[dpdk-dev] [PATCH] build: add PPC64 Meson build

[Chao Zhu]

Checked on ppc64, the build process is successful. 

> -----Original Message-----
> From: Luca Boccassi [mailto:bluca at debian.org]
> Sent: 2018年9月8日 2:35
> To: dev at dpdk.org
> Cc: chaozhu at linux.vnet.ibm.com; christian.ehrhardt at canonical.com;
> bruce.richardson at intel.com; thomas at monjalon.net
> Subject: [PATCH] build: add PPC64 Meson build
> 
> This has been only build-tested for now, on a native ppc64el POWER8E
machine
> running Debian sid.
> 
> Signed-off-by: Luca Boccassi <bluca at debian.org>
> ---
> The build box cannot be used to run DPDK as it doesn't have supported NICs
> and root access. Would be great if someone could run-test it, but at this
point I
> think build support is enough to get started.
> 
>  config/meson.build                               |  8 ++++++++
>  config/ppc_64/meson.build                        | 15
> +++++++++++++++
>  lib/librte_eal/common/arch/ppc_64/meson.build    |  5 +++++
>  .../common/include/arch/ppc_64/meson.build       | 16
> ++++++++++++++++
>  4 files changed, 44 insertions(+)
>  create mode 100644 config/ppc_64/meson.build  create mode 100644
> lib/librte_eal/common/arch/ppc_64/meson.build
>  create mode 100644 lib/librte_eal/common/include/arch/ppc_64/meson.build
> 
> diff --git a/config/meson.build b/config/meson.build index
> 4d755323f4..8e87b344c2 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -9,7 +9,13 @@ else
>  endif
>  dpdk_conf.set('RTE_MACHINE', machine)
>  machine_args = []
> +# ppc64 does not support -march=native
> +if host_machine.cpu_family().startswith('ppc') and machine == 'native'
> +machine_args += '-mcpu=' + machine
> +machine_args += '-mtune=' + machine
> +else
>  machine_args += '-march=' + machine
> +endif
> 
>  toolchain = cc.get_id()
>  dpdk_conf.set_quoted('RTE_TOOLCHAIN', toolchain) @@ -84,6 +90,8 @@ if
> host_machine.cpu_family().startswith('x86')
>  	arch_subdir = 'x86'
>  elif host_machine.cpu_family().startswith('arm') or
> host_machine.cpu_family().startswith('aarch')
>  	arch_subdir = 'arm'
> +elif host_machine.cpu_family().startswith('ppc')
> +	arch_subdir = 'ppc_64'
>  endif
>  subdir(arch_subdir)
>  dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS',
> ','.join(compile_time_cpuflags)) diff --git a/config/ppc_64/meson.build
> b/config/ppc_64/meson.build new file mode 100644 index
> 0000000000..d6faa7d64f
> --- /dev/null
> +++ b/config/ppc_64/meson.build
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca
> +Boccassi <bluca at debian.org>
> +
> +# for checking defines we need to use the correct compiler flags
> +march_opt = '-march=@0@'.format(machine)
> +
> +dpdk_conf.set('RTE_ARCH', 'ppc_64')
> +dpdk_conf.set('RTE_ARCH_PPC_64', 1)
> +dpdk_conf.set('RTE_ARCH_64', 1)
> +
> +# overrides specific to ppc64
> +dpdk_conf.set('RTE_MAX_LCORE', 256)
> +dpdk_conf.set('RTE_MAX_NUMA_NODES', 32)
> +dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> +dpdk_conf.set('RTE_MAX_LCORE', 256)
> diff --git a/lib/librte_eal/common/arch/ppc_64/meson.build
> b/lib/librte_eal/common/arch/ppc_64/meson.build
> new file mode 100644
> index 0000000000..40b3dc533a
> --- /dev/null
> +++ b/lib/librte_eal/common/arch/ppc_64/meson.build
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca
> +Boccassi <bluca at debian.org>
> +
> +eal_common_arch_sources = files('rte_cpuflags.c',
> +	'rte_cycles.c', 'rte_hypervisor.c')
> diff --git a/lib/librte_eal/common/include/arch/ppc_64/meson.build
> b/lib/librte_eal/common/include/arch/ppc_64/meson.build
> new file mode 100644
> index 0000000000..00f9611768
> --- /dev/null
> +++ b/lib/librte_eal/common/include/arch/ppc_64/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca
> +Boccassi <bluca at debian.org>
> +
> +install_headers(
> +	'rte_atomic.h',
> +	'rte_byteorder.h',
> +	'rte_cpuflags.h',
> +	'rte_cycles.h',
> +	'rte_io.h',
> +	'rte_memcpy.h',
> +	'rte_pause.h',
> +	'rte_prefetch.h',
> +	'rte_rwlock.h',
> +	'rte_spinlock.h',
> +	'rte_vect.h',
> +	subdir: get_option('include_subdir_arch'))
> --
> 2.18.0

Acked-by: Chao Zhu <chaozhu at linux.vnet.ibm.com>