[dpdk-dev] [PATCH] net/mlx5: add define of LRO segment chunk size

[Dekel Peled]

Maximal size of coalesced LRO segment is set in TIR attributes as
number of chunks of size 256 bytes each.
Current implementation uses the hardcoded value 256 in several places.

This patch adds a definition for this value, and uses this definition
in all relevant places.
A debug message is added to clearly notify the actual configured size.

Signed-off-by: Dekel Peled <dekelp at mellanox.com>
Acked-by: Matan Azrad <matan at mellanox.com>

---
 drivers/net/mlx5/mlx5.h     |  5 ++++-
 drivers/net/mlx5/mlx5_rxq.c | 15 +++++++++++----
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 0c3a90e..c3df825 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -218,8 +218,11 @@ struct mlx5_hca_attr {
 #define MLX5_LRO_SUPPORTED(dev) \
 	(((struct mlx5_priv *)((dev)->data->dev_private))->config.lro.supported)
 
+/* Maximal size of coalesced segment for LRO is set in chunks of 256 Bytes. */
+#define MLX5_LRO_SEG_CHUNK_SIZE	256u
+
 /* Maximal size of aggregated LRO packet. */
-#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
+#define MLX5_MAX_LRO_SIZE (UINT8_MAX * MLX5_LRO_SEG_CHUNK_SIZE)
 
 /* LRO configurations structure. */
 struct mlx5_lro_config {
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 986ec01..bbc07db 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1717,11 +1717,14 @@ struct mlx5_rxq_obj *
  *
  * @param dev
  *   Pointer to Ethernet device.
+ * @param idx
+ *   RX queue index.
  * @param max_lro_size
  *   The maximum size for LRO packet.
  */
 static void
-mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint32_t max_lro_size)
+mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint16_t idx,
+			     uint32_t max_lro_size)
 {
 	struct mlx5_priv *priv = dev->data->dev_private;
 
@@ -1730,13 +1733,17 @@ struct mlx5_rxq_obj *
 	    MLX5_MAX_TCP_HDR_OFFSET)
 		max_lro_size -= MLX5_MAX_TCP_HDR_OFFSET;
 	max_lro_size = RTE_MIN(max_lro_size, MLX5_MAX_LRO_SIZE);
-	assert(max_lro_size >= 256u);
-	max_lro_size /= 256u;
+	assert(max_lro_size >= MLX5_LRO_SEG_CHUNK_SIZE);
+	max_lro_size /= MLX5_LRO_SEG_CHUNK_SIZE;
 	if (priv->max_lro_msg_size)
 		priv->max_lro_msg_size =
 			RTE_MIN((uint32_t)priv->max_lro_msg_size, max_lro_size);
 	else
 		priv->max_lro_msg_size = max_lro_size;
+	DRV_LOG(DEBUG,
+		"port %u Rx Queue %u max LRO message size adjusted to %u bytes",
+		dev->data->port_id, idx,
+		priv->max_lro_msg_size * MLX5_LRO_SEG_CHUNK_SIZE);
 }
 
 /**
@@ -1909,7 +1916,7 @@ struct mlx5_rxq_ctrl *
 		rte_errno = EINVAL;
 		goto error;
 	}
-	mlx5_max_lro_msg_size_adjust(dev, max_lro_size);
+	mlx5_max_lro_msg_size_adjust(dev, idx, max_lro_size);
 	/* Toggle RX checksum offload if hardware supports it. */
 	tmpl->rxq.csum = !!(offloads & DEV_RX_OFFLOAD_CHECKSUM);
 	tmpl->rxq.hw_timestamp = !!(offloads & DEV_RX_OFFLOAD_TIMESTAMP);
-- 
1.8.3.1