[dpdk-dev] [PATCH] net/mlx5: fix flow engine select by rdma-core ver
Ferruh Yigit
ferruh.yigit at intel.com
Tue Nov 26 12:29:15 CET 2019
On 11/26/2019 8:34 AM, Dekel Peled wrote:
> Recent patch [1] sets the DV (Direct Verbs) flow engine as default.
> Newer versions of DV flow engine use the DR (Direct Rules) features.
> DR is supported from RDMA Core library version rdma-core-24.0.
> This cause failure to start port when using older rdma-core version,
> without DR support.
>
> This patch selects DV flow engine if rdma-core version is v24.0 or
> higher. Verbs flow engine is selected otherwise.
>
> [1] http://patches.dpdk.org/patch/61900/
Can you please add reference to the git commit instead of the patchwork, and I
assume the commit is the one ins the fixes line, so why to add additional
patchwork link too?
>
> Fixes: cd4569d2bf3c ("net/mlx5: change default flow engine to DV")
>
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> Acked-by: Ori Kam <orika at mellanox.com>
> ---
> doc/guides/nics/mlx5.rst | 2 +-
> doc/guides/rel_notes/release_19_11.rst | 3 +++
> drivers/net/mlx5/mlx5.c | 2 +-
> 3 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index 2080766..771970f 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -673,7 +673,7 @@ Run-time configuration
> - ``dv_flow_en`` parameter [int]
>
> A nonzero value enables the DV flow steering assuming it is supported
> - by the driver.
> + by the driver (RDMA Core library version is rdma-core-24.0 or higher).
>
> Enabled by default if supported.
>
> diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
> index 48c80e5..928698e 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -193,6 +193,9 @@ New Features
> * Added support for matching on packets withe Geneve tunnel header.
> * Added hairpin support.
> * Added ConnectX6-DX support.
> + * Flow engine selected based on RDMA Core library version.
> + DV flow engine selected if version is rdma-core-24.0 or higher.
> + Verbs flow engine selected otherwise.
>
> * **Updated the AF_XDP PMD.**
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 59ae408..8abd1b1 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -2428,7 +2428,7 @@ struct mlx5_flow_id_pool *
> !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
> DRV_LOG(DEBUG, "counters are not supported");
> #endif
> -#ifndef HAVE_IBV_FLOW_DV_SUPPORT
> +#if !defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_MLX5DV_DR)
> if (config.dv_flow_en) {
> DRV_LOG(WARNING, "DV flow is not supported");
> config.dv_flow_en = 0;
>
More information about the dev
mailing list