[dpdk-dev] [v5] net/i40e: fix vf runtime queues rss config

Zhang, Xiao xiao.zhang at intel.com
Tue Aug 13 09:59:26 CEST 2019



> -----Original Message-----
> From: Ye, Xiaolong
> Sent: Tuesday, August 13, 2019 3:37 PM
> To: Zhang, Xiao <xiao.zhang at intel.com>
> Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; stable at dpdk.org
> Subject: Re: [dpdk-dev] [v5] net/i40e: fix vf runtime queues rss config
> 
> On 08/13, Zhang, Xiao wrote:
> >
> >
> >> -----Original Message-----
> >> From: Ye, Xiaolong
> >> Sent: Tuesday, August 13, 2019 2:28 PM
> >> To: Zhang, Xiao <xiao.zhang at intel.com>
> >> Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>;
> >> stable at dpdk.org
> >> Subject: Re: [dpdk-dev] [v5] net/i40e: fix vf runtime queues rss
> >> config
> >>
> >> Hi, Xiao
> >>
> >> On 08/13, Xiao Zhang wrote:
> >> >I40evf queue can not work properly with kernel pf driver. Eg. when
> >> >configure 8 queues pair, only 4 queues can receive packets, and half
> >> >packets will be lost if using 2 queues pair.
> >> >This issue is caused by misconfiguration of look up table, use aq
> >> >command to setup the lut to make it work properly.
> >>
> >> So the original code of lookup table configuration is problematic?
> >> Can we just remove them?
> >
> >The original code does not work with device X722 VF. For other devices using
> i40evf, the original code works.
> >The commit message may missed this information.
> >And the new code only workable for devices capable with AQ command, so we
> can not remove the original code.
> 
> Ok, can you add these info in your commit message and send a new version?
> 

Yes, it's ok.

> Thanks,
> Xiaolong
> 
> >
> >>
> >> Thanks,
> >> Xiaolong
> >>
> >> >
> >> >Fixes: cea7a51c1750 ("i40evf: support RSS")
> >> >Cc: stable at dpdk.org
> >> >
> >> >Signed-off-by: Xiao Zhang <xiao.zhang at intel.com>
> >> >---
> >> >v5 fix compile issue
> >> >v4 move local variable definition to the begin of the function
> >> >v3 move LUT configuration in to i40evf_configure_rss
> >> >v2 change for loop format to avoid build patch issue
> >> >---
> >> > drivers/net/i40e/i40e_ethdev_vf.c | 32
> >> >++++++++++++++++++++++++++------
> >> > 1 file changed, 26 insertions(+), 6 deletions(-)
> >> >
> >> >diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> >> >b/drivers/net/i40e/i40e_ethdev_vf.c
> >> >index 308fb98..c77b30c 100644
> >> >--- a/drivers/net/i40e/i40e_ethdev_vf.c
> >> >+++ b/drivers/net/i40e/i40e_ethdev_vf.c
> >> >@@ -2598,7 +2598,10 @@ i40evf_config_rss(struct i40e_vf *vf)
> >> > 	struct i40e_hw *hw = I40E_VF_TO_HW(vf);
> >> > 	struct rte_eth_rss_conf rss_conf;
> >> > 	uint32_t i, j, lut = 0, nb_q = (I40E_VFQF_HLUT_MAX_INDEX + 1) * 4;
> >> >+	uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) * 4;
> >> > 	uint16_t num;
> >> >+	uint8_t *lut_info;
> >> >+	int ret;
> >> >
> >> > 	if (vf->dev_data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> >> > 		i40evf_disable_rss(vf);
> >> >@@ -2608,12 +2611,29 @@ i40evf_config_rss(struct i40e_vf *vf)
> >> >
> >> > 	num = RTE_MIN(vf->dev_data->nb_rx_queues,
> >> I40E_MAX_QP_NUM_PER_VF);
> >> > 	/* Fill out the look up table */
> >> >-	for (i = 0, j = 0; i < nb_q; i++, j++) {
> >> >-		if (j >= num)
> >> >-			j = 0;
> >> >-		lut = (lut << 8) | j;
> >> >-		if ((i & 3) == 3)
> >> >-			I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
> >> >+	if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) {
> >> >+		for (i = 0, j = 0; i < nb_q; i++, j++) {
> >> >+			if (j >= num)
> >> >+				j = 0;
> >> >+			lut = (lut << 8) | j;
> >> >+			if ((i & 3) == 3)
> >> >+				I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2),
> >> lut);
> >> >+		}
> >> >+	} else {
> >> >+		lut_info = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0);
> >> >+		if (!lut_info) {
> >> >+			PMD_DRV_LOG(ERR, "No memory can be allocated");
> >> >+			return -ENOMEM;
> >> >+		}
> >> >+
> >> >+		for (i = 0; i < rss_lut_size; i++)
> >> >+			lut_info[i] = i % vf->num_queue_pairs;
> >> >+
> >> >+		ret = i40evf_set_rss_lut(&vf->vsi, lut_info,
> >> >+					 rss_lut_size);
> >> >+		rte_free(lut_info);
> >> >+		if (ret)
> >> >+			return ret;
> >> > 	}
> >> >
> >> > 	rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf;
> >> >--
> >> >2.7.4
> >> >


More information about the dev mailing list