to
do that, the below functionality will be required:
- Add a new bus ops “hot_unplug_handler” to handle hot-unplug failure.
- Implement pci bus specific ops “pci_hot_unplug_handler”. For uio pci,
it will be based on the failure address to remap memory for the corresponding
device that unplugged. For vfio pci, could seperate implement case by case.
For the data path or other unexpected behaviors from the control path
when a hot unplug occurs:
- Add a new bus ops “sigbus_handler”, that is responsible for handling
the sigbus error which is either an original memory error, or a specific
memory error that is caused by a hot unplug. When a sigbus error is
captured, it will call this function to handle sigbus error.
- Implement PCI bus specific ops “pci_sigbus_handler”. It will iterate all
device on PCI bus to find which device encounter the failure.
- Implement a "rte_bus_sigbus_handler" to iterate all buses to find a bus
to handle the failure.
- Add a couple of APIs “rte_dev_hotplug_handle_enable” and
“rte_dev_hotplug_handle_diable” to enable/disable hotplug handling.
It will monitor the sigbus error by a handler which is per-process.
Based on the signal event principle, the control path thread and the
data path thread will randomly receive the sigbus error, but will call the
common sigbus process. When sigbus be captured, it will call the above API
to find bus to handle it.
The mechanism could be used by app or PMDs. For example, the whole process
of hotplug in testpmd is:
- Enable device event monitor->Enable hotplug handle->Register event callback
->attach port->start port->start forwarding->Device unplug->failure handle
->stop forwarding->stop port->close port->detach port.
This patch set would not cover hotplug insert and binding, and it is only
implement the igb_uio failure handler, the vfio hotplug failure handler
will be in next coming patch set.
add and delete some checking about sigbus recover.
change the ops name, since both uio and vfio will use the hot-unplug ops.
since we plan to abandon RTE_ETH_EVENT_INTR_RMV, change to use
RTE_DEV_EVENT_REMOVE, so modify the hotplug event and callback usage.
move the igb_uio fixing part, since it is random issue and should be considarate
as kernel driver defect but not include as this failure handler mechanism.
modify the api name and exposure out for public use.
add hotplug handle enable/disable APIs
refine commit log
refine commit log to be more readable.
refine errno process in sigbus handler.
refine igb uio release process
delete some unused part
refine some description about bus ops
refine commit log
add some entry check.
split patches to focus on the failure handle, remove the event usage
by testpmd to another patch.
change the hotplug failure handler name.
refine the sigbus handle logic.
add lock for udev state in igb uio driver.
split patches to be small and clear.
change to use new parameter "--hotplug-mode" in testpmd to identify
the eal hotplug and ethdev hotplug.
change bus ops name to bus_hotplug_handler.
add new API and bus ops of bus_signal_handler distingush handle generic.
sigbus and hotplug sigbus.
refine some doc and commit log.
fix igb uio kernel issue for control path failure rebase testpmd code.
Since the hot plug solution be discussed serval around in the public,
the scope be changed and the patch set be split into many times. Coming
to the recently RFC and feature design, it just focus on the hot unplug
failure handler at this patch set, so in order let this topic more clear
and focus, summarize privours patch set in history “v1(v21)”, the v2 here
go ahead for further track.
"v1(21)" == v21 as below:
split function in hot unplug ops.
sync failure hanlde to fix multiple process issue fix attach port issue for multiple devices case.
combind rmv callback function to be only one.
clean the code.
refine the remap logic for multiple device.
remove the auto binding.
note for limitation of multiple hotplug, fix some typo, sqeeze patch.
add document, add signal bus handler, refine the code to be more clear.
the prior patch history please check the patch set "add device event monitor framework".
Jeff Guo (7):
bus: add hot-unplug handler
bus/pci: implement hot-unplug handler ops
bus: add sigbus handler
bus/pci: implement sigbus handler ops
bus: add helper to handle sigbus
eal: add failure handle mechanism for hot-unplug
testpmd: use hot-unplug failure handle mechanism
app/test-pmd/testpmd.c | 39 ++++++--
doc/guides/rel_notes/release_18_08.rst | 5 +
drivers/bus/pci/pci_common.c | 81 ++++++++++++++++
drivers/bus/pci/pci_common_uio.c | 33 +++++++
drivers/bus/pci/private.h | 12 +++
lib/librte_eal/bsdapp/eal/eal_dev.c | 14 +++
lib/librte_eal/common/eal_common_bus.c | 43 +++++++++
lib/librte_eal/common/eal_private.h | 39 ++++++++
lib/librte_eal/common/include/rte_bus.h | 34 +++++++
lib/librte_eal/common/include/rte_dev.h | 26 +++++
lib/librte_eal/linuxapp/eal/eal_dev.c | 164 +++++++++++++++++++++++++++++++-
lib/librte_eal/rte_eal_version.map | 2 +
12 files changed, 483 insertions(+), 9 deletions(-)
More information about the dev