[dpdk-dev] [PATCH v8 10/10] doc: update ipsec-secgw guide and relelase notes
Varghese, Vipin
vipin.varghese at intel.com
Fri Jan 11 03:49:46 CET 2019
Hi Konstantin,
As per 19.02-rc1, documentation has to be updated along with the code base.
snipped
> --- a/doc/guides/rel_notes/release_19_02.rst
> +++ b/doc/guides/rel_notes/release_19_02.rst
> @@ -133,6 +133,20 @@ New Features
>
> See :doc:`../prog_guide/ipsec_lib` for more information.
>
> +* **Updated the ipsec-secgw sample application.**
> +
> + The ``ipsec-secgw`` sample application has been updated to use the
> + new ``librte_ipsec`` library also added in this release.
> + The original functionality of ipsec-secgw is retained, a new command
> + line parameter ``-l`` has been added to ipsec-secgw to use the IPsec
> + library, instead of the existing IPsec code in the application.
> +
> + The IPsec library does not support all the functionality of the
> + existing ipsec-secgw application, its is planned to add the
> + outstanding functionality in future releases.
> +
> + See :doc:`../sample_app_ug/ipsec_secgw` for more information.
> +
>
In my opinion this can come in the first patch
snipped
> #. [Optional] Build the application for debugging:
> This option adds some extra flags, disables compiler optimizations and @@ -
> 93,6 +93,7 @@ The application has a number of command line options::
>
> ./build/ipsec-secgw [EAL options] --
> -p PORTMASK -P -u PORTMASK -j FRAMESIZE
> + -l -w REPLAY_WINOW_SIZE -e -a
This can be added patch which adds the option
> --config (port,queue,lcore)[,(port,queue,lcore]
> --single-sa SAIDX
> --rxoffload MASK @@ -114,6 +115,18 @@ Where:
> specified as FRAMESIZE. If an invalid value is provided as FRAMESIZE
> then the default value 9000 is used.
>
> +* ``-l``: enables code-path that uses librte_ipsec.
> +
> +* ``-w REPLAY_WINOW_SIZE``: specifies the IPsec sequence number replay
> window
> + size for each Security Association (available only with librte_ipsec
> + code path).
> +
> +* ``-e``: enables Security Association extended sequence number processing
> + (available only with librte_ipsec code path).
> +
> +* ``-a``: enables Security Association sequence number atomic behaviour
> + (available only with librte_ipsec code path).
> +
> * ``--config (port,queue,lcore)[,(port,queue,lcore)]``: determines which
> queues
> from which ports are mapped to which cores.
>
> @@ -225,7 +238,7 @@ accordingly.
>
>
> Configuration File Syntax
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +~~~~~~~~~~~~~~~~~~~~~~~~~
>
> As mention in the overview, the Security Policies are ACL rules.
> The application parsers the rules specified in the configuration file and @@ -
> 571,6 +584,11 @@ Example SA rules:
> mode ipv4-tunnel src 172.16.1.5 dst 172.16.2.5 \
> type lookaside-protocol-offload port_id 4
>
> + sa in 35 aead_algo aes-128-gcm \
> + aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
> + mode ipv4-tunnel src 172.16.2.5 dst 172.16.1.5 \
> + type inline-crypto-offload port_id 0
> +
> Routing rule syntax
> ^^^^^^^^^^^^^^^^^^^
>
> @@ -667,3 +685,86 @@ Example Neighbour rules:
> .. code-block:: console
>
> neigh port 0 DE:AD:BE:EF:01:02
> +
> +Test directory
> +--------------
> +
> +The test directory contains scripts for testing the various encryption
> +algorithms.
> +
> +The purpose of the scripts is to automate ipsec-secgw testing using
> +another system running linux as a DUT.
> +
> +The user must setup the following environment variables:
> +
> +* ``SGW_PATH``: path to the ipsec-secgw binary to test.
> +
> +* ``REMOTE_HOST``: IP address/hostname of the DUT.
> +
> +* ``REMOTE_IFACE``: interface name for the test-port on the DUT.
> +
> +* ``ETH_DEV``: ethernet device to be used on the SUT by DPDK ('-w <pci-id>')
> +
> +Also the user can optionally setup:
> +
> +* ``SGW_LCORE``: lcore to run ipsec-secgw on (default value is 0)
> +
> +* ``CRYPTO_DEV``: crypto device to be used ('-w <pci-id>'). If none specified
> + appropriate vdevs will be created by the script
> +
> +Note that most of the tests require the appropriate crypto PMD/device
> +to be available.
> +
> +Server configuration
> +~~~~~~~~~~~~~~~~~~~~
> +
> +Two servers are required for the tests, SUT and DUT.
> +
> +Make sure the user from the SUT can ssh to the DUT without entering the
> password.
> +To enable this feature keys must be setup on the DUT.
> +
> +``ssh-keygen`` will make a private & public key pair on the SUT.
> +
> +``ssh-copy-id`` <user name>@<target host name> on the SUT will copy the
> +public key to the DUT. It will ask for credentials so that it can upload the
> public key.
> +
> +The SUT and DUT are connected through at least 2 NIC ports.
> +
> +One NIC port is expected to be managed by linux on both machines and
> +will be used as a control path.
> +
> +The second NIC port (test-port) should be bound to DPDK on the SUT, and
> +should be managed by linux on the DUT.
> +
> +The script starts ``ipsec-secgw`` with 2 NIC devices: ``test-port`` and
> +``tap vdev``.
> +
> +It then configures the local tap interface and the remote interface and
> +IPsec policies in the following way:
> +
> +Traffic going over the test-port in both directions has to be protected by
> IPsec.
> +
> +Traffic going over the TAP port in both directions does not have to be
> protected.
> +
> +i.e:
> +
> +DUT OS(NIC1)--(IPsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
> +
> +SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(IPsec)-->(NIC1)DUT OS
> +
> +It then tries to perform some data transfer using the scheme decribed above.
> +
> +usage
> +~~~~~
> +
> +In the ipsec-secgw/test directory
> +
> +to run one test for IPv4 or IPv6
> +
> +/bin/bash linux_test(4|6).sh <ipsec_mode>
> +
> +to run all tests for IPv4 or IPv6
> +
> +/bin/bash run_test.sh -4|-6
> +
> +For the list of available modes please refer to run_test.sh.
> --
> 2.17.1
More information about the dev
mailing list