[dpdk-dev] [PATCH v2 15/17] net/hinic: add hinic PMD doc files

[Xiaoyun wang]

Add doc files about new features and modification.

Signed-off-by: Xiaoyun wang <cloud.wangxiaoyun at huawei.com>
---
 doc/guides/nics/features/hinic.ini     | 12 ++++++++-
 doc/guides/nics/hinic.rst              |  6 +++++
 doc/guides/rel_notes/release_19_11.rst | 45 ++++++----------------------------
 3 files changed, 25 insertions(+), 38 deletions(-)

diff --git a/doc/guides/nics/features/hinic.ini b/doc/guides/nics/features/hinic.ini
index fe063d6..dc02b4b 100644
--- a/doc/guides/nics/features/hinic.ini
+++ b/doc/guides/nics/features/hinic.ini
@@ -9,16 +9,22 @@ Link status          = Y
 Link status event    = Y
 Free Tx mbuf on demand = Y
 Queue start/stop     = Y
-Jumbo frame          = N
+MTU update           = Y
+Jumbo frame          = Y
 Scattered Rx         = Y
 TSO                  = Y
+LRO                  = Y
 Promiscuous mode     = Y
+Allmulticast mode    = Y
 Unicast MAC filter   = Y
 Multicast MAC filter = Y
 RSS hash             = Y
 RSS key update       = Y
 RSS reta update      = Y
 Inner RSS            = Y
+SR-IOV               = Y
+VLAN filter          = Y
+VLAN offload         = Y
 CRC offload          = Y
 L3 checksum offload  = Y
 L4 checksum offload  = Y
@@ -27,6 +33,10 @@ Inner L4 checksum    = Y
 Basic stats          = Y
 Extended stats       = Y
 Stats per queue      = Y
+Flow director        = Y
+Flow control         = Y
+FW version           = Y
+Multiprocess aware   = Y
 Linux UIO            = Y
 Linux VFIO           = Y
 BSD nic_uio          = N
diff --git a/doc/guides/nics/hinic.rst b/doc/guides/nics/hinic.rst
index c9329bc..f036fc5 100644
--- a/doc/guides/nics/hinic.rst
+++ b/doc/guides/nics/hinic.rst
@@ -24,6 +24,12 @@ Features
 - Link state information
 - Link flow control
 - Scattered and gather for TX and RX
+- SR¨CIOV - Partially supported at this point, VFIO only
+- Allmulticast mode
+- Unicast MAC filter
+- Multicast MAC filter
+- FW version
+- Flow director
 
 Prerequisites
 -------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 65361c4..6c6f27f 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -56,11 +56,15 @@ New Features
      Also, make sure to start the actual text at the margin.
      =========================================================
 
-* **Updated the Intel ice driver.**
+* **Updated the Huawei hinic driver.**
 
-  Updated the Intel ice driver with new features and improvements, including:
+  Updated the Huawei hinic driver with new features and improvements, including:
 
-  * Added support for device-specific DDP package loading.
+  * Enabled SR-IOV - Partially supported at this point, VFIO only.
+  * Supported VLAN filter and VLAN offload.
+  * Supported Unicast MAC filter and Multicast MAC filter.
+  * Supported FW version get.
+  * Supported Flow director for LACP, VRRP, BGP and so on.
 
 Removed Items
 -------------
@@ -99,30 +103,6 @@ API Changes
    Also, make sure to start the actual text at the margin.
    =========================================================
 
-* ethdev: changed ``rte_eth_dev_infos_get`` return value from ``void`` to
-  ``int`` to provide a way to report various error conditions.
-
-* ethdev: changed ``rte_eth_promiscuous_enable`` and
-  ``rte_eth_promiscuous_disable`` return value from ``void`` to ``int`` to
-  provide a way to report various error conditions.
-
-* ethdev: changed ``rte_eth_allmulticast_enable`` and
-  ``rte_eth_allmulticast_disable`` return value from ``void`` to ``int`` to
-  provide a way to report various error conditions.
-
-* ethdev: changed ``rte_eth_dev_xstats_reset`` return value from ``void`` to
-  ``int`` to provide a way to report various error conditions.
-
-* ethdev: changed ``rte_eth_link_get`` and ``rte_eth_link_get_nowait``
-  return value from ``void`` to ``int`` to provide a way to report various
-  error conditions.
-
-* ethdev: changed ``rte_eth_macaddr_get`` return value from ``void`` to
-  ``int`` to provide a way to report various error conditions.
-
-* ethdev: changed ``rte_eth_dev_owner_delete`` return value from ``void`` to
-  ``int`` to provide a way to report various error conditions.
-
 
 ABI Changes
 -----------
@@ -174,7 +154,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_distributor.so.1
      librte_eal.so.11
      librte_efd.so.1
-   + librte_ethdev.so.13
+     librte_ethdev.so.12
      librte_eventdev.so.7
      librte_flow_classify.so.1
      librte_gro.so.1
@@ -252,12 +232,3 @@ Tested Platforms
    Also, make sure to start the actual text at the margin.
    =========================================================
 
-* **Updated Mellanox mlx5 driver.**
-
-  Updated Mellanox mlx5 driver with new features and improvements, including:
-
-  * Added support for VLAN pop flow offload command.
-  * Added support for VLAN push flow offload command.
-  * Added support for VLAN set PCP offload command.
-  * Added support for VLAN set VID offload command.
-
-- 
1.8.3.1