[dpdk-dev] [PATCH v2 1/6] net/mlx5: fix default minimal data inline

[Raslan Darawsheh]

Hi,

> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Viacheslav Ovsiienko
> Sent: Monday, August 5, 2019 4:04 PM
> To: dev at dpdk.org
> Cc: Yongseok Koh <yskoh at mellanox.com>; Matan Azrad
> <matan at mellanox.com>
> Subject: [dpdk-dev] [PATCH v2 1/6] net/mlx5: fix default minimal data inline
> 
> The patch [Fixes] sets the default value of required minimal inline data to 0
> bytes. On some configurations (depends on switchdev/legacy settings and
> FW version/settings) the ConnectX-4LX NIC requires minimal 18 bytes of Tx
> descriptor inline data to operate correctly.
> 
> Wrongly set to 0 default value may prevent NIC from operating with out-of-
> the-box settings, this patch reverts default value for ConnectX-4LX back to 18
> bytes (inline L2).
> 
> Fixes: 9f350504bb32 ("net/mlx5: fix ConnectX-4LX minimal inline data limit")
> 
> Signed-off-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>
> Acked-by: Matan Azrad <matan at mellanox.com>
> ---
>  drivers/net/mlx5/mlx5.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> 909c22e..a3eacdb 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -1325,12 +1325,9 @@ struct mlx5_dev_spawn_data {
>  	switch (spawn->pci_dev->id.device_id) {
>  	case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
>  	case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
> -		config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
> -		config->hw_vlan_insert = 0;
> -		break;
>  	case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
>  	case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
> -		config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
> +		config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
>  		config->hw_vlan_insert = 0;
>  		break;
>  	case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
> --
> 1.8.3.1

Series applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh