[dpdk-dev] [PATCH v2 3/3] app/testpmd: use API to set max LRO packet size
Iremonger, Bernard
bernard.iremonger at intel.com
Wed Nov 6 13:35:48 CET 2019
Hi Dekel,
> -----Original Message-----
> From: Dekel Peled <dekelp at mellanox.com>
> Sent: Wednesday, November 6, 2019 11:35 AM
> To: Mcnamara, John <john.mcnamara at intel.com>; Kovacevic, Marko
> <marko.kovacevic at intel.com>; nhorman at tuxdriver.com;
> ajit.khaparde at broadcom.com; somnath.kotur at broadcom.com; Burakov,
> Anatoly <anatoly.burakov at intel.com>; xuanziyang2 at huawei.com;
> cloud.wangxiaoyun at huawei.com; zhouguoyang at huawei.com; Lu, Wenzhuo
> <wenzhuo.lu at intel.com>; Ananyev, Konstantin
> <konstantin.ananyev at intel.com>; matan at mellanox.com;
> shahafs at mellanox.com; viacheslavo at mellanox.com; rmody at marvell.com;
> shshaikh at marvell.com; maxime.coquelin at redhat.com; Bie, Tiwei
> <tiwei.bie at intel.com>; Wang, Zhihong <zhihong.wang at intel.com>;
> yongwang at vmware.com; thomas at monjalon.net; Yigit, Ferruh
> <ferruh.yigit at intel.com>; arybchenko at solarflare.com; Wu, Jingjing
> <jingjing.wu at intel.com>; Iremonger, Bernard
> <bernard.iremonger at intel.com>
> Cc: dev at dpdk.org
> Subject: [PATCH v2 3/3] app/testpmd: use API to set max LRO packet size
>
> This patch implements use of the API for LRO aggregated packet max size.
> It adds command-line and runtime commands to configure this value, and
> adds option to show the supported value.
> Documentation is updated accordingly.
>
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> ---
> app/test-pmd/cmdline.c | 73
> +++++++++++++++++++++++++++++
> app/test-pmd/config.c | 2 +
> app/test-pmd/parameters.c | 5 ++
> app/test-pmd/testpmd.c | 1 +
> doc/guides/testpmd_app_ug/run_app.rst | 5 ++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 ++++
> 6 files changed, 95 insertions(+)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 4478069..edfa60f 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -2037,6 +2037,78 @@ struct cmd_config_max_pkt_len_result {
> },
> };
>
> +/* *** config max LRO aggregated packet size *** */ struct
> +cmd_config_max_lro_pkt_size_result {
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t keyword;
> + cmdline_fixed_string_t all;
> + cmdline_fixed_string_t name;
> + uint32_t value;
> +};
> +
> +static void
> +cmd_config_max_lro_pkt_size_parsed(void *parsed_result,
> + __attribute__((unused)) struct cmdline *cl,
> + __attribute__((unused)) void *data) {
> + struct cmd_config_max_lro_pkt_size_result *res = parsed_result;
> + portid_t pid;
> +
> + if (!all_ports_stopped()) {
> + printf("Please stop all ports first\n");
> + return;
> + }
> +
> + RTE_ETH_FOREACH_DEV(pid) {
> + struct rte_port *port = &ports[pid];
> +
> + if (!strcmp(res->name, "max-lro-pkt-size")) {
> + if (res->value ==
> + port-
> >dev_conf.rxmode.max_lro_pkt_size)
> + return;
> +
Should there be a check on the input value, max is RTE_ETHER_MAX_LEN ?
> + port->dev_conf.rxmode.max_lro_pkt_size = res-
> >value;
> + } else {
> + printf("Unknown parameter\n");
> + return;
> + }
> + }
> +
> + init_port_config();
> +
> + cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1); }
> +
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_port =
> + TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> + port, "port");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_keyword =
> + TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> + keyword, "config");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_all =
> + TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> + all, "all");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_name =
> + TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> + name, "max-lro-pkt-size");
> +cmdline_parse_token_num_t cmd_config_max_lro_pkt_size_value =
> + TOKEN_NUM_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> + value, UINT32);
> +
> +cmdline_parse_inst_t cmd_config_max_lro_pkt_size = {
> + .f = cmd_config_max_lro_pkt_size_parsed,
> + .data = NULL,
> + .help_str = "port config all max-lro-pkt-size <value>",
> + .tokens = {
> + (void *)&cmd_config_max_lro_pkt_size_port,
> + (void *)&cmd_config_max_lro_pkt_size_keyword,
> + (void *)&cmd_config_max_lro_pkt_size_all,
> + (void *)&cmd_config_max_lro_pkt_size_name,
> + (void *)&cmd_config_max_lro_pkt_size_value,
> + NULL,
> + },
> +};
> +
> /* *** configure port MTU *** */
> struct cmd_config_mtu_result {
> cmdline_fixed_string_t port;
> @@ -19024,6 +19096,7 @@ struct
> cmd_show_port_supported_ptypes_result {
> (cmdline_parse_inst_t *)&cmd_config_rx_tx,
> (cmdline_parse_inst_t *)&cmd_config_mtu,
> (cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
> + (cmdline_parse_inst_t *)&cmd_config_max_lro_pkt_size,
> (cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
> (cmdline_parse_inst_t *)&cmd_config_rss,
> (cmdline_parse_inst_t *)&cmd_config_rxtx_ring_size, diff --git
> a/app/test-pmd/config.c b/app/test-pmd/config.c index efe2812..50e6ac0
> 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -629,6 +629,8 @@ static int bus_match_all(const struct rte_bus *bus,
> const void *data)
> printf("Minimum size of RX buffer: %u\n",
> dev_info.min_rx_bufsize);
> printf("Maximum configurable length of RX packet: %u\n",
> dev_info.max_rx_pktlen);
> + printf("Maximum configurable size of LRO aggregated packet: %u\n",
> + dev_info.max_lro_pkt_size);
> if (dev_info.max_vfs)
> printf("Maximum number of VFs: %u\n", dev_info.max_vfs);
> if (dev_info.max_vmdq_pools)
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
> 9ea87c1..3e371e2 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -592,6 +592,7 @@
> { "mbuf-size", 1, 0, 0 },
> { "total-num-mbufs", 1, 0, 0 },
> { "max-pkt-len", 1, 0, 0 },
> + { "max-lro-pkt-size", 1, 0, 0 },
The max-lro-pkt-size option should be documented in the usage() function around line 110 in parameters.c
> { "pkt-filter-mode", 1, 0, 0 },
> { "pkt-filter-report-hash", 1, 0, 0 },
> { "pkt-filter-size", 1, 0, 0 },
> @@ -888,6 +889,10 @@
> "Invalid max-pkt-len=%d -
> should be > %d\n",
> n, RTE_ETHER_MIN_LEN);
> }
> + if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-
> size")) {
> + n = atoi(optarg);
Should there be a check on the value input, max value is RTE_ETHER_MAX_LEN?
> + rx_mode.max_lro_pkt_size = (uint32_t) n;
> + }
> if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode"))
> {
> if (!strcmp(optarg, "signature"))
> fdir_conf.mode =
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 38acbc5..d4f67ec 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -419,6 +419,7 @@ struct fwd_engine * fwd_engines[] = { struct
> rte_eth_rxmode rx_mode = {
> .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> /**< Default maximum frame length. */
> + .max_lro_pkt_size = RTE_ETHER_MAX_LEN,
> };
>
> struct rte_eth_txmode tx_mode = {
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> b/doc/guides/testpmd_app_ug/run_app.rst
> index ef677ba..bc17f3f 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -112,6 +112,11 @@ The command line options are:
>
> Set the maximum packet size to N bytes, where N >= 64. The default value
> is 1518.
>
> +* ``--max-lro-pkt-size=N``
> +
> + Set the maximum LRO aggregated packet size to N bytes, where N >= 64.
> + The default value is 1518.
Should a max value be specified ?
> +
> * ``--eth-peers-configfile=name``
>
> Use a configuration file containing the Ethernet addresses of the peer
> ports.
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index c68a742..0267295 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2139,6 +2139,15 @@ Set the maximum packet length::
>
> This is equivalent to the ``--max-pkt-len`` command-line option.
>
> +port config - max-lro-pkt-size
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set the maximum LRO aggregated packet size::
> +
> + testpmd> port config all max-lro-pkt-size (value)
> +
> +This is equivalent to the ``--max-lro-pkt-size`` command-line option.
> +
> port config - Drop Packets
> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> --
> 1.8.3.1
Regards,
Bernard.
More information about the dev
mailing list