[dpdk-dev] [v2] net/ixgbe:fix wrong link status

[Ye Xiaolong]

On 10/29, Xiao Zhang wrote:
>The link status for 82599eb got from link status register was not correct,
>check the enable/disable flag of tx laser when getting the link status,
>set the link status down if tx laser disabled since the tx laser flag
>could be set correctly when up/down the link status.
>
>Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
>Cc: stable at dpdk.org
>
>Signed-off-by: Xiao Zhang <xiao.zhang at intel.com>
>Reviewed-by: Wei Zhao <wei.zhao1 at intel.com>
>---
>v2
>Rebase the patch to latest master code.
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index dbce7a8..3202c28 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -2904,6 +2904,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> 	} else {
> 		/* Turn on the laser */
> 		ixgbe_enable_tx_laser(hw);
>+		ixgbe_dev_link_update(dev, 0);
> 	}
> 
> 	return 0;
>@@ -2934,6 +2935,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> 	} else {
> 		/* Turn off the laser */
> 		ixgbe_disable_tx_laser(hw);
>+		ixgbe_dev_link_update(dev, 0);
> 	}
> 
> 	return 0;
>@@ -4108,6 +4110,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> 	int link_up;
> 	int diag;
> 	int wait = 1;
>+	u32 esdp_reg;
> 
> 	memset(&link, 0, sizeof(link));
> 	link.link_status = ETH_LINK_DOWN;
>@@ -4135,6 +4138,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> 		return rte_eth_linkstatus_set(dev, &link);
> 	}
> 
>+	esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
>+	if ((esdp_reg & IXGBE_ESDP_SDP3))
>+		link_up = 0;
>+
> 	if (link_up == 0) {
> 		if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
> 			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
>-- 
>2.7.4
>

Acked-by: Xiaolong Ye <xiaolong.ye at intel.com>

Applied to dpdk-next-net-intel. Thanks.