[dpdk-dev] [RFC v1 0/3] show the Rx/Tx burst description field
Wang, Haiyue
haiyue.wang at intel.com
Mon Aug 12 18:00:27 CEST 2019
> -----Original Message-----
> From: Stephen Hemminger [mailto:stephen at networkplumber.org]
> Sent: Monday, August 12, 2019 23:54
> To: Wang, Haiyue <haiyue.wang at intel.com>
> Cc: David Marchand <david.marchand at redhat.com>; dev <dev at dpdk.org>
> Subject: Re: [dpdk-dev] [RFC v1 0/3] show the Rx/Tx burst description field
>
> On Mon, 12 Aug 2019 15:42:45 +0000
> "Wang, Haiyue" <haiyue.wang at intel.com> wrote:
>
> > > -----Original Message-----
> > > From: Stephen Hemminger [mailto:stephen at networkplumber.org]
> > > Sent: Monday, August 12, 2019 23:38
> > > To: David Marchand <david.marchand at redhat.com>
> > > Cc: Wang, Haiyue <haiyue.wang at intel.com>; dev <dev at dpdk.org>
> > > Subject: Re: [dpdk-dev] [RFC v1 0/3] show the Rx/Tx burst description field
> > >
> > > On Mon, 12 Aug 2019 16:27:11 +0200
> > > David Marchand <david.marchand at redhat.com> wrote:
> > >
> > > > On Mon, Aug 12, 2019 at 4:20 PM Haiyue Wang <haiyue.wang at intel.com> wrote:
> > > > >
> > > > > Since some PMDs have multi-path for Rx/Tx, FD.io VPP will tell you in
> > > > > the Debug CLI what rx/tx function is being used:
> > > > > #show hardware-interface
> > > > >
> > > > > tx burst function: ice_xmit_pkts
> > > > > rx burst function: ice_recv_scattered_pkts
> > > > >
> > > > > But if the tx/rx is static, then 'dladdr' will return nil:
> > > > >
> > > > > tx burst function: (nil) │······················
> > > > > rx burst function: (nil) │······················
> > > > >
> > > > > For making things consistent and gracefull, we introduce an new string
> > > > > field to describe the Rx/Tx burst information. This is vendor-neutral,
> > > > > it is used to identify the Rx/Tx burst selection if the PMD has more
> > > > > than one.
> > > > >
> > > > > If a PMD supports this, then rxqinfo/txqinfo->burst_info[0] != '\0'.
> > > >
> > > > The rx/tx handlers are the same for all queues of a ethdev port.
> > > > What is the added value to put this in a per queue api ?
> > >
> > > With some symbol table lookup tools it is possible to do introspection
> > > to find the symbol from the function pointer. Without breaking API/ABI.
> >
> > Sounds cool, any link can be reached ?
> >
> > VPP uses as below, but will fail for static function.
> >
> > static const char *
> > ptr2sname (void *p)
> > {
> > Dl_info info = { 0 };
> >
> > if (dladdr (p, &info) == 0)
> > return 0;
> >
> > return info.dli_sname;
> > }
>
> You need to link with -g and not strip the binary.
You mean gdb debug mode, I guess they will not accept this also. ;-)
More information about the dev
mailing list