[dpdk-dev] [PATCH v3 2/3] net/ice: add generic flow API

Wang, Xiao W xiao.w.wang at intel.com
Thu Jun 20 11:32:28 CEST 2019


Hi,

> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Qiming Yang
> Sent: Thursday, June 20, 2019 1:35 PM
> To: dev at dpdk.org
> Cc: Yang, Qiming <qiming.yang at intel.com>
> Subject: [dpdk-dev] [PATCH v3 2/3] net/ice: add generic flow API
> 
> This patch adds ice_flow_create, ice_flow_destroy,
> ice_flow_flush and ice_flow_validate support,
> these are used to handle all the generic filters.
> 
> Signed-off-by: Qiming Yang <qiming.yang at intel.com>
> ---
>  drivers/net/ice/Makefile           |   1 +
>  drivers/net/ice/ice_ethdev.c       |  44 +++
>  drivers/net/ice/ice_ethdev.h       |   5 +
>  drivers/net/ice/ice_generic_flow.c | 682
> +++++++++++++++++++++++++++++++++++++
>  drivers/net/ice/ice_generic_flow.h | 654
> +++++++++++++++++++++++++++++++++++
>  drivers/net/ice/meson.build        |   1 +
>  6 files changed, 1387 insertions(+)
>  create mode 100644 drivers/net/ice/ice_generic_flow.c
>  create mode 100644 drivers/net/ice/ice_generic_flow.h
> 
> diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile
> index b10d826..32abeb6 100644
> --- a/drivers/net/ice/Makefile
> +++ b/drivers/net/ice/Makefile
> @@ -79,5 +79,6 @@ endif
>  ifeq ($(CC_AVX2_SUPPORT), 1)
>  	SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_avx2.c
>  endif
> +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_generic_flow.c
> 
>  include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
> index a94aa7e..8ee06d1 100644
> --- a/drivers/net/ice/ice_ethdev.c
> +++ b/drivers/net/ice/ice_ethdev.c
> @@ -15,6 +15,7 @@
>  #include "base/ice_dcb.h"
>  #include "ice_ethdev.h"
>  #include "ice_rxtx.h"
> +#include "ice_switch_filter.h"
> 
>  #define ICE_MAX_QP_NUM "max_queue_pair_num"
>  #define ICE_DFLT_OUTER_TAG_TYPE ICE_AQ_VSI_OUTER_TAG_VLAN_9100
> @@ -83,6 +84,10 @@ static int ice_xstats_get(struct rte_eth_dev *dev,
>  static int ice_xstats_get_names(struct rte_eth_dev *dev,
>  				struct rte_eth_xstat_name *xstats_names,
>  				unsigned int limit);
> +static int ice_dev_filter_ctrl(struct rte_eth_dev *dev,
> +			enum rte_filter_type filter_type,
> +			enum rte_filter_op filter_op,
> +			void *arg);
> 
>  static const struct rte_pci_id pci_id_ice_map[] = {
>  	{ RTE_PCI_DEVICE(ICE_INTEL_VENDOR_ID,
> ICE_DEV_ID_E810C_BACKPLANE) },
> @@ -141,6 +146,7 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
>  	.xstats_get                   = ice_xstats_get,
>  	.xstats_get_names             = ice_xstats_get_names,
>  	.xstats_reset                 = ice_stats_reset,
> +	.filter_ctrl                  = ice_dev_filter_ctrl,
>  };
> 
>  /* store statistics names and its offset in stats structure */
> @@ -1478,6 +1484,8 @@ ice_dev_init(struct rte_eth_dev *dev)
>  	/* get base queue pairs index  in the device */
>  	ice_base_queue_get(pf);
> 
> +	TAILQ_INIT(&pf->flow_list);
> +
>  	return 0;
> 
>  err_pf_setup:
> @@ -1620,6 +1628,8 @@ ice_dev_uninit(struct rte_eth_dev *dev)
>  {
>  	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
>  	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> +	struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> +	struct rte_flow *p_flow;
> 
>  	ice_dev_close(dev);
> 
> @@ -1637,6 +1647,13 @@ ice_dev_uninit(struct rte_eth_dev *dev)
>  	rte_intr_callback_unregister(intr_handle,
>  				     ice_interrupt_handler, dev);
> 
> +	/* Remove all flows */
> +	while ((p_flow = TAILQ_FIRST(&pf->flow_list))) {
> +		TAILQ_REMOVE(&pf->flow_list, p_flow, node);
> +		ice_free_switch_filter_rule(p_flow->rule);
> +		rte_free(p_flow);
> +	}
> +
>  	return 0;
>  }
> 
> @@ -3622,6 +3639,33 @@ static int ice_xstats_get_names(__rte_unused
> struct rte_eth_dev *dev,
>  }
> 
>  static int
> +ice_dev_filter_ctrl(struct rte_eth_dev *dev,
> +		     enum rte_filter_type filter_type,
> +		     enum rte_filter_op filter_op,
> +		     void *arg)
> +{
> +	int ret = 0;
> +
> +	if (!dev)
> +		return -EINVAL;
> +
> +	switch (filter_type) {
> +	case RTE_ETH_FILTER_GENERIC:
> +		if (filter_op != RTE_ETH_FILTER_GET)
> +			return -EINVAL;
> +		*(const void **)arg = &ice_flow_ops;
> +		break;
> +	default:
> +		PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
> +					filter_type);
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int
>  ice_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
>  	      struct rte_pci_device *pci_dev)
>  {
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
> index 50b966c..8a52239 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -234,12 +234,16 @@ struct ice_vsi {
>  	bool offset_loaded;
>  };
> 
> +extern const struct rte_flow_ops ice_flow_ops;
> +
>  /* Struct to store flow created. */
>  struct rte_flow {
>  	TAILQ_ENTRY(rte_flow) node;
>  	void *rule;
>  };
> 
> +TAILQ_HEAD(ice_flow_list, rte_flow);
> +
>  struct ice_pf {
>  	struct ice_adapter *adapter; /* The adapter this PF associate to */
>  	struct ice_vsi *main_vsi; /* pointer to main VSI structure */
> @@ -266,6 +270,7 @@ struct ice_pf {
>  	struct ice_eth_stats internal_stats;
>  	bool offset_loaded;
>  	bool adapter_stopped;
> +	struct ice_flow_list flow_list;
>  };
> 
>  /**
> diff --git a/drivers/net/ice/ice_generic_flow.c
> b/drivers/net/ice/ice_generic_flow.c
> new file mode 100644
> index 0000000..c6fce88
> --- /dev/null
> +++ b/drivers/net/ice/ice_generic_flow.c
> @@ -0,0 +1,682 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2019 Intel Corporation
> + */
> +
> +#include <sys/queue.h>
> +#include <stdio.h>
> +#include <errno.h>
> +#include <stdint.h>
> +#include <string.h>

[...]

> +		/* Find a void item */
> +		pe = ice_find_first_item(pb + 1, true);
> +
> +		cpy_count = pe - pb;
> +		rte_memcpy(items, pb, sizeof(struct rte_flow_item) *
> cpy_count);
> +
> +		items += cpy_count;
> +
> +		if (pe->type == RTE_FLOW_ITEM_TYPE_END) {
> +			pb = pe;

No need to "pb = pe".

> +			break;
> +		}
> +
> +		pb = pe + 1;
> +	}
> +	/* Copy the END item. */
> +	rte_memcpy(items, pe, sizeof(struct rte_flow_item));
> +}
> +
> +/* Check if the pattern matches a supported item type array */
> +static bool
> +ice_match_pattern(enum rte_flow_item_type *item_array,
> +		const struct rte_flow_item *pattern)
> +{
> +	const struct rte_flow_item *item = pattern;
> +
> +	while ((*item_array == item->type) &&

[...]

> +			if (icmp6_mask->code ||
> +			    icmp6_mask->checksum) {
> +				rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ITEM,
> +						   item,
> +						   "Invalid ICMP6 mask");
> +				return 0;
> +			}
> +
> +			if (icmp6_mask->type == UINT8_MAX)
> +			input_set |= ICE_INSET_ICMP6;

Indent.

> +			break;
> +		case RTE_FLOW_ITEM_TYPE_VXLAN:
> +			vxlan_spec = item->spec;
> +			vxlan_mask = item->mask;
> +			/* Check if VXLAN item is used to describe protocol.
> +			 * If yes, both spec and mask should be NULL.
> +			 * If no, both spec and mask shouldn't be NULL.
> +			 */
> +			if ((!vxlan_spec && vxlan_mask) ||
> +			    (vxlan_spec && !vxlan_mask)) {
> +				rte_flow_error_set(error, EINVAL,
> +					   RTE_FLOW_ERROR_TYPE_ITEM,
> +					   item,
> +					   "Invalid VXLAN item");
> +				return -rte_errno;

I think you need to return 0 as above, since the caller will check (!field).

> +			}
> +
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_NVGRE:
> +			nvgre_spec = item->spec;
> +			nvgre_mask = item->mask;
> +			/* Check if VXLAN item is used to describe protocol.

Typo: VXLAN->NVGRE

> +			 * If yes, both spec and mask should be NULL.
> +			 * If no, both spec and mask shouldn't be NULL.
> +			 */
> +			if ((!nvgre_spec && nvgre_mask) ||
> +			    (nvgre_spec && !nvgre_mask)) {
> +				rte_flow_error_set(error, EINVAL,
> +					   RTE_FLOW_ERROR_TYPE_ITEM,
> +					   item,
> +					   "Invalid VXLAN item");
> +				return -rte_errno;

Ditto.

> +			}
> +
> +			break;
> +		default:
> +			rte_flow_error_set(error, EINVAL,
> +					   RTE_FLOW_ERROR_TYPE_ITEM,
> +					   item,
> +					   "Invalid mask no exist");
> +			break;
> +		}
> +	}
> +	return input_set;
> +}
> +
> +static int ice_flow_valid_inset(const struct rte_flow_item pattern[],
> +			uint64_t inset, struct rte_flow_error *error)
> +{
> +	uint64_t fields;
> +
> +	/* get valid field */
> +	fields = ice_get_flow_field(pattern, error);
> +	if ((!fields) || (fields && (!inset))) {

Maybe the intention is to : fields & (~inset), checking if the user's input set exceeds support scope.

> +		rte_flow_error_set(error, EINVAL,
> +				   RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
> +				   pattern,
> +				   "Invalid input set");
> +		return -rte_errno;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ice_flow_valid_action(const struct rte_flow_action *actions,
> +				       struct rte_flow_error *error)
> +{
> +	switch (actions->type) {
> +	case RTE_FLOW_ACTION_TYPE_QUEUE:
> +		break;
> +	case RTE_FLOW_ACTION_TYPE_DROP:
> +		break;
> +	default:

[...]
> +				   RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
> +				   "Failed to allocate memory");
> +		return flow;
> +	}
> +
> +	ret = ice_flow_validate(dev, attr, pattern, actions, error);
> +	if (ret < 0)
> +		return NULL;

Goto free_flow

BRs,
Xiao

> +
> +	ret = ice_create_switch_filter(pf, pattern, actions, flow, error);
> +	if (ret)
> +		goto free_flow;
> +
> +	TAILQ_INSERT_TAIL(&pf->flow_list, flow, node);
> +	return flow;
> +
> +free_flow:
> +	rte_flow_error_set(error, -ret,
> +			   RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
> +			   "Failed to create flow.");
> +	rte_free(flow);
> +	return NULL;
> +}
> +
> +static int
> +ice_flow_destroy(struct rte_eth_dev *dev,
> +		 struct rte_flow *flow,
> +		 struct rte_flow_error *error)
> +{
> +	struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> +	int ret = 0;
> +
> +	ret = ice_destroy_switch_filter(pf, flow, error);
> +
> +	if (!ret) {
> +		TAILQ_REMOVE(&pf->flow_list, flow, node);
> +		rte_free(flow);
> +	} else
> +		rte_flow_error_set(error, -ret,
> +				   RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
> +				   "Failed to destroy flow.");
> +
> +	return ret;
> +}
> +
> +static int
> +ice_flow_flush(struct rte_eth_dev *dev,
> +	       struct rte_flow_error *error)
> +{
> +	struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> +	struct rte_flow *p_flow;
> +	int ret;
> +
> +	TAILQ_FOREACH(p_flow, &pf->flow_list, node) {
> +		ret = ice_flow_destroy(dev, p_flow, error);
> +		if (ret) {
> +			rte_flow_error_set(error, -ret,
> +					   RTE_FLOW_ERROR_TYPE_HANDLE,
> NULL,
> +					   "Failed to flush SW flows.");
> +			return -rte_errno;
> +		}
> +	}
> +
> +	return ret;
> +}
> diff --git a/drivers/net/ice/ice_generic_flow.h
> b/drivers/net/ice/ice_generic_flow.h
> new file mode 100644
> index 0000000..ed7f3fe


More information about the dev mailing list