[dpdk-dev] [PATCH v3 1/8] stack: introduce rte stack library
Honnappa Nagarahalli
Honnappa.Nagarahalli at arm.com
Fri Mar 29 00:26:54 CET 2019
Hi Gage,
Apologies for the late comments.
> -----Original Message-----
> From: Gage Eads <gage.eads at intel.com>
> Sent: Wednesday, March 6, 2019 8:46 AM
> To: dev at dpdk.org
> Cc: olivier.matz at 6wind.com; arybchenko at solarflare.com;
> bruce.richardson at intel.com; konstantin.ananyev at intel.com; Gavin Hu (Arm
> Technology China) <Gavin.Hu at arm.com>; Honnappa Nagarahalli
> <Honnappa.Nagarahalli at arm.com>; nd <nd at arm.com>;
> thomas at monjalon.net
> Subject: [PATCH v3 1/8] stack: introduce rte stack library
>
> The rte_stack library provides an API for configuration and use of a bounded
> stack of pointers. Push and pop operations are MT-safe, allowing concurrent
> access, and the interface supports pushing and popping multiple pointers at a
> time.
>
> The library's interface is modeled after another DPDK data structure, rte_ring,
> and its lock-based implementation is derived from the stack mempool
> handler. An upcoming commit will migrate the stack mempool handler to
> rte_stack.
>
> Signed-off-by: Gage Eads <gage.eads at intel.com>
> ---
> MAINTAINERS | 6 +
> config/common_base | 5 +
> doc/api/doxy-api-index.md | 1 +
> doc/api/doxy-api.conf.in | 1 +
> doc/guides/prog_guide/index.rst | 1 +
> doc/guides/prog_guide/stack_lib.rst | 28 ++++
> doc/guides/rel_notes/release_19_05.rst | 5 +
> lib/Makefile | 2 +
> lib/librte_stack/Makefile | 23 +++
> lib/librte_stack/meson.build | 8 +
> lib/librte_stack/rte_stack.c | 194 +++++++++++++++++++++++
> lib/librte_stack/rte_stack.h | 274
> +++++++++++++++++++++++++++++++++
> lib/librte_stack/rte_stack_pvt.h | 34 ++++
> lib/librte_stack/rte_stack_version.map | 9 ++
> lib/meson.build | 2 +-
> mk/rte.app.mk | 1 +
> 16 files changed, 593 insertions(+), 1 deletion(-) create mode 100644
> doc/guides/prog_guide/stack_lib.rst
> create mode 100644 lib/librte_stack/Makefile create mode 100644
> lib/librte_stack/meson.build create mode 100644 lib/librte_stack/rte_stack.c
> create mode 100644 lib/librte_stack/rte_stack.h create mode 100644
> lib/librte_stack/rte_stack_pvt.h create mode 100644
> lib/librte_stack/rte_stack_version.map
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 097cfb4f3..5fca30823 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -405,6 +405,12 @@ F: drivers/raw/skeleton_rawdev/
> F: app/test/test_rawdev.c
> F: doc/guides/prog_guide/rawdev.rst
>
> +Stack API - EXPERIMENTAL
> +M: Gage Eads <gage.eads at intel.com>
> +M: Olivier Matz <olivier.matz at 6wind.com>
> +F: lib/librte_stack/
> +F: doc/guides/prog_guide/stack_lib.rst
> +
>
> Memory Pool Drivers
> -------------------
> diff --git a/config/common_base b/config/common_base index
> 0b09a9348..1b45dea6c 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -980,3 +980,8 @@ CONFIG_RTE_APP_CRYPTO_PERF=y # Compile the
> eventdev application # CONFIG_RTE_APP_EVENTDEV=y
> +
> +#
> +# Compile librte_stack
> +#
> +CONFIG_RTE_LIBRTE_STACK=y
> diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md index
> d95ad566c..0df8848c0 100644
> --- a/doc/api/doxy-api-index.md
> +++ b/doc/api/doxy-api-index.md
> @@ -124,6 +124,7 @@ The public API headers are grouped by topics:
> [mbuf] (@ref rte_mbuf.h),
> [mbuf pool ops] (@ref rte_mbuf_pool_ops.h),
> [ring] (@ref rte_ring.h),
> + [stack] (@ref rte_stack.h),
> [tailq] (@ref rte_tailq.h),
> [bitmap] (@ref rte_bitmap.h)
>
> diff --git a/doc/api/doxy-api.conf.in b/doc/api/doxy-api.conf.in index
> a365e669b..7722fc3e9 100644
> --- a/doc/api/doxy-api.conf.in
> +++ b/doc/api/doxy-api.conf.in
> @@ -55,6 +55,7 @@ INPUT = @TOPDIR@/doc/api/doxy-api-
> index.md \
> @TOPDIR@/lib/librte_ring \
> @TOPDIR@/lib/librte_sched \
> @TOPDIR@/lib/librte_security \
> + @TOPDIR@/lib/librte_stack \
> @TOPDIR@/lib/librte_table \
> @TOPDIR@/lib/librte_telemetry \
> @TOPDIR@/lib/librte_timer \ diff --git
> a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst index
> 6726b1e8d..f4f60862f 100644
> --- a/doc/guides/prog_guide/index.rst
> +++ b/doc/guides/prog_guide/index.rst
> @@ -55,6 +55,7 @@ Programmer's Guide
> metrics_lib
> bpf_lib
> ipsec_lib
> + stack_lib
> source_org
> dev_kit_build_system
> dev_kit_root_make_help
> diff --git a/doc/guides/prog_guide/stack_lib.rst
> b/doc/guides/prog_guide/stack_lib.rst
> new file mode 100644
> index 000000000..25a8cc38a
> --- /dev/null
> +++ b/doc/guides/prog_guide/stack_lib.rst
> @@ -0,0 +1,28 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> + Copyright(c) 2019 Intel Corporation.
> +
> +Stack Library
> +=============
> +
> +DPDK's stack library provides an API for configuration and use of a
> +bounded stack of pointers.
> +
> +The stack library provides the following basic operations:
> +
> +* Create a uniquely named stack of a user-specified size and using a
> + user-specified socket.
> +
> +* Push and pop a burst of one or more stack objects (pointers). These
> function
> + are multi-threading safe.
> +
> +* Free a previously created stack.
> +
> +* Lookup a pointer to a stack by its name.
> +
> +* Query a stack's current depth and number of free entries.
> +
> +Implementation
> +~~~~~~~~~~~~~~
> +
> +The stack consists of a contiguous array of pointers, a current index,
> +and a spinlock. Accesses to the stack are made multi-thread safe by the
> spinlock.
> diff --git a/doc/guides/rel_notes/release_19_05.rst
> b/doc/guides/rel_notes/release_19_05.rst
> index 4a3e2a7f3..8c649a954 100644
> --- a/doc/guides/rel_notes/release_19_05.rst
> +++ b/doc/guides/rel_notes/release_19_05.rst
> @@ -77,6 +77,11 @@ New Features
> which includes the directory name, lib name, filenames, makefile, docs,
> macros, functions, structs and any other strings in the code.
>
> +* **Added Stack API.**
> +
> + Added a new stack API for configuration and use of a bounded stack of
> + pointers. The API provides MT-safe push and pop operations that can
> + operate on one or more pointers per operation.
>
> Removed Items
> -------------
> diff --git a/lib/Makefile b/lib/Makefile index ffbfd0d94..d941bd849 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -109,6 +109,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_IPSEC) += librte_ipsec
> DEPDIRS-librte_ipsec := librte_eal librte_mbuf librte_cryptodev
> librte_security
> DIRS-$(CONFIG_RTE_LIBRTE_TELEMETRY) += librte_telemetry DEPDIRS-
> librte_telemetry := librte_eal librte_metrics librte_ethdev
> +DIRS-$(CONFIG_RTE_LIBRTE_STACK) += librte_stack DEPDIRS-librte_stack :=
> +librte_eal
>
> ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni diff --git
> a/lib/librte_stack/Makefile b/lib/librte_stack/Makefile new file mode 100644
> index 000000000..e956b6535
> --- /dev/null
> +++ b/lib/librte_stack/Makefile
> @@ -0,0 +1,23 @@
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel
> +Corporation
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# library name
> +LIB = librte_stack.a
> +
> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 CFLAGS +=
> +-DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal
> +
> +EXPORT_MAP := rte_stack_version.map
> +
> +LIBABIVER := 1
> +
> +# all source are stored in SRCS-y
> +SRCS-$(CONFIG_RTE_LIBRTE_STACK) := rte_stack.c
> +
> +# install includes
> +SYMLINK-$(CONFIG_RTE_LIBRTE_STACK)-include := rte_stack.h
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_stack/meson.build b/lib/librte_stack/meson.build new
> file mode 100644 index 000000000..99f43710e
> --- /dev/null
> +++ b/lib/librte_stack/meson.build
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel
> +Corporation
> +
> +allow_experimental_apis = true
> +
> +version = 1
> +sources = files('rte_stack.c')
> +headers = files('rte_stack.h')
> diff --git a/lib/librte_stack/rte_stack.c b/lib/librte_stack/rte_stack.c new file
> mode 100644 index 000000000..96dffdf44
> --- /dev/null
> +++ b/lib/librte_stack/rte_stack.c
> @@ -0,0 +1,194 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2019 Intel Corporation
> + */
> +
> +#include <string.h>
> +
> +#include <rte_atomic.h>
> +#include <rte_eal.h>
> +#include <rte_eal_memconfig.h>
> +#include <rte_errno.h>
> +#include <rte_malloc.h>
> +#include <rte_memzone.h>
> +#include <rte_rwlock.h>
> +#include <rte_tailq.h>
> +
> +#include "rte_stack.h"
> +#include "rte_stack_pvt.h"
> +
> +int stack_logtype;
> +
> +TAILQ_HEAD(rte_stack_list, rte_tailq_entry);
> +
> +static struct rte_tailq_elem rte_stack_tailq = {
> + .name = RTE_TAILQ_STACK_NAME,
> +};
> +EAL_REGISTER_TAILQ(rte_stack_tailq)
> +
> +static void
> +rte_stack_std_init(struct rte_stack *s) {
> + rte_spinlock_init(&s->stack_std.lock);
> +}
> +
> +static void
> +rte_stack_init(struct rte_stack *s)
> +{
> + memset(s, 0, sizeof(*s));
> +
> + rte_stack_std_init(s);
> +}
> +
> +static ssize_t
> +rte_stack_get_memsize(unsigned int count) {
> + ssize_t sz = sizeof(struct rte_stack);
> +
> + /* Add padding to avoid false sharing conflicts */
> + sz += RTE_CACHE_LINE_ROUNDUP(count * sizeof(void *)) +
> + 2 * RTE_CACHE_LINE_SIZE;
I did not understand how the false sharing is caused and how this padding is solving the issue. Verbose comments would help.
> +
> + return sz;
> +}
> +
> +struct rte_stack *
> +rte_stack_create(const char *name, unsigned int count, int socket_id,
> + uint32_t flags)
> +{
> + char mz_name[RTE_MEMZONE_NAMESIZE];
> + struct rte_stack_list *stack_list;
> + const struct rte_memzone *mz;
> + struct rte_tailq_entry *te;
> + struct rte_stack *s;
> + unsigned int sz;
> + int ret;
> +
> + RTE_SET_USED(flags);
> +
> + sz = rte_stack_get_memsize(count);
> +
> + ret = snprintf(mz_name, sizeof(mz_name), "%s%s",
> + RTE_STACK_MZ_PREFIX, name);
> + if (ret < 0 || ret >= (int)sizeof(mz_name)) {
> + rte_errno = ENAMETOOLONG;
> + return NULL;
> + }
> +
> + te = rte_zmalloc("STACK_TAILQ_ENTRY", sizeof(*te), 0);
> + if (te == NULL) {
> + STACK_LOG_ERR("Cannot reserve memory for tailq\n");
> + rte_errno = ENOMEM;
> + return NULL;
> + }
> +
> + rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
> +
I think there is a need to check if a stack with the same name exists already.
> + mz = rte_memzone_reserve_aligned(mz_name, sz, socket_id,
> + 0, __alignof__(*s));
> + if (mz == NULL) {
> + STACK_LOG_ERR("Cannot reserve stack memzone!\n");
> + rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> + rte_free(te);
> + return NULL;
> + }
> +
> + s = mz->addr;
> +
> + rte_stack_init(s);
> +
> + /* Store the name for later lookups */
> + ret = snprintf(s->name, sizeof(s->name), "%s", name);
> + if (ret < 0 || ret >= (int)sizeof(s->name)) {
> + rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> +
> + rte_errno = ENAMETOOLONG;
> + rte_free(te);
> + rte_memzone_free(mz);
> + return NULL;
> + }
> +
> + s->memzone = mz;
> + s->capacity = count;
> + s->flags = flags;
> +
> + te->data = s;
> +
> + stack_list = RTE_TAILQ_CAST(rte_stack_tailq.head, rte_stack_list);
> +
> + TAILQ_INSERT_TAIL(stack_list, te, next);
> +
> + rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> +
> + return s;
> +}
> +
> +void
> +rte_stack_free(struct rte_stack *s)
> +{
> + struct rte_stack_list *stack_list;
> + struct rte_tailq_entry *te;
> +
> + if (s == NULL)
> + return;
> +
Adding a check to make sure the length of the stack is 0 would help catch issues?
> + stack_list = RTE_TAILQ_CAST(rte_stack_tailq.head, rte_stack_list);
> + rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
> +
> + /* find out tailq entry */
> + TAILQ_FOREACH(te, stack_list, next) {
> + if (te->data == s)
> + break;
> + }
> +
> + if (te == NULL) {
> + rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> + return;
> + }
> +
> + TAILQ_REMOVE(stack_list, te, next);
> +
> + rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> +
> + rte_free(te);
> +
> + rte_memzone_free(s->memzone);
> +}
> +
> +struct rte_stack *
> +rte_stack_lookup(const char *name)
> +{
> + struct rte_stack_list *stack_list;
> + struct rte_tailq_entry *te;
> + struct rte_stack *r = NULL;
> +
> + if (name == NULL) {
> + rte_errno = EINVAL;
> + return NULL;
> + }
> +
> + stack_list = RTE_TAILQ_CAST(rte_stack_tailq.head, rte_stack_list);
> +
> + rte_rwlock_read_lock(RTE_EAL_TAILQ_RWLOCK);
> +
> + TAILQ_FOREACH(te, stack_list, next) {
> + r = (struct rte_stack *) te->data;
> + if (strncmp(name, r->name, RTE_STACK_NAMESIZE) == 0)
> + break;
> + }
> +
> + rte_rwlock_read_unlock(RTE_EAL_TAILQ_RWLOCK);
> +
> + if (te == NULL) {
> + rte_errno = ENOENT;
> + return NULL;
> + }
> +
> + return r;
> +}
> +
> +RTE_INIT(librte_stack_init_log)
> +{
> + stack_logtype = rte_log_register("lib.stack");
> + if (stack_logtype >= 0)
> + rte_log_set_level(stack_logtype, RTE_LOG_NOTICE); }
> diff --git a/lib/librte_stack/rte_stack.h b/lib/librte_stack/rte_stack.h new file
> mode 100644 index 000000000..7a633deb5
> --- /dev/null
> +++ b/lib/librte_stack/rte_stack.h
> @@ -0,0 +1,274 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2019 Intel Corporation
> + */
> +
> +/**
> + * @file rte_stack.h
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * RTE Stack
> + *
> + * librte_stack provides an API for configuration and use of a bounded
> +stack of
> + * pointers. Push and pop operations are MT-safe, allowing concurrent
> +access,
> + * and the interface supports pushing and popping multiple pointers at a
> time.
> + */
> +
> +#ifndef _RTE_STACK_H_
> +#define _RTE_STACK_H_
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#include <rte_errno.h>
> +#include <rte_memzone.h>
> +#include <rte_spinlock.h>
> +
> +#define RTE_TAILQ_STACK_NAME "RTE_STACK"
> +#define RTE_STACK_MZ_PREFIX "STK_"
Nit, "STACK_" would be easier to debug
> +/** The maximum length of a stack name. */ #define RTE_STACK_NAMESIZE
> +(RTE_MEMZONE_NAMESIZE - \
> + sizeof(RTE_STACK_MZ_PREFIX) + 1)
> +
> +/* Structure containing the LIFO, its current length, and a lock for
> +mutual
> + * exclusion.
> + */
> +struct rte_stack_std {
> + rte_spinlock_t lock; /**< LIFO lock */
> + uint32_t len; /**< LIFO len */
> + void *objs[]; /**< LIFO pointer table */ };
> +
> +/* The RTE stack structure contains the LIFO structure itself, plus
> +metadata
> + * such as its name and memzone pointer.
> + */
> +struct rte_stack {
> + /** Name of the stack. */
> + char name[RTE_STACK_NAMESIZE] __rte_cache_aligned;
> + /** Memzone containing the rte_stack structure. */
> + const struct rte_memzone *memzone;
> + uint32_t capacity; /**< Usable size of the stack. */
> + uint32_t flags; /**< Flags supplied at creation. */
> + struct rte_stack_std stack_std; /**< LIFO structure. */ }
> +__rte_cache_aligned;
> +
> +/**
> + * @internal Push several objects on the stack (MT-safe).
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @param obj_table
> + * A pointer to a table of void * pointers (objects).
> + * @param n
> + * The number of objects to push on the stack from the obj_table.
> + * @return
> + * Actual number of objects pushed (either 0 or *n*).
> + */
> +static __rte_always_inline unsigned int __rte_experimental
This is an internal function. Is '__rte_experimental' tag required?
> +rte_stack_std_push(struct rte_stack *s, void * const *obj_table,
> +unsigned int n) {
Since this is an internal function, does it make sense to add '__' to the beginning of the function name (similar to what is done in rte_ring?).
> + struct rte_stack_std *stack = &s->stack_std;
> + unsigned int index;
> + void **cache_objs;
> +
> + rte_spinlock_lock(&stack->lock);
> + cache_objs = &stack->objs[stack->len];
> +
> + /* Is there sufficient space in the stack? */
> + if ((stack->len + n) > s->capacity) {
> + rte_spinlock_unlock(&stack->lock);
> + return 0;
> + }
> +
> + /* Add elements back into the cache */
> + for (index = 0; index < n; ++index, obj_table++)
> + cache_objs[index] = *obj_table;
> +
> + stack->len += n;
> +
> + rte_spinlock_unlock(&stack->lock);
> + return n;
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Push several objects on the stack (MT-safe).
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @param obj_table
> + * A pointer to a table of void * pointers (objects).
> + * @param n
> + * The number of objects to push on the stack from the obj_table.
> + * @return
> + * Actual number of objects pushed (either 0 or *n*).
> + */
> +static __rte_always_inline unsigned int __rte_experimental
> +rte_stack_push(struct rte_stack *s, void * const *obj_table, unsigned
> +int n) {
> + return rte_stack_std_push(s, obj_table, n); }
> +
> +/**
> + * @internal Pop several objects from the stack (MT-safe).
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @param obj_table
> + * A pointer to a table of void * pointers (objects).
> + * @param n
> + * The number of objects to pull from the stack.
> + * @return
> + * Actual number of objects popped (either 0 or *n*).
> + */
> +static __rte_always_inline unsigned int __rte_experimental
This is an internal function. Is '__rte_experimental' tag required?
> +rte_stack_std_pop(struct rte_stack *s, void **obj_table, unsigned int
> +n) {
> + struct rte_stack_std *stack = &s->stack_std;
> + unsigned int index, len;
> + void **cache_objs;
> +
> + rte_spinlock_lock(&stack->lock);
> +
> + if (unlikely(n > stack->len)) {
> + rte_spinlock_unlock(&stack->lock);
> + return 0;
> + }
> +
> + cache_objs = stack->objs;
> +
> + for (index = 0, len = stack->len - 1; index < n;
> + ++index, len--, obj_table++)
> + *obj_table = cache_objs[len];
> +
> + stack->len -= n;
> + rte_spinlock_unlock(&stack->lock);
> +
> + return n;
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Pop several objects from the stack (MT-safe).
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @param obj_table
> + * A pointer to a table of void * pointers (objects).
> + * @param n
> + * The number of objects to pull from the stack.
> + * @return
> + * Actual number of objects popped (either 0 or *n*).
> + */
> +static __rte_always_inline unsigned int __rte_experimental
> +rte_stack_pop(struct rte_stack *s, void **obj_table, unsigned int n) {
> + if (unlikely(n == 0 || obj_table == NULL))
> + return 0;
's == NULL' can be added as well. Similar check is missing in 'rte_stack_push'. Since these are data-path APIs, RTE_ASSERT would be better.
> +
> + return rte_stack_std_pop(s, obj_table, n); }
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Return the number of used entries in a stack.
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @return
> + * The number of used entries in the stack.
> + */
> +static __rte_always_inline unsigned int __rte_experimental
> +rte_stack_count(struct rte_stack *s) {
> + return (unsigned int)s->stack_std.len; }
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Return the number of free entries in a stack.
> + *
> + * @param s
> + * A pointer to the stack structure.
> + * @return
> + * The number of free entries in the stack.
> + */
> +static __rte_always_inline unsigned int __rte_experimental
> +rte_stack_free_count(struct rte_stack *s) {
> + return s->capacity - rte_stack_count(s); }
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Create a new stack named *name* in memory.
> + *
> + * This function uses ``memzone_reserve()`` to allocate memory for a
> +stack of
> + * size *count*. The behavior of the stack is controlled by the *flags*.
> + *
> + * @param name
> + * The name of the stack.
> + * @param count
> + * The size of the stack.
> + * @param socket_id
> + * The *socket_id* argument is the socket identifier in case of
> + * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
> + * constraint for the reserved zone.
> + * @param flags
> + * Reserved for future use.
> + * @return
> + * On success, the pointer to the new allocated stack. NULL on error with
> + * rte_errno set appropriately. Possible errno values include:
> + * - ENOSPC - the maximum number of memzones has already been
> allocated
> + * - EEXIST - a stack with the same name already exists
This is not implemented currently
> + * - ENOMEM - insufficient memory to create the stack
> + * - ENAMETOOLONG - name size exceeds RTE_STACK_NAMESIZE
> + */
> +struct rte_stack *__rte_experimental
> +rte_stack_create(const char *name, unsigned int count, int socket_id,
> + uint32_t flags);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Free all memory used by the stack.
> + *
> + * @param s
> + * Stack to free
> + */
> +void __rte_experimental
> +rte_stack_free(struct rte_stack *s);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Lookup a stack by its name.
> + *
> + * @param name
> + * The name of the stack.
> + * @return
> + * The pointer to the stack matching the name, or NULL if not found,
> + * with rte_errno set appropriately. Possible rte_errno values include:
> + * - ENOENT - Stack with name *name* not found.
> + * - EINVAL - *name* pointer is NULL.
> + */
> +struct rte_stack * __rte_experimental
> +rte_stack_lookup(const char *name);
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_STACK_H_ */
> diff --git a/lib/librte_stack/rte_stack_pvt.h b/lib/librte_stack/rte_stack_pvt.h
> new file mode 100644
> index 000000000..4a6a7bdb3
> --- /dev/null
> +++ b/lib/librte_stack/rte_stack_pvt.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2019 Intel Corporation
> + */
> +
> +#ifndef _RTE_STACK_PVT_H_
> +#define _RTE_STACK_PVT_H_
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#include <rte_log.h>
> +
> +extern int stack_logtype;
> +
> +#define STACK_LOG(level, fmt, args...) \
> + rte_log(RTE_LOG_ ##level, stack_logtype, "%s(): "fmt "\n", \
> + __func__, ##args)
> +
> +#define STACK_LOG_ERR(fmt, args...) \
> + STACK_LOG(ERR, fmt, ## args)
> +
> +#define STACK_LOG_WARN(fmt, args...) \
> + STACK_LOG(WARNING, fmt, ## args)
> +
> +#define STACK_LOG_INFO(fmt, args...) \
> + STACK_LOG(INFO, fmt, ## args)
> +
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_STACK_PVT_H_ */
> diff --git a/lib/librte_stack/rte_stack_version.map
> b/lib/librte_stack/rte_stack_version.map
> new file mode 100644
> index 000000000..6662679c3
> --- /dev/null
> +++ b/lib/librte_stack/rte_stack_version.map
> @@ -0,0 +1,9 @@
> +EXPERIMENTAL {
> + global:
> +
> + rte_stack_create;
> + rte_stack_free;
> + rte_stack_lookup;
> +
> + local: *;
> +};
> diff --git a/lib/meson.build b/lib/meson.build index 99957ba7d..90115477f
> 100644
> --- a/lib/meson.build
> +++ b/lib/meson.build
> @@ -22,7 +22,7 @@ libraries = [
> 'gro', 'gso', 'ip_frag', 'jobstats',
> 'kni', 'latencystats', 'lpm', 'member',
> 'power', 'pdump', 'rawdev',
> - 'reorder', 'sched', 'security', 'vhost',
> + 'reorder', 'sched', 'security', 'stack', 'vhost',
> #ipsec lib depends on crypto and security
> 'ipsec',
> # add pkt framework libs which use other libs from above diff --git
> a/mk/rte.app.mk b/mk/rte.app.mk index 3c40f9df2..8decfb851 100644
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -87,6 +87,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_SECURITY) += -
> lrte_security
> _LDLIBS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += -lrte_compressdev
> _LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev
> _LDLIBS-$(CONFIG_RTE_LIBRTE_RAWDEV) += -lrte_rawdev
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_STACK) += -lrte_stack
> _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
> _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring
> --
> 2.13.6
More information about the dev
mailing list