[dpdk-dev] [PATCH] net/ixgbe: add support of loopback for X540/X550

Julien Meunier julien.meunier at nokia.com
Wed Jan 2 17:00:55 CET 2019


Loopback mode is also supported on X540 and X550 NICs, according to
their datasheet (section 15.2). The way to set it up is a little
different of the 82599.

Signed-off-by: Julien Meunier <julien.meunier at nokia.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 10 ++++++---
 drivers/net/ixgbe/ixgbe_ethdev.h |  5 ++---
 drivers/net/ixgbe/ixgbe_rxtx.c   | 47 ++++++++++++++++++++++++++++++++++------
 3 files changed, 49 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 7493110..7eb3303 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2652,9 +2652,13 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 		goto error;
 	}
 
-	/* Skip link setup if loopback mode is enabled for 82599. */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+	/* Skip link setup if loopback mode is enabled. */
+	if ((hw->mac.type == ixgbe_mac_82599EB ||
+	     hw->mac.type == ixgbe_mac_X540 ||
+	     hw->mac.type == ixgbe_mac_X550 ||
+	     hw->mac.type == ixgbe_mac_X550EM_x ||
+	     hw->mac.type == ixgbe_mac_X550EM_a) &&
+			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
 		goto skip_link_setup;
 
 	if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 565c69c..c60a697 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -65,9 +65,8 @@
 #define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT	500 /* 500us */
 
 /* Loopback operation modes */
-/* 82599 specific loopback operation types */
-#define IXGBE_LPBK_82599_NONE   0x0 /* Default value. Loopback is disabled. */
-#define IXGBE_LPBK_82599_TX_RX  0x1 /* Tx->Rx loopback operation is enabled. */
+#define IXGBE_LPBK_NONE   0x0 /* Default value. Loopback is disabled. */
+#define IXGBE_LPBK_TX_RX  0x1 /* Tx->Rx loopback operation is enabled. */
 
 #define IXGBE_MAX_JUMBO_FRAME_SIZE      0x2600 /* Maximum Jumbo frame size. */
 
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 9a79d18..0ef7fdf 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -4879,10 +4879,14 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
 
 	/*
-	 * If loopback mode is configured for 82599, set LPBK bit.
+	 * If loopback mode is configured, set LPBK bit.
 	 */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+	if ((hw->mac.type == ixgbe_mac_82599EB ||
+	     hw->mac.type == ixgbe_mac_X540 ||
+	     hw->mac.type == ixgbe_mac_X550 ||
+	     hw->mac.type == ixgbe_mac_X550EM_x ||
+	     hw->mac.type == ixgbe_mac_X550EM_a) &&
+			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
 		hlreg0 |= IXGBE_HLREG0_LPBK;
 	else
 		hlreg0 &= ~IXGBE_HLREG0_LPBK;
@@ -5088,6 +5092,29 @@ ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
 	msec_delay(50);
 }
 
+/*
+ * Set up link loopback for X540 / X550 mode Tx->Rx.
+ */
+static inline void __attribute__((cold))
+ixgbe_setup_loopback_link_x540_x550(struct ixgbe_hw *hw)
+{
+	uint32_t macc;
+	PMD_INIT_FUNC_TRACE();
+
+	/* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
+	macc = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc |= IXGBE_MACC_FLU;
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc);
+
+	/* Restart link */
+	IXGBE_WRITE_REG(hw,
+			IXGBE_AUTOC,
+			IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+	msec_delay(50);
+}
+
 
 /*
  * Start Transmit and Receive Units.
@@ -5148,10 +5175,16 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 	rxctrl |= IXGBE_RXCTRL_RXEN;
 	hw->mac.ops.enable_rx_dma(hw, rxctrl);
 
-	/* If loopback mode is enabled for 82599, set up the link accordingly */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
-		ixgbe_setup_loopback_link_82599(hw);
+	/* If loopback mode is enabled, set up the link accordingly */
+	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX) {
+		if (hw->mac.type == ixgbe_mac_82599EB)
+			ixgbe_setup_loopback_link_82599(hw);
+		else if (hw->mac.type == ixgbe_mac_X540 ||
+		     hw->mac.type == ixgbe_mac_X550 ||
+		     hw->mac.type == ixgbe_mac_X550EM_x ||
+		     hw->mac.type == ixgbe_mac_X550EM_a)
+			ixgbe_setup_loopback_link_x540_x550(hw);
+	}
 
 #ifdef RTE_LIBRTE_SECURITY
 	if ((dev->data->dev_conf.rxmode.offloads &
-- 
2.10.2



More information about the dev mailing list