[dpdk-dev] [PATCH] examples/l3fwd: use correct IP reserved address range
Stephen Hemminger
stephen at networkplumber.org
Tue Nov 5 17:09:21 CET 2019
The original patch used incorrect subnet range for testing.
Fixes: 37afe381bde4 ("examples/l3fwd: use reserved IP addresses")
Reported-by: Ferruh Yigit <ferruh.yigit at intel.com>
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
doc/guides/testpmd_app_ug/run_app.rst | 6 +++---
examples/l3fwd/l3fwd_lpm.c | 18 +++++++++---------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 00e0c2ac5152..858cec7e0b0b 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -129,9 +129,9 @@ The command line options are:
* ``--tx-ip=SRC,DST``
Set the source and destination IP address used when doing transmit only test.
- The defaults address values are source 192.18.0.1 and
- destination 192.18.0.2. These are special purpose addresses
- reserved for benchmarking (RFC 2544).
+ The defaults address values are source 198.18.0.1 and
+ destination 198.18.0.2. These are special purpose addresses
+ reserved for benchmarking (RFC 5735).
* ``--tx-udp=SRC[,DST]``
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index a3a65f7fc814..349de2703cd1 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -41,16 +41,16 @@ struct ipv6_l3fwd_lpm_route {
uint8_t if_out;
};
-/* 192.18.0.0/16 are set aside for RFC2544 benchmarking. */
+/* 198.18.0.0/16 are set aside for RFC2544 benchmarking (RFC5735). */
static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = {
- {RTE_IPV4(192, 18, 0, 0), 24, 0},
- {RTE_IPV4(192, 18, 1, 0), 24, 1},
- {RTE_IPV4(192, 18, 2, 0), 24, 2},
- {RTE_IPV4(192, 18, 3, 0), 24, 3},
- {RTE_IPV4(192, 18, 4, 0), 24, 4},
- {RTE_IPV4(192, 18, 5, 0), 24, 5},
- {RTE_IPV4(192, 18, 6, 0), 24, 6},
- {RTE_IPV4(192, 18, 7, 0), 24, 7},
+ {RTE_IPV4(198, 18, 0, 0), 24, 0},
+ {RTE_IPV4(198, 18, 1, 0), 24, 1},
+ {RTE_IPV4(198, 18, 2, 0), 24, 2},
+ {RTE_IPV4(198, 18, 3, 0), 24, 3},
+ {RTE_IPV4(198, 18, 4, 0), 24, 4},
+ {RTE_IPV4(198, 18, 5, 0), 24, 5},
+ {RTE_IPV4(198, 18, 6, 0), 24, 6},
+ {RTE_IPV4(198, 18, 7, 0), 24, 7},
};
/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180) */
--
2.20.1
More information about the dev
mailing list