[dpdk-dev] [PATCH] net/mlx5: eswitch-IP address UDP/TCP port rewrite

[Yongseok Koh]

On Tue, Sep 25, 2018 at 07:51:06PM +0800, Xiaoyu Min wrote:
> Offload the following rte_flow actions by inserting accordingly
> E-Switch rules via TC Flower driver
> 
>  - RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
>  - RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
>  - RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
>  - RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
>  - RTE_FLOW_ACTION_TYPE_SET_TP_SRC
>  - RTE_FLOW_ACTION_TYPE_SET_TP_DST

Can you put an example command of testpmd for the reference?

> Signed-off-by: Xiaoyu Min <jackmin at mellanox.com>
> ---
> This patch bases on Rahul Lakkireddy's patchs[1][2] and
> Yongseok Koh's patchset [3]
> 
> [1] https://patches.dpdk.org/patch/45191/
> [2] https://patches.dpdk.org/patch/45192/
> [3] https://patches.dpdk.org/project/dpdk/list/?series=1474
> 
> 
>  drivers/net/mlx5/Makefile        |   5 +
>  drivers/net/mlx5/meson.build     |   2 +
>  drivers/net/mlx5/mlx5_flow.h     |   6 +
>  drivers/net/mlx5/mlx5_flow_tcf.c | 356 +++++++++++++++++++++++++++++++
>  4 files changed, 369 insertions(+)
> 
> diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> index ca1de9f21..49b95e78e 100644
> --- a/drivers/net/mlx5/Makefile
> +++ b/drivers/net/mlx5/Makefile
> @@ -346,6 +346,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
>  		linux/tc_act/tc_vlan.h \
>  		enum TCA_VLAN_PUSH_VLAN_PRIORITY \
>  		$(AUTOCONF_OUTPUT)
> +	$Q sh -- '$<' '$@' \
> +		HAVE_TC_ACT_PEDIT \
> +		linux/tc_act/tc_pedit.h \
> +		enum TCA_PEDIT_KEY_EX_HDR_TYPE_UDP \
> +		$(AUTOCONF_OUTPUT)
>  	$Q sh -- '$<' '$@' \
>  		HAVE_SUPPORTED_40000baseKR4_Full \
>  		/usr/include/linux/ethtool.h \
> diff --git a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build
> index fd93ac162..ef6a85101 100644
> --- a/drivers/net/mlx5/meson.build
> +++ b/drivers/net/mlx5/meson.build
> @@ -182,6 +182,8 @@ if build
>  		'TCA_FLOWER_KEY_VLAN_ETH_TYPE' ],
>  		[ 'HAVE_TC_ACT_VLAN', 'linux/tc_act/tc_vlan.h',
>  		'TCA_VLAN_PUSH_VLAN_PRIORITY' ],
> +		[ 'HAVE_TC_ACT_PEDIT', 'linux/tc_act/tc_pedit.h',
> +		'TCA_PEDIT_KEY_EX_HDR_TYPE_UDP' ],
>  		[ 'HAVE_RDMA_NL_NLDEV', 'rdma/rdma_netlink.h',
>  		'RDMA_NL_NLDEV' ],
>  		[ 'HAVE_RDMA_NLDEV_CMD_GET', 'rdma/rdma_netlink.h',
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 10d700a7f..be182a643 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -87,6 +87,12 @@
>  #define MLX5_ACTION_OF_PUSH_VLAN (1u << 8)
>  #define MLX5_ACTION_OF_SET_VLAN_VID (1u << 9)
>  #define MLX5_ACTION_OF_SET_VLAN_PCP (1u << 10)
> +#define MLX5_ACTION_SET_IPV4_SRC (1u << 11)
> +#define MLX5_ACTION_SET_IPV4_DST (1u << 12)
> +#define MLX5_ACTION_SET_IPV6_SRC (1u << 13)
> +#define MLX5_ACTION_SET_IPV6_DST (1u << 14)
> +#define MLX5_ACTION_SET_TP_SRC (1u << 15)
> +#define MLX5_ACTION_SET_TP_DST (1u << 16)
>  
>  /* possible L3 layers protocols filtering. */
>  #define MLX5_IP_PROTOCOL_TCP 6
> diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
> index 14376188e..85c92f369 100644
> --- a/drivers/net/mlx5/mlx5_flow_tcf.c
> +++ b/drivers/net/mlx5/mlx5_flow_tcf.c
> @@ -53,6 +53,62 @@ struct tc_vlan {
>  
>  #endif /* HAVE_TC_ACT_VLAN */
>  
> +#ifdef HAVE_TC_ACT_PEDIT
> +
> +#include <linux/tc_act/tc_pedit.h>
> +
> +#else /* HAVE_TC_ACT_VLAN */
> +enum {
> +	TCA_PEDIT_UNSPEC,
> +	TCA_PEDIT_TM,
> +	TCA_PEDIT_PARMS,
> +	TCA_PEDIT_PAD,
> +	TCA_PEDIT_PARMS_EX,
> +	TCA_PEDIT_KEYS_EX,
> +	TCA_PEDIT_KEY_EX,
> +	__TCA_PEDIT_MAX
> +};
> +
> +enum {
> +	TCA_PEDIT_KEY_EX_HTYPE = 1,
> +	TCA_PEDIT_KEY_EX_CMD = 2,
> +	__TCA_PEDIT_KEY_EX_MAX
> +};
> +
> +enum pedit_header_type {
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_NETWORK = 0,
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_ETH = 1,
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_IP4 = 2,
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_IP6 = 3,
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_TCP = 4,
> +	TCA_PEDIT_KEY_EX_HDR_TYPE_UDP = 5,
> +	__PEDIT_HDR_TYPE_MAX,
> +};
> +
> +enum pedit_cmd {
> +	TCA_PEDIT_KEY_EX_CMD_SET = 0,
> +	TCA_PEDIT_KEY_EX_CMD_ADD = 1,
> +	__PEDIT_CMD_MAX,
> +};
> +
> +struct tc_pedit_key {
> +	__u32           mask;  /* AND */
> +	__u32           val;   /*XOR */
> +	__u32           off;  /*offset */
> +	__u32           at;
> +	__u32           offmask;
> +	__u32           shift;
> +};
> +
> +struct tc_pedit_sel {
> +	tc_gen;
> +	unsigned char           nkeys;
> +	unsigned char           flags;
> +	struct tc_pedit_key     keys[0];
> +};
> +
> +#endif /* HAVE_TC_ACT_VLAN */
> +
>  /* Normally found in linux/netlink.h. */
>  #ifndef NETLINK_CAP_ACK
>  #define NETLINK_CAP_ACK 10
> @@ -153,6 +209,14 @@ struct tc_vlan {
>  #define IPV6_ADDR_LEN 16
>  #endif
>  
> +#ifndef IPV4_ADDR_LEN
> +#define IPV4_ADDR_LEN 4
> +#endif
> +
> +#ifndef TP_PORT_LEN
> +#define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
> +#endif
> +
>  /** Empty masks for known item types. */
>  static const union {
>  	struct rte_flow_item_port_id port_id;
> @@ -227,6 +291,220 @@ struct flow_tcf_ptoi {
>  
>  #define MLX5_TCF_FATE_ACTIONS (MLX5_ACTION_DROP | MLX5_ACTION_PORT_ID)
>  
> +#define IS_MODIFY_ACTION(act_) ({typeof(act_) act = (act_); \
> +		((act) == RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV4_DST  || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC  || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_DST  || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_SRC    || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_DST) ?    \
> +		1 : 0; })

The reason why you need this complex multi-conditional macro is that
RTE_FLOW_ACTION_TYPE_* isn't a bitmask. But, as this actions will be converted
to MLX5_ACTION_* which is a bitmask, you can use that instead. Then, this
would be enough to be:

#define MLX5_TCF_SET_ACTIONS \
	(MLX5_ACTION_SET_IPV4_SRC | ...)

And in the flow_tcf_validate() below,
	if (action_flags & MLX5_TCF_SET_ACTIONS) {
		...
	}

And please note that I'm going to rename MLX5_ACTION_* to MLX5_FLOW_ACTION_*.
Please refer to "net/mlx5: rename flow macros" in PR #885. You might need to
rebase it again.

> +#define MAX_PEDIT_KEYS (128)
> +#define SZ_PEDIT_KEY_VAL (4)
> +
> +struct pedit_key_ex {
> +	enum pedit_header_type htype;
> +	enum pedit_cmd cmd;
> +};
> +
> +struct pedit_parser {
> +	struct tc_pedit_sel sel;
> +	struct tc_pedit_key keys[MAX_PEDIT_KEYS];
> +	struct pedit_key_ex keys_ex[MAX_PEDIT_KEYS];
> +};
> +
> +static int
> +flow_tcf_calc_pedit_keys(const uint64_t size)

Please add documentation by comment for every funcs you add.
Refer to the other existing ones for formality.

> +{
> +	int keys = (size / SZ_PEDIT_KEY_VAL) +
> +		((size % SZ_PEDIT_KEY_VAL) ? 1 : 0);

Indentation.

> +	return keys;
> +}
> +
> +static void
> +flow_tcf_pedit_key_set_tp_port(const struct rte_flow_action *actions,
> +				struct pedit_parser *p_parser,
> +				uint64_t item_flags)
> +{
> +	int idx = p_parser->sel.nkeys;
> +
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP)
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_UDP;
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP)
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_TCP;
> +	p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> +	p_parser->keys[idx].off =
> +		actions->type == RTE_FLOW_ACTION_TYPE_SET_TP_DST ? 2 : 0;

	assert(offsetof(struct tcp_hdr, src_port) ==
	       offsetof(struct udp_hdr, src_port));
	assert(offsetof(struct tcp_hdr, dst_port) ==
	       offsetof(struct udp_hdr, dst_port));
	p_parser->keys[idx].off =
		actions->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
		offsetof(struct tcp_hdr, src_port) :
		offsetof(struct tcp_hdr, dst_port);

assert() is just to be informative.
And how about src first like others below?

> +	p_parser->keys[idx].mask = 0xFFFF0000;
> +	p_parser->keys[idx].val = ((const struct rte_flow_action_set_tp *)
> +			actions->conf)->port;

Assigning 2B to 4B big-endian stroage? Doesn't look consistent with the mask
above - 0xffff0000.

> +	p_parser->sel.nkeys = (++idx);
> +}
> +
> +static void
> +flow_tcf_pedit_key_set_ipv6_addr(const struct rte_flow_action *actions,
> +				 struct pedit_parser *p_parser)
> +{
> +	int idx = p_parser->sel.nkeys;
> +	int keys = flow_tcf_calc_pedit_keys(IPV6_ADDR_LEN);
> +	int off_base =
> +		actions->type == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ? 8 : 24;

offsetof(struct ipv6_hdr, src_addr) :
offsetof(struct ipv6_hdr, dst_addr);

> +	const struct rte_flow_action_set_ipv6 *conf =
> +		(const struct rte_flow_action_set_ipv6 *)actions->conf;
> +
> +	for (int i = 0; i < keys; i++, idx++) {
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
> +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> +		p_parser->keys[idx].off = off_base + i * SZ_PEDIT_KEY_VAL;
> +		p_parser->keys[idx].mask = ~UINT32_MAX;
> +		memcpy(&p_parser->keys[idx].val,
> +			conf->ipv6_addr + i *  SZ_PEDIT_KEY_VAL,
> +			SZ_PEDIT_KEY_VAL);
> +	}
> +	p_parser->sel.nkeys += keys;
> +}
> +
> +static void
> +flow_tcf_pedit_key_set_ipv4_addr(const struct rte_flow_action *actions,

How about getting rte_flow_action_set_ipv4 instead of rte_flow_action?
Same comment for ipv6 and tp_port.

> +				 struct pedit_parser *p_parser)
> +{
> +	int idx = p_parser->sel.nkeys;
> +
> +	p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
> +	p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> +	p_parser->keys[idx].off =
> +		(actions->type == RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ? 12 : 16);

offsetof(struct ipv4_hdr, src_addr) :
offsetof(struct ipv4_hdr, dst_addr);

> +	p_parser->keys[idx].mask = ~UINT32_MAX;
> +	p_parser->keys[idx].val =
> +		((const struct rte_flow_action_set_ipv4 *)
> +		 actions->conf)->ipv4_addr;
> +	p_parser->sel.nkeys = (++idx);
> +}
> +
> +static int
> +flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
> +			      const struct rte_flow_action **actions,
> +			      uint64_t item_flags)
> +{
> +	struct pedit_parser p_parser;
> +
> +	memset(&p_parser, 0, sizeof(p_parser));
> +	mnl_attr_put_strz(nl, TCA_ACT_KIND, "pedit");
> +	struct nlattr *na_act_options = mnl_attr_nest_start(nl,
> +							    TCA_ACT_OPTIONS);
> +	/* all modify header actions should be in one tc-pedit action */
> +	for (; (*actions)->type != RTE_FLOW_ACTION_TYPE_END; (*actions)++) {

It seems that you want to aggregate all the pedit actions and form a single
na attr. But what if rte_flow_action_set_* are not contiguous? E.g.

flow create ... actions set1 / set2 / port_id / set3 / end

Then, it would have two pedit na attrs. Is that okay?
Or, need to think about another way?

Same will happen in flow_tcf_get_pedit_actions_size().

> +		switch ((*actions)->type) {
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> +			flow_tcf_pedit_key_set_ipv4_addr(*actions, &p_parser);
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> +			flow_tcf_pedit_key_set_ipv6_addr(*actions, &p_parser);
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +			flow_tcf_pedit_key_set_tp_port(*actions,
> +							&p_parser, item_flags);
> +			break;
> +		default:
> +			goto pedit_mnl_msg_done;
> +		}
> +	}
> +pedit_mnl_msg_done:
> +	p_parser.sel.action = TC_ACT_PIPE;
> +	mnl_attr_put(nl, TCA_PEDIT_PARMS_EX,
> +			sizeof(p_parser.sel) +
> +			p_parser.sel.nkeys * sizeof(struct tc_pedit_key),
> +			&p_parser);
> +	struct nlattr *na_pedit_keys = mnl_attr_nest_start(nl,
> +					TCA_PEDIT_KEYS_EX | NLA_F_NESTED);
> +	for (int i = 0; i < p_parser.sel.nkeys; i++) {
> +		struct nlattr *na_pedit_key = mnl_attr_nest_start(nl,
> +					TCA_PEDIT_KEY_EX | NLA_F_NESTED);
> +		mnl_attr_put_u16(nl, TCA_PEDIT_KEY_EX_HTYPE,
> +				 p_parser.keys_ex[i].htype);
> +		mnl_attr_put_u16(nl, TCA_PEDIT_KEY_EX_CMD,
> +				 p_parser.keys_ex[i].cmd);
> +		mnl_attr_nest_end(nl, na_pedit_key);
> +	}
> +	mnl_attr_nest_end(nl, na_pedit_keys);
> +	mnl_attr_nest_end(nl, na_act_options);
> +	(*actions)--;
> +	return 0;
> +}
> +
> +/**
> + * Calculate max memory size of one TC-pedit actions.
> + * One TC-pedit action can contain set of keys each defining
> + * a rewrite element (rte_flow action)
> + *
> + * @param[in] actions
> + *   actions specification.
> + * @param[inout] action_flags
> + *   actions flags
> + * @param[inout] size
> + *   accumulated size
> + * @return
> + *   Max memory size of one TC-pedit action
> + */
> +static int
> +flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
> +				uint64_t *action_flags)
> +{
> +	int pedit_size = 0;
> +	int keys = 0;
> +	uint64_t flags = 0;
> +
> +	pedit_size += SZ_NLATTR_NEST + /* na_act_index. */
> +		      SZ_NLATTR_STRZ_OF("pedit") +
> +		      SZ_NLATTR_NEST; /* TCA_ACT_OPTIONS. */
> +	for (; (*actions)->type != RTE_FLOW_ACTION_TYPE_END; (*actions)++) {
> +		switch ((*actions)->type) {
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> +			keys += flow_tcf_calc_pedit_keys(IPV4_ADDR_LEN);
> +			flags |= MLX5_ACTION_SET_IPV4_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> +			keys += flow_tcf_calc_pedit_keys(IPV4_ADDR_LEN);
> +			flags |= MLX5_ACTION_SET_IPV4_DST;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> +			keys += flow_tcf_calc_pedit_keys(IPV6_ADDR_LEN);
> +			flags |= MLX5_ACTION_SET_IPV6_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> +			keys += flow_tcf_calc_pedit_keys(IPV6_ADDR_LEN);
> +			flags |= MLX5_ACTION_SET_IPV6_DST;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> +			/* TCP is as same as UDP */
> +			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
> +			flags |= MLX5_ACTION_SET_TP_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +			/* TCP is as same as UDP */
> +			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
> +			flags |= MLX5_ACTION_SET_TP_DST;
> +			break;
> +		default:
> +			goto get_pedit_action_size_done;
> +		}
> +	}
> +get_pedit_action_size_done:
> +	/* TCA_PEDIT_PARAMS_EX */
> +	pedit_size += SZ_NLATTR_DATA_OF(sizeof(struct tc_pedit_sel) +
> +			keys * sizeof(struct tc_pedit_key));

> +	pedit_size += SZ_NLATTR_NEST; /* TCA_PEDIT_KEYS */
> +	pedit_size += keys *
> +		/* TCA_PEDIT_KEY_EX + HTYPE + CMD */
> +		(SZ_NLATTR_NEST + SZ_NLATTR_DATA_OF(2) + SZ_NLATTR_DATA_OF(2));
> +	(*action_flags) |= flags;
> +	(*actions)--;
> +	return pedit_size;
> +}
> +
>  /**
>   * Retrieve mask for pattern item.
>   *
> @@ -430,6 +708,8 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  			of_set_vlan_vid;
>  		const struct rte_flow_action_of_set_vlan_pcp *
>  			of_set_vlan_pcp;
> +		const struct rte_flow_action_set_ipv4 *set_ipv4;
> +		const struct rte_flow_action_set_ipv6 *set_ipv6;
>  	} conf;
>  	uint32_t item_flags = 0;
>  	uint32_t action_flags = 0;
> @@ -690,12 +970,64 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  		case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
>  			action_flags |= MLX5_ACTION_OF_SET_VLAN_PCP;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> +			action_flags |= MLX5_ACTION_SET_IPV4_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> +			action_flags |= MLX5_ACTION_SET_IPV4_DST;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> +			action_flags |= MLX5_ACTION_SET_IPV6_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> +			action_flags |= MLX5_ACTION_SET_IPV6_DST;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> +			action_flags |= MLX5_ACTION_SET_TP_SRC;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +			action_flags |= MLX5_ACTION_SET_TP_DST;
> +			break;
>  		default:
>  			return rte_flow_error_set(error, ENOTSUP,
>  						  RTE_FLOW_ERROR_TYPE_ACTION,
>  						  actions,
>  						  "action not supported");
>  		}
> +		if (IS_MODIFY_ACTION(actions->type)) {
> +			if (!actions->conf)
> +				return rte_flow_error_set(error, ENOTSUP,
> +						RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> +						actions,
> +						"action configuration not set");
> +		}
> +	}
> +	if (action_flags &
> +	   (MLX5_ACTION_SET_IPV4_SRC | MLX5_ACTION_SET_IPV4_DST)) {
> +		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4))
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  actions,
> +						  "no ipv4 item found in"
> +						  " pattern");
> +	}
> +	if (action_flags &
> +	   (MLX5_ACTION_SET_IPV6_SRC | MLX5_ACTION_SET_IPV6_DST)) {
> +		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6))
> +			return rte_flow_error_set(error, ENOTSUP,
> +				RTE_FLOW_ERROR_TYPE_ACTION,
> +				actions,
> +				"no ipv6 item found in pattern");
> +	}
> +	if (action_flags & (MLX5_ACTION_SET_TP_SRC | MLX5_ACTION_SET_TP_DST)) {
> +		if (!(item_flags &
> +		     (MLX5_FLOW_LAYER_OUTER_L4_UDP |
> +		      MLX5_FLOW_LAYER_OUTER_L4_TCP)))
> +			return rte_flow_error_set(error, ENOTSUP,
> +						RTE_FLOW_ERROR_TYPE_ACTION,
> +						actions,
> +						"no TCP/UDP item found in"
> +						" pattern");

Isn't this 'set' action compatible with drop action? No point of modifying
packet which will be dropped, isn't it?

>  	}
>  	return 0;
>  }
> @@ -840,6 +1172,15 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
>  				SZ_NLATTR_TYPE_OF(uint16_t) + /* VLAN ID. */
>  				SZ_NLATTR_TYPE_OF(uint8_t); /* VLAN prio. */
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +			size += flow_tcf_get_pedit_actions_size(&actions,
> +								&flags);
> +			break;
>  		default:
>  			DRV_LOG(WARNING,
>  				"unsupported action %p type %d,"
> @@ -998,6 +1339,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  	struct nlattr *na_flower_act;
>  	struct nlattr *na_vlan_id = NULL;
>  	struct nlattr *na_vlan_priority = NULL;
> +	uint64_t item_flags = 0;
>  
>  	claim_nonzero(flow_tcf_build_ptoi_table(dev, ptoi,
>  						PTOI_TABLE_SZ_MAX(dev)));
> @@ -1189,6 +1531,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  			}
>  			break;
>  		case RTE_FLOW_ITEM_TYPE_UDP:
> +			item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;

Let's add the same to the rest of items like flow_tcf_validate().


Thanks,
Yongseok

>  			mask.udp = flow_tcf_item_mask
>  				(items, &rte_flow_item_udp_mask,
>  				 &flow_tcf_mask_supported.udp,
> @@ -1218,6 +1561,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  			}
>  			break;
>  		case RTE_FLOW_ITEM_TYPE_TCP:
> +			item_flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
>  			mask.tcp = flow_tcf_item_mask
>  				(items, &rte_flow_item_tcp_mask,
>  				 &flow_tcf_mask_supported.tcp,
> @@ -1368,6 +1712,18 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  					conf.of_set_vlan_pcp->vlan_pcp;
>  			}
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> +		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +			na_act_index =
> +				mnl_attr_nest_start(nlh, na_act_index_cur++);
> +			flow_tcf_create_pedit_mnl_msg(nlh,
> +						      &actions, item_flags);
> +			mnl_attr_nest_end(nlh, na_act_index);
> +			break;
>  		default:
>  			return rte_flow_error_set(error, ENOTSUP,
>  						  RTE_FLOW_ERROR_TYPE_ACTION,
> -- 
> 2.17.1
>