[dpdk-dev] [RFC] ethdev: add min/max MTU to device info

[Ian Stokes]

On 2/7/2019 12:00 PM, Ananyev, Konstantin wrote:
> 
>>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Ananyev,
>>> Konstantin
>>>>
>>>>> From: dev on behalf of Stephen Hemminger
>>>>> On Wed, 6 Feb 2019 14:05:34 +0100
>>>>> Morten Brørup <mb at smartsharesystems.com> wrote:
>>>>>
>>>>>> Good work, Stephen.
>>>>>>
>>>>>> It should also be documented how PMDs should interpret this MTU.
>>>>>>
>>>>>> Obviously, a VLAN tagged Ethernet frame grows from 1518 to 1522
>>> bytes incl. header and CRC, and should be allowed with an Ethernet
>>>> MTU of 1500 bytes. There's even a #define ETHER_MAX_VLAN_FRAME_LEN
>>> for this, but that's as far as it goes...
>>>>>>
>>>>>> But how about frames with even larger headers, e.g. 4 MPLS labels
>>> makes a frame 16 bytes longer, i.e. it grows from 1518 to 1534
>>>> bytes... is such a frame acceptable with an MTU of 1500 bytes?
>>>>>
>>>>> No. According to standard practice in Linux and FreeBSD, only the
>>> first VLAN tag is free.
>>>>> After that any other headers count against MTU.
>>>>
>>>> Thank you for the insights. Just to clarify:
>>>> 1 VLAN tag is allowed for free.
>>>> But on order to support two VLAN tags, the MTU must be increased by
>>> the size of one VLAN tag, because the first VLAN tag is free?
>>>> Or must the MTU be increased by the size of two VLAN tags, because
>>> only the special case of exactly one VLAN tag is free?
>>>
>>> Can we introduce new function at ehtdev API to query PMD frame size
>>> based on MTU?
>>> Something like: rte_ethdev_mtu_to_frame_size(uint32_t mtu);
>>> Provide default behavior and allow PMD to overwrite it?
>>> Konstantin
>>
>> This assumes that the Layer 2 headers are fixed size. If you add e.g. an MPLS stack to the packet, the number of MPLS labels can vary, and
>> thus the size of the Layer 2 headers varies with each packet.
> 
> If all this extra stuff (MPLS labels, etc.) is added by SW - then yes, it will be SW (upper layer) to take account about such overhead
> and it would be accounted by PMD frame-size caluclation.
> If these fields would be added by HW/PMD - then it would be PMD responsibility to take these extras into account when calculating
> frame size.
> 
>>
>> It is a problem if Layer 3/4 offload features make assumptions about the Layer 3/4 MTUs based on the Layer 2 MTU without considering the
>> size of the actual Ethernet headers of each packet, but simply assume that the Ethernet header size is fixed.
>>
>> It might currently be calculated correctly for untagged or single VLAN tagged packets (assuming the VLAN tag is not already part of the
>> packet data, but is set in the mbuf for the NIC to add).
> 
> That could be a default behavior for that function.
> Konstantin
> 

Hi All,

with a view to help progress this I've posted an RFC series based on 
Stephens work and some of the PMD drivers

http://mails.dpdk.org/archives/dev/2019-February/124938.html

Any feedback welcome

Thanks
Ian