[dpdk-dev] [PATCH v2 4/4] net/mlx5: add L2 and L3 decap to Direct Verbs flow
Yongseok Koh
yskoh at mellanox.com
Mon Oct 8 23:19:01 CEST 2018
On Sun, Oct 07, 2018 at 05:25:08PM +0300, Dekel Peled wrote:
> This patch adds support for Direct Verbs decap operations, L2 and L3.
>
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>
Same comment for the order of 'dev' arg.
> Conflicts:
> drivers/net/mlx5/mlx5_flow_dv.c
What is this? Conflicts?
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 224 +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 219 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 221c76a..5b44f5b 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -120,11 +120,18 @@
> RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> "can't have 2 encap actions in same"
> " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> if (attr->ingress)
> return rte_flow_error_set(error, ENOTSUP,
> - RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
> - "encap action not supported for "
> - "ingress");
> + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "encap action not supported for "
> + "ingress");
It seems to be mistakenly included in this patch when you rebase the previous
patch. Please fix it in [4/4] and [3/4].
> return 0;
> }
>
> @@ -166,6 +173,12 @@
> RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> "can't have 2 encap actions in same"
> " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> if (attr->ingress)
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> @@ -176,6 +189,100 @@
> }
>
> /**
> + * Validate the tunnel decap action
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_decap(uint64_t action_flags,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and decap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 decap actions in same"
> + " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> + if (attr->egress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> + "decap action not supported for "
> + "egress");
> + return 0;
> +}
> +
> +/**
> + * Validate the tunnel decap L3 action
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the decap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_decap_l3(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + const struct rte_flow_action_tunnel_decap_l3 *tunnel_decap_l3 =
> + action->conf;
> +
> + if (!tunnel_decap_l3 || !(tunnel_decap_l3->buf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and decap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 decap actions in same"
> + " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> + if (attr->egress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> + "decap action not supported for "
> + "egress");
> + return 0;
> +}
> +
> +/**
> * Convert encap action to DV specification.
> *
> * @param[in] action
> @@ -245,6 +352,72 @@
> }
>
> /**
> + * Convert decap action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_decap(const struct rte_flow_action *action __rte_unused,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *decap_verb = NULL;
> + struct priv *priv = dev->data->dev_private;
> +
> + decap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, 0, NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> + if (!decap_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create decap action");
> + return decap_verb;
> +}
> +
> +/**
> + * Convert decap L3 action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_decap_l3(const struct rte_flow_action *action,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *decap_l3_verb = NULL;
> + const struct rte_flow_action_tunnel_decap_l3 *decap_l3_data;
> + struct priv *priv = dev->data->dev_private;
> +
> + decap_l3_data =
> + (const struct rte_flow_action_tunnel_decap_l3 *)action->conf;
> + decap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, decap_l3_data->size,
> + decap_l3_data->size ? decap_l3_data->buf : NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> + if (!decap_l3_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create decap L3 action");
> + return decap_l3_verb;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -505,6 +678,20 @@
> return ret;
> action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> + ret = flow_dv_validate_action_tunnel_decap
> + (action_flags, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> + ret = flow_dv_validate_action_tunnel_decap_l3
> + (action_flags, actions, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1300,6 +1487,30 @@
> flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> actions_n++;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_decap(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.decap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> + actions_n++;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_decap_l3(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.decap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> + actions_n++;
> + break;
> default:
> break;
> }
> @@ -1655,13 +1866,16 @@
> LIST_REMOVE(dev_flow, next);
> if (dev_flow->dv.matcher)
> flow_dv_matcher_release(dev, dev_flow->dv.matcher);
> -
It seems to be mistakenly included in this patch when you rebase the previous
patch. Please fix it in [4/4] and [3/4].
> if (dev_flow->dv.encap_verb) {
> claim_zero(mlx5_glue->destroy_flow_action
> (dev_flow->dv.encap_verb));
> dev_flow->dv.encap_verb = NULL;
> }
> -
Same here.
> + if (dev_flow->dv.decap_verb) {
> + claim_zero(mlx5_glue->destroy_flow_action
> + (dev_flow->dv.decap_verb));
> + dev_flow->dv.decap_verb = NULL;
> + }
> rte_free(dev_flow);
> }
> }
> --
> 1.8.3.1
>
More information about the dev
mailing list