[dpdk-dev] [PATCH 22/22] net/hns3: add hns3 build files

Wei Hu (Xavier) xavier.huwei at huawei.com
Fri Aug 23 15:47:11 CEST 2019
Previous message: [dpdk-dev] [PATCH 21/22] net/hns3: add multiple process support for hns3 PMD driver
Next message: [dpdk-dev] [PATCH 22/22] net/hns3: add hns3 build files
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
This patch add build related files for hns3 PMD driver.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong at huawei.com>
Signed-off-by: Hao Chen <chenhao164 at huawei.com>
Signed-off-by: Huisong Li <lihuisong at huawei.com>
---
 MAINTAINERS                                  |  7 ++++
 config/common_armv8a_linux                   |  5 +++
 config/common_base                           |  5 +++
 config/defconfig_arm64-armv8a-linuxapp-clang |  2 +
 doc/guides/nics/features/hns3.ini            | 38 +++++++++++++++++++
 doc/guides/nics/hns3.rst                     | 55 ++++++++++++++++++++++++++++
 drivers/net/Makefile                         |  1 +
 drivers/net/hns3/Makefile                    | 43 ++++++++++++++++++++++
 drivers/net/hns3/meson.build                 | 19 ++++++++++
 drivers/net/hns3/rte_pmd_hns3_version.map    |  3 ++
 drivers/net/meson.build                      |  1 +
 mk/rte.app.mk                                |  1 +
 12 files changed, 180 insertions(+)
 create mode 100644 doc/guides/nics/features/hns3.ini
 create mode 100644 doc/guides/nics/hns3.rst
 create mode 100644 drivers/net/hns3/Makefile
 create mode 100644 drivers/net/hns3/meson.build
 create mode 100644 drivers/net/hns3/rte_pmd_hns3_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 4100260..1794923 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -616,6 +616,13 @@ F: drivers/net/hinic/
 F: doc/guides/nics/hinic.rst
 F: doc/guides/nics/features/hinic.ini
 
+Hisilicon hns3
+M: Wei Hu (Xavier) <xavier.huwei at huawei.com>
+M: Min Hu (Connor) <humin29 at huawei.com>
+F: drivers/net/hns3/
+F: doc/guides/nics/hns3.rst
+F: doc/guides/nics/features/hns3.ini
+
 Intel e1000
 M: Wenzhuo Lu <wenzhuo.lu at intel.com>
 T: git://dpdk.org/next/dpdk-next-net-intel
diff --git a/config/common_armv8a_linux b/config/common_armv8a_linux
index 481712e..bf455c5 100644
--- a/config/common_armv8a_linux
+++ b/config/common_armv8a_linux
@@ -37,3 +37,8 @@ CONFIG_RTE_LIBRTE_AVP_PMD=n
 CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
 
 CONFIG_RTE_SCHED_VECTOR=n
+
+#
+# Hisilicon HNS3 PMD driver
+#
+CONFIG_RTE_LIBRTE_HNS3_PMD=y
diff --git a/config/common_base b/config/common_base
index 8ef75c2..71a2c33 100644
--- a/config/common_base
+++ b/config/common_base
@@ -282,6 +282,11 @@ CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_LIBRTE_HINIC_PMD=n
 
 #
+# Compile burst-oriented HNS3 PMD driver
+#
+CONFIG_RTE_LIBRTE_HNS3_PMD=n
+
+#
 # Compile burst-oriented IXGBE PMD driver
 #
 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
diff --git a/config/defconfig_arm64-armv8a-linuxapp-clang b/config/defconfig_arm64-armv8a-linuxapp-clang
index d3b4dad..c73f5fb 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-clang
+++ b/config/defconfig_arm64-armv8a-linuxapp-clang
@@ -6,3 +6,5 @@
 
 CONFIG_RTE_TOOLCHAIN="clang"
 CONFIG_RTE_TOOLCHAIN_CLANG=y
+
+CONFIG_RTE_LIBRTE_HNS3_PMD=n
diff --git a/doc/guides/nics/features/hns3.ini b/doc/guides/nics/features/hns3.ini
new file mode 100644
index 0000000..d38d35e
--- /dev/null
+++ b/doc/guides/nics/features/hns3.ini
@@ -0,0 +1,38 @@
+;
+; Supported features of the 'hns3' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status          = Y
+MTU update           = Y
+Jumbo frame          = Y
+Promiscuous mode     = Y
+Allmulticast mode    = Y
+Unicast MAC filter   = Y
+Multicast MAC filter = Y
+RSS hash             = Y
+RSS key update       = Y
+RSS reta update      = Y
+DCB                  = Y
+VLAN filter          = Y
+Flow director        = Y
+Flow control         = Y
+Flow API             = Y
+CRC offload          = Y
+VLAN offload         = Y
+L3 checksum offload  = Y
+L4 checksum offload  = Y
+Inner L3 checksum    = Y
+Inner L4 checksum    = Y
+Basic stats          = Y
+Extended stats       = Y
+Stats per queue      = Y
+Linux UIO            = Y
+Linux VFIO           = Y
+BSD nic_uio          = N
+x86-64               = N
+ARMv8                = Y
+ARMv7                = N
+x86-32               = N
+Power8               = N
diff --git a/doc/guides/nics/hns3.rst b/doc/guides/nics/hns3.rst
new file mode 100644
index 0000000..c9d0253
--- /dev/null
+++ b/doc/guides/nics/hns3.rst
@@ -0,0 +1,55 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018-2019 Hisilicon Limited.
+
+HNS3 Poll Mode Driver
+===============================
+
+The Hisilicon Network Subsystem is a long term evolution IP which is
+supposed to be used in Hisilicon ICT SoCs such as Kunpeng 920.
+
+The HNS3 PMD (librte_pmd_hns3) provides poll mode driver support
+for hns3(Hisilicon Network Subsystem 3) network engine.
+
+Features
+--------
+
+Features of the HNS3 PMD are:
+
+- Arch support: ARMv8.
+- Multiple queues for TX and RX
+- Receive Side Scaling (RSS)
+- Packet type information
+- Checksum offload
+- Promiscuous mode
+- Multicast mode
+- Port hardware statistics
+- Jumbo frames
+- Link state information
+- VLAN stripping
+- NUMA support
+
+Prerequisites
+-------------
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_HNS3_PMD`` (default ``y``)
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+Limitations or Known issues
+---------------------------
+Build with clang is not supported yet.
+Currently, only ARMv8 architecture is supported.
\ No newline at end of file
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5767fdf..1770d8b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -30,6 +30,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
 DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
 DIRS-$(CONFIG_RTE_LIBRTE_HINIC_PMD) += hinic
+DIRS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3
 DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
 DIRS-$(CONFIG_RTE_LIBRTE_IAVF_PMD) += iavf
 DIRS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice
diff --git a/drivers/net/hns3/Makefile b/drivers/net/hns3/Makefile
new file mode 100644
index 0000000..a2e6502
--- /dev/null
+++ b/drivers/net/hns3/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018-2019 Hisilicon Limited.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_hns3.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API -fsigned-char
+
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash
+LDLIBS += -lrte_bus_pci
+
+EXPORT_MAP := rte_pmd_hns3_version.map
+
+LIBABIVER := 2
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_ethdev_vf.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_cmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_mbx.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_rss.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_flow.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_fdir.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_intr.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_stats.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_regs.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_dcb.c
+SRCS-$(CONFIG_RTE_LIBRTE_HNS3_PMD) += hns3_mp.c
+
+# install this header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_HNS3_PMD)-include := hns3_ethdev.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/hns3/meson.build b/drivers/net/hns3/meson.build
new file mode 100644
index 0000000..ad301a5
--- /dev/null
+++ b/drivers/net/hns3/meson.build
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018-2019 Hisilicon Limited
+
+sources = files('hns3_cmd.c',
+	'hns3_dcb.c',
+	'hns3_intr.c',
+	'hns3_ethdev.c',
+	'hns3_ethdev_vf.c',
+	'hns3_fdir.c',
+	'hns3_flow.c',
+	'hns3_mbx.c',
+	'hns3_regs.c',
+	'hns3_rss.c',
+	'hns3_rxtx.c',
+	'hns3_stats.c',
+	'hns3_mp.c')
+deps += ['hash']
+
+cflags += '-DALLOW_EXPERIMENTAL_API'
diff --git a/drivers/net/hns3/rte_pmd_hns3_version.map b/drivers/net/hns3/rte_pmd_hns3_version.map
new file mode 100644
index 0000000..3aef967
--- /dev/null
+++ b/drivers/net/hns3/rte_pmd_hns3_version.map
@@ -0,0 +1,3 @@
+DPDK_19.08 {
+	 local: *;
+};
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 513f19b..eb1c6b6 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -18,6 +18,7 @@ drivers = ['af_packet',
 	'failsafe',
 	'fm10k', 'i40e',
 	'hinic',
+	'hns3',
 	'iavf',
 	'ice',
 	'ifc',
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index ba5c39e..17b9916 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -172,6 +172,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD)       += -lrte_pmd_enic
 _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD)      += -lrte_pmd_fm10k
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE)   += -lrte_pmd_failsafe
 _LDLIBS-$(CONFIG_RTE_LIBRTE_HINIC_PMD)      += -lrte_pmd_hinic
+_LDLIBS-$(CONFIG_RTE_LIBRTE_HNS3_PMD)       += -lrte_pmd_hns3
 _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD)       += -lrte_pmd_i40e
 _LDLIBS-$(CONFIG_RTE_LIBRTE_IAVF_PMD)       += -lrte_pmd_iavf
 _LDLIBS-$(CONFIG_RTE_LIBRTE_ICE_PMD)        += -lrte_pmd_ice
-- 
2.7.4
Previous message: [dpdk-dev] [PATCH 21/22] net/hns3: add multiple process support for hns3 PMD driver
Next message: [dpdk-dev] [PATCH 22/22] net/hns3: add hns3 build files
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dev mailing list