[dpdk-dev] [PATCH v2 1/3] eal/arm64: relax the io barrier for aarch64

[Gavin Hu]

Hi Jerin,

Thanks for review, inline comments, 

> -----Original Message-----
> From: Jerin Jacob <jerinjacobk at gmail.com>
> Sent: Friday, December 20, 2019 11:38 AM
> To: Gavin Hu <Gavin.Hu at arm.com>
> Cc: dpdk-dev <dev at dpdk.org>; nd <nd at arm.com>; David Marchand
> <david.marchand at redhat.com>; thomas at monjalon.net;
> rasland at mellanox.com; maxime.coquelin at redhat.com;
> tiwei.bie at intel.com; hemant.agrawal at nxp.com; jerinj at marvell.com;
> Pavan Nikhilesh <pbhagavatula at marvell.com>; Honnappa Nagarahalli
> <Honnappa.Nagarahalli at arm.com>; Ruifeng Wang
> <Ruifeng.Wang at arm.com>; Phil Yang <Phil.Yang at arm.com>; Joyce Kong
> <Joyce.Kong at arm.com>; Steve Capper <Steve.Capper at arm.com>
> Subject: Re: [dpdk-dev] [PATCH v2 1/3] eal/arm64: relax the io barrier for
> aarch64
> 
> On Fri, Dec 20, 2019 at 9:03 AM Jerin Jacob <jerinjacobk at gmail.com>
> wrote:
> >
> > On Fri, Dec 20, 2019 at 8:40 AM Gavin Hu <gavin.hu at arm.com> wrote:
> > >
> > > Armv8's peripheral coherence order is a total order on all reads and
> writes
> > > to that peripheral.[1]
> > >
> > > The peripheral coherence order for a memory-mapped peripheral
> signifies the
> > > order in which accesses arrive at the endpoint.  For a read or a write
> RW1
> > > and a read or a write RW2 to the same peripheral, then RW1 will appear
> in
> > > the peripheral coherence order for the peripheral before RW2 if either
> of
> > > the following cases apply:
> > >  1. RW1 and RW2 are accesses using Non-cacheable or Device attributes
> and
> > >     RW1 is Ordered-before RW2.
> > >  2. RW1 and RW2 are accesses using Device-nGnRE or Device-nGnRnE
> attributes
> > >     and RW1 appears in program order before RW2.
> >
> >
> > This is true if RW1 and RW2 addresses are device memory. i.e the
> > registers in the  PCI bar address.
> > If RW1 is DDR address which is been used by the controller(say NIC
> > ring descriptor) then there will be an issue.
> > For example Intel i40e driver, the admin queue update in Host DDR
> > memory and it updates the doorbell.
> > In such a case, this patch will create an issue. Correct? Have you
> > checked this patch with ARM64 + XL710 controllers?

This patch relaxes the rte_io_*mb barriers for pure PCI device memory accesses.

For mixed accesses of DDR and PCI device memory, rte_smp_*mb(DMB ISH) is not sufficient.
But rte_cio_*mb(DMB OSH) is sufficient and can be used.

> >
> > Some of the legacy code is missing such barriers, that's the reason
> > for adding rte_io_* barrier.
> 
> 
> More details:
> 
> https://dev.dpdk.narkive.com/DpIRqDuy/dpdk-dev-patch-v2-i40e-fix-eth-
> i40e-dev-init-sequence-on-thunderx
> 
> >
> > >
> > > On arm platforms, all the PCI resources are mapped to nGnRE device
> memory
> > > [2], the above case 2 holds true, that means the peripheral coherence
> order
> > > applies here and just a compiler barrier is sufficient for rte io barriers.
> > >
> > > [1] Section B2.3.4 of ARMARM,
> https://developer.arm.com/docs/ddi0487/lates
> > > t/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-
> profile
> > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
> > > tree/drivers/pci/pci-sysfs.c#n1204
> > >
> > > Signed-off-by: Gavin Hu <gavin.hu at arm.com>
> > > Reviewed-by: Steve Capper <steve.capper at arm.com>
> > > Reviewed-by: Phil Yang <phil.yang at arm.com>
> > > ---
> > >  lib/librte_eal/common/include/arch/arm/rte_atomic_64.h | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
> b/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
> > > index 859ae12..fd63956 100644
> > > --- a/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
> > > +++ b/lib/librte_eal/common/include/arch/arm/rte_atomic_64.h
> > > @@ -34,11 +34,11 @@ extern "C" {
> > >
> > >  #define rte_smp_rmb() dmb(ishld)
> > >
> > > -#define rte_io_mb() rte_mb()
> > > +#define rte_io_mb() rte_compiler_barrier()
> > >
> > > -#define rte_io_wmb() rte_wmb()
> > > +#define rte_io_wmb() rte_compiler_barrier()
> > >
> > > -#define rte_io_rmb() rte_rmb()
> > > +#define rte_io_rmb() rte_compiler_barrier()
> > >
> > >  #define rte_cio_wmb() dmb(oshst)
> > >
> > > --
> > > 2.7.4
> > >