[dpdk-dev] [PATCH v3 11/11] net/octeontx2: add tm capability callbacks

[Jerin Jacob]

On Fri, Apr 3, 2020 at 2:24 PM Nithin Dabilpuram <nithind1988 at gmail.com> wrote:
>
> From: Krzysztof Kanas <kkanas at marvell.com>
>
> Add Traffic Management capability callbacks to provide
> global, level and node capabilities. This patch also
> adds documentation on Traffic Management Support.
>
> Signed-off-by: Nithin Dabilpuram <ndabilpuram at marvell.com>
> Signed-off-by: Krzysztof Kanas <kkanas at marvell.com>

After fixing the below issues(inlined)
Series applied to dpdk-next-net-mrvl/master. Thanks.


> ---
>
> diff --git a/doc/guides/nics/features/octeontx2.ini b/doc/guides/nics/features/octeontx2.ini
> index 473fe56..fb13517 100644
> --- a/doc/guides/nics/features/octeontx2.ini
> +++ b/doc/guides/nics/features/octeontx2.ini
> @@ -31,6 +31,7 @@ Inline protocol      = Y
>  VLAN filter          = Y
>  Flow control         = Y
>  Flow API             = Y
> +Rate limitation      = Y

Definition this "Rate limitation" and TM rate limitation functionally
the same. But the interface is different.
Following is the interface for the above "Rate limitation" feature.
So, Above "Y" is not applicable.

Rate limitation
---------------

Supports Tx rate limitation for a queue.

* **[implements] eth_dev_ops**: ``set_queue_rate_limit``.
* **[related]    API**: ``rte_eth_set_queue_rate_limit()``




>  Jumbo frame          = Y
>  Scattered Rx         = Y
>  VLAN offload         = Y
> diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
> index 60187ec..6b885d6 100644
> --- a/doc/guides/nics/octeontx2.rst
> +++ b/doc/guides/nics/octeontx2.rst
> @@ -39,6 +39,7 @@ Features of the OCTEON TX2 Ethdev PMD are:
>  - HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection
>  - Support Rx interrupt
>  - Inline IPsec processing support
> +- :ref:`Traffic Management API <tmapi>`

tmapi ref is pointing to mvpp2 driver index.


>
>  Prerequisites
>  -------------
> @@ -213,6 +214,20 @@ Runtime Config Options
>     parameters to all the PCIe devices if application requires to configure on
>     all the ethdev ports.
>
> +Traffic Management API
> +----------------------
> +
> +OCTEON TX2 PMD supports generic DPDK Traffic Management API which allows to
> +configure the following features:
> +
> +1. Hierarchical scheduling
> +2. Single rate - two color, Two rate - three color shaping

Use #. to auto enumerate.

> +
> +Both DWRR and Static Priority(SP) hierarchial scheduling is supported.
> +Every parent can have atmost 10 SP Children and unlimited DWRR children.
> +Both PF & VF supports traffic management API with PF supporting 6 levels
> +and VF supporting 5 levels of topology.
> +
>  Limitations
>  -----------
>
> diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
> index 000bbf5..47a9825 100644
> --- a/doc/guides/rel_notes/release_20_05.rst
> +++ b/doc/guides/rel_notes/release_20_05.rst
> @@ -62,6 +62,14 @@ New Features
>
>    * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit.
>
> +* **Updated Marvell OCTEON TX2 ethdev driver.**
> +
> + Updated Marvell OCTEON TX2 ethdev driver with traffic manager support with
> + below features.
> +
> + * Hierarchial Scheduling with DWRR and SP.
> + * Single rate - two color, Two rate - three color shaping.

Alignment is not correct wrt to other items.