[dpdk-dev] [PATCH v3 2/2] ci: Introduce travis builds for github repositories
Honnappa Nagarahalli
Honnappa.Nagarahalli at arm.com
Wed Feb 6 20:17:37 CET 2019
Hi Michael/Aaron,
Thanks for adding the Arm build. I have few comments inline.
> -----Original Message-----
> From: Michael Santana <msantana at redhat.com>
> Sent: Friday, February 1, 2019 10:48 AM
> To: dev at dpdk.org
> Cc: Aaron Conole <aconole at redhat.com>; Bruce Richardson
> <bruce.richardson at intel.com>; Honnappa Nagarahalli
> <Honnappa.Nagarahalli at arm.com>; thomas at monjalon.net
> Subject: [PATCH v3 2/2] ci: Introduce travis builds for github repositories
>
> GitHub is a service used by developers to store repositories. GitHub provides
> service integrations that allow 3rd party services to access developer
> repositories and perform actions. One of these services is Travis-CI, a simple
> continuous integration platform.
>
> This is a simple initial implementation of a travis build for the DPDK project. It
> doesn't require any changes from individual developers to enable, but will
> allow those developers who opt-in to GitHub and the travis service to get
> automatic builds for every push they make.
>
> Additionally, the travis service will send an email to the test-report list
> informing anyone interested in the automated build (including a result).
>
> Signed-off-by: Aaron Conole <aconole at redhat.com>
> Signed-off-by: Michael Santana <msantana at redhat.com>
> ---
> v3:
> - Renamed ambiguous variable names and comments, including the variable
> KERNEL to DISABLE_KERNEL_MODULES and comment 'source for python' to
> 'Repo for python'
> - Removed duplicate file meson_cross_aarch64_gcc.txt. Used
> arm64_armv8_linuxapp_gcc file instead
>
> .ci/linux-build.sh | 88 +++++++++++++++
> .ci/linux-setup.sh | 31 ++++++
> .travis.yml | 159 ++++++++++++++++++++++++++++
> MAINTAINERS | 7 ++
> doc/guides/contributing/patches.rst | 4 +
> 5 files changed, 289 insertions(+)
> create mode 100755 .ci/linux-build.sh
> create mode 100755 .ci/linux-setup.sh
> create mode 100644 .travis.yml
>
> diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh new file mode 100755 index
> 000000000..7aa90822c
> --- /dev/null
> +++ b/.ci/linux-build.sh
> @@ -0,0 +1,88 @@
> +#!/bin/bash
> +
> +# check for whether we're clang or gcc
> +# setup the right options depending on the environment variables # run
> +the build
> +
> +# Just used for the 'classic' configuration system (ie: make)
> +set_conf() {
> + echo "[BUILT WITH $2 SET TO $3]"
> + c="$1/.config"
> + shift
> +
> + if grep -q "$1" "$c"; then
> + sed -i "s:^$1=.*$:$1=$2:g" $c
> + else
> + echo $1=$2 >> "$c"
> + fi
> +}
> +
> +BUILD_ARCH="x86_64-native-linuxapp-"
> +
> +if [ "${ARM64}" == "1" ]; then
Would be good to change the variable names from ARM64 to 'AARCH64...'
> + # convert the arch specifier
> + BUILD_ARCH="arm64-armv8a-linuxapp-"
> + ARM64_TOOL="linaro-arm-tool"
> + export PATH=$PATH:$(pwd)/${ARM64_TOOL}/bin
> +fi
> +
> +
> +if [ "${NINJABUILD}" == "1" ]; then
> + OPTS=""
> +
> + DEF_LIB="static"
> + if [ "${SHARED}" == "1" ]; then
> + DEF_LIB="shared"
> + fi
> +
> + if [ "${DISABLE_KERNEL_MODULES}" == "1" ]; then
> + OPTS="-Denable_kmods=false"
> + fi
> +
> + if [ "${ARM64}" == "1" ]; then
> + OPTS="${OPTS} --cross-file config/arm/arm64_armv8_linuxapp_gcc"
> + fi
> +
> + OPTS="$OPTS --default-library=$DEF_LIB"
> + meson build --werror -Dexamples=all ${OPTS}
> + ninja -C build
> +else
> + EXTRA_OPTS=""
> +
> + make config T="${BUILD_ARCH}${CC}"
> +
> + set_conf build CONFIG_RTE_KNI_KMOD n
> + set_conf build CONFIG_RTE_EAL_IGB_UIO n
> +
> + if dpkg --list | grep -q zlib1g ; then
> + set_conf build CONFIG_RTE_LIBRTE_PMD_ZLIB y
> + fi
> +
> + if dpkg --list | grep -q libpcap-dev ; then
> + set_conf build CONFIG_RTE_PORT_PCAP y
> + fi
> +
> + if [ "${SHARED}" == "1" ]; then
> + set_conf build CONFIG_RTE_BUILD_SHARED_LIB y
> + fi
> +
> + if [ "${DISABLE_KERNEL_MODULES}" == "1" ]; then
> + echo Unsupported kernel builds at the moment
> + fi
> +
> + if [ "${ARM64}" == "1" ]; then
> + EXTRA_OPTS="CROSS=aarch64-linux-gnu-"
> +
> + # need to turn off these extras
> + set_conf build CONFIG_RTE_PORT_PCAP n
> + set_conf build CONFIG_RTE_LIBRTE_PMD_ZLIB n
> +
> + # convert the CC/CXX variables
> + export CC=aarch64-linux-gnu-${CC}
> + export CXX=aarch64-linux-gnu-${CXX}
> + export AR=aarch64-linux-gnu-ar
> + export STRIP=aarch64-linux-gnu-strip
> + fi
> +
> + make all ${EXTRA_OPTS}
> +fi
> diff --git a/.ci/linux-setup.sh b/.ci/linux-setup.sh new file mode 100755 index
> 000000000..7d6478ef9
> --- /dev/null
> +++ b/.ci/linux-setup.sh
> @@ -0,0 +1,31 @@
> +#!/bin/bash
> +
> +python3.5 -m pip install --upgrade meson --user
> +
> +echo "ARM64 is [ ${ARM64} ]"
> +
> +if [ "${ARM64}" == "1" ]; then
> + # need to build & install libnuma
> + # This will only be minimal support for now.
> +
> ARM64_TOOL_URL='https://releases.linaro.org/components/toolchain/binari
> es/latest-7/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-
> linux-gnu.tar.xz'
> + ARM64_TOOL="linaro-arm-tool"
> + NUMA_GIT_URL="https://github.com/numactl/numactl.git"
> +
> + wget -O "${ARM64_TOOL}.tar.xz" "${ARM64_TOOL_URL}"
> + tar -xf "${ARM64_TOOL}.tar.xz"
> + mv gcc-linaro* "${ARM64_TOOL}"
> + export PATH=$PATH:$(pwd)/${ARM64_TOOL}/bin
> + git clone "${NUMA_GIT_URL}"
> + cd numactl
> + git checkout v2.0.11
> + ./autogen.sh
> + autoconf -i
> + mkdir numa_bin
> + ./configure --host=aarch64-linux-gnu CC=aarch64-linux-gnu-gcc \
> + --prefix=$(pwd)/numa_bin
> + make install # install numa
> + cd ..
> + cp numactl/numa_bin/include/numa*.h "${ARM64_TOOL}/aarch64-linux-
> gnu/libc/usr/include/"
> + cp numactl/numa_bin/lib/libnuma.* "${ARM64_TOOL}/aarch64-linux-
> gnu/lib64/"
> + cp numactl/numa_bin/lib/libnuma.* "${ARM64_TOOL}/lib/"
> +fi
> diff --git a/.travis.yml b/.travis.yml
> new file mode 100644
> index 000000000..afd63aa33
> --- /dev/null
> +++ b/.travis.yml
> @@ -0,0 +1,159 @@
> +language: c
> +compiler:
> + - gcc
> + - clang
> +
> +os:
> + - linux
> +
> +addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> +
> +before_install: ./.ci/${TRAVIS_OS_NAME}-setup.sh
> +
> +sudo: false
> +
> +env:
> + - SHARED=1
> + - DISABLE_KERNEL_MODULES=1
> + - SHARED=1 DISABLE_KERNEL_MODULES=1
> + - NINJABUILD=1
> + - NINJABUILD=1 SHARED=1
> + - NINJABUILD=1 DISABLE_KERNEL_MODULES=1
> + - NINJABUILD=1 SHARED=1 DISABLE_KERNEL_MODULES=1
My understanding is we need to list 'ARM64=1' and 'ARM64=1 NINJABUILD=1' here.
> +
> +matrix:
> + include:
> + - env: SHARED=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: DISABLE_KERNEL_MODULES=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: SHARED=1 DISABLE_KERNEL_MODULES=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: SHARED=1
> + compiler: clang
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: DISABLE_KERNEL_MODULES=1
> + compiler: clang
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: SHARED=1 DISABLE_KERNEL_MODULES=1
> + compiler: clang
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: ARM64=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), libtool,
> +python3.5, python3-pip]
> + - env: ARM64=1 NINJABUILD=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [linux-headers-$(uname -r), libtool, python3.5,
> +python3-pip, ninja-build]
> + - env: NINJABUILD=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: NINJABUILD=1 SHARED=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: NINJABUILD=1 DISABLE_KERNEL_MODULES=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> + - env: NINJABUILD=1 SHARED=1 DISABLE_KERNEL_MODULES=1
> + compiler: gcc
> + addons:
> + apt:
> + sources:
> + - deadsnakes #Repo for python 3.5
> + - sourceline: 'ppa:mstipicevic/ninja-build-1-7-2'
> + packages:
> + - [libbsd-dev, libpcap-dev, libcrypto++-dev, libjansson4]
> + - [libnuma-dev, linux-headers-$(uname -r), python3.5,
> +python3-pip, ninja-build]
> +
> +
> +script: ./.ci/${TRAVIS_OS_NAME}-build.sh
> +
> +notifications:
> + email:
> + recipients:
> + - test-report at dpdk.org
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 835d8a201..eed6f69d3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -119,6 +119,13 @@ F: config/rte_config.h
> F: buildtools/gen-pmdinfo-cfile.sh
> F: buildtools/symlink-drivers-solibs.sh
>
> +Public CI
> +M: Aaron Conole <aconole at redhat.com>
> +M: Michael Santana <msantana at redhat.com>
> +F: .travis.yml
> +F: .ci/
> +F: meson_cross_aarch64_gcc.txt
Not required
> +
> ABI versioning
> M: Neil Horman <nhorman at tuxdriver.com>
> F: lib/librte_compat/
> diff --git a/doc/guides/contributing/patches.rst
> b/doc/guides/contributing/patches.rst
> index a64bb0368..49e930cbb 100644
> --- a/doc/guides/contributing/patches.rst
> +++ b/doc/guides/contributing/patches.rst
> @@ -32,6 +32,10 @@ The mailing list for DPDK development is
> `dev at dpdk.org <http://mails.dpdk.org/ar Contributors will need to `register
> for the mailing list <http://mails.dpdk.org/listinfo/dev>`_ in order to submit
> patches.
> It is also worth registering for the DPDK `Patchwork
> <http://patches.dpdk.org/project/dpdk/list/>`_
>
> +If you are using the GitHub service, you can link your repository to
> +the ``travis-ci.org`` build service. When you push patches to your
> +GitHub repository, the travis service will automatically build your changes.
> +
> The development process requires some familiarity with the ``git`` version
> control system.
> Refer to the `Pro Git Book <http://www.git-scm.com/book/>`_ for further
> information.
>
> --
> 2.20.1
More information about the dev
mailing list