[dpdk-dev] [PATCH v2] net/virtio: add link speed tuning

[Tiwei Bie]

On Fri, Dec 13, 2019 at 08:39:11PM +0300, Ivan Dyukov wrote:
> Hi Maxime,
> Thank you for comments.
> 
> 
> 13.12.2019 17:59, Maxime Coquelin пишет:
> > Hi Ivan,
> >
> > On 12/13/19 3:44 PM, Ivan Dyukov wrote:
> >> Some applications like pktgen use link_speed to calculate transmit
> >> rate. It limits outcome traffic to hardcoded 10G.
> >>
> >> This patch makes link_speed configurable at compile time.
> >>
> >> Signed-off-by: Ivan Dyukov <i.dyukov at samsung.com>
> >> ---
> >>   config/common_base                 |  1 +
> >>   config/meson.build                 |  1 +
> >>   drivers/net/vhost/rte_eth_vhost.c  |  2 +-
> >>   drivers/net/virtio/virtio_ethdev.c | 20 ++++++++++++++++----
> >>   4 files changed, 19 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/config/common_base b/config/common_base
> >> index 7dec7ed45..8589ca4ec 100644
> >> --- a/config/common_base
> >> +++ b/config/common_base
> >> @@ -433,6 +433,7 @@ CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
> >>   # Compile burst-oriented VIRTIO PMD driver
> >>   #
> >>   CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
> >> +CONFIG_RTE_LIBRTE_VIRTIO_LINK_SPEED=10000
> >>   CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
> >>   CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
> >>   CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
> >> diff --git a/config/meson.build b/config/meson.build
> >> index 364a8d739..78c30f334 100644
> >> --- a/config/meson.build
> >> +++ b/config/meson.build
> >> @@ -202,6 +202,7 @@ dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> >>   dpdk_conf.set('RTE_MAX_VFIO_GROUPS', 64)
> >>   dpdk_conf.set('RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB', 64)
> >>   dpdk_conf.set('RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', true)
> >> +dpdk_conf.set('RTE_LIBRTE_VIRTIO_LINK_SPEED', 10000)
> >>   
> >>   
> >>   compile_time_cpuflags = []
> >> diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
> >> index 46f01a7f4..38eaa5955 100644
> >> --- a/drivers/net/vhost/rte_eth_vhost.c
> >> +++ b/drivers/net/vhost/rte_eth_vhost.c
> >> @@ -115,7 +115,7 @@ static struct internal_list_head internal_list =
> >>   static pthread_mutex_t internal_list_lock = PTHREAD_MUTEX_INITIALIZER;
> >>   
> >>   static struct rte_eth_link pmd_link = {
> >> -		.link_speed = 10000,
> >> +		.link_speed = RTE_LIBRTE_VIRTIO_LINK_SPEED,
> >>   		.link_duplex = ETH_LINK_FULL_DUPLEX,
> >>   		.link_status = ETH_LINK_DOWN
> >>   };
> >> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> >> index 044eb10a7..948091cc2 100644
> >> --- a/drivers/net/virtio/virtio_ethdev.c
> >> +++ b/drivers/net/virtio/virtio_ethdev.c
> >> @@ -2371,7 +2371,7 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
> >>   
> >>   	memset(&link, 0, sizeof(link));
> >>   	link.link_duplex = ETH_LINK_FULL_DUPLEX;
> >> -	link.link_speed  = ETH_SPEED_NUM_10G;
> >> +	link.link_speed  = RTE_LIBRTE_VIRTIO_LINK_SPEED;
> >>   	link.link_autoneg = ETH_LINK_FIXED;
> >>   
> >>   	if (!hw->started) {
> >> @@ -2426,9 +2426,21 @@ virtio_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
> >>   {
> >>   	uint64_t tso_mask, host_features;
> >>   	struct virtio_hw *hw = dev->data->dev_private;
> >> -
> >> -	dev_info->speed_capa = ETH_LINK_SPEED_10G; /* fake value */
> >> -
> >> +#if RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_LINK_SPEED_20G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_20G;
> >> +#elif RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_SPEED_NUM_25G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_25G;
> >> +#elif RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_SPEED_NUM_40G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_40G;
> >> +#elif RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_SPEED_NUM_50G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_50G;
> >> +#elif RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_SPEED_NUM_56G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_56G;
> >> +#elif RTE_LIBRTE_VIRTIO_LINK_SPEED == ETH_SPEED_NUM_100G
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_100G;
> >> +#else
> >> +	dev_info->speed_capa = ETH_LINK_SPEED_10G;
> >> +#endif
> >>   	dev_info->max_rx_queues =
> >>   		RTE_MIN(hw->max_queue_pairs, VIRTIO_MAX_RX_QUEUES);
> >>   	dev_info->max_tx_queues =
> >>
> > I think we may need toi extend the Virtio specification so that the
> > device can advertise the link speed.
> I agree. It will be more flexible solution, but it will require another 
> effort. I'll evalutate virtio spec and check if it's suitable for such 
> changes.

FYI: https://lists.oasis-open.org/archives/virtio-comment/201911/msg00058.html


> > Problem with your proposal is that it is build time only, so:
> > 1. It won't be configurable when using distros DPDK package.
> > 2. All the Virtio devices on a system will have the same value
> Current implementation is same. Nothing is broken here. :)
> > While any Virtio spec update introduce link speed support, wouldn't it
> > be preferable to have this as a devarg?
> For my case, compile time configuration is ok. Let me prepare solution 
> with devarg then we can choose the better one.
> > Thanks,
> > Maxime
> 
> Best regards,
> 
> Ivan.
>