[dpdk-dev] [EXT] [PATCH 32/39] eventdev: add routine to launch eventmode workers

Sunil Kumar Kori skori at marvell.com
Tue Jun 11 10:58:20 CEST 2019



Regards
Sunil Kumar Kori

>-----Original Message-----
>From: dev <dev-bounces at dpdk.org> On Behalf Of Anoob Joseph
>Sent: Monday, June 3, 2019 11:03 PM
>To: Jerin Jacob Kollanukkaran <jerinj at marvell.com>; Nikhil Rao
><nikhil.rao at intel.com>; Erik Gabriel Carrillo <erik.g.carrillo at intel.com>;
>Abhinandan Gujjar <abhinandan.gujjar at intel.com>; Bruce Richardson
><bruce.richardson at intel.com>; Pablo de Lara
><pablo.de.lara.guarch at intel.com>
>Cc: Anoob Joseph <anoobj at marvell.com>; Narayana Prasad Raju Athreya
><pathreya at marvell.com>; dev at dpdk.org; Lukas Bartosik
><lbartosik at marvell.com>; Pavan Nikhilesh Bhagavatula
><pbhagavatula at marvell.com>; Hemant Agrawal
><hemant.agrawal at nxp.com>; Nipun Gupta <nipun.gupta at nxp.com>; Harry
>van Haaren <harry.van.haaren at intel.com>; Mattias Rönnblom
><mattias.ronnblom at ericsson.com>; Liang Ma <liang.j.ma at intel.com>
>Subject: [EXT] [dpdk-dev] [PATCH 32/39] eventdev: add routine to launch
>eventmode workers
>
>External Email
>
>----------------------------------------------------------------------
>With eventmode, workers could be drafted differently according to the
>capabilities of the underlying event device. The added function would receive
>an array of such workers and probes the eventmode properties to choose the
>worker.
>
>Signed-off-by: Anoob Joseph <anoobj at marvell.com>
>Signed-off-by: Lukasz Bartosik <lbartosik at marvell.com>
>---
> lib/librte_eventdev/rte_eventdev_version.map       |   1 +
> lib/librte_eventdev/rte_eventmode_helper.c         | 240
>+++++++++++++++++++++
> lib/librte_eventdev/rte_eventmode_helper.h         |  49 +++++
> .../rte_eventmode_helper_internal.h                |   3 +
> 4 files changed, 293 insertions(+)
>
>diff --git a/lib/librte_eventdev/rte_eventdev_version.map
>b/lib/librte_eventdev/rte_eventdev_version.map
>index 3cf926a..665836e 100644
>--- a/lib/librte_eventdev/rte_eventdev_version.map
>+++ b/lib/librte_eventdev/rte_eventdev_version.map
>@@ -135,4 +135,5 @@ EXPERIMENTAL {
> 	rte_eventmode_helper_display_conf;
> 	rte_eventmode_helper_get_event_lcore_links;
> 	rte_eventmode_helper_get_tx_queue;
>+	rte_eventmode_helper_launch_worker;
> };
>diff --git a/lib/librte_eventdev/rte_eventmode_helper.c
>b/lib/librte_eventdev/rte_eventmode_helper.c
>index e7670e0..77a5a4e 100644
>--- a/lib/librte_eventdev/rte_eventmode_helper.c
>+++ b/lib/librte_eventdev/rte_eventmode_helper.c
>@@ -2,6 +2,7 @@
>  * Copyright (C) 2019 Marvell International Ltd.
>  */
> #include <getopt.h>
>+#include <stdbool.h>
>
> #include <rte_ethdev.h>
> #include <rte_eventdev.h>
>@@ -13,6 +14,8 @@
>
> #define CMD_LINE_OPT_TRANSFER_MODE	"transfer-mode"
>
>+static volatile bool eth_core_running;
>+
> static const char short_options[] =
> 	""
> 	;
>@@ -111,6 +114,16 @@ internal_get_eventdev_params(struct
>eventmode_conf *em_conf,
> 	return &(em_conf->eventdev_config[i]);  }
>
>+static inline bool
>+internal_dev_has_burst_mode(uint8_t dev_id) {
>+	struct rte_event_dev_info dev_info;
>+
>+	rte_event_dev_info_get(dev_id, &dev_info);
>+	return (dev_info.event_dev_cap &
>RTE_EVENT_DEV_CAP_BURST_MODE) ?
>+			true : false;
>+}
>+
> /* Global functions */
>
> void __rte_experimental
>@@ -980,3 +993,230 @@ rte_eventmode_helper_get_tx_queue(struct
>rte_eventmode_helper_conf *mode_conf,
> 	return eventdev_config->nb_eventqueue - 1;  }
>
>+/* Helper functions for launching workers */
>+
>+static int32_t
>+rte_eventmode_helper_start_worker_eth_core(struct eventmode_conf
>*em_conf,
>+		uint32_t lcore_id)

Internal functions must not be prefixed with "rte_",

>+{
>+	uint32_t service_id[EVENT_MODE_MAX_ADAPTERS_PER_RX_CORE];
>+	struct rx_adapter_conf *rx_adapter;
>+	int service_count = 0;
>+	int adapter_id;
>+	int32_t ret;
>+	int i;
>+
>+	RTE_EM_HLPR_LOG_INFO(
>+		"Entering eth_core processing on lcore %u", lcore_id);
>+
>+	/*
>+	 * Need to parse adapter conf to see which of all Rx adapters need
>+	 * to be handled by this core.
>+	 */
>+	for (i = 0; i < em_conf->nb_rx_adapter; i++) {
>+		/* Check if we have exceeded the max allowed */
>+		if (service_count >
>EVENT_MODE_MAX_ADAPTERS_PER_RX_CORE) {
>+			RTE_EM_HLPR_LOG_ERR(
>+				"Exceeded the max allowed adapters per rx
>core");
>+			break;
>+		}
>+
>+		rx_adapter = &(em_conf->rx_adapter[i]);
>+		if (rx_adapter->rx_core_id != lcore_id)
>+			continue;
>+
>+		/* Adapter need to be handled by this core */
>+		adapter_id = rx_adapter->adapter_id;
>+
>+		/* Get the service ID for the adapters */
>+		ret = rte_event_eth_rx_adapter_service_id_get(adapter_id,
>+				&(service_id[service_count]));
>+
>+		if (ret != -ESRCH && ret != 0) {
>+			RTE_EM_HLPR_LOG_ERR(
>+				"Error getting service ID used by Rx adapter");
>+			return ret;
>+		}
>+
>+		/* Update service count */
>+		service_count++;
>+	}
>+
>+	eth_core_running = true;
>+
>+	while (eth_core_running) {
>+		for (i = 0; i < service_count; i++) {
>+			/* Initiate adapter service */
>+			rte_service_run_iter_on_app_lcore(service_id[i], 0);
>+		}
>+	}
>+
>+	return 0;
>+}
>+
>+static int32_t
>+rte_eventmode_helper_stop_worker_eth_core(void)
>+{
>+	if (eth_core_running) {
>+		RTE_EM_HLPR_LOG_INFO("Stopping rx cores\n");
>+		eth_core_running = false;
>+	}
>+	return 0;
>+}
>+
>+static struct rte_eventmode_helper_app_worker_params *
>+rte_eventmode_helper_find_worker(uint32_t lcore_id,
>+		struct eventmode_conf *em_conf,
>+		struct rte_eventmode_helper_app_worker_params
>*app_wrkrs,
>+		uint8_t nb_wrkr_param)
>+{
>+	struct rte_eventmode_helper_event_link_info *link = NULL;
>+	uint8_t eventdev_id;
>+	struct eventdev_params *eventdev_config;
>+	int i;
>+	struct rte_eventmode_helper_app_worker_params curr_conf = {
>+			{{0} }, NULL};
>+	struct rte_eventmode_helper_app_worker_params *tmp_wrkr;
>+
>+	/*
>+	 * Event device to be used will be derived from the first lcore-event
>+	 * link.
>+	 *
>+	 * Assumption: All lcore-event links tied to a core would be using the
>+	 * same event device. in other words, one core would be polling on
>+	 * queues of a single event device only.
>+	 */
>+
>+	/* Get a link for this lcore */
>+	for (i = 0; i < em_conf->nb_link; i++) {
>+		link = &(em_conf->link[i]);
>+		if (link->lcore_id == lcore_id)
>+			break;
>+	}
>+
>+	if (link == NULL) {
>+		RTE_EM_HLPR_LOG_ERR(
>+			"No valid link found for lcore(%d)", lcore_id);
>+		return NULL;
>+	}
>+
>+	/* Get event dev ID */
>+	eventdev_id = link->eventdev_id;
>+
>+	/* Get the corresponding eventdev config */
>+	eventdev_config = internal_get_eventdev_params(em_conf,
>eventdev_id);
>+
>+	/* Populate the curr_conf with the capabilities */
>+
>+	/* Check for burst mode */
>+	if (internal_dev_has_burst_mode(eventdev_id))
>+		curr_conf.cap.burst =
>RTE_EVENTMODE_HELPER_RX_TYPE_BURST;
>+	else
>+		curr_conf.cap.burst =
>RTE_EVENTMODE_HELPER_RX_TYPE_NON_BURST;
>+
>+	/* Now parse the passed list and see if we have matching capabilities
>+*/
>+
>+	/* Initialize the pointer used to traverse the list */
>+	tmp_wrkr = app_wrkrs;
>+
>+	for (i = 0; i < nb_wrkr_param; i++, tmp_wrkr++) {
>+
>+		/* Skip this if capabilities are not matching */
>+		if (tmp_wrkr->cap.u64 != curr_conf.cap.u64)
>+			continue;
>+
>+		/* If the checks pass, we have a match */
>+		return tmp_wrkr;
>+	}
>+
>+	/* TODO required for ATQ */
>+	RTE_SET_USED(eventdev_config);
>+
>+	return NULL;
>+}
>+
>+static int
>+rte_eventmode_helper_verify_match_worker(
>+	struct rte_eventmode_helper_app_worker_params *match_wrkr) {
>+	/* Verify registered worker */
>+	if (match_wrkr->worker_thread == NULL) {
>+		RTE_EM_HLPR_LOG_ERR("No worker registered for second
>stage");
>+		return 0;
>+	}
>+
>+	/* Success */
>+	return 1;
>+}
>+
>+void __rte_experimental
>+rte_eventmode_helper_launch_worker(struct rte_eventmode_helper_conf
>*mode_conf,
>+		struct rte_eventmode_helper_app_worker_params
>*app_wrkr,
>+		uint8_t nb_wrkr_param)
>+{
>+	struct rte_eventmode_helper_app_worker_params *match_wrkr;
>+	uint32_t lcore_id;
>+	struct eventmode_conf *em_conf;
>+
>+	if (mode_conf == NULL) {
>+		RTE_EM_HLPR_LOG_ERR("Invalid conf");
>+		return;
>+	}
>+
>+	if (mode_conf->mode_params == NULL) {
>+		RTE_EM_HLPR_LOG_ERR("Invalid mode params");
>+		return;
>+	}
>+
>+	/* Get eventmode conf */
>+	em_conf = (struct eventmode_conf *)(mode_conf->mode_params);
>+
>+	/* Get core ID */
>+	lcore_id = rte_lcore_id();
>+
>+	/* TODO check capability for rx core */
>+
>+	/* Check if this is rx core */
>+	if (em_conf->eth_core_mask & (1 << lcore_id)) {
>+		rte_eventmode_helper_start_worker_eth_core(em_conf,
>lcore_id);
>+		return;
>+	}
>+
>+	if (app_wrkr == NULL || nb_wrkr_param == 0) {
>+		RTE_EM_HLPR_LOG_ERR("Invalid args");
>+		return;
>+	}
>+
>+	/*
>+	 * This is a regular worker thread. The application would be
>+	 * registering multiple workers with various capabilities. The
>+	 * worker to be run will be selected by the capabilities of the
>+	 * event device configured.
>+	 */
>+
>+	/* Get the first matching worker for the event device */
>+	match_wrkr = rte_eventmode_helper_find_worker(lcore_id,
>+			em_conf,
>+			app_wrkr,
>+			nb_wrkr_param);
>+
>+	if (match_wrkr == NULL) {
>+		RTE_EM_HLPR_LOG_ERR(
>+			"No matching worker registered for lcore %d",
>lcore_id);
>+		goto clean_and_exit;
>+	}
>+
>+	/* Verify sanity of the matched worker */
>+	if (rte_eventmode_helper_verify_match_worker(match_wrkr) != 1) {
>+		RTE_EM_HLPR_LOG_ERR("Error in validating the matched
>worker");
>+		goto clean_and_exit;
>+	}
>+
>+	/* Launch the worker thread */
>+	match_wrkr->worker_thread(mode_conf);
>+
>+clean_and_exit:
>+
>+	/* Flag eth_cores to stop, if started */
>+	rte_eventmode_helper_stop_worker_eth_core();
>+}
>diff --git a/lib/librte_eventdev/rte_eventmode_helper.h
>b/lib/librte_eventdev/rte_eventmode_helper.h
>index cd6d708..1235ca4 100644
>--- a/lib/librte_eventdev/rte_eventmode_helper.h
>+++ b/lib/librte_eventdev/rte_eventmode_helper.h
>@@ -17,6 +17,20 @@ enum rte_eventmode_helper_pkt_transfer_mode {
> 	RTE_EVENTMODE_HELPER_PKT_TRANSFER_MODE_EVENT,
> };
>
>+/* Event mode packet rx types */
>+enum rte_eventmode_helper_rx_types {
>+	RTE_EVENTMODE_HELPER_RX_TYPE_INVALID = 0,
>+	RTE_EVENTMODE_HELPER_RX_TYPE_NON_BURST,
>+	RTE_EVENTMODE_HELPER_RX_TYPE_BURST,
>+	RTE_EVENTMODE_HELPER_RX_TYPE_MAX = 16
>+};
>+
>+/* Event mode packet tx types */
>+enum rte_eventmode_helper_tx_types {
>+	RTE_EVETNMODE_HELPER_TX_TYPE_INVALID = 0,
>+	RTE_EVENTMODE_HELPER_TX_TYPE_MAX = 16
>+};
>+
> struct rte_eventmode_helper_conf {
> 	enum rte_eventmode_helper_pkt_transfer_mode mode;
> 		/**< Packet transfer mode of the application */ @@ -41,6
>+55,20 @@ struct rte_eventmode_helper_event_link_info {
> 		/**< Lcore to be polling on this port */  };
>
>+/* Workers registered by the application */ struct
>+rte_eventmode_helper_app_worker_params {
>+	union {
>+		struct {
>+			uint64_t burst : 4;
>+			/**< Specify status of rx type burst */
>+		};
>+		uint64_t u64;
>+	} cap;
>+			/**< Capabilities of this worker */
>+	void (*worker_thread)(void *mode_conf);
>+			/**< Worker thread */
>+};
>+
> /* Common helper functions for command line parsing */
>
> /**
>@@ -157,6 +185,27 @@ uint8_t __rte_experimental
>rte_eventmode_helper_get_tx_queue(struct rte_eventmode_helper_conf
>*mode_conf,
> 		uint8_t eventdev_id);
>
>+/**
>+ * Launch eventmode worker
>+ *
>+ * The application can request the eventmode helper subsystem to launch
>+the
>+ * worker based on the capabilities of event device and the options
>+selected
>+ * while initializing the eventmode.
>+ *
>+ * @param mode_conf
>+ *   Configuration of the mode in which app is doing packet handling
>+ * @param app_wrkr
>+ *   List of all the workers registered by application, along with it's
>+ *   capabilities
>+ * @param nb_wrkr_param
>+ *   Number of workers passed by the application
>+ *
>+ */
>+void __rte_experimental
>+rte_eventmode_helper_launch_worker(struct rte_eventmode_helper_conf
>*mode_conf,
>+		struct rte_eventmode_helper_app_worker_params
>*app_wrkr,
>+		uint8_t nb_wrkr_param);
>+
> #ifdef __cplusplus
> }
> #endif
>diff --git a/lib/librte_eventdev/rte_eventmode_helper_internal.h
>b/lib/librte_eventdev/rte_eventmode_helper_internal.h
>index 499cf5d..906766c 100644
>--- a/lib/librte_eventdev/rte_eventmode_helper_internal.h
>+++ b/lib/librte_eventdev/rte_eventmode_helper_internal.h
>@@ -48,6 +48,9 @@
> #define EVENT_MODE_MAX_LCORE_LINKS \
> 	(EVENT_MODE_MAX_EVENT_DEVS *
>EVENT_MODE_MAX_EVENT_QUEUES_PER_DEV)
>
>+/* Max adapters that one Rx core can handle */ #define
>+EVENT_MODE_MAX_ADAPTERS_PER_RX_CORE
>EVENT_MODE_MAX_RX_ADAPTERS
>+
> /* Event dev params */
> struct eventdev_params {
> 	uint8_t eventdev_id;
>--
>2.7.4



More information about the dev mailing list