[dpdk-dev] [PATCH 1/3] vdpa/mlx5: manage virtqs by array

[Maxime Coquelin]

On 4/10/20 3:58 PM, Matan Azrad wrote:
> Hi Maxime
> 
> From: Maxime Coquelin
>> On 3/31/20 1:12 PM, Matan Azrad wrote:
>>> As a preparation to listen the virtqs status before the device is
>>> configured, manage the virtqs structures in array instead of list.
>>>
>>> Signed-off-by: Matan Azrad <matan at mellanox.com>
>>> Acked-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>
>>> ---
>>>  drivers/vdpa/mlx5/mlx5_vdpa.c       | 43 ++++++++++++++++----------------
>> --
>>>  drivers/vdpa/mlx5/mlx5_vdpa.h       |  2 +-
>>>  drivers/vdpa/mlx5/mlx5_vdpa_lm.c    | 43 ++++++++++++++++--------------
>> ----
>>>  drivers/vdpa/mlx5/mlx5_vdpa_steer.c | 18 +++++++--------
>>> drivers/vdpa/mlx5/mlx5_vdpa_virtq.c | 46
>>> +++++++++++++++----------------------
>>>  5 files changed, 68 insertions(+), 84 deletions(-)
>>>
>>> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa.c
>>> b/drivers/vdpa/mlx5/mlx5_vdpa.c index f10647b..b22f074 100644
>>> --- a/drivers/vdpa/mlx5/mlx5_vdpa.c
>>> +++ b/drivers/vdpa/mlx5/mlx5_vdpa.c
>>> @@ -116,20 +116,18 @@
>>>  {
>>>  	int did = rte_vhost_get_vdpa_device_id(vid);
>>>  	struct mlx5_vdpa_priv *priv =
>> mlx5_vdpa_find_priv_resource_by_did(did);
>>> -	struct mlx5_vdpa_virtq *virtq = NULL;
>>>
>>>  	if (priv == NULL) {
>>>  		DRV_LOG(ERR, "Invalid device id: %d.", did);
>>>  		return -EINVAL;
>>>  	}
>>> -	SLIST_FOREACH(virtq, &priv->virtq_list, next)
>>> -		if (virtq->index == vring)
>>> -			break;
>>> -	if (!virtq) {
>>> +	if (!priv->configured || vring >= RTE_MIN((int)priv->nr_virtqs,
>>> +	    (int)priv->caps.max_num_virtio_queues * 2) ||
>>> +	    !priv->virtqs[vring].virtq) {
>>>  		DRV_LOG(ERR, "Invalid or unconfigured vring id: %d.", vring);
>>>  		return -EINVAL;
>>>  	}
>>> -	return mlx5_vdpa_virtq_enable(virtq, state);
>>> +	return mlx5_vdpa_virtq_enable(&priv->virtqs[vring], state);
>>>  }
>>>
>>>  static int
>>> @@ -482,28 +480,28 @@
>>>  		rte_errno = ENODEV;
>>>  		return -rte_errno;
>>>  	}
>>> -	priv = rte_zmalloc("mlx5 vDPA device private", sizeof(*priv),
>>> -			   RTE_CACHE_LINE_SIZE);
>>> -	if (!priv) {
>>> -		DRV_LOG(ERR, "Failed to allocate private memory.");
>>> -		rte_errno = ENOMEM;
>>> -		goto error;
>>> -	}
>>>  	ret = mlx5_devx_cmd_query_hca_attr(ctx, &attr);
>>>  	if (ret) {
>>>  		DRV_LOG(ERR, "Unable to read HCA capabilities.");
>>>  		rte_errno = ENOTSUP;
>>>  		goto error;
>>> -	} else {
>>> -		if (!attr.vdpa.valid || !attr.vdpa.max_num_virtio_queues) {
>>> -			DRV_LOG(ERR, "Not enough capabilities to support
>> vdpa,"
>>> -				" maybe old FW/OFED version?");
>>> -			rte_errno = ENOTSUP;
>>> -			goto error;
>>> -		}
>>> -		priv->caps = attr.vdpa;
>>> -		priv->log_max_rqt_size = attr.log_max_rqt_size;
>>> +	} else if (!attr.vdpa.valid || !attr.vdpa.max_num_virtio_queues) {
>>> +		DRV_LOG(ERR, "Not enough capabilities to support vdpa,
>> maybe "
>>> +			"old FW/OFED version?");
>>> +		rte_errno = ENOTSUP;
>>> +		goto error;
>>> +	}
>>> +	priv = rte_zmalloc("mlx5 vDPA device private", sizeof(*priv) +
>>> +			   sizeof(struct mlx5_vdpa_virtq) *
>>> +			   attr.vdpa.max_num_virtio_queues * 2,
>>> +			   RTE_CACHE_LINE_SIZE);
>>> +	if (!priv) {
>>> +		DRV_LOG(ERR, "Failed to allocate private memory.");
>>> +		rte_errno = ENOMEM;
>>> +		goto error;
>>>  	}
>>> +	priv->caps = attr.vdpa;
>>> +	priv->log_max_rqt_size = attr.log_max_rqt_size;
>>>  	priv->ctx = ctx;
>>>  	priv->dev_addr.pci_addr = pci_dev->addr;
>>>  	priv->dev_addr.type = PCI_ADDR;
>>> @@ -519,7 +517,6 @@
>>>  		goto error;
>>>  	}
>>>  	SLIST_INIT(&priv->mr_list);
>>> -	SLIST_INIT(&priv->virtq_list);
>>>  	pthread_mutex_lock(&priv_list_lock);
>>>  	TAILQ_INSERT_TAIL(&priv_list, priv, next);
>>>  	pthread_mutex_unlock(&priv_list_lock);
>>> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa.h
>>> b/drivers/vdpa/mlx5/mlx5_vdpa.h index 75af410..baec106 100644
>>> --- a/drivers/vdpa/mlx5/mlx5_vdpa.h
>>> +++ b/drivers/vdpa/mlx5/mlx5_vdpa.h
>>> @@ -120,11 +120,11 @@ struct mlx5_vdpa_priv {
>>>  	uint16_t nr_virtqs;
>>>  	uint64_t features; /* Negotiated features. */
>>>  	uint16_t log_max_rqt_size;
>>> -	SLIST_HEAD(virtq_list, mlx5_vdpa_virtq) virtq_list;
>>>  	struct mlx5_vdpa_steer steer;
>>>  	struct mlx5dv_var *var;
>>>  	void *virtq_db_addr;
>>>  	SLIST_HEAD(mr_list, mlx5_vdpa_query_mr) mr_list;
>>> +	struct mlx5_vdpa_virtq virtqs[];
>>>  };
>>>
>>>  /**
>>> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
>>> b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
>>> index 4457760..77f2eda 100644
>>> --- a/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
>>> +++ b/drivers/vdpa/mlx5/mlx5_vdpa_lm.c
>>> @@ -15,13 +15,12 @@
>>>  		.type =
>> MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE,
>>>  		.dirty_bitmap_dump_enable = enable,
>>>  	};
>>> -	struct mlx5_vdpa_virtq *virtq;
>>> +	int i;
>>>
>>> -	SLIST_FOREACH(virtq, &priv->virtq_list, next) {
>>> -		attr.queue_index = virtq->index;
>>> -		if (mlx5_devx_cmd_modify_virtq(virtq->virtq, &attr)) {
>>> -			DRV_LOG(ERR, "Failed to modify virtq %d logging.",
>>> -				virtq->index);
>>> +	for (i = 0; i < priv->nr_virtqs; ++i) {
>>> +		attr.queue_index = i;
>>> +		if (mlx5_devx_cmd_modify_virtq(priv->virtqs[i].virtq, &attr))
>> {
>>> +			DRV_LOG(ERR, "Failed to modify virtq %d logging.",
>> i);
>>>  			return -1;
>>>  		}
>>>  	}
>>> @@ -47,7 +46,7 @@
>>>  		.dirty_bitmap_size = log_size,
>>>  	};
>>>  	struct mlx5_vdpa_query_mr *mr = rte_malloc(__func__,
>> sizeof(*mr), 0);
>>> -	struct mlx5_vdpa_virtq *virtq;
>>> +	int i;
>>>
>>>  	if (!mr) {
>>>  		DRV_LOG(ERR, "Failed to allocate mem for lm mr."); @@ -
>> 67,11 +66,10
>>> @@
>>>  		goto err;
>>>  	}
>>>  	attr.dirty_bitmap_mkey = mr->mkey->id;
>>> -	SLIST_FOREACH(virtq, &priv->virtq_list, next) {
>>> -		attr.queue_index = virtq->index;
>>> -		if (mlx5_devx_cmd_modify_virtq(virtq->virtq, &attr)) {
>>> -			DRV_LOG(ERR, "Failed to modify virtq %d for lm.",
>>> -				virtq->index);
>>> +	for (i = 0; i < priv->nr_virtqs; ++i) {
>>> +		attr.queue_index = i;
>>> +		if (mlx5_devx_cmd_modify_virtq(priv->virtqs[i].virtq, &attr))
>> {
>>> +			DRV_LOG(ERR, "Failed to modify virtq %d for lm.", i);
>>>  			goto err;
>>>  		}
>>>  	}
>>> @@ -94,9 +92,9 @@
>>>  mlx5_vdpa_lm_log(struct mlx5_vdpa_priv *priv)  {
>>>  	struct mlx5_devx_virtq_attr attr = {0};
>>> -	struct mlx5_vdpa_virtq *virtq;
>>>  	uint64_t features;
>>>  	int ret = rte_vhost_get_negotiated_features(priv->vid, &features);
>>> +	int i;
>>>
>>>  	if (ret) {
>>>  		DRV_LOG(ERR, "Failed to get negotiated features."); @@ -
>> 104,27
>>> +102,26 @@
>>>  	}
>>>  	if (!RTE_VHOST_NEED_LOG(features))
>>>  		return 0;
>>> -	SLIST_FOREACH(virtq, &priv->virtq_list, next) {
>>> -		ret = mlx5_vdpa_virtq_modify(virtq, 0);
>>> +	for (i = 0; i < priv->nr_virtqs; ++i) {
>>> +		ret = mlx5_vdpa_virtq_modify(&priv->virtqs[i], 0);
>>>  		if (ret)
>>>  			return -1;
>>> -		if (mlx5_devx_cmd_query_virtq(virtq->virtq, &attr)) {
>>> -			DRV_LOG(ERR, "Failed to query virtq %d.", virtq-
>>> index);
>>> +		if (mlx5_devx_cmd_query_virtq(priv->virtqs[i].virtq, &attr)) {
>>> +			DRV_LOG(ERR, "Failed to query virtq %d.", i);
>>>  			return -1;
>>>  		}
>>>  		DRV_LOG(INFO, "Query vid %d vring %d:
>> hw_available_idx=%d, "
>>> -			"hw_used_index=%d", priv->vid, virtq->index,
>>> +			"hw_used_index=%d", priv->vid, i,
>>>  			attr.hw_available_index, attr.hw_used_index);
>>> -		ret = rte_vhost_set_vring_base(priv->vid, virtq->index,
>>> +		ret = rte_vhost_set_vring_base(priv->vid, i,
>>>  					       attr.hw_available_index,
>>>  					       attr.hw_used_index);
>>>  		if (ret) {
>>> -			DRV_LOG(ERR, "Failed to set virtq %d base.",
>>> -				virtq->index);
>>> +			DRV_LOG(ERR, "Failed to set virtq %d base.", i);
>>>  			return -1;
>>>  		}
>>> -		rte_vhost_log_used_vring(priv->vid, virtq->index, 0,
>>> -				       MLX5_VDPA_USED_RING_LEN(virtq-
>>> vq_size));
>>> +		rte_vhost_log_used_vring(priv->vid, i, 0,
>>> +			      MLX5_VDPA_USED_RING_LEN(priv-
>>> virtqs[i].vq_size));
>>>  	}
>>>  	return 0;
>>>  }
>>> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_steer.c
>>> b/drivers/vdpa/mlx5/mlx5_vdpa_steer.c
>>> index 9c11452..96ffc21 100644
>>> --- a/drivers/vdpa/mlx5/mlx5_vdpa_steer.c
>>> +++ b/drivers/vdpa/mlx5/mlx5_vdpa_steer.c
>>> @@ -76,13 +76,13 @@
>>>  static int
>>>  mlx5_vdpa_rqt_prepare(struct mlx5_vdpa_priv *priv)  {
>>> -	struct mlx5_vdpa_virtq *virtq;
>>> +	int i;
>>>  	uint32_t rqt_n = RTE_MIN(MLX5_VDPA_DEFAULT_RQT_SIZE,
>>>  				 1 << priv->log_max_rqt_size);
>>>  	struct mlx5_devx_rqt_attr *attr = rte_zmalloc(__func__,
>> sizeof(*attr)
>>>  						      + rqt_n *
>>>  						      sizeof(uint32_t), 0);
>>> -	uint32_t i = 0, j;
>>> +	uint32_t k = 0, j;
>>>  	int ret = 0;
>>>
>>>  	if (!attr) {
>>> @@ -90,15 +90,15 @@
>>>  		rte_errno = ENOMEM;
>>>  		return -ENOMEM;
>>>  	}
>>> -	SLIST_FOREACH(virtq, &priv->virtq_list, next) {
>>> -		if (is_virtq_recvq(virtq->index, priv->nr_virtqs) &&
>>> -		    virtq->enable) {
>>> -			attr->rq_list[i] = virtq->virtq->id;
>>> -			i++;
>>> +	for (i = 0; i < priv->nr_virtqs; i++) {
>>> +		if (is_virtq_recvq(i, priv->nr_virtqs) &&
>>> +		    priv->virtqs[i].enable) {
>>> +			attr->rq_list[k] = priv->virtqs[i].virtq->id;
>>> +			k++;
>>>  		}
>>>  	}
>>> -	for (j = 0; i != rqt_n; ++i, ++j)
>>> -		attr->rq_list[i] = attr->rq_list[j];
>>> +	for (j = 0; k != rqt_n; ++k, ++j)
>>> +		attr->rq_list[k] = attr->rq_list[j];
>>>  	attr->rq_type = MLX5_INLINE_Q_TYPE_VIRTQ;
>>>  	attr->rqt_max_size = rqt_n;
>>>  	attr->rqt_actual_size = rqt_n;
>>> diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_virtq.c
>>> b/drivers/vdpa/mlx5/mlx5_vdpa_virtq.c
>>> index 8bebb92..3575272 100644
>>> --- a/drivers/vdpa/mlx5/mlx5_vdpa_virtq.c
>>> +++ b/drivers/vdpa/mlx5/mlx5_vdpa_virtq.c
>>> @@ -59,12 +59,9 @@
>>>  				usleep(MLX5_VDPA_INTR_RETRIES_USEC);
>>>  			}
>>>  		}
>>> -		virtq->intr_handle.fd = -1;
>>>  	}
>>> -	if (virtq->virtq) {
>>> +	if (virtq->virtq)
>>>  		claim_zero(mlx5_devx_cmd_destroy(virtq->virtq));
>>> -		virtq->virtq = NULL;
>>> -	}
>>>  	for (i = 0; i < RTE_DIM(virtq->umems); ++i) {
>>>  		if (virtq->umems[i].obj)
>>>  			claim_zero(mlx5_glue->devx_umem_dereg
>>> @@ -72,27 +69,20 @@
>>>  		if (virtq->umems[i].buf)
>>>  			rte_free(virtq->umems[i].buf);
>>>  	}
>>> -	memset(&virtq->umems, 0, sizeof(virtq->umems));
>>>  	if (virtq->eqp.fw_qp)
>>>  		mlx5_vdpa_event_qp_destroy(&virtq->eqp);
>>> +	memset(virtq, 0, sizeof(*virtq));
>>> +	virtq->intr_handle.fd = -1;
>>>  	return 0;
>>>  }
>>>
>>>  void
>>>  mlx5_vdpa_virtqs_release(struct mlx5_vdpa_priv *priv)  {
>>> -	struct mlx5_vdpa_virtq *entry;
>>> -	struct mlx5_vdpa_virtq *next;
>>> +	int i;
>>>
>>> -	entry = SLIST_FIRST(&priv->virtq_list);
>>> -	while (entry) {
>>> -		next = SLIST_NEXT(entry, next);
>>> -		mlx5_vdpa_virtq_unset(entry);
>>> -		SLIST_REMOVE(&priv->virtq_list, entry, mlx5_vdpa_virtq,
>> next);
>>> -		rte_free(entry);
>>> -		entry = next;
>>> -	}
>>> -	SLIST_INIT(&priv->virtq_list);
>>> +	for (i = 0; i < priv->nr_virtqs; i++)
>>> +		mlx5_vdpa_virtq_unset(&priv->virtqs[i]);
>>>  	if (priv->tis) {
>>>  		claim_zero(mlx5_devx_cmd_destroy(priv->tis));
>>>  		priv->tis = NULL;
>>> @@ -106,6 +96,7 @@
>>>  		priv->virtq_db_addr = NULL;
>>>  	}
>>>  	priv->features = 0;
>>> +	priv->nr_virtqs = 0;
>>>  }
>>>
>>>  int
>>> @@ -140,9 +131,9 @@
>>>  }
>>>
>>>  static int
>>> -mlx5_vdpa_virtq_setup(struct mlx5_vdpa_priv *priv,
>>> -		      struct mlx5_vdpa_virtq *virtq, int index)
>>> +mlx5_vdpa_virtq_setup(struct mlx5_vdpa_priv *priv, int index)
>>>  {
>>> +	struct mlx5_vdpa_virtq *virtq = &priv->virtqs[index];
>>>  	struct rte_vhost_vring vq;
>>>  	struct mlx5_devx_virtq_attr attr = {0};
>>>  	uint64_t gpa;
>>> @@ -340,7 +331,6 @@
>>>  mlx5_vdpa_virtqs_prepare(struct mlx5_vdpa_priv *priv)  {
>>>  	struct mlx5_devx_tis_attr tis_attr = {0};
>>> -	struct mlx5_vdpa_virtq *virtq;
>>>  	uint32_t i;
>>>  	uint16_t nr_vring = rte_vhost_get_vring_num(priv->vid);
>>>  	int ret = rte_vhost_get_negotiated_features(priv->vid,
>>> &priv->features); @@ -349,6 +339,12 @@
>>>  		DRV_LOG(ERR, "Failed to configure negotiated features.");
>>>  		return -1;
>>>  	}
>>> +	if (nr_vring > priv->caps.max_num_virtio_queues * 2) {
>>> +		DRV_LOG(ERR, "Do not support more than %d virtqs(%d).",
>>> +			(int)priv->caps.max_num_virtio_queues * 2,
>>> +			(int)nr_vring);
>>> +		return -E2BIG;
>>
>> All returns in thid function are either -1 or 0 except this one, so it looks
>> inconsistent.
> You can find the consistent in negative values for error.
> If you insist and this is your only concern here, I agree to change to -1.
> Can it be done in integration? 

Yes, I can/will do it when applying the patch.
Wanted you green light before proceeding.

Thanks,
Maxime
> 
>>
>>> +	}
>>>  	/* Always map the entire page. */
>>>  	priv->virtq_db_addr = mmap(NULL, priv->var->length, PROT_READ |
>>>  				   PROT_WRITE, MAP_SHARED, priv->ctx-
>>> cmd_fd, @@ -372,16 +368,10
>>> @@
>>>  		DRV_LOG(ERR, "Failed to create TIS.");
>>>  		goto error;
>>>  	}
>>> -	for (i = 0; i < nr_vring; i++) {
>>> -		virtq = rte_zmalloc(__func__, sizeof(*virtq), 0);
>>> -		if (!virtq || mlx5_vdpa_virtq_setup(priv, virtq, i)) {
>>> -			if (virtq)
>>> -				rte_free(virtq);
>>> -			goto error;
>>> -		}
>>> -		SLIST_INSERT_HEAD(&priv->virtq_list, virtq, next);
>>> -	}
>>>  	priv->nr_virtqs = nr_vring;
>>> +	for (i = 0; i < nr_vring; i++)
>>> +		if (mlx5_vdpa_virtq_setup(priv, i))
>>> +			goto error;
>>>  	return 0;
>>>  error:
>>>  	mlx5_vdpa_virtqs_release(priv);
>>>
>