[dpdk-dev] [PATCH v3 02/11] net/igc: support device initialization

alvinx.zhang at intel.com alvinx.zhang at intel.com
Mon Apr 13 08:30:28 CEST 2020


From: Alvin Zhang <alvinx.zhang at intel.com>

Update base share codes, add readme.
Add OS specific functions and definitions.
Add device initialization codes.

Signed-off-by: Alvin Zhang <alvinx.zhang at intel.com>

v2:
- Modify codes according to comments.
- Fix share codes style issues.
- Merge patch[03] "add device initialization" into patch[02] "update
  base share codes", which is more reasonable.
- Update the release notes.
---
 drivers/net/igc/Makefile           |   12 +
 drivers/net/igc/base/README        |   29 +
 drivers/net/igc/base/igc_82571.h   |   36 +
 drivers/net/igc/base/igc_82575.h   |  351 +++
 drivers/net/igc/base/igc_api.c     | 1845 +++++++++++++++
 drivers/net/igc/base/igc_api.h     |  111 +
 drivers/net/igc/base/igc_base.c    |  190 ++
 drivers/net/igc/base/igc_base.h    |  127 ++
 drivers/net/igc/base/igc_defines.h | 1649 ++++++++++++++
 drivers/net/igc/base/igc_hw.h      | 1051 +++++++++
 drivers/net/igc/base/igc_i225.c    | 1378 +++++++++++
 drivers/net/igc/base/igc_i225.h    |  110 +
 drivers/net/igc/base/igc_ich8lan.h |  296 +++
 drivers/net/igc/base/igc_mac.c     | 2100 +++++++++++++++++
 drivers/net/igc/base/igc_mac.h     |   64 +
 drivers/net/igc/base/igc_manage.c  |  547 +++++
 drivers/net/igc/base/igc_manage.h  |   65 +
 drivers/net/igc/base/igc_nvm.c     | 1324 +++++++++++
 drivers/net/igc/base/igc_nvm.h     |   69 +
 drivers/net/igc/base/igc_osdep.c   |   64 +
 drivers/net/igc/base/igc_osdep.h   |  163 ++
 drivers/net/igc/base/igc_phy.c     | 4422 ++++++++++++++++++++++++++++++++++++
 drivers/net/igc/base/igc_phy.h     |  337 +++
 drivers/net/igc/base/igc_regs.h    |  724 ++++++
 drivers/net/igc/base/meson.build   |   18 +
 drivers/net/igc/igc_ethdev.c       |  266 ++-
 drivers/net/igc/igc_ethdev.h       |   19 +
 drivers/net/igc/meson.build        |    5 +
 28 files changed, 17362 insertions(+), 10 deletions(-)
 create mode 100644 drivers/net/igc/base/README
 create mode 100644 drivers/net/igc/base/igc_82571.h
 create mode 100644 drivers/net/igc/base/igc_82575.h
 create mode 100644 drivers/net/igc/base/igc_api.c
 create mode 100644 drivers/net/igc/base/igc_api.h
 create mode 100644 drivers/net/igc/base/igc_base.c
 create mode 100644 drivers/net/igc/base/igc_base.h
 create mode 100644 drivers/net/igc/base/igc_defines.h
 create mode 100644 drivers/net/igc/base/igc_hw.h
 create mode 100644 drivers/net/igc/base/igc_i225.c
 create mode 100644 drivers/net/igc/base/igc_i225.h
 create mode 100644 drivers/net/igc/base/igc_ich8lan.h
 create mode 100644 drivers/net/igc/base/igc_mac.c
 create mode 100644 drivers/net/igc/base/igc_mac.h
 create mode 100644 drivers/net/igc/base/igc_manage.c
 create mode 100644 drivers/net/igc/base/igc_manage.h
 create mode 100644 drivers/net/igc/base/igc_nvm.c
 create mode 100644 drivers/net/igc/base/igc_nvm.h
 create mode 100644 drivers/net/igc/base/igc_osdep.c
 create mode 100644 drivers/net/igc/base/igc_osdep.h
 create mode 100644 drivers/net/igc/base/igc_phy.c
 create mode 100644 drivers/net/igc/base/igc_phy.h
 create mode 100644 drivers/net/igc/base/igc_regs.h
 create mode 100644 drivers/net/igc/base/meson.build

diff --git a/drivers/net/igc/Makefile b/drivers/net/igc/Makefile
index ee1d8d8..0902811 100644
--- a/drivers/net/igc/Makefile
+++ b/drivers/net/igc/Makefile
@@ -13,12 +13,24 @@ CFLAGS += $(WERROR_FLAGS)
 LDLIBS += -lrte_eal
 LDLIBS += -lrte_ethdev
 LDLIBS += -lrte_bus_pci
+LDLIBS += -lrte_mbuf
+LDLIBS += -lrte_mempool
 
 EXPORT_MAP := rte_pmd_igc_version.map
 
+VPATH += $(SRCDIR)/base
+
 #
 # all source are stored in SRCS-y
 #
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_api.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_base.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_i225.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_mac.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_manage.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_nvm.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_osdep.c
+SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_phy.c
 SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_logs.c
 SRCS-$(CONFIG_RTE_LIBRTE_IGC_PMD) += igc_ethdev.c
 
diff --git a/drivers/net/igc/base/README b/drivers/net/igc/base/README
new file mode 100644
index 0000000..0ff8307
--- /dev/null
+++ b/drivers/net/igc/base/README
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+Intel® IGC driver
+==================
+
+This directory contains source code of FreeBSD igc driver of version
+2019.10.18 released by the team which develops basic drivers for any
+i225 NIC.
+The directory of base/ contains the original source package.
+This driver is valid for the product(s) listed below
+
+* Intel® Ethernet Network Adapters I225
+
+Updating the driver
+===================
+
+NOTE:
+- To avoid namespace issues with e1000 PMD, all prefix e1000_ or E1000_
+of the definition, macro and file names ware replaced with igc_ or IGC_.
+- Since some codes are not required, they have been removed from the
+base codes, such as the I350 and I210 series NICs related codes.
+- Some registers are used by the base codes but not defined in the base
+codes, so they ware added to them.
+- OS and DPDK specified definitions and macros ware added in following
+files:
+  igc_osdep.h
+  igc_osdep.c
diff --git a/drivers/net/igc/base/igc_82571.h b/drivers/net/igc/base/igc_82571.h
new file mode 100644
index 0000000..6d1f8ac
--- /dev/null
+++ b/drivers/net/igc/base/igc_82571.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_82571_H_
+#define _IGC_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define IGC_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5 /* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define IGC_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define IGC_EIAC_82574	0x000DC /* Ext. Interrupt Auto Clear - RW */
+#define IGC_EIAC_MASK_82574	0x01F00000
+
+#define IGC_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define IGC_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define IGC_BASE1000T_STATUS		10
+#define IGC_IDLE_ERROR_COUNT_MASK	0xFF
+#define IGC_RECEIVE_ERROR_COUNTER	21
+#define IGC_RECEIVE_ERROR_MAX		0xFFFF
+bool igc_check_phy_82574(struct igc_hw *hw);
+bool igc_get_laa_state_82571(struct igc_hw *hw);
+void igc_set_laa_state_82571(struct igc_hw *hw, bool state);
+
+#endif
diff --git a/drivers/net/igc/base/igc_82575.h b/drivers/net/igc/base/igc_82575.h
new file mode 100644
index 0000000..9cd74cf
--- /dev/null
+++ b/drivers/net/igc/base/igc_82575.h
@@ -0,0 +1,351 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_82575_H_
+#define _IGC_82575_H_
+
+#define ID_LED_DEFAULT_82575_SERDES	((ID_LED_DEF1_DEF2 << 12) | \
+					 (ID_LED_DEF1_DEF2 <<  8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_ON2))
+/*
+ * Receive Address Register Count
+ * Number of high/low register pairs in the RAR.  The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * These entries are also used for MAC-based filtering.
+ */
+/*
+ * For 82576, there are an additional set of RARs that begin at an offset
+ * separate from the first set of RARs.
+ */
+#define IGC_RAR_ENTRIES_82575	16
+#define IGC_RAR_ENTRIES_82576	24
+#define IGC_RAR_ENTRIES_82580	24
+#define IGC_RAR_ENTRIES_I350	32
+#define IGC_SW_SYNCH_MB	0x00000100
+#define IGC_STAT_DEV_RST_SET	0x00100000
+
+struct igc_adv_data_desc {
+	__le64 buffer_addr;    /* Address of the descriptor's data buffer */
+	union {
+		u32 data;
+		struct {
+			u32 datalen:16; /* Data buffer length */
+			u32 rsvd:4;
+			u32 dtyp:4;  /* Descriptor type */
+			u32 dcmd:8;  /* Descriptor command */
+		} config;
+	} lower;
+	union {
+		u32 data;
+		struct {
+			u32 status:4;  /* Descriptor status */
+			u32 idx:4;
+			u32 popts:6;  /* Packet Options */
+			u32 paylen:18; /* Payload length */
+		} options;
+	} upper;
+};
+
+#define IGC_TXD_DTYP_ADV_C	0x2  /* Advanced Context Descriptor */
+#define IGC_TXD_DTYP_ADV_D	0x3  /* Advanced Data Descriptor */
+#define IGC_ADV_TXD_CMD_DEXT	0x20 /* Descriptor extension (0 = legacy) */
+#define IGC_ADV_TUCMD_IPV4	0x2  /* IP Packet Type: 1=IPv4 */
+#define IGC_ADV_TUCMD_IPV6	0x0  /* IP Packet Type: 0=IPv6 */
+#define IGC_ADV_TUCMD_L4T_UDP	0x0  /* L4 Packet TYPE of UDP */
+#define IGC_ADV_TUCMD_L4T_TCP	0x4  /* L4 Packet TYPE of TCP */
+#define IGC_ADV_TUCMD_MKRREQ	0x10 /* Indicates markers are required */
+#define IGC_ADV_DCMD_EOP	0x1  /* End of Packet */
+#define IGC_ADV_DCMD_IFCS	0x2  /* Insert FCS (Ethernet CRC) */
+#define IGC_ADV_DCMD_RS	0x8  /* Report Status */
+#define IGC_ADV_DCMD_VLE	0x40 /* Add VLAN tag */
+#define IGC_ADV_DCMD_TSE	0x80 /* TCP Seg enable */
+/* Extended Device Control */
+#define IGC_CTRL_EXT_NSICR	0x00000001 /* Disable Intr Clear all on read */
+
+struct igc_adv_context_desc {
+	union {
+		u32 ip_config;
+		struct {
+			u32 iplen:9;
+			u32 maclen:7;
+			u32 vlan_tag:16;
+		} fields;
+	} ip_setup;
+	u32 seq_num;
+	union {
+		u64 l4_config;
+		struct {
+			u32 mkrloc:9;
+			u32 tucmd:11;
+			u32 dtyp:4;
+			u32 adv:8;
+			u32 rsvd:4;
+			u32 idx:4;
+			u32 l4len:8;
+			u32 mss:16;
+		} fields;
+	} l4_setup;
+};
+
+/* SRRCTL bit definitions */
+#define IGC_SRRCTL_BSIZEHDRSIZE_MASK		0x00000F00
+#define IGC_SRRCTL_DESCTYPE_LEGACY		0x00000000
+#define IGC_SRRCTL_DESCTYPE_HDR_SPLIT		0x04000000
+#define IGC_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS	0x0A000000
+#define IGC_SRRCTL_DESCTYPE_HDR_REPLICATION	0x06000000
+#define IGC_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IGC_SRRCTL_DESCTYPE_MASK		0x0E000000
+#define IGC_SRRCTL_TIMESTAMP			0x40000000
+#define IGC_SRRCTL_DROP_EN			0x80000000
+
+#define IGC_SRRCTL_BSIZEPKT_MASK		0x0000007F
+#define IGC_SRRCTL_BSIZEHDR_MASK		0x00003F00
+
+#define IGC_TX_HEAD_WB_ENABLE		0x1
+#define IGC_TX_SEQNUM_WB_ENABLE	0x2
+
+#define IGC_MRQC_ENABLE_RSS_4Q		0x00000002
+#define IGC_MRQC_ENABLE_VMDQ			0x00000003
+#define IGC_MRQC_ENABLE_VMDQ_RSS_2Q		0x00000005
+#define IGC_MRQC_RSS_FIELD_IPV4_UDP		0x00400000
+#define IGC_MRQC_RSS_FIELD_IPV6_UDP		0x00800000
+#define IGC_MRQC_RSS_FIELD_IPV6_UDP_EX	0x01000000
+#define IGC_MRQC_ENABLE_RSS_8Q		0x00000002
+
+#define IGC_VMRCTL_MIRROR_PORT_SHIFT		8
+#define IGC_VMRCTL_MIRROR_DSTPORT_MASK	(7 << \
+						 IGC_VMRCTL_MIRROR_PORT_SHIFT)
+#define IGC_VMRCTL_POOL_MIRROR_ENABLE		(1 << 0)
+#define IGC_VMRCTL_UPLINK_MIRROR_ENABLE	(1 << 1)
+#define IGC_VMRCTL_DOWNLINK_MIRROR_ENABLE	(1 << 2)
+
+#define IGC_EICR_TX_QUEUE ( \
+	IGC_EICR_TX_QUEUE0 |    \
+	IGC_EICR_TX_QUEUE1 |    \
+	IGC_EICR_TX_QUEUE2 |    \
+	IGC_EICR_TX_QUEUE3)
+
+#define IGC_EICR_RX_QUEUE ( \
+	IGC_EICR_RX_QUEUE0 |    \
+	IGC_EICR_RX_QUEUE1 |    \
+	IGC_EICR_RX_QUEUE2 |    \
+	IGC_EICR_RX_QUEUE3)
+
+#define IGC_EIMS_RX_QUEUE	IGC_EICR_RX_QUEUE
+#define IGC_EIMS_TX_QUEUE	IGC_EICR_TX_QUEUE
+
+#define EIMS_ENABLE_MASK ( \
+	IGC_EIMS_RX_QUEUE  | \
+	IGC_EIMS_TX_QUEUE  | \
+	IGC_EIMS_TCP_TIMER | \
+	IGC_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IGC_IMIR_PORT_IM_EN	0x00010000  /* TCP port enable */
+#define IGC_IMIR_PORT_BP	0x00020000  /* TCP port check bypass */
+#define IGC_IMIREXT_CTRL_URG	0x00002000  /* Check URG bit in header */
+#define IGC_IMIREXT_CTRL_ACK	0x00004000  /* Check ACK bit in header */
+#define IGC_IMIREXT_CTRL_PSH	0x00008000  /* Check PSH bit in header */
+#define IGC_IMIREXT_CTRL_RST	0x00010000  /* Check RST bit in header */
+#define IGC_IMIREXT_CTRL_SYN	0x00020000  /* Check SYN bit in header */
+#define IGC_IMIREXT_CTRL_FIN	0x00040000  /* Check FIN bit in header */
+
+#define IGC_RXDADV_RSSTYPE_MASK	0x0000000F
+#define IGC_RXDADV_RSSTYPE_SHIFT	12
+#define IGC_RXDADV_HDRBUFLEN_MASK	0x7FE0
+#define IGC_RXDADV_HDRBUFLEN_SHIFT	5
+#define IGC_RXDADV_SPLITHEADER_EN	0x00001000
+#define IGC_RXDADV_SPH		0x8000
+#define IGC_RXDADV_STAT_TS		0x10000 /* Pkt was time stamped */
+#define IGC_RXDADV_ERR_HBO		0x00800000
+
+/* RSS Hash results */
+#define IGC_RXDADV_RSSTYPE_NONE	0x00000000
+#define IGC_RXDADV_RSSTYPE_IPV4_TCP	0x00000001
+#define IGC_RXDADV_RSSTYPE_IPV4	0x00000002
+#define IGC_RXDADV_RSSTYPE_IPV6_TCP	0x00000003
+#define IGC_RXDADV_RSSTYPE_IPV6_EX	0x00000004
+#define IGC_RXDADV_RSSTYPE_IPV6	0x00000005
+#define IGC_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IGC_RXDADV_RSSTYPE_IPV4_UDP	0x00000007
+#define IGC_RXDADV_RSSTYPE_IPV6_UDP	0x00000008
+#define IGC_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor */
+#define IGC_RXDADV_PKTTYPE_ILMASK	0x000000F0
+#define IGC_RXDADV_PKTTYPE_TLMASK	0x00000F00
+#define IGC_RXDADV_PKTTYPE_NONE	0x00000000
+#define IGC_RXDADV_PKTTYPE_IPV4	0x00000010 /* IPV4 hdr present */
+#define IGC_RXDADV_PKTTYPE_IPV4_EX	0x00000020 /* IPV4 hdr + extensions */
+#define IGC_RXDADV_PKTTYPE_IPV6	0x00000040 /* IPV6 hdr present */
+#define IGC_RXDADV_PKTTYPE_IPV6_EX	0x00000080 /* IPV6 hdr + extensions */
+#define IGC_RXDADV_PKTTYPE_TCP	0x00000100 /* TCP hdr present */
+#define IGC_RXDADV_PKTTYPE_UDP	0x00000200 /* UDP hdr present */
+#define IGC_RXDADV_PKTTYPE_SCTP	0x00000400 /* SCTP hdr present */
+#define IGC_RXDADV_PKTTYPE_NFS	0x00000800 /* NFS hdr present */
+
+#define IGC_RXDADV_PKTTYPE_IPSEC_ESP	0x00001000 /* IPSec ESP */
+#define IGC_RXDADV_PKTTYPE_IPSEC_AH	0x00002000 /* IPSec AH */
+#define IGC_RXDADV_PKTTYPE_LINKSEC	0x00004000 /* LinkSec Encap */
+#define IGC_RXDADV_PKTTYPE_ETQF	0x00008000 /* PKTTYPE is ETQF index */
+#define IGC_RXDADV_PKTTYPE_ETQF_MASK	0x00000070 /* ETQF has 8 indices */
+#define IGC_RXDADV_PKTTYPE_ETQF_SHIFT	4 /* Right-shift 4 bits */
+
+/* LinkSec results */
+/* Security Processing bit Indication */
+#define IGC_RXDADV_LNKSEC_STATUS_SECP		0x00020000
+#define IGC_RXDADV_LNKSEC_ERROR_BIT_MASK	0x18000000
+#define IGC_RXDADV_LNKSEC_ERROR_NO_SA_MATCH	0x08000000
+#define IGC_RXDADV_LNKSEC_ERROR_REPLAY_ERROR	0x10000000
+#define IGC_RXDADV_LNKSEC_ERROR_BAD_SIG	0x18000000
+
+#define IGC_RXDADV_IPSEC_STATUS_SECP			0x00020000
+#define IGC_RXDADV_IPSEC_ERROR_BIT_MASK		0x18000000
+#define IGC_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL	0x08000000
+#define IGC_RXDADV_IPSEC_ERROR_INVALID_LENGTH		0x10000000
+#define IGC_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED	0x18000000
+
+#define IGC_TXDCTL_SWFLSH		0x04000000 /* Tx Desc. wbk flushing */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+#define IGC_TXDCTL_PRIORITY		0x08000000
+
+#define IGC_RXDCTL_SWFLSH		0x04000000 /* Rx Desc. wbk flushing */
+
+/* Direct Cache Access (DCA) definitions */
+#define IGC_DCA_CTRL_DCA_ENABLE	0x00000000 /* DCA Enable */
+#define IGC_DCA_CTRL_DCA_DISABLE	0x00000001 /* DCA Disable */
+
+#define IGC_DCA_CTRL_DCA_MODE_CB1	0x00 /* DCA Mode CB1 */
+#define IGC_DCA_CTRL_DCA_MODE_CB2	0x02 /* DCA Mode CB2 */
+
+#define IGC_DCA_RXCTRL_CPUID_MASK	0x0000001F /* Rx CPUID Mask */
+#define IGC_DCA_RXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Rx Desc enable */
+#define IGC_DCA_RXCTRL_HEAD_DCA_EN	(1 << 6) /* DCA Rx Desc header ena */
+#define IGC_DCA_RXCTRL_DATA_DCA_EN	(1 << 7) /* DCA Rx Desc payload ena */
+#define IGC_DCA_RXCTRL_DESC_RRO_EN	(1 << 9) /* DCA Rx Desc Relax Order */
+
+#define IGC_DCA_TXCTRL_CPUID_MASK	0x0000001F /* Tx CPUID Mask */
+#define IGC_DCA_TXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Tx Desc enable */
+#define IGC_DCA_TXCTRL_DESC_RRO_EN	(1 << 9) /* Tx rd Desc Relax Order */
+#define IGC_DCA_TXCTRL_TX_WB_RO_EN	(1 << 11) /* Tx Desc writeback RO bit */
+#define IGC_DCA_TXCTRL_DATA_RRO_EN	(1 << 13) /* Tx rd data Relax Order */
+
+#define IGC_DCA_TXCTRL_CPUID_MASK_82576	0xFF000000 /* Tx CPUID Mask */
+#define IGC_DCA_RXCTRL_CPUID_MASK_82576	0xFF000000 /* Rx CPUID Mask */
+#define IGC_DCA_TXCTRL_CPUID_SHIFT_82576	24 /* Tx CPUID */
+#define IGC_DCA_RXCTRL_CPUID_SHIFT_82576	24 /* Rx CPUID */
+
+/* Additional interrupt register bit definitions */
+#define IGC_ICR_LSECPNS	0x00000020 /* PN threshold - server */
+#define IGC_IMS_LSECPNS	IGC_ICR_LSECPNS /* PN threshold - server */
+#define IGC_ICS_LSECPNS	IGC_ICR_LSECPNS /* PN threshold - server */
+
+/* ETQF register bit definitions */
+#define IGC_ETQF_FILTER_ENABLE	(1 << 26)
+#define IGC_ETQF_IMM_INT		(1 << 29)
+#define IGC_ETQF_QUEUE_ENABLE		(1 << 31)
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ *                   to avoid filter collisions later. Add new filters
+ *                   here!!
+ *
+ * Current filters:
+ *    EAPOL 802.1x (0x888e): Filter 0
+ */
+#define IGC_ETQF_FILTER_EAPOL		0
+
+#define IGC_FTQF_MASK_SOURCE_ADDR_BP	0x20000000
+#define IGC_FTQF_MASK_DEST_ADDR_BP	0x40000000
+#define IGC_FTQF_MASK_SOURCE_PORT_BP	0x80000000
+
+#define IGC_NVM_APME_82575		0x0400
+#define MAX_NUM_VFS			7
+
+#define IGC_DTXSWC_MAC_SPOOF_MASK	0x000000FF /* Per VF MAC spoof cntrl */
+#define IGC_DTXSWC_VLAN_SPOOF_MASK	0x0000FF00 /* Per VF VLAN spoof cntrl */
+#define IGC_DTXSWC_LLE_MASK		0x00FF0000 /* Per VF Local LB enables */
+#define IGC_DTXSWC_VLAN_SPOOF_SHIFT	8
+#define IGC_DTXSWC_LLE_SHIFT		16
+#define IGC_DTXSWC_VMDQ_LOOPBACK_EN	(1 << 31)  /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define IGC_VT_CTL_DEFAULT_POOL_SHIFT	7
+#define IGC_VT_CTL_DEFAULT_POOL_MASK	(0x7 << IGC_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define IGC_VT_CTL_IGNORE_MAC		(1 << 28)
+#define IGC_VT_CTL_DISABLE_DEF_POOL	(1 << 29)
+#define IGC_VT_CTL_VM_REPL_EN		(1 << 30)
+
+/* Per VM Offload register setup */
+#define IGC_VMOLR_RLPML_MASK	0x00003FFF /* Long Packet Maximum Length mask */
+#define IGC_VMOLR_LPE		0x00010000 /* Accept Long packet */
+#define IGC_VMOLR_RSSE	0x00020000 /* Enable RSS */
+#define IGC_VMOLR_AUPE	0x01000000 /* Accept untagged packets */
+#define IGC_VMOLR_ROMPE	0x02000000 /* Accept overflow multicast */
+#define IGC_VMOLR_ROPE	0x04000000 /* Accept overflow unicast */
+#define IGC_VMOLR_BAM		0x08000000 /* Accept Broadcast packets */
+#define IGC_VMOLR_MPME	0x10000000 /* Multicast promiscuous mode */
+#define IGC_VMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
+#define IGC_VMOLR_STRCRC	0x80000000 /* CRC stripping enable */
+
+#define IGC_VMOLR_VPE		0x00800000 /* VLAN promiscuous enable */
+#define IGC_VMOLR_UPE		0x20000000 /* Unicast promisuous enable */
+#define IGC_DVMOLR_HIDVLAN	0x20000000 /* Vlan hiding enable */
+#define IGC_DVMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
+#define IGC_DVMOLR_STRCRC	0x80000000 /* CRC stripping enable */
+
+#define IGC_PBRWAC_WALPB	0x00000007 /* Wrap around event on LAN Rx PB */
+#define IGC_PBRWAC_PBE	0x00000008 /* Rx packet buffer empty */
+
+#define IGC_VLVF_ARRAY_SIZE		32
+#define IGC_VLVF_VLANID_MASK		0x00000FFF
+#define IGC_VLVF_POOLSEL_SHIFT	12
+#define IGC_VLVF_POOLSEL_MASK		(0xFF << IGC_VLVF_POOLSEL_SHIFT)
+#define IGC_VLVF_LVLAN		0x00100000
+#define IGC_VLVF_VLANID_ENABLE	0x80000000
+
+#define IGC_VMVIR_VLANA_DEFAULT	0x40000000 /* Always use default VLAN */
+#define IGC_VMVIR_VLANA_NEVER		0x80000000 /* Never insert VLAN tag */
+
+#define IGC_VF_INIT_TIMEOUT	200 /* Number of retries to clear RSTI */
+
+#define IGC_IOVCTL		0x05BBC
+#define IGC_IOVCTL_REUSE_VFQ	0x00000001
+
+#define IGC_RPLOLR_STRVLAN	0x40000000
+#define IGC_RPLOLR_STRCRC	0x80000000
+
+#define IGC_TCTL_EXT_COLD	0x000FFC00
+#define IGC_TCTL_EXT_COLD_SHIFT	10
+
+#define IGC_DTXCTL_8023LL	0x0004
+#define IGC_DTXCTL_VLAN_ADDED	0x0008
+#define IGC_DTXCTL_OOS_ENABLE	0x0010
+#define IGC_DTXCTL_MDP_EN	0x0020
+#define IGC_DTXCTL_SPOOF_INT	0x0040
+
+#define IGC_EEPROM_PCS_AUTONEG_DISABLE_BIT	(1 << 14)
+
+#define ALL_QUEUES		0xFFFF
+
+s32 igc_reset_init_script_82575(struct igc_hw *hw);
+s32 igc_init_nvm_params_82575(struct igc_hw *hw);
+
+/* Rx packet buffer size defines */
+#define IGC_RXPBS_SIZE_MASK_82576	0x0000007F
+void igc_vmdq_set_loopback_pf(struct igc_hw *hw, bool enable);
+void igc_vmdq_set_anti_spoofing_pf(struct igc_hw *hw, bool enable, int pf);
+void igc_vmdq_set_replication_pf(struct igc_hw *hw, bool enable);
+
+enum igc_promisc_type {
+	igc_promisc_disabled = 0,   /* all promisc modes disabled */
+	igc_promisc_unicast = 1,    /* unicast promiscuous enabled */
+	igc_promisc_multicast = 2,  /* multicast promiscuous enabled */
+	igc_promisc_enabled = 3,    /* both uni and multicast promisc */
+	igc_num_promisc_types
+};
+
+#endif /* _IGC_82575_H_ */
diff --git a/drivers/net/igc/base/igc_api.c b/drivers/net/igc/base/igc_api.c
new file mode 100644
index 0000000..f5fde35
--- /dev/null
+++ b/drivers/net/igc/base/igc_api.c
@@ -0,0 +1,1845 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+
+/**
+ *  igc_get_i2c_data - Reads the I2C SDA data bit
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ **/
+static bool igc_get_i2c_data(u32 *i2cctl)
+{
+	bool data;
+
+	DEBUGFUNC("igc_get_i2c_data");
+
+	if (*i2cctl & IGC_I2C_DATA_IN)
+		data = 1;
+	else
+		data = 0;
+
+	return data;
+}
+
+/**
+ *  igc_set_i2c_data - Sets the I2C data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *  @data: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ **/
+static s32 igc_set_i2c_data(struct igc_hw *hw, u32 *i2cctl, bool data)
+{
+	s32 status = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_set_i2c_data");
+
+	if (data)
+		*i2cctl |= IGC_I2C_DATA_OUT;
+	else
+		*i2cctl &= ~IGC_I2C_DATA_OUT;
+
+	*i2cctl &= ~IGC_I2C_DATA_OE_N;
+	*i2cctl |= IGC_I2C_CLK_OE_N;
+	IGC_WRITE_REG(hw, IGC_I2CPARAMS, *i2cctl);
+	IGC_WRITE_FLUSH(hw);
+
+	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+	usec_delay(IGC_I2C_T_RISE + IGC_I2C_T_FALL + IGC_I2C_T_SU_DATA);
+
+	*i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+	if (data != igc_get_i2c_data(i2cctl)) {
+		status = IGC_ERR_I2C;
+		DEBUGOUT1("Error - I2C data was not set to %X.\n", data);
+	}
+
+	return status;
+}
+
+/**
+ *  igc_raise_i2c_clk - Raises the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Raises the I2C clock line '0'->'1'
+ **/
+static void igc_raise_i2c_clk(struct igc_hw *hw, u32 *i2cctl)
+{
+	DEBUGFUNC("igc_raise_i2c_clk");
+
+	*i2cctl |= IGC_I2C_CLK_OUT;
+	*i2cctl &= ~IGC_I2C_CLK_OE_N;
+	IGC_WRITE_REG(hw, IGC_I2CPARAMS, *i2cctl);
+	IGC_WRITE_FLUSH(hw);
+
+	/* SCL rise time (1000ns) */
+	usec_delay(IGC_I2C_T_RISE);
+}
+
+/**
+ *  igc_lower_i2c_clk - Lowers the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Lowers the I2C clock line '1'->'0'
+ **/
+static void igc_lower_i2c_clk(struct igc_hw *hw, u32 *i2cctl)
+{
+	DEBUGFUNC("igc_lower_i2c_clk");
+
+	*i2cctl &= ~IGC_I2C_CLK_OUT;
+	*i2cctl &= ~IGC_I2C_CLK_OE_N;
+	IGC_WRITE_REG(hw, IGC_I2CPARAMS, *i2cctl);
+	IGC_WRITE_FLUSH(hw);
+
+	/* SCL fall time (300ns) */
+	usec_delay(IGC_I2C_T_FALL);
+}
+
+/**
+ *  igc_i2c_start - Sets I2C start condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C start condition (High -> Low on SDA while SCL is High)
+ **/
+static void igc_i2c_start(struct igc_hw *hw)
+{
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+
+	DEBUGFUNC("igc_i2c_start");
+
+	/* Start condition must begin with data and clock high */
+	igc_set_i2c_data(hw, &i2cctl, 1);
+	igc_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for start condition (4.7us) */
+	usec_delay(IGC_I2C_T_SU_STA);
+
+	igc_set_i2c_data(hw, &i2cctl, 0);
+
+	/* Hold time for start condition (4us) */
+	usec_delay(IGC_I2C_T_HD_STA);
+
+	igc_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IGC_I2C_T_LOW);
+}
+
+/**
+ *  igc_i2c_stop - Sets I2C stop condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ **/
+static void igc_i2c_stop(struct igc_hw *hw)
+{
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+
+	DEBUGFUNC("igc_i2c_stop");
+
+	/* Stop condition must begin with data low and clock high */
+	igc_set_i2c_data(hw, &i2cctl, 0);
+	igc_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for stop condition (4us) */
+	usec_delay(IGC_I2C_T_SU_STO);
+
+	igc_set_i2c_data(hw, &i2cctl, 1);
+
+	/* bus free time between stop and start (4.7us)*/
+	usec_delay(IGC_I2C_T_BUF);
+}
+
+/**
+ *  igc_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: read data value
+ *
+ *  Clocks in one bit via I2C data/clock
+ **/
+static void igc_clock_in_i2c_bit(struct igc_hw *hw, bool *data)
+{
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+
+	DEBUGFUNC("igc_clock_in_i2c_bit");
+
+	igc_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(IGC_I2C_T_HIGH);
+
+	i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+	*data = igc_get_i2c_data(&i2cctl);
+
+	igc_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IGC_I2C_T_LOW);
+}
+
+/**
+ *  igc_clock_in_i2c_byte - Clocks in one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte to clock in
+ *
+ *  Clocks in one byte data via I2C data/clock
+ **/
+static void igc_clock_in_i2c_byte(struct igc_hw *hw, u8 *data)
+{
+	s32 i;
+	bool bit = 0;
+
+	DEBUGFUNC("igc_clock_in_i2c_byte");
+
+	*data = 0;
+	for (i = 7; i >= 0; i--) {
+		igc_clock_in_i2c_bit(hw, &bit);
+		*data |= bit << i;
+	}
+}
+
+/**
+ *  igc_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: data value to write
+ *
+ *  Clocks out one bit via I2C data/clock
+ **/
+static s32 igc_clock_out_i2c_bit(struct igc_hw *hw, bool data)
+{
+	s32 status;
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+
+	DEBUGFUNC("igc_clock_out_i2c_bit");
+
+	status = igc_set_i2c_data(hw, &i2cctl, data);
+	if (status == IGC_SUCCESS) {
+		igc_raise_i2c_clk(hw, &i2cctl);
+
+		/* Minimum high period of clock is 4us */
+		usec_delay(IGC_I2C_T_HIGH);
+
+		igc_lower_i2c_clk(hw, &i2cctl);
+
+		/* Minimum low period of clock is 4.7 us.
+		 * This also takes care of the data hold time.
+		 */
+		usec_delay(IGC_I2C_T_LOW);
+	} else {
+		status = IGC_ERR_I2C;
+		DEBUGOUT1("I2C data was not set to %X\n", data);
+	}
+
+	return status;
+}
+
+/**
+ *  igc_clock_out_i2c_byte - Clocks out one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte clocked out
+ *
+ *  Clocks out one byte data via I2C data/clock
+ **/
+static s32 igc_clock_out_i2c_byte(struct igc_hw *hw, u8 data)
+{
+	s32 status = IGC_SUCCESS;
+	s32 i;
+	u32 i2cctl;
+	bool bit = 0;
+
+	DEBUGFUNC("igc_clock_out_i2c_byte");
+
+	for (i = 7; i >= 0; i--) {
+		bit = (data >> i) & 0x1;
+		status = igc_clock_out_i2c_bit(hw, bit);
+
+		if (status != IGC_SUCCESS)
+			break;
+	}
+
+	/* Release SDA line (set high) */
+	i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+
+	i2cctl |= IGC_I2C_DATA_OE_N;
+	IGC_WRITE_REG(hw, IGC_I2CPARAMS, i2cctl);
+	IGC_WRITE_FLUSH(hw);
+
+	return status;
+}
+
+/**
+ *  igc_get_i2c_ack - Polls for I2C ACK
+ *  @hw: pointer to hardware structure
+ *
+ *  Clocks in/out one bit via I2C data/clock
+ **/
+static s32 igc_get_i2c_ack(struct igc_hw *hw)
+{
+	s32 status = IGC_SUCCESS;
+	u32 i = 0;
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+	u32 timeout = 10;
+	bool ack = true;
+
+	DEBUGFUNC("igc_get_i2c_ack");
+
+	igc_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	usec_delay(IGC_I2C_T_HIGH);
+
+	/* Wait until SCL returns high */
+	for (i = 0; i < timeout; i++) {
+		usec_delay(1);
+		i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+		if (i2cctl & IGC_I2C_CLK_IN)
+			break;
+	}
+	if (!(i2cctl & IGC_I2C_CLK_IN))
+		return IGC_ERR_I2C;
+
+	ack = igc_get_i2c_data(&i2cctl);
+	if (ack) {
+		DEBUGOUT("I2C ack was not received.\n");
+		status = IGC_ERR_I2C;
+	}
+
+	igc_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	usec_delay(IGC_I2C_T_LOW);
+
+	return status;
+}
+
+/**
+ *  igc_set_i2c_bb - Enable I2C bit-bang
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable I2C bit-bang interface
+ *
+ **/
+s32 igc_set_i2c_bb(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+	u32 ctrl_ext, i2cparams;
+
+	DEBUGFUNC("igc_set_i2c_bb");
+
+	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
+	ctrl_ext |= IGC_CTRL_I2C_ENA;
+	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext);
+	IGC_WRITE_FLUSH(hw);
+
+	i2cparams = IGC_READ_REG(hw, IGC_I2CPARAMS);
+	i2cparams |= IGC_I2CBB_EN;
+	i2cparams |= IGC_I2C_DATA_OE_N;
+	i2cparams |= IGC_I2C_CLK_OE_N;
+	IGC_WRITE_REG(hw, IGC_I2CPARAMS, i2cparams);
+	IGC_WRITE_FLUSH(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_i2c_byte_generic - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
+ *  @data: value read
+ *
+ *  Performs byte read operation over I2C interface at
+ *  a specified device address.
+ **/
+s32 igc_read_i2c_byte_generic(struct igc_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	s32 status = IGC_SUCCESS;
+	u32 max_retry = 10;
+	u32 retry = 1;
+	u16 swfw_mask = 0;
+
+	bool nack = true;
+
+	DEBUGFUNC("igc_read_i2c_byte_generic");
+
+	swfw_mask = IGC_SWFW_PHY0_SM;
+
+	do {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+		    != IGC_SUCCESS) {
+			status = IGC_ERR_SWFW_SYNC;
+			goto read_byte_out;
+		}
+
+		igc_i2c_start(hw);
+
+		/* Device Address and write indication */
+		status = igc_clock_out_i2c_byte(hw, dev_addr);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_clock_out_i2c_byte(hw, byte_offset);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		igc_i2c_start(hw);
+
+		/* Device Address and read indication */
+		status = igc_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		igc_clock_in_i2c_byte(hw, data);
+
+		status = igc_clock_out_i2c_bit(hw, nack);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		igc_i2c_stop(hw);
+		break;
+
+fail:
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		msec_delay(100);
+		igc_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte read error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte read error.\n");
+
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+read_byte_out:
+
+	return status;
+}
+
+/**
+ *  igc_write_i2c_byte_generic - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: value to write
+ *
+ *  Performs byte write operation over I2C interface at
+ *  a specified device address.
+ **/
+s32 igc_write_i2c_byte_generic(struct igc_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	s32 status = IGC_SUCCESS;
+	u32 max_retry = 1;
+	u32 retry = 0;
+	u16 swfw_mask = 0;
+
+	DEBUGFUNC("igc_write_i2c_byte_generic");
+
+	swfw_mask = IGC_SWFW_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != IGC_SUCCESS) {
+		status = IGC_ERR_SWFW_SYNC;
+		goto write_byte_out;
+	}
+
+	do {
+		igc_i2c_start(hw);
+
+		status = igc_clock_out_i2c_byte(hw, dev_addr);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_clock_out_i2c_byte(hw, byte_offset);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_clock_out_i2c_byte(hw, data);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		status = igc_get_i2c_ack(hw);
+		if (status != IGC_SUCCESS)
+			goto fail;
+
+		igc_i2c_stop(hw);
+		break;
+
+fail:
+		igc_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte write error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte write error.\n");
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+write_byte_out:
+
+	return status;
+}
+
+/**
+ *  igc_i2c_bus_clear - Clears the I2C bus
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the I2C bus by sending nine clock pulses.
+ *  Used when data line is stuck low.
+ **/
+void igc_i2c_bus_clear(struct igc_hw *hw)
+{
+	u32 i2cctl = IGC_READ_REG(hw, IGC_I2CPARAMS);
+	u32 i;
+
+	DEBUGFUNC("igc_i2c_bus_clear");
+
+	igc_i2c_start(hw);
+
+	igc_set_i2c_data(hw, &i2cctl, 1);
+
+	for (i = 0; i < 9; i++) {
+		igc_raise_i2c_clk(hw, &i2cctl);
+
+		/* Min high period of clock is 4us */
+		usec_delay(IGC_I2C_T_HIGH);
+
+		igc_lower_i2c_clk(hw, &i2cctl);
+
+		/* Min low period of clock is 4.7us*/
+		usec_delay(IGC_I2C_T_LOW);
+	}
+
+	igc_i2c_start(hw);
+
+	/* Put the i2c bus back to default state */
+	igc_i2c_stop(hw);
+}
+
+/**
+ *  igc_init_mac_params - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the MAC
+ *  set of functions.  Called by drivers or by igc_setup_init_funcs.
+ **/
+s32 igc_init_mac_params(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	if (hw->mac.ops.init_params) {
+		ret_val = hw->mac.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("MAC Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("mac.init_mac_params was NULL\n");
+		ret_val = -IGC_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_init_nvm_params - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the NVM
+ *  set of functions.  Called by drivers or by igc_setup_init_funcs.
+ **/
+s32 igc_init_nvm_params(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	if (hw->nvm.ops.init_params) {
+		ret_val = hw->nvm.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("NVM Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("nvm.init_nvm_params was NULL\n");
+		ret_val = -IGC_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_init_phy_params - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the PHY
+ *  set of functions.  Called by drivers or by igc_setup_init_funcs.
+ **/
+s32 igc_init_phy_params(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	if (hw->phy.ops.init_params) {
+		ret_val = hw->phy.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("PHY Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("phy.init_phy_params was NULL\n");
+		ret_val =  -IGC_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_init_mbx_params - Initialize mailbox function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function initializes the function pointers for the PHY
+ *  set of functions.  Called by drivers or by igc_setup_init_funcs.
+ **/
+s32 igc_init_mbx_params(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	if (hw->mbx.ops.init_params) {
+		ret_val = hw->mbx.ops.init_params(hw);
+		if (ret_val) {
+			DEBUGOUT("Mailbox Initialization Error\n");
+			goto out;
+		}
+	} else {
+		DEBUGOUT("mbx.init_mbx_params was NULL\n");
+		ret_val =  -IGC_ERR_CONFIG;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_set_mac_type - Sets MAC type
+ *  @hw: pointer to the HW structure
+ *
+ *  This function sets the mac type of the adapter based on the
+ *  device ID stored in the hw structure.
+ *  MUST BE FIRST FUNCTION CALLED (explicitly or through
+ *  igc_setup_init_funcs()).
+ **/
+s32 igc_set_mac_type(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_set_mac_type");
+
+	switch (hw->device_id) {
+	case IGC_DEV_ID_82542:
+		mac->type = igc_82542;
+		break;
+	case IGC_DEV_ID_82543GC_FIBER:
+	case IGC_DEV_ID_82543GC_COPPER:
+		mac->type = igc_82543;
+		break;
+	case IGC_DEV_ID_82544EI_COPPER:
+	case IGC_DEV_ID_82544EI_FIBER:
+	case IGC_DEV_ID_82544GC_COPPER:
+	case IGC_DEV_ID_82544GC_LOM:
+		mac->type = igc_82544;
+		break;
+	case IGC_DEV_ID_82540EM:
+	case IGC_DEV_ID_82540EM_LOM:
+	case IGC_DEV_ID_82540EP:
+	case IGC_DEV_ID_82540EP_LOM:
+	case IGC_DEV_ID_82540EP_LP:
+		mac->type = igc_82540;
+		break;
+	case IGC_DEV_ID_82545EM_COPPER:
+	case IGC_DEV_ID_82545EM_FIBER:
+		mac->type = igc_82545;
+		break;
+	case IGC_DEV_ID_82545GM_COPPER:
+	case IGC_DEV_ID_82545GM_FIBER:
+	case IGC_DEV_ID_82545GM_SERDES:
+		mac->type = igc_82545_rev_3;
+		break;
+	case IGC_DEV_ID_82546EB_COPPER:
+	case IGC_DEV_ID_82546EB_FIBER:
+	case IGC_DEV_ID_82546EB_QUAD_COPPER:
+		mac->type = igc_82546;
+		break;
+	case IGC_DEV_ID_82546GB_COPPER:
+	case IGC_DEV_ID_82546GB_FIBER:
+	case IGC_DEV_ID_82546GB_SERDES:
+	case IGC_DEV_ID_82546GB_PCIE:
+	case IGC_DEV_ID_82546GB_QUAD_COPPER:
+	case IGC_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+		mac->type = igc_82546_rev_3;
+		break;
+	case IGC_DEV_ID_82541EI:
+	case IGC_DEV_ID_82541EI_MOBILE:
+	case IGC_DEV_ID_82541ER_LOM:
+		mac->type = igc_82541;
+		break;
+	case IGC_DEV_ID_82541ER:
+	case IGC_DEV_ID_82541GI:
+	case IGC_DEV_ID_82541GI_LF:
+	case IGC_DEV_ID_82541GI_MOBILE:
+		mac->type = igc_82541_rev_2;
+		break;
+	case IGC_DEV_ID_82547EI:
+	case IGC_DEV_ID_82547EI_MOBILE:
+		mac->type = igc_82547;
+		break;
+	case IGC_DEV_ID_82547GI:
+		mac->type = igc_82547_rev_2;
+		break;
+	case IGC_DEV_ID_82571EB_COPPER:
+	case IGC_DEV_ID_82571EB_FIBER:
+	case IGC_DEV_ID_82571EB_SERDES:
+	case IGC_DEV_ID_82571EB_SERDES_DUAL:
+	case IGC_DEV_ID_82571EB_SERDES_QUAD:
+	case IGC_DEV_ID_82571EB_QUAD_COPPER:
+	case IGC_DEV_ID_82571PT_QUAD_COPPER:
+	case IGC_DEV_ID_82571EB_QUAD_FIBER:
+	case IGC_DEV_ID_82571EB_QUAD_COPPER_LP:
+		mac->type = igc_82571;
+		break;
+	case IGC_DEV_ID_82572EI:
+	case IGC_DEV_ID_82572EI_COPPER:
+	case IGC_DEV_ID_82572EI_FIBER:
+	case IGC_DEV_ID_82572EI_SERDES:
+		mac->type = igc_82572;
+		break;
+	case IGC_DEV_ID_82573E:
+	case IGC_DEV_ID_82573E_IAMT:
+	case IGC_DEV_ID_82573L:
+		mac->type = igc_82573;
+		break;
+	case IGC_DEV_ID_82574L:
+	case IGC_DEV_ID_82574LA:
+		mac->type = igc_82574;
+		break;
+	case IGC_DEV_ID_82583V:
+		mac->type = igc_82583;
+		break;
+	case IGC_DEV_ID_80003ES2LAN_COPPER_DPT:
+	case IGC_DEV_ID_80003ES2LAN_SERDES_DPT:
+	case IGC_DEV_ID_80003ES2LAN_COPPER_SPT:
+	case IGC_DEV_ID_80003ES2LAN_SERDES_SPT:
+		mac->type = igc_80003es2lan;
+		break;
+	case IGC_DEV_ID_ICH8_IFE:
+	case IGC_DEV_ID_ICH8_IFE_GT:
+	case IGC_DEV_ID_ICH8_IFE_G:
+	case IGC_DEV_ID_ICH8_IGP_M:
+	case IGC_DEV_ID_ICH8_IGP_M_AMT:
+	case IGC_DEV_ID_ICH8_IGP_AMT:
+	case IGC_DEV_ID_ICH8_IGP_C:
+	case IGC_DEV_ID_ICH8_82567V_3:
+		mac->type = igc_ich8lan;
+		break;
+	case IGC_DEV_ID_ICH9_IFE:
+	case IGC_DEV_ID_ICH9_IFE_GT:
+	case IGC_DEV_ID_ICH9_IFE_G:
+	case IGC_DEV_ID_ICH9_IGP_M:
+	case IGC_DEV_ID_ICH9_IGP_M_AMT:
+	case IGC_DEV_ID_ICH9_IGP_M_V:
+	case IGC_DEV_ID_ICH9_IGP_AMT:
+	case IGC_DEV_ID_ICH9_BM:
+	case IGC_DEV_ID_ICH9_IGP_C:
+	case IGC_DEV_ID_ICH10_R_BM_LM:
+	case IGC_DEV_ID_ICH10_R_BM_LF:
+	case IGC_DEV_ID_ICH10_R_BM_V:
+		mac->type = igc_ich9lan;
+		break;
+	case IGC_DEV_ID_ICH10_D_BM_LM:
+	case IGC_DEV_ID_ICH10_D_BM_LF:
+	case IGC_DEV_ID_ICH10_D_BM_V:
+		mac->type = igc_ich10lan;
+		break;
+	case IGC_DEV_ID_PCH_D_HV_DM:
+	case IGC_DEV_ID_PCH_D_HV_DC:
+	case IGC_DEV_ID_PCH_M_HV_LM:
+	case IGC_DEV_ID_PCH_M_HV_LC:
+		mac->type = igc_pchlan;
+		break;
+	case IGC_DEV_ID_PCH2_LV_LM:
+	case IGC_DEV_ID_PCH2_LV_V:
+		mac->type = igc_pch2lan;
+		break;
+	case IGC_DEV_ID_PCH_LPT_I217_LM:
+	case IGC_DEV_ID_PCH_LPT_I217_V:
+	case IGC_DEV_ID_PCH_LPTLP_I218_LM:
+	case IGC_DEV_ID_PCH_LPTLP_I218_V:
+	case IGC_DEV_ID_PCH_I218_LM2:
+	case IGC_DEV_ID_PCH_I218_V2:
+	case IGC_DEV_ID_PCH_I218_LM3:
+	case IGC_DEV_ID_PCH_I218_V3:
+		mac->type = igc_pch_lpt;
+		break;
+	case IGC_DEV_ID_PCH_SPT_I219_LM:
+	case IGC_DEV_ID_PCH_SPT_I219_V:
+	case IGC_DEV_ID_PCH_SPT_I219_LM2:
+	case IGC_DEV_ID_PCH_SPT_I219_V2:
+	case IGC_DEV_ID_PCH_LBG_I219_LM3:
+	case IGC_DEV_ID_PCH_SPT_I219_LM4:
+	case IGC_DEV_ID_PCH_SPT_I219_V4:
+	case IGC_DEV_ID_PCH_SPT_I219_LM5:
+	case IGC_DEV_ID_PCH_SPT_I219_V5:
+		mac->type = igc_pch_spt;
+		break;
+	case IGC_DEV_ID_PCH_CNP_I219_LM6:
+	case IGC_DEV_ID_PCH_CNP_I219_V6:
+	case IGC_DEV_ID_PCH_CNP_I219_LM7:
+	case IGC_DEV_ID_PCH_CNP_I219_V7:
+	case IGC_DEV_ID_PCH_ICP_I219_LM8:
+	case IGC_DEV_ID_PCH_ICP_I219_V8:
+	case IGC_DEV_ID_PCH_ICP_I219_LM9:
+	case IGC_DEV_ID_PCH_ICP_I219_V9:
+		mac->type = igc_pch_cnp;
+		break;
+	case IGC_DEV_ID_82575EB_COPPER:
+	case IGC_DEV_ID_82575EB_FIBER_SERDES:
+	case IGC_DEV_ID_82575GB_QUAD_COPPER:
+		mac->type = igc_82575;
+		break;
+	case IGC_DEV_ID_82576:
+	case IGC_DEV_ID_82576_FIBER:
+	case IGC_DEV_ID_82576_SERDES:
+	case IGC_DEV_ID_82576_QUAD_COPPER:
+	case IGC_DEV_ID_82576_QUAD_COPPER_ET2:
+	case IGC_DEV_ID_82576_NS:
+	case IGC_DEV_ID_82576_NS_SERDES:
+	case IGC_DEV_ID_82576_SERDES_QUAD:
+		mac->type = igc_82576;
+		break;
+	case IGC_DEV_ID_82576_VF:
+	case IGC_DEV_ID_82576_VF_HV:
+		mac->type = igc_vfadapt;
+		break;
+	case IGC_DEV_ID_82580_COPPER:
+	case IGC_DEV_ID_82580_FIBER:
+	case IGC_DEV_ID_82580_SERDES:
+	case IGC_DEV_ID_82580_SGMII:
+	case IGC_DEV_ID_82580_COPPER_DUAL:
+	case IGC_DEV_ID_82580_QUAD_FIBER:
+	case IGC_DEV_ID_DH89XXCC_SGMII:
+	case IGC_DEV_ID_DH89XXCC_SERDES:
+	case IGC_DEV_ID_DH89XXCC_BACKPLANE:
+	case IGC_DEV_ID_DH89XXCC_SFP:
+		mac->type = igc_82580;
+		break;
+	case IGC_DEV_ID_I350_COPPER:
+	case IGC_DEV_ID_I350_FIBER:
+	case IGC_DEV_ID_I350_SERDES:
+	case IGC_DEV_ID_I350_SGMII:
+	case IGC_DEV_ID_I350_DA4:
+		mac->type = igc_i350;
+		break;
+	case IGC_DEV_ID_I210_COPPER_FLASHLESS:
+	case IGC_DEV_ID_I210_SERDES_FLASHLESS:
+	case IGC_DEV_ID_I210_SGMII_FLASHLESS:
+	case IGC_DEV_ID_I210_COPPER:
+	case IGC_DEV_ID_I210_COPPER_OEM1:
+	case IGC_DEV_ID_I210_COPPER_IT:
+	case IGC_DEV_ID_I210_FIBER:
+	case IGC_DEV_ID_I210_SERDES:
+	case IGC_DEV_ID_I210_SGMII:
+		mac->type = igc_i210;
+		break;
+	case IGC_DEV_ID_I211_COPPER:
+		mac->type = igc_i211;
+		break;
+	case IGC_DEV_ID_I225_LM:
+	case IGC_DEV_ID_I225_V:
+	case IGC_DEV_ID_I225_K:
+	case IGC_DEV_ID_I225_I:
+	case IGC_DEV_ID_I220_V:
+	case IGC_DEV_ID_I225_BLANK_NVM:
+		mac->type = igc_i225;
+		break;
+	case IGC_DEV_ID_I350_VF:
+	case IGC_DEV_ID_I350_VF_HV:
+		mac->type = igc_vfadapt_i350;
+		break;
+	case IGC_DEV_ID_I354_BACKPLANE_1GBPS:
+	case IGC_DEV_ID_I354_SGMII:
+	case IGC_DEV_ID_I354_BACKPLANE_2_5GBPS:
+		mac->type = igc_i354;
+		break;
+	default:
+		/* Should never have loaded on this device */
+		ret_val = -IGC_ERR_MAC_INIT;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_setup_init_funcs - Initializes function pointers
+ *  @hw: pointer to the HW structure
+ *  @init_device: true will initialize the rest of the function pointers
+ *		  getting the device ready for use.  false will only set
+ *		  MAC type and the function pointers for the other init
+ *		  functions.  Passing false will not generate any hardware
+ *		  reads or writes.
+ *
+ *  This function must be called by a driver in order to use the rest
+ *  of the 'shared' code files. Called by drivers only.
+ **/
+s32 igc_setup_init_funcs(struct igc_hw *hw, bool init_device)
+{
+	s32 ret_val;
+
+	/* Can't do much good without knowing the MAC type. */
+	ret_val = igc_set_mac_type(hw);
+	if (ret_val) {
+		DEBUGOUT("ERROR: MAC type could not be set properly.\n");
+		goto out;
+	}
+
+	if (!hw->hw_addr) {
+		DEBUGOUT("ERROR: Registers not mapped\n");
+		ret_val = -IGC_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Init function pointers to generic implementations. We do this first
+	 * allowing a driver module to override it afterward.
+	 */
+	igc_init_mac_ops_generic(hw);
+	igc_init_phy_ops_generic(hw);
+	igc_init_nvm_ops_generic(hw);
+
+	/*
+	 * Set up the init function pointers. These are functions within the
+	 * adapter family file that sets up function pointers for the rest of
+	 * the functions in that family.
+	 */
+	switch (hw->mac.type) {
+	case igc_i225:
+		igc_init_function_pointers_i225(hw);
+		break;
+	default:
+		DEBUGOUT("Hardware not supported\n");
+		ret_val = -IGC_ERR_CONFIG;
+		break;
+	}
+
+	/*
+	 * Initialize the rest of the function pointers. These require some
+	 * register reads/writes in some cases.
+	 */
+	if (!(ret_val) && init_device) {
+		ret_val = igc_init_mac_params(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = igc_init_nvm_params(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = igc_init_phy_params(hw);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_get_bus_info - Obtain bus information for adapter
+ *  @hw: pointer to the HW structure
+ *
+ *  This will obtain information about the HW bus for which the
+ *  adapter is attached and stores it in the hw structure. This is a
+ *  function pointer entry point called by drivers.
+ **/
+s32 igc_get_bus_info(struct igc_hw *hw)
+{
+	if (hw->mac.ops.get_bus_info)
+		return hw->mac.ops.get_bus_info(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  This clears the VLAN filter table on the adapter. This is a function
+ *  pointer entry point called by drivers.
+ **/
+void igc_clear_vfta(struct igc_hw *hw)
+{
+	if (hw->mac.ops.clear_vfta)
+		hw->mac.ops.clear_vfta(hw);
+}
+
+/**
+ *  igc_write_vfta - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: the 32-bit offset in which to write the value to.
+ *  @value: the 32-bit value to write at location offset.
+ *
+ *  This writes a 32-bit value to a 32-bit offset in the VLAN filter
+ *  table. This is a function pointer entry point called by drivers.
+ **/
+void igc_write_vfta(struct igc_hw *hw, u32 offset, u32 value)
+{
+	if (hw->mac.ops.write_vfta)
+		hw->mac.ops.write_vfta(hw, offset, value);
+}
+
+/**
+ *  igc_update_mc_addr_list - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates the Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igc_update_mc_addr_list(struct igc_hw *hw, u8 *mc_addr_list,
+			       u32 mc_addr_count)
+{
+	if (hw->mac.ops.update_mc_addr_list)
+		hw->mac.ops.update_mc_addr_list(hw, mc_addr_list,
+						mc_addr_count);
+}
+
+/**
+ *  igc_force_mac_fc - Force MAC flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings. Currently no func pointer exists
+ *  and all implementations are handled in the generic version of this
+ *  function.
+ **/
+s32 igc_force_mac_fc(struct igc_hw *hw)
+{
+	return igc_force_mac_fc_generic(hw);
+}
+
+/**
+ *  igc_check_for_link - Check/Store link connection
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks the link condition of the adapter and stores the
+ *  results in the hw->mac structure. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 igc_check_for_link(struct igc_hw *hw)
+{
+	if (hw->mac.ops.check_for_link)
+		return hw->mac.ops.check_for_link(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_check_mng_mode - Check management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has manageability enabled.
+ *  This is a function pointer entry point called by drivers.
+ **/
+bool igc_check_mng_mode(struct igc_hw *hw)
+{
+	if (hw->mac.ops.check_mng_mode)
+		return hw->mac.ops.check_mng_mode(hw);
+
+	return false;
+}
+
+/**
+ *  igc_mng_write_dhcp_info - Writes DHCP info to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface
+ *  @length: size of the buffer
+ *
+ *  Writes the DHCP information to the host interface.
+ **/
+s32 igc_mng_write_dhcp_info(struct igc_hw *hw, u8 *buffer, u16 length)
+{
+	return igc_mng_write_dhcp_info_generic(hw, buffer, length);
+}
+
+/**
+ *  igc_reset_hw - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 igc_reset_hw(struct igc_hw *hw)
+{
+	if (hw->mac.ops.reset_hw)
+		return hw->mac.ops.reset_hw(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_init_hw - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation. This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 igc_init_hw(struct igc_hw *hw)
+{
+	if (hw->mac.ops.init_hw)
+		return hw->mac.ops.init_hw(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_setup_link - Configures link and flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  This configures link and flow control settings for the adapter. This
+ *  is a function pointer entry point called by drivers. While modules can
+ *  also call this, they probably call their own version of this function.
+ **/
+s32 igc_setup_link(struct igc_hw *hw)
+{
+	if (hw->mac.ops.setup_link)
+		return hw->mac.ops.setup_link(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_get_speed_and_duplex - Returns current speed and duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: pointer to a 16-bit value to store the speed
+ *  @duplex: pointer to a 16-bit value to store the duplex.
+ *
+ *  This returns the speed and duplex of the adapter in the two 'out'
+ *  variables passed in. This is a function pointer entry point called
+ *  by drivers.
+ **/
+s32 igc_get_speed_and_duplex(struct igc_hw *hw, u16 *speed, u16 *duplex)
+{
+	if (hw->mac.ops.get_link_up_info)
+		return hw->mac.ops.get_link_up_info(hw, speed, duplex);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_setup_led - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 igc_setup_led(struct igc_hw *hw)
+{
+	if (hw->mac.ops.setup_led)
+		return hw->mac.ops.setup_led(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_cleanup_led - Restores SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This restores the SW controllable LED to the value saved off by
+ *  igc_setup_led. This is a function pointer entry point called by drivers.
+ **/
+s32 igc_cleanup_led(struct igc_hw *hw)
+{
+	if (hw->mac.ops.cleanup_led)
+		return hw->mac.ops.cleanup_led(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_blink_led - Blink SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This starts the adapter LED blinking. Request the LED to be setup first
+ *  and cleaned up after. This is a function pointer entry point called by
+ *  drivers.
+ **/
+s32 igc_blink_led(struct igc_hw *hw)
+{
+	if (hw->mac.ops.blink_led)
+		return hw->mac.ops.blink_led(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_id_led_init - store LED configurations in SW
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the LED config in SW. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 igc_id_led_init(struct igc_hw *hw)
+{
+	if (hw->mac.ops.id_led_init)
+		return hw->mac.ops.id_led_init(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_led_on - Turn on SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Turns the SW defined LED on. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 igc_led_on(struct igc_hw *hw)
+{
+	if (hw->mac.ops.led_on)
+		return hw->mac.ops.led_on(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_led_off - Turn off SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Turns the SW defined LED off. This is a function pointer entry point
+ *  called by drivers.
+ **/
+s32 igc_led_off(struct igc_hw *hw)
+{
+	if (hw->mac.ops.led_off)
+		return hw->mac.ops.led_off(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_reset_adaptive - Reset adaptive IFS
+ *  @hw: pointer to the HW structure
+ *
+ *  Resets the adaptive IFS. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+void igc_reset_adaptive(struct igc_hw *hw)
+{
+	igc_reset_adaptive_generic(hw);
+}
+
+/**
+ *  igc_update_adaptive - Update adaptive IFS
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates adapter IFS. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+void igc_update_adaptive(struct igc_hw *hw)
+{
+	igc_update_adaptive_generic(hw);
+}
+
+/**
+ *  igc_disable_pcie_master - Disable PCI-Express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. Currently no func pointer exists and all implementations are
+ *  handled in the generic version of this function.
+ **/
+s32 igc_disable_pcie_master(struct igc_hw *hw)
+{
+	return igc_disable_pcie_master_generic(hw);
+}
+
+/**
+ *  igc_config_collision_dist - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+void igc_config_collision_dist(struct igc_hw *hw)
+{
+	if (hw->mac.ops.config_collision_dist)
+		hw->mac.ops.config_collision_dist(hw);
+}
+
+/**
+ *  igc_rar_set - Sets a receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: address to set the RAR to
+ *  @index: the RAR to set
+ *
+ *  Sets a Receive Address Register (RAR) to the specified address.
+ **/
+int igc_rar_set(struct igc_hw *hw, u8 *addr, u32 index)
+{
+	if (hw->mac.ops.rar_set)
+		return hw->mac.ops.rar_set(hw, addr, index);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_validate_mdi_setting - Ensures valid MDI/MDIX SW state
+ *  @hw: pointer to the HW structure
+ *
+ *  Ensures that the MDI/MDIX SW state is valid.
+ **/
+s32 igc_validate_mdi_setting(struct igc_hw *hw)
+{
+	if (hw->mac.ops.validate_mdi_setting)
+		return hw->mac.ops.validate_mdi_setting(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_hash_mc_addr - Determines address location in multicast table
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: Multicast address to hash.
+ *
+ *  This hashes an address to determine its location in the multicast
+ *  table. Currently no func pointer exists and all implementations
+ *  are handled in the generic version of this function.
+ **/
+u32 igc_hash_mc_addr(struct igc_hw *hw, u8 *mc_addr)
+{
+	return igc_hash_mc_addr_generic(hw, mc_addr);
+}
+
+/**
+ *  igc_enable_tx_pkt_filtering - Enable packet filtering on TX
+ *  @hw: pointer to the HW structure
+ *
+ *  Enables packet filtering on transmit packets if manageability is enabled
+ *  and host interface is enabled.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+bool igc_enable_tx_pkt_filtering(struct igc_hw *hw)
+{
+	return igc_enable_tx_pkt_filtering_generic(hw);
+}
+
+/**
+ *  igc_mng_host_if_write - Writes to the manageability host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface buffer
+ *  @length: size of the buffer
+ *  @offset: location in the buffer to write to
+ *  @sum: sum of the data (not checksum)
+ *
+ *  This function writes the buffer content at the offset given on the host if.
+ *  It also does alignment considerations to do the writes in most efficient
+ *  way.  Also fills up the sum of the buffer in *buffer parameter.
+ **/
+s32 igc_mng_host_if_write(struct igc_hw *hw, u8 *buffer, u16 length,
+			    u16 offset, u8 *sum)
+{
+	return igc_mng_host_if_write_generic(hw, buffer, length, offset, sum);
+}
+
+/**
+ *  igc_mng_write_cmd_header - Writes manageability command header
+ *  @hw: pointer to the HW structure
+ *  @hdr: pointer to the host interface command header
+ *
+ *  Writes the command header after does the checksum calculation.
+ **/
+s32 igc_mng_write_cmd_header(struct igc_hw *hw,
+			       struct igc_host_mng_command_header *hdr)
+{
+	return igc_mng_write_cmd_header_generic(hw, hdr);
+}
+
+/**
+ *  igc_mng_enable_host_if - Checks host interface is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns IGC_success upon success, else IGC_ERR_HOST_INTERFACE_COMMAND
+ *
+ *  This function checks whether the HOST IF is enabled for command operation
+ *  and also checks whether the previous command is completed.  It busy waits
+ *  in case of previous command is not completed.
+ **/
+s32 igc_mng_enable_host_if(struct igc_hw *hw)
+{
+	return igc_mng_enable_host_if_generic(hw);
+}
+
+/**
+ *  igc_check_reset_block - Verifies PHY can be reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks if the PHY is in a state that can be reset or if manageability
+ *  has it tied up. This is a function pointer entry point called by drivers.
+ **/
+s32 igc_check_reset_block(struct igc_hw *hw)
+{
+	if (hw->phy.ops.check_reset_block)
+		return hw->phy.ops.check_reset_block(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_phy_reg - Reads PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to read
+ *  @data: the buffer to store the 16-bit read.
+ *
+ *  Reads the PHY register and returns the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 igc_read_phy_reg(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	if (hw->phy.ops.read_reg)
+		return hw->phy.ops.read_reg(hw, offset, data);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_phy_reg - Writes PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes the PHY register at offset with the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 igc_write_phy_reg(struct igc_hw *hw, u32 offset, u16 data)
+{
+	if (hw->phy.ops.write_reg)
+		return hw->phy.ops.write_reg(hw, offset, data);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_release_phy - Generic release PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Return if silicon family does not require a semaphore when accessing the
+ *  PHY.
+ **/
+void igc_release_phy(struct igc_hw *hw)
+{
+	if (hw->phy.ops.release)
+		hw->phy.ops.release(hw);
+}
+
+/**
+ *  igc_acquire_phy - Generic acquire PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Return success if silicon family does not require a semaphore when
+ *  accessing the PHY.
+ **/
+s32 igc_acquire_phy(struct igc_hw *hw)
+{
+	if (hw->phy.ops.acquire)
+		return hw->phy.ops.acquire(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_cfg_on_link_up - Configure PHY upon link up
+ *  @hw: pointer to the HW structure
+ **/
+s32 igc_cfg_on_link_up(struct igc_hw *hw)
+{
+	if (hw->phy.ops.cfg_on_link_up)
+		return hw->phy.ops.cfg_on_link_up(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_kmrn_reg - Reads register using Kumeran interface
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to read
+ *  @data: the location to store the 16-bit value read.
+ *
+ *  Reads a register out of the Kumeran interface. Currently no func pointer
+ *  exists and all implementations are handled in the generic version of
+ *  this function.
+ **/
+s32 igc_read_kmrn_reg(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return igc_read_kmrn_reg_generic(hw, offset, data);
+}
+
+/**
+ *  igc_write_kmrn_reg - Writes register using Kumeran interface
+ *  @hw: pointer to the HW structure
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes a register to the Kumeran interface. Currently no func pointer
+ *  exists and all implementations are handled in the generic version of
+ *  this function.
+ **/
+s32 igc_write_kmrn_reg(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return igc_write_kmrn_reg_generic(hw, offset, data);
+}
+
+/**
+ *  igc_get_cable_length - Retrieves cable length estimation
+ *  @hw: pointer to the HW structure
+ *
+ *  This function estimates the cable length and stores them in
+ *  hw->phy.min_length and hw->phy.max_length. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 igc_get_cable_length(struct igc_hw *hw)
+{
+	if (hw->phy.ops.get_cable_length)
+		return hw->phy.ops.get_cable_length(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_phy_info - Retrieves PHY information from registers
+ *  @hw: pointer to the HW structure
+ *
+ *  This function gets some information from various PHY registers and
+ *  populates hw->phy values with it. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 igc_get_phy_info(struct igc_hw *hw)
+{
+	if (hw->phy.ops.get_info)
+		return hw->phy.ops.get_info(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_hw_reset - Hard PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs a hard PHY reset. This is a function pointer entry point called
+ *  by drivers.
+ **/
+s32 igc_phy_hw_reset(struct igc_hw *hw)
+{
+	if (hw->phy.ops.reset)
+		return hw->phy.ops.reset(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_commit - Soft PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs a soft PHY reset on those that apply. This is a function pointer
+ *  entry point called by drivers.
+ **/
+s32 igc_phy_commit(struct igc_hw *hw)
+{
+	if (hw->phy.ops.commit)
+		return hw->phy.ops.commit(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_d0_lplu_state - Sets low power link up state for D0
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D0
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D0
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.  This is a function pointer entry point called by drivers.
+ **/
+s32 igc_set_d0_lplu_state(struct igc_hw *hw, bool active)
+{
+	if (hw->phy.ops.set_d0_lplu_state)
+		return hw->phy.ops.set_d0_lplu_state(hw, active);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_d3_lplu_state - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.  This is a function pointer entry point called by drivers.
+ **/
+s32 igc_set_d3_lplu_state(struct igc_hw *hw, bool active)
+{
+	if (hw->phy.ops.set_d3_lplu_state)
+		return hw->phy.ops.set_d3_lplu_state(hw, active);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_mac_addr - Reads MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MAC address out of the adapter and stores it in the HW structure.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 igc_read_mac_addr(struct igc_hw *hw)
+{
+	if (hw->mac.ops.read_mac_addr)
+		return hw->mac.ops.read_mac_addr(hw);
+
+	return igc_read_mac_addr_generic(hw);
+}
+
+/**
+ *  igc_read_pba_string - Read device part number string
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 igc_read_pba_string(struct igc_hw *hw, u8 *pba_num, u32 pba_num_size)
+{
+	return igc_read_pba_string_generic(hw, pba_num, pba_num_size);
+}
+
+/**
+ *  igc_read_pba_length - Read device part number string length
+ *  @hw: pointer to the HW structure
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number length from the EEPROM and
+ *  stores the value in pba_num.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 igc_read_pba_length(struct igc_hw *hw, u32 *pba_num_size)
+{
+	return igc_read_pba_length_generic(hw, pba_num_size);
+}
+
+/**
+ *  igc_read_pba_num - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ *  Currently no func pointer exists and all implementations are handled in the
+ *  generic version of this function.
+ **/
+s32 igc_read_pba_num(struct igc_hw *hw, u32 *pba_num)
+{
+	return igc_read_pba_num_generic(hw, pba_num);
+}
+
+/**
+ *  igc_validate_nvm_checksum - Verifies NVM (EEPROM) checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Validates the NVM checksum is correct. This is a function pointer entry
+ *  point called by drivers.
+ **/
+s32 igc_validate_nvm_checksum(struct igc_hw *hw)
+{
+	if (hw->nvm.ops.validate)
+		return hw->nvm.ops.validate(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_update_nvm_checksum - Updates NVM (EEPROM) checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the NVM checksum. Currently no func pointer exists and all
+ *  implementations are handled in the generic version of this function.
+ **/
+s32 igc_update_nvm_checksum(struct igc_hw *hw)
+{
+	if (hw->nvm.ops.update)
+		return hw->nvm.ops.update(hw);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_reload_nvm - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+void igc_reload_nvm(struct igc_hw *hw)
+{
+	if (hw->nvm.ops.reload)
+		hw->nvm.ops.reload(hw);
+}
+
+/**
+ *  igc_read_nvm - Reads NVM (EEPROM)
+ *  @hw: pointer to the HW structure
+ *  @offset: the word offset to read
+ *  @words: number of 16-bit words to read
+ *  @data: pointer to the properly sized buffer for the data.
+ *
+ *  Reads 16-bit chunks of data from the NVM (EEPROM). This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 igc_read_nvm(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	if (hw->nvm.ops.read)
+		return hw->nvm.ops.read(hw, offset, words, data);
+
+	return -IGC_ERR_CONFIG;
+}
+
+/**
+ *  igc_write_nvm - Writes to NVM (EEPROM)
+ *  @hw: pointer to the HW structure
+ *  @offset: the word offset to read
+ *  @words: number of 16-bit words to write
+ *  @data: pointer to the properly sized buffer for the data.
+ *
+ *  Writes 16-bit chunks of data to the NVM (EEPROM). This is a function
+ *  pointer entry point called by drivers.
+ **/
+s32 igc_write_nvm(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	if (hw->nvm.ops.write)
+		return hw->nvm.ops.write(hw, offset, words, data);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_8bit_ctrl_reg - Writes 8bit Control register
+ *  @hw: pointer to the HW structure
+ *  @reg: 32bit register offset
+ *  @offset: the register to write
+ *  @data: the value to write.
+ *
+ *  Writes the PHY register at offset with the value in data.
+ *  This is a function pointer entry point called by drivers.
+ **/
+s32 igc_write_8bit_ctrl_reg(struct igc_hw *hw, u32 reg, u32 offset,
+			      u8 data)
+{
+	return igc_write_8bit_ctrl_reg_generic(hw, reg, offset, data);
+}
+
+/**
+ * igc_power_up_phy - Restores link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * The phy may be powered down to save power, to turn off link when the
+ * driver is unloaded, or wake on lan is not enabled (among others).
+ **/
+void igc_power_up_phy(struct igc_hw *hw)
+{
+	if (hw->phy.ops.power_up)
+		hw->phy.ops.power_up(hw);
+
+	igc_setup_link(hw);
+}
+
+/**
+ * igc_power_down_phy - Power down PHY
+ * @hw: pointer to the HW structure
+ *
+ * The phy may be powered down to save power, to turn off link when the
+ * driver is unloaded, or wake on lan is not enabled (among others).
+ **/
+void igc_power_down_phy(struct igc_hw *hw)
+{
+	if (hw->phy.ops.power_down)
+		hw->phy.ops.power_down(hw);
+}
+
+/**
+ *  igc_power_up_fiber_serdes_link - Power up serdes link
+ *  @hw: pointer to the HW structure
+ *
+ *  Power on the optics and PCS.
+ **/
+void igc_power_up_fiber_serdes_link(struct igc_hw *hw)
+{
+	if (hw->mac.ops.power_up_serdes)
+		hw->mac.ops.power_up_serdes(hw);
+}
+
+/**
+ *  igc_shutdown_fiber_serdes_link - Remove link during power down
+ *  @hw: pointer to the HW structure
+ *
+ *  Shutdown the optics and PCS on driver unload.
+ **/
+void igc_shutdown_fiber_serdes_link(struct igc_hw *hw)
+{
+	if (hw->mac.ops.shutdown_serdes)
+		hw->mac.ops.shutdown_serdes(hw);
+}
diff --git a/drivers/net/igc/base/igc_api.h b/drivers/net/igc/base/igc_api.h
new file mode 100644
index 0000000..94d802b
--- /dev/null
+++ b/drivers/net/igc/base/igc_api.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_API_H_
+#define _IGC_API_H_
+
+#include "igc_hw.h"
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IGC_I2C_T_HD_STA	4
+#define IGC_I2C_T_LOW		5
+#define IGC_I2C_T_HIGH		4
+#define IGC_I2C_T_SU_STA	5
+#define IGC_I2C_T_HD_DATA	5
+#define IGC_I2C_T_SU_DATA	1
+#define IGC_I2C_T_RISE		1
+#define IGC_I2C_T_FALL		1
+#define IGC_I2C_T_SU_STO	4
+#define IGC_I2C_T_BUF		5
+
+s32 igc_set_i2c_bb(struct igc_hw *hw);
+s32 igc_read_i2c_byte_generic(struct igc_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data);
+s32 igc_write_i2c_byte_generic(struct igc_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data);
+void igc_i2c_bus_clear(struct igc_hw *hw);
+
+void igc_init_function_pointers_82542(struct igc_hw *hw);
+void igc_init_function_pointers_82543(struct igc_hw *hw);
+void igc_init_function_pointers_82540(struct igc_hw *hw);
+void igc_init_function_pointers_82571(struct igc_hw *hw);
+void igc_init_function_pointers_82541(struct igc_hw *hw);
+void igc_init_function_pointers_80003es2lan(struct igc_hw *hw);
+void igc_init_function_pointers_ich8lan(struct igc_hw *hw);
+void igc_init_function_pointers_82575(struct igc_hw *hw);
+void igc_init_function_pointers_vf(struct igc_hw *hw);
+void igc_power_up_fiber_serdes_link(struct igc_hw *hw);
+void igc_shutdown_fiber_serdes_link(struct igc_hw *hw);
+void igc_init_function_pointers_i210(struct igc_hw *hw);
+void igc_init_function_pointers_i225(struct igc_hw *hw);
+
+s32 igc_set_obff_timer(struct igc_hw *hw, u32 itr);
+s32 igc_set_mac_type(struct igc_hw *hw);
+s32 igc_setup_init_funcs(struct igc_hw *hw, bool init_device);
+s32 igc_init_mac_params(struct igc_hw *hw);
+s32 igc_init_nvm_params(struct igc_hw *hw);
+s32 igc_init_phy_params(struct igc_hw *hw);
+s32 igc_init_mbx_params(struct igc_hw *hw);
+s32 igc_get_bus_info(struct igc_hw *hw);
+void igc_clear_vfta(struct igc_hw *hw);
+void igc_write_vfta(struct igc_hw *hw, u32 offset, u32 value);
+s32 igc_force_mac_fc(struct igc_hw *hw);
+s32 igc_check_for_link(struct igc_hw *hw);
+s32 igc_reset_hw(struct igc_hw *hw);
+s32 igc_init_hw(struct igc_hw *hw);
+s32 igc_setup_link(struct igc_hw *hw);
+s32 igc_get_speed_and_duplex(struct igc_hw *hw, u16 *speed, u16 *duplex);
+s32 igc_disable_pcie_master(struct igc_hw *hw);
+void igc_config_collision_dist(struct igc_hw *hw);
+int igc_rar_set(struct igc_hw *hw, u8 *addr, u32 index);
+u32 igc_hash_mc_addr(struct igc_hw *hw, u8 *mc_addr);
+void igc_update_mc_addr_list(struct igc_hw *hw, u8 *mc_addr_list,
+			       u32 mc_addr_count);
+s32 igc_setup_led(struct igc_hw *hw);
+s32 igc_cleanup_led(struct igc_hw *hw);
+s32 igc_check_reset_block(struct igc_hw *hw);
+s32 igc_blink_led(struct igc_hw *hw);
+s32 igc_led_on(struct igc_hw *hw);
+s32 igc_led_off(struct igc_hw *hw);
+s32 igc_id_led_init(struct igc_hw *hw);
+void igc_reset_adaptive(struct igc_hw *hw);
+void igc_update_adaptive(struct igc_hw *hw);
+s32 igc_get_cable_length(struct igc_hw *hw);
+s32 igc_validate_mdi_setting(struct igc_hw *hw);
+s32 igc_read_phy_reg(struct igc_hw *hw, u32 offset, u16 *data);
+s32 igc_write_phy_reg(struct igc_hw *hw, u32 offset, u16 data);
+s32 igc_write_8bit_ctrl_reg(struct igc_hw *hw, u32 reg, u32 offset,
+			      u8 data);
+s32 igc_get_phy_info(struct igc_hw *hw);
+void igc_release_phy(struct igc_hw *hw);
+s32 igc_acquire_phy(struct igc_hw *hw);
+s32 igc_cfg_on_link_up(struct igc_hw *hw);
+s32 igc_phy_hw_reset(struct igc_hw *hw);
+s32 igc_phy_commit(struct igc_hw *hw);
+void igc_power_up_phy(struct igc_hw *hw);
+void igc_power_down_phy(struct igc_hw *hw);
+s32 igc_read_mac_addr(struct igc_hw *hw);
+s32 igc_read_pba_num(struct igc_hw *hw, u32 *part_num);
+s32 igc_read_pba_string(struct igc_hw *hw, u8 *pba_num, u32 pba_num_size);
+s32 igc_read_pba_length(struct igc_hw *hw, u32 *pba_num_size);
+void igc_reload_nvm(struct igc_hw *hw);
+s32 igc_update_nvm_checksum(struct igc_hw *hw);
+s32 igc_validate_nvm_checksum(struct igc_hw *hw);
+s32 igc_read_nvm(struct igc_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igc_read_kmrn_reg(struct igc_hw *hw, u32 offset, u16 *data);
+s32 igc_write_kmrn_reg(struct igc_hw *hw, u32 offset, u16 data);
+s32 igc_write_nvm(struct igc_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igc_set_d3_lplu_state(struct igc_hw *hw, bool active);
+s32 igc_set_d0_lplu_state(struct igc_hw *hw, bool active);
+bool igc_check_mng_mode(struct igc_hw *hw);
+bool igc_enable_tx_pkt_filtering(struct igc_hw *hw);
+s32 igc_mng_enable_host_if(struct igc_hw *hw);
+s32 igc_mng_host_if_write(struct igc_hw *hw, u8 *buffer, u16 length,
+			    u16 offset, u8 *sum);
+s32 igc_mng_write_cmd_header(struct igc_hw *hw,
+			       struct igc_host_mng_command_header *hdr);
+s32 igc_mng_write_dhcp_info(struct igc_hw *hw, u8 *buffer, u16 length);
+u32  igc_translate_register_82542(u32 reg);
+
+#endif /* _IGC_API_H_ */
diff --git a/drivers/net/igc/base/igc_base.c b/drivers/net/igc/base/igc_base.c
new file mode 100644
index 0000000..f3ef0f9
--- /dev/null
+++ b/drivers/net/igc/base/igc_base.c
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_hw.h"
+#include "igc_i225.h"
+#include "igc_mac.h"
+#include "igc_base.h"
+#include "igc_manage.h"
+
+/**
+ *  igc_acquire_phy_base - Acquire rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire access rights to the correct PHY.
+ **/
+s32 igc_acquire_phy_base(struct igc_hw *hw)
+{
+	u16 mask = IGC_SWFW_PHY0_SM;
+
+	DEBUGFUNC("igc_acquire_phy_base");
+
+	if (hw->bus.func == IGC_FUNC_1)
+		mask = IGC_SWFW_PHY1_SM;
+	else if (hw->bus.func == IGC_FUNC_2)
+		mask = IGC_SWFW_PHY2_SM;
+	else if (hw->bus.func == IGC_FUNC_3)
+		mask = IGC_SWFW_PHY3_SM;
+
+	return hw->mac.ops.acquire_swfw_sync(hw, mask);
+}
+
+/**
+ *  igc_release_phy_base - Release rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  A wrapper to release access rights to the correct PHY.
+ **/
+void igc_release_phy_base(struct igc_hw *hw)
+{
+	u16 mask = IGC_SWFW_PHY0_SM;
+
+	DEBUGFUNC("igc_release_phy_base");
+
+	if (hw->bus.func == IGC_FUNC_1)
+		mask = IGC_SWFW_PHY1_SM;
+	else if (hw->bus.func == IGC_FUNC_2)
+		mask = IGC_SWFW_PHY2_SM;
+	else if (hw->bus.func == IGC_FUNC_3)
+		mask = IGC_SWFW_PHY3_SM;
+
+	hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+/**
+ *  igc_init_hw_base - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation.
+ **/
+s32 igc_init_hw_base(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	u16 i, rar_count = mac->rar_entry_count;
+
+	DEBUGFUNC("igc_init_hw_base");
+
+	/* Setup the receive address */
+	igc_init_rx_addrs_generic(hw, rar_count);
+
+	/* Zero out the Multicast HASH table */
+	DEBUGOUT("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		IGC_WRITE_REG_ARRAY(hw, IGC_MTA, i, 0);
+
+	/* Zero out the Unicast HASH table */
+	DEBUGOUT("Zeroing the UTA\n");
+	for (i = 0; i < mac->uta_reg_count; i++)
+		IGC_WRITE_REG_ARRAY(hw, IGC_UTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+	/*
+	 * Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	igc_clear_hw_cntrs_base_generic(hw);
+
+	return ret_val;
+}
+
+/**
+ * igc_power_down_phy_copper_base - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igc_power_down_phy_copper_base(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+
+	if (!(phy->ops.check_reset_block))
+		return;
+
+	/* If the management interface is not enabled, then power down */
+	if (!phy->ops.check_reset_block(hw))
+		igc_power_down_phy_copper(hw);
+}
+
+/**
+ *  igc_rx_fifo_flush_base - Clean Rx FIFO after Rx enable
+ *  @hw: pointer to the HW structure
+ *
+ *  After Rx enable, if manageability is enabled then there is likely some
+ *  bad data at the start of the FIFO and possibly in the DMA FIFO.  This
+ *  function clears the FIFOs and flushes any packets that came in as Rx was
+ *  being enabled.
+ **/
+void igc_rx_fifo_flush_base(struct igc_hw *hw)
+{
+	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+	int i, ms_wait;
+
+	DEBUGFUNC("igc_rx_fifo_flush_base");
+
+	/* disable IPv6 options as per hardware errata */
+	rfctl = IGC_READ_REG(hw, IGC_RFCTL);
+	rfctl |= IGC_RFCTL_IPV6_EX_DIS;
+	IGC_WRITE_REG(hw, IGC_RFCTL, rfctl);
+
+	if (!(IGC_READ_REG(hw, IGC_MANC) & IGC_MANC_RCV_TCO_EN))
+		return;
+
+	/* Disable all Rx queues */
+	for (i = 0; i < 4; i++) {
+		rxdctl[i] = IGC_READ_REG(hw, IGC_RXDCTL(i));
+		IGC_WRITE_REG(hw, IGC_RXDCTL(i),
+				rxdctl[i] & ~IGC_RXDCTL_QUEUE_ENABLE);
+	}
+	/* Poll all queues to verify they have shut down */
+	for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+		msec_delay(1);
+		rx_enabled = 0;
+		for (i = 0; i < 4; i++)
+			rx_enabled |= IGC_READ_REG(hw, IGC_RXDCTL(i));
+		if (!(rx_enabled & IGC_RXDCTL_QUEUE_ENABLE))
+			break;
+	}
+
+	if (ms_wait == 10)
+		DEBUGOUT("Queue disable timed out after 10ms\n");
+
+	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+	 * incoming packets are rejected.  Set enable and wait 2ms so that
+	 * any packet that was coming in as RCTL.EN was set is flushed
+	 */
+	IGC_WRITE_REG(hw, IGC_RFCTL, rfctl & ~IGC_RFCTL_LEF);
+
+	rlpml = IGC_READ_REG(hw, IGC_RLPML);
+	IGC_WRITE_REG(hw, IGC_RLPML, 0);
+
+	rctl = IGC_READ_REG(hw, IGC_RCTL);
+	temp_rctl = rctl & ~(IGC_RCTL_EN | IGC_RCTL_SBP);
+	temp_rctl |= IGC_RCTL_LPE;
+
+	IGC_WRITE_REG(hw, IGC_RCTL, temp_rctl);
+	IGC_WRITE_REG(hw, IGC_RCTL, temp_rctl | IGC_RCTL_EN);
+	IGC_WRITE_FLUSH(hw);
+	msec_delay(2);
+
+	/* Enable Rx queues that were previously enabled and restore our
+	 * previous state
+	 */
+	for (i = 0; i < 4; i++)
+		IGC_WRITE_REG(hw, IGC_RXDCTL(i), rxdctl[i]);
+	IGC_WRITE_REG(hw, IGC_RCTL, rctl);
+	IGC_WRITE_FLUSH(hw);
+
+	IGC_WRITE_REG(hw, IGC_RLPML, rlpml);
+	IGC_WRITE_REG(hw, IGC_RFCTL, rfctl);
+
+	/* Flush receive errors generated by workaround */
+	IGC_READ_REG(hw, IGC_ROC);
+	IGC_READ_REG(hw, IGC_RNBC);
+	IGC_READ_REG(hw, IGC_MPC);
+}
diff --git a/drivers/net/igc/base/igc_base.h b/drivers/net/igc/base/igc_base.h
new file mode 100644
index 0000000..2817a29
--- /dev/null
+++ b/drivers/net/igc/base/igc_base.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_BASE_H_
+#define _IGC_BASE_H_
+
+/* forward declaration */
+s32 igc_init_hw_base(struct igc_hw *hw);
+void igc_power_down_phy_copper_base(struct igc_hw *hw);
+void igc_rx_fifo_flush_base(struct igc_hw *hw);
+s32 igc_acquire_phy_base(struct igc_hw *hw);
+void igc_release_phy_base(struct igc_hw *hw);
+
+/* Transmit Descriptor - Advanced */
+union igc_adv_tx_desc {
+	struct {
+		__le64 buffer_addr;    /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Context descriptors */
+struct igc_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	union {
+		__le32 launch_time;
+		__le32 seqnum_seed;
+	} u;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IGC_ADVTXD_DTYP_CTXT	0x00200000 /* Advanced Context Descriptor */
+#define IGC_ADVTXD_DTYP_DATA	0x00300000 /* Advanced Data Descriptor */
+#define IGC_ADVTXD_DCMD_EOP	0x01000000 /* End of Packet */
+#define IGC_ADVTXD_DCMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IGC_ADVTXD_DCMD_RS	0x08000000 /* Report Status */
+#define IGC_ADVTXD_DCMD_DDTYP_ISCSI	0x10000000 /* DDP hdr type or iSCSI */
+#define IGC_ADVTXD_DCMD_DEXT	0x20000000 /* Descriptor extension (1=Adv) */
+#define IGC_ADVTXD_DCMD_VLE	0x40000000 /* VLAN pkt enable */
+#define IGC_ADVTXD_DCMD_TSE	0x80000000 /* TCP Seg enable */
+#define IGC_ADVTXD_MAC_LINKSEC	0x00040000 /* Apply LinkSec on pkt */
+#define IGC_ADVTXD_MAC_TSTAMP		0x00080000 /* IEEE1588 Timestamp pkt */
+#define IGC_ADVTXD_STAT_SN_CRC	0x00000002 /* NXTSEQ/SEED prsnt in WB */
+#define IGC_ADVTXD_IDX_SHIFT		4  /* Adv desc Index shift */
+#define IGC_ADVTXD_POPTS_ISCO_1ST	0x00000000 /* 1st TSO of iSCSI PDU */
+#define IGC_ADVTXD_POPTS_ISCO_MDL	0x00000800 /* Middle TSO of iSCSI PDU */
+#define IGC_ADVTXD_POPTS_ISCO_LAST	0x00001000 /* Last TSO of iSCSI PDU */
+/* 1st & Last TSO-full iSCSI PDU*/
+#define IGC_ADVTXD_POPTS_ISCO_FULL	0x00001800
+#define IGC_ADVTXD_POPTS_IPSEC	0x00000400 /* IPSec offload request */
+#define IGC_ADVTXD_PAYLEN_SHIFT	14 /* Adv desc PAYLEN shift */
+
+/* Advanced Transmit Context Descriptor Config */
+#define IGC_ADVTXD_MACLEN_SHIFT	9  /* Adv ctxt desc mac len shift */
+#define IGC_ADVTXD_VLAN_SHIFT		16  /* Adv ctxt vlan tag shift */
+#define IGC_ADVTXD_TUCMD_IPV4		0x00000400  /* IP Packet Type: 1=IPv4 */
+#define IGC_ADVTXD_TUCMD_IPV6		0x00000000  /* IP Packet Type: 0=IPv6 */
+#define IGC_ADVTXD_TUCMD_L4T_UDP	0x00000000  /* L4 Packet TYPE of UDP */
+#define IGC_ADVTXD_TUCMD_L4T_TCP	0x00000800  /* L4 Packet TYPE of TCP */
+#define IGC_ADVTXD_TUCMD_L4T_SCTP	0x00001000  /* L4 Packet TYPE of SCTP */
+#define IGC_ADVTXD_TUCMD_IPSEC_TYPE_ESP	0x00002000 /* IPSec Type ESP */
+/* IPSec Encrypt Enable for ESP */
+#define IGC_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN	0x00004000
+/* Req requires Markers and CRC */
+#define IGC_ADVTXD_TUCMD_MKRREQ	0x00002000
+#define IGC_ADVTXD_L4LEN_SHIFT	8  /* Adv ctxt L4LEN shift */
+#define IGC_ADVTXD_MSS_SHIFT		16  /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+#define IGC_ADVTXD_IPSEC_SA_INDEX_MASK	0x000000FF
+/* Adv ctxt IPSec ESP len mask */
+#define IGC_ADVTXD_IPSEC_ESP_LEN_MASK		0x000000FF
+
+#define IGC_RAR_ENTRIES_BASE		16
+
+/* Receive Descriptor - Advanced */
+union igc_adv_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /*RSS type, Pkt type*/
+					/* Split Header, header buffer len */
+					__le16 hdr_info;
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Additional Transmit Descriptor Control definitions */
+#define IGC_TXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Tx Queue */
+
+/* Additional Receive Descriptor Control definitions */
+#define IGC_RXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Rx Queue */
+
+/* SRRCTL bit definitions */
+#define IGC_SRRCTL_BSIZEPKT_SHIFT		10 /* Shift _right_ */
+#define IGC_SRRCTL_BSIZEHDRSIZE_SHIFT		2  /* Shift _left_ */
+#define IGC_SRRCTL_DESCTYPE_ADV_ONEBUF	0x02000000
+
+#endif /* _IGC_BASE_H_ */
diff --git a/drivers/net/igc/base/igc_defines.h b/drivers/net/igc/base/igc_defines.h
new file mode 100644
index 0000000..b9e2916
--- /dev/null
+++ b/drivers/net/igc/base/igc_defines.h
@@ -0,0 +1,1649 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_DEFINES_H_
+#define _IGC_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define REQ_RX_DESCRIPTOR_MULTIPLE  8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IGC_WUC_APME		0x00000001 /* APM Enable */
+#define IGC_WUC_PME_EN	0x00000002 /* PME Enable */
+#define IGC_WUC_PME_STATUS	0x00000004 /* PME Status */
+#define IGC_WUC_APMPME	0x00000008 /* Assert PME on APM Wakeup */
+#define IGC_WUC_PHY_WAKE	0x00000100 /* if PHY supports wakeup */
+
+/* Wake Up Filter Control */
+#define IGC_WUFC_LNKC	0x00000001 /* Link Status Change Wakeup Enable */
+#define IGC_WUFC_MAG	0x00000002 /* Magic Packet Wakeup Enable */
+#define IGC_WUFC_EX	0x00000004 /* Directed Exact Wakeup Enable */
+#define IGC_WUFC_MC	0x00000008 /* Directed Multicast Wakeup Enable */
+#define IGC_WUFC_BC	0x00000010 /* Broadcast Wakeup Enable */
+#define IGC_WUFC_ARP	0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IGC_WUFC_IPV4	0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IGC_WUFC_FLX0		0x00010000 /* Flexible Filter 0 Enable */
+
+/* Wake Up Status */
+#define IGC_WUS_LNKC		IGC_WUFC_LNKC
+#define IGC_WUS_MAG		IGC_WUFC_MAG
+#define IGC_WUS_EX		IGC_WUFC_EX
+#define IGC_WUS_MC		IGC_WUFC_MC
+#define IGC_WUS_BC		IGC_WUFC_BC
+
+/* Extended Device Control */
+#define IGC_CTRL_EXT_LPCD		0x00000004 /* LCD Power Cycle Done */
+#define IGC_CTRL_EXT_SDP4_DATA	0x00000010 /* SW Definable Pin 4 data */
+#define IGC_CTRL_EXT_SDP6_DATA	0x00000040 /* SW Definable Pin 6 data */
+#define IGC_CTRL_EXT_SDP3_DATA	0x00000080 /* SW Definable Pin 3 data */
+/* SDP 4/5 (bits 8,9) are reserved in >= 82575 */
+#define IGC_CTRL_EXT_SDP4_DIR	0x00000100 /* Direction of SDP4 0=in 1=out */
+#define IGC_CTRL_EXT_SDP6_DIR	0x00000400 /* Direction of SDP6 0=in 1=out */
+#define IGC_CTRL_EXT_SDP3_DIR	0x00000800 /* Direction of SDP3 0=in 1=out */
+#define IGC_CTRL_EXT_FORCE_SMBUS	0x00000800 /* Force SMBus mode */
+#define IGC_CTRL_EXT_EE_RST	0x00002000 /* Reinitialize from EEPROM */
+/* Physical Func Reset Done Indication */
+#define IGC_CTRL_EXT_PFRSTD	0x00004000
+#define IGC_CTRL_EXT_SDLPE	0X00040000  /* SerDes Low Power Enable */
+#define IGC_CTRL_EXT_SPD_BYPS	0x00008000 /* Speed Select Bypass */
+#define IGC_CTRL_EXT_RO_DIS	0x00020000 /* Relaxed Ordering disable */
+#define IGC_CTRL_EXT_DMA_DYN_CLK_EN	0x00080000 /* DMA Dynamic Clk Gating */
+#define IGC_CTRL_EXT_LINK_MODE_MASK	0x00C00000
+/* Offset of the link mode field in Ctrl Ext register */
+#define IGC_CTRL_EXT_LINK_MODE_OFFSET	22
+#define IGC_CTRL_EXT_LINK_MODE_1000BASE_KX	0x00400000
+#define IGC_CTRL_EXT_LINK_MODE_GMII	0x00000000
+#define IGC_CTRL_EXT_LINK_MODE_PCIE_SERDES	0x00C00000
+#define IGC_CTRL_EXT_LINK_MODE_SGMII	0x00800000
+#define IGC_CTRL_EXT_EIAME		0x01000000
+#define IGC_CTRL_EXT_IRCA		0x00000001
+#define IGC_CTRL_EXT_DRV_LOAD		0x10000000 /* Drv loaded bit for FW */
+#define IGC_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */
+#define IGC_CTRL_EXT_PBA_CLR		0x80000000 /* PBA Clear */
+#define IGC_CTRL_EXT_LSECCK		0x00001000
+#define IGC_CTRL_EXT_PHYPDEN		0x00100000
+#define IGC_I2CCMD_REG_ADDR_SHIFT	16
+#define IGC_I2CCMD_PHY_ADDR_SHIFT	24
+#define IGC_I2CCMD_OPCODE_READ	0x08000000
+#define IGC_I2CCMD_OPCODE_WRITE	0x00000000
+#define IGC_I2CCMD_READY		0x20000000
+#define IGC_I2CCMD_ERROR		0x80000000
+#define IGC_I2CCMD_SFP_DATA_ADDR(a)	(0x0000 + (a))
+#define IGC_I2CCMD_SFP_DIAG_ADDR(a)	(0x0100 + (a))
+#define IGC_MAX_SGMII_PHY_REG_ADDR	255
+#define IGC_I2CCMD_PHY_TIMEOUT	200
+#define IGC_IVAR_VALID	0x80
+#define IGC_GPIE_NSICR	0x00000001
+#define IGC_GPIE_MSIX_MODE	0x00000010
+#define IGC_GPIE_EIAME	0x40000000
+#define IGC_GPIE_PBA		0x80000000
+
+/* Receive Descriptor bit definitions */
+#define IGC_RXD_STAT_DD	0x01    /* Descriptor Done */
+#define IGC_RXD_STAT_EOP	0x02    /* End of Packet */
+#define IGC_RXD_STAT_IXSM	0x04    /* Ignore checksum */
+#define IGC_RXD_STAT_VP	0x08    /* IEEE VLAN Packet */
+#define IGC_RXD_STAT_UDPCS	0x10    /* UDP xsum calculated */
+#define IGC_RXD_STAT_TCPCS	0x20    /* TCP xsum calculated */
+#define IGC_RXD_STAT_IPCS	0x40    /* IP xsum calculated */
+#define IGC_RXD_STAT_PIF	0x80    /* passed in-exact filter */
+#define IGC_RXD_STAT_IPIDV	0x200   /* IP identification valid */
+#define IGC_RXD_STAT_UDPV	0x400   /* Valid UDP checksum */
+#define IGC_RXD_STAT_DYNINT	0x800   /* Pkt caused INT via DYNINT */
+#define IGC_RXD_ERR_CE	0x01    /* CRC Error */
+#define IGC_RXD_ERR_SE	0x02    /* Symbol Error */
+#define IGC_RXD_ERR_SEQ	0x04    /* Sequence Error */
+#define IGC_RXD_ERR_CXE	0x10    /* Carrier Extension Error */
+#define IGC_RXD_ERR_TCPE	0x20    /* TCP/UDP Checksum Error */
+#define IGC_RXD_ERR_IPE	0x40    /* IP Checksum Error */
+#define IGC_RXD_ERR_RXE	0x80    /* Rx Data Error */
+#define IGC_RXD_SPC_VLAN_MASK	0x0FFF  /* VLAN ID is in lower 12 bits */
+
+#define IGC_RXDEXT_STATERR_TST	0x00000100 /* Time Stamp taken */
+#define IGC_RXDEXT_STATERR_LB		0x00040000
+#define IGC_RXDEXT_STATERR_CE		0x01000000
+#define IGC_RXDEXT_STATERR_SE		0x02000000
+#define IGC_RXDEXT_STATERR_SEQ	0x04000000
+#define IGC_RXDEXT_STATERR_CXE	0x10000000
+#define IGC_RXDEXT_STATERR_TCPE	0x20000000
+#define IGC_RXDEXT_STATERR_IPE	0x40000000
+#define IGC_RXDEXT_STATERR_RXE	0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define IGC_RXD_ERR_FRAME_ERR_MASK ( \
+	IGC_RXD_ERR_CE  |		\
+	IGC_RXD_ERR_SE  |		\
+	IGC_RXD_ERR_SEQ |		\
+	IGC_RXD_ERR_CXE |		\
+	IGC_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define IGC_RXDEXT_ERR_FRAME_ERR_MASK ( \
+	IGC_RXDEXT_STATERR_CE  |	\
+	IGC_RXDEXT_STATERR_SE  |	\
+	IGC_RXDEXT_STATERR_SEQ |	\
+	IGC_RXDEXT_STATERR_CXE |	\
+	IGC_RXDEXT_STATERR_RXE)
+
+#define IGC_MRQC_ENABLE_RSS_2Q		0x00000001
+#define IGC_MRQC_RSS_FIELD_MASK		0xFFFF0000
+#define IGC_MRQC_RSS_FIELD_IPV4_TCP		0x00010000
+#define IGC_MRQC_RSS_FIELD_IPV4		0x00020000
+#define IGC_MRQC_RSS_FIELD_IPV6_TCP_EX	0x00040000
+#define IGC_MRQC_RSS_FIELD_IPV6		0x00100000
+#define IGC_MRQC_RSS_FIELD_IPV6_TCP		0x00200000
+
+#define IGC_RXDPS_HDRSTAT_HDRSP		0x00008000
+
+/* Management Control */
+#define IGC_MANC_SMBUS_EN	0x00000001 /* SMBus Enabled - RO */
+#define IGC_MANC_ASF_EN	0x00000002 /* ASF Enabled - RO */
+#define IGC_MANC_ARP_EN	0x00002000 /* Enable ARP Request Filtering */
+#define IGC_MANC_RCV_TCO_EN	0x00020000 /* Receive TCO Packets Enabled */
+#define IGC_MANC_BLK_PHY_RST_ON_IDE	0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define IGC_MANC_EN_MAC_ADDR_FILTER	0x00100000
+/* Enable MNG packets to host memory */
+#define IGC_MANC_EN_MNG2HOST		0x00200000
+
+#define IGC_MANC2H_PORT_623		0x00000020 /* Port 0x26f */
+#define IGC_MANC2H_PORT_664		0x00000040 /* Port 0x298 */
+#define IGC_MDEF_PORT_623		0x00000800 /* Port 0x26f */
+#define IGC_MDEF_PORT_664		0x00000400 /* Port 0x298 */
+
+/* Receive Control */
+#define IGC_RCTL_RST		0x00000001 /* Software reset */
+#define IGC_RCTL_EN		0x00000002 /* enable */
+#define IGC_RCTL_SBP		0x00000004 /* store bad packet */
+#define IGC_RCTL_UPE		0x00000008 /* unicast promisc enable */
+#define IGC_RCTL_MPE		0x00000010 /* multicast promisc enable */
+#define IGC_RCTL_LPE		0x00000020 /* long packet enable */
+#define IGC_RCTL_LBM_NO	0x00000000 /* no loopback mode */
+#define IGC_RCTL_LBM_MAC	0x00000040 /* MAC loopback mode */
+#define IGC_RCTL_LBM_TCVR	0x000000C0 /* tcvr loopback mode */
+#define IGC_RCTL_DTYP_PS	0x00000400 /* Packet Split descriptor */
+#define IGC_RCTL_RDMTS_HALF	0x00000000 /* Rx desc min thresh size */
+#define IGC_RCTL_RDMTS_HEX	0x00010000
+#define IGC_RCTL_RDMTS1_HEX	IGC_RCTL_RDMTS_HEX
+#define IGC_RCTL_MO_SHIFT	12 /* multicast offset shift */
+#define IGC_RCTL_MO_3		0x00003000 /* multicast offset 15:4 */
+#define IGC_RCTL_BAM		0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if IGC_RCTL_BSEX is 0 */
+#define IGC_RCTL_SZ_2048	0x00000000 /* Rx buffer size 2048 */
+#define IGC_RCTL_SZ_1024	0x00010000 /* Rx buffer size 1024 */
+#define IGC_RCTL_SZ_512	0x00020000 /* Rx buffer size 512 */
+#define IGC_RCTL_SZ_256	0x00030000 /* Rx buffer size 256 */
+/* these buffer sizes are valid if IGC_RCTL_BSEX is 1 */
+#define IGC_RCTL_SZ_16384	0x00010000 /* Rx buffer size 16384 */
+#define IGC_RCTL_SZ_8192	0x00020000 /* Rx buffer size 8192 */
+#define IGC_RCTL_SZ_4096	0x00030000 /* Rx buffer size 4096 */
+#define IGC_RCTL_VFE		0x00040000 /* vlan filter enable */
+#define IGC_RCTL_CFIEN	0x00080000 /* canonical form enable */
+#define IGC_RCTL_CFI		0x00100000 /* canonical form indicator */
+#define IGC_RCTL_DPF		0x00400000 /* discard pause frames */
+#define IGC_RCTL_PMCF		0x00800000 /* pass MAC control frames */
+#define IGC_RCTL_BSEX		0x02000000 /* Buffer size extension */
+#define IGC_RCTL_SECRC	0x04000000 /* Strip Ethernet CRC */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ *     psrctl |= (((ROUNDUP(value0, 128) >> IGC_PSRCTL_BSIZE0_SHIFT) &
+ *		  IGC_PSRCTL_BSIZE0_MASK) |
+ *		((ROUNDUP(value1, 1024) >> IGC_PSRCTL_BSIZE1_SHIFT) &
+ *		  IGC_PSRCTL_BSIZE1_MASK) |
+ *		((ROUNDUP(value2, 1024) << IGC_PSRCTL_BSIZE2_SHIFT) &
+ *		  IGC_PSRCTL_BSIZE2_MASK) |
+ *		((ROUNDUP(value3, 1024) << IGC_PSRCTL_BSIZE3_SHIFT) |;
+ *		  IGC_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256],  default=256
+ *       value1 = [1024..64512], default=4096
+ *       value2 = [0..64512],    default=4096
+ *       value3 = [0..64512],    default=0
+ */
+
+#define IGC_PSRCTL_BSIZE0_MASK	0x0000007F
+#define IGC_PSRCTL_BSIZE1_MASK	0x00003F00
+#define IGC_PSRCTL_BSIZE2_MASK	0x003F0000
+#define IGC_PSRCTL_BSIZE3_MASK	0x3F000000
+
+#define IGC_PSRCTL_BSIZE0_SHIFT	7    /* Shift _right_ 7 */
+#define IGC_PSRCTL_BSIZE1_SHIFT	2    /* Shift _right_ 2 */
+#define IGC_PSRCTL_BSIZE2_SHIFT	6    /* Shift _left_ 6 */
+#define IGC_PSRCTL_BSIZE3_SHIFT	14   /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define IGC_SWFW_EEP_SM	0x01
+#define IGC_SWFW_PHY0_SM	0x02
+#define IGC_SWFW_PHY1_SM	0x04
+#define IGC_SWFW_CSR_SM	0x08
+#define IGC_SWFW_PHY2_SM	0x20
+#define IGC_SWFW_PHY3_SM	0x40
+#define IGC_SWFW_SW_MNG_SM	0x400
+
+/* Device Control */
+#define IGC_CTRL_FD		0x00000001  /* Full duplex.0=half; 1=full */
+#define IGC_CTRL_PRIOR	0x00000004  /* Priority on PCI. 0=rx,1=fair */
+#define IGC_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
+#define IGC_CTRL_LRST		0x00000008  /* Link reset. 0=normal,1=reset */
+#define IGC_CTRL_ASDE		0x00000020  /* Auto-speed detect enable */
+#define IGC_CTRL_SLU		0x00000040  /* Set link up (Force Link) */
+#define IGC_CTRL_ILOS		0x00000080  /* Invert Loss-Of Signal */
+#define IGC_CTRL_SPD_SEL	0x00000300  /* Speed Select Mask */
+#define IGC_CTRL_SPD_10	0x00000000  /* Force 10Mb */
+#define IGC_CTRL_SPD_100	0x00000100  /* Force 100Mb */
+#define IGC_CTRL_SPD_1000	0x00000200  /* Force 1Gb */
+#define IGC_CTRL_FRCSPD	0x00000800  /* Force Speed */
+#define IGC_CTRL_FRCDPX	0x00001000  /* Force Duplex */
+#define IGC_CTRL_LANPHYPC_OVERRIDE	0x00010000 /* SW control of LANPHYPC */
+#define IGC_CTRL_LANPHYPC_VALUE	0x00020000 /* SW value of LANPHYPC */
+#define IGC_CTRL_MEHE		0x00080000 /* Memory Error Handling Enable */
+#define IGC_CTRL_SWDPIN0	0x00040000 /* SWDPIN 0 value */
+#define IGC_CTRL_SWDPIN1	0x00080000 /* SWDPIN 1 value */
+#define IGC_CTRL_SWDPIN2	0x00100000 /* SWDPIN 2 value */
+#define IGC_CTRL_ADVD3WUC	0x00100000 /* D3 WUC */
+#define IGC_CTRL_EN_PHY_PWR_MGMT	0x00200000 /* PHY PM enable */
+#define IGC_CTRL_SWDPIN3	0x00200000 /* SWDPIN 3 value */
+#define IGC_CTRL_SWDPIO0	0x00400000 /* SWDPIN 0 Input or output */
+#define IGC_CTRL_SWDPIO2	0x01000000 /* SWDPIN 2 input or output */
+#define IGC_CTRL_SWDPIO3	0x02000000 /* SWDPIN 3 input or output */
+#define IGC_CTRL_DEV_RST	0x20000000 /* Device reset */
+#define IGC_CTRL_RST		0x04000000 /* Global reset */
+#define IGC_CTRL_RFCE		0x08000000 /* Receive Flow Control enable */
+#define IGC_CTRL_TFCE		0x10000000 /* Transmit flow control enable */
+#define IGC_CTRL_VME		0x40000000 /* IEEE VLAN mode enable */
+#define IGC_CTRL_PHY_RST	0x80000000 /* PHY Reset */
+#define IGC_CTRL_I2C_ENA	0x02000000 /* I2C enable */
+
+#define IGC_CTRL_MDIO_DIR		IGC_CTRL_SWDPIO2
+#define IGC_CTRL_MDIO			IGC_CTRL_SWDPIN2
+#define IGC_CTRL_MDC_DIR		IGC_CTRL_SWDPIO3
+#define IGC_CTRL_MDC			IGC_CTRL_SWDPIN3
+
+#define IGC_CONNSW_AUTOSENSE_EN	0x1
+#define IGC_CONNSW_ENRGSRC		0x4
+#define IGC_CONNSW_PHYSD		0x400
+#define IGC_CONNSW_PHY_PDN		0x800
+#define IGC_CONNSW_SERDESD		0x200
+#define IGC_CONNSW_AUTOSENSE_CONF	0x2
+#define IGC_PCS_CFG_PCS_EN		8
+#define IGC_PCS_LCTL_FLV_LINK_UP	1
+#define IGC_PCS_LCTL_FSV_10		0
+#define IGC_PCS_LCTL_FSV_100		2
+#define IGC_PCS_LCTL_FSV_1000		4
+#define IGC_PCS_LCTL_FDV_FULL		8
+#define IGC_PCS_LCTL_FSD		0x10
+#define IGC_PCS_LCTL_FORCE_LINK	0x20
+#define IGC_PCS_LCTL_FORCE_FCTRL	0x80
+#define IGC_PCS_LCTL_AN_ENABLE	0x10000
+#define IGC_PCS_LCTL_AN_RESTART	0x20000
+#define IGC_PCS_LCTL_AN_TIMEOUT	0x40000
+#define IGC_ENABLE_SERDES_LOOPBACK	0x0410
+
+#define IGC_PCS_LSTS_LINK_OK		1
+#define IGC_PCS_LSTS_SPEED_100	2
+#define IGC_PCS_LSTS_SPEED_1000	4
+#define IGC_PCS_LSTS_DUPLEX_FULL	8
+#define IGC_PCS_LSTS_SYNK_OK		0x10
+#define IGC_PCS_LSTS_AN_COMPLETE	0x10000
+
+/* Device Status */
+#define IGC_STATUS_FD			0x00000001 /* Duplex 0=half 1=full */
+#define IGC_STATUS_LU			0x00000002 /* Link up.0=no,1=link */
+#define IGC_STATUS_FUNC_MASK		0x0000000C /* PCI Function Mask */
+#define IGC_STATUS_FUNC_SHIFT		2
+#define IGC_STATUS_FUNC_1		0x00000004 /* Function 1 */
+#define IGC_STATUS_TXOFF		0x00000010 /* transmission paused */
+#define IGC_STATUS_SPEED_MASK	0x000000C0
+#define IGC_STATUS_SPEED_10		0x00000000 /* Speed 10Mb/s */
+#define IGC_STATUS_SPEED_100		0x00000040 /* Speed 100Mb/s */
+#define IGC_STATUS_SPEED_1000		0x00000080 /* Speed 1000Mb/s */
+/* Speed 2.5Gb/s indication for I225 */
+#define IGC_STATUS_SPEED_2500		0x00400000
+#define IGC_STATUS_LAN_INIT_DONE	0x00000200 /* Lan Init Compltn by NVM */
+#define IGC_STATUS_PHYRA		0x00000400 /* PHY Reset Asserted */
+#define IGC_STATUS_GIO_MASTER_ENABLE	0x00080000 /* Master request status */
+#define IGC_STATUS_PCI66		0x00000800 /* In 66Mhz slot */
+#define IGC_STATUS_BUS64		0x00001000 /* In 64 bit slot */
+#define IGC_STATUS_2P5_SKU		0x00001000 /* Val of 2.5GBE SKU strap */
+#define IGC_STATUS_2P5_SKU_OVER	0x00002000 /* Val of 2.5GBE SKU Over */
+#define IGC_STATUS_PCIX_MODE		0x00002000 /* PCI-X mode */
+#define IGC_STATUS_PCIX_SPEED		0x0000C000 /* PCI-X bus speed */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define IGC_STATUS_PCIX_SPEED_66	0x00000000 /* PCI-X bus spd 50-66MHz */
+#define IGC_STATUS_PCIX_SPEED_100	0x00004000 /* PCI-X bus spd 66-100MHz */
+#define IGC_STATUS_PCIX_SPEED_133	0x00008000 /* PCI-X bus spd 100-133MHz*/
+#define IGC_STATUS_PCIM_STATE		0x40000000 /* PCIm function state */
+
+#define SPEED_10	10
+#define SPEED_100	100
+#define SPEED_1000	1000
+#define SPEED_2500	2500
+#define HALF_DUPLEX	1
+#define FULL_DUPLEX	2
+
+#define PHY_FORCE_TIME	20
+
+#define ADVERTISE_10_HALF		0x0001
+#define ADVERTISE_10_FULL		0x0002
+#define ADVERTISE_100_HALF		0x0004
+#define ADVERTISE_100_FULL		0x0008
+#define ADVERTISE_1000_HALF		0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL		0x0020
+#define ADVERTISE_2500_HALF		0x0040 /* NOT used, just FYI */
+#define ADVERTISE_2500_FULL		0x0080
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define IGC_ALL_SPEED_DUPLEX	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define IGC_ALL_SPEED_DUPLEX_2500 ( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL | ADVERTISE_2500_FULL)
+#define IGC_ALL_NOT_GIG	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL)
+#define IGC_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define IGC_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define IGC_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT		IGC_ALL_SPEED_DUPLEX
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT_2500	IGC_ALL_SPEED_DUPLEX_2500
+
+/* LED Control */
+#define IGC_PHY_LED0_MODE_MASK	0x00000007
+#define IGC_PHY_LED0_IVRT		0x00000008
+#define IGC_PHY_LED0_MASK		0x0000001F
+
+#define IGC_LEDCTL_LED0_MODE_MASK	0x0000000F
+#define IGC_LEDCTL_LED0_MODE_SHIFT	0
+#define IGC_LEDCTL_LED0_IVRT		0x00000040
+#define IGC_LEDCTL_LED0_BLINK		0x00000080
+
+#define IGC_LEDCTL_MODE_LINK_UP	0x2
+#define IGC_LEDCTL_MODE_LED_ON	0xE
+#define IGC_LEDCTL_MODE_LED_OFF	0xF
+
+/* Transmit Descriptor bit definitions */
+#define IGC_TXD_DTYP_D	0x00100000 /* Data Descriptor */
+#define IGC_TXD_DTYP_C	0x00000000 /* Context Descriptor */
+#define IGC_TXD_POPTS_IXSM	0x01       /* Insert IP checksum */
+#define IGC_TXD_POPTS_TXSM	0x02       /* Insert TCP/UDP checksum */
+#define IGC_TXD_CMD_EOP	0x01000000 /* End of Packet */
+#define IGC_TXD_CMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IGC_TXD_CMD_IC	0x04000000 /* Insert Checksum */
+#define IGC_TXD_CMD_RS	0x08000000 /* Report Status */
+#define IGC_TXD_CMD_RPS	0x10000000 /* Report Packet Sent */
+#define IGC_TXD_CMD_DEXT	0x20000000 /* Desc extension (0 = legacy) */
+#define IGC_TXD_CMD_VLE	0x40000000 /* Add VLAN tag */
+#define IGC_TXD_CMD_IDE	0x80000000 /* Enable Tidv register */
+#define IGC_TXD_STAT_DD	0x00000001 /* Descriptor Done */
+#define IGC_TXD_STAT_EC	0x00000002 /* Excess Collisions */
+#define IGC_TXD_STAT_LC	0x00000004 /* Late Collisions */
+#define IGC_TXD_STAT_TU	0x00000008 /* Transmit underrun */
+#define IGC_TXD_CMD_TCP	0x01000000 /* TCP packet */
+#define IGC_TXD_CMD_IP	0x02000000 /* IP packet */
+#define IGC_TXD_CMD_TSE	0x04000000 /* TCP Seg enable */
+#define IGC_TXD_STAT_TC	0x00000004 /* Tx Underrun */
+#define IGC_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */
+
+/* Transmit Control */
+#define IGC_TCTL_EN		0x00000002 /* enable Tx */
+#define IGC_TCTL_PSP		0x00000008 /* pad short packets */
+#define IGC_TCTL_CT		0x00000ff0 /* collision threshold */
+#define IGC_TCTL_COLD		0x003ff000 /* collision distance */
+#define IGC_TCTL_RTLC		0x01000000 /* Re-transmit on late collision */
+#define IGC_TCTL_MULR		0x10000000 /* Multiple request support */
+
+/* Transmit Arbitration Count */
+#define IGC_TARC0_ENABLE	0x00000400 /* Enable Tx Queue 0 */
+
+/* SerDes Control */
+#define IGC_SCTL_DISABLE_SERDES_LOOPBACK	0x0400
+#define IGC_SCTL_ENABLE_SERDES_LOOPBACK	0x0410
+
+/* Receive Checksum Control */
+#define IGC_RXCSUM_IPOFL	0x00000100 /* IPv4 checksum offload */
+#define IGC_RXCSUM_TUOFL	0x00000200 /* TCP / UDP checksum offload */
+#define IGC_RXCSUM_CRCOFL	0x00000800 /* CRC32 offload enable */
+#define IGC_RXCSUM_IPPCSE	0x00001000 /* IP payload checksum enable */
+#define IGC_RXCSUM_PCSD	0x00002000 /* packet checksum disabled */
+
+/* GPY211 - I225 defines */
+#define GPY_MMD_MASK		0xFFFF0000
+#define GPY_MMD_SHIFT		16
+#define GPY_REG_MASK		0x0000FFFF
+/* Header split receive */
+#define IGC_RFCTL_NFSW_DIS		0x00000040
+#define IGC_RFCTL_NFSR_DIS		0x00000080
+#define IGC_RFCTL_ACK_DIS		0x00001000
+#define IGC_RFCTL_EXTEN		0x00008000
+#define IGC_RFCTL_IPV6_EX_DIS		0x00010000
+#define IGC_RFCTL_NEW_IPV6_EXT_DIS	0x00020000
+#define IGC_RFCTL_LEF			0x00040000
+
+/* Collision related configuration parameters */
+#define IGC_CT_SHIFT			4
+#define IGC_COLLISION_THRESHOLD	15
+#define IGC_COLLISION_DISTANCE	63
+#define IGC_COLD_SHIFT		12
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT		10
+#define DEFAULT_82543_TIPG_IPGT_FIBER	9
+#define DEFAULT_82543_TIPG_IPGT_COPPER	8
+
+#define IGC_TIPG_IPGT_MASK		0x000003FF
+
+#define DEFAULT_82542_TIPG_IPGR1	2
+#define DEFAULT_82543_TIPG_IPGR1	8
+#define IGC_TIPG_IPGR1_SHIFT		10
+
+#define DEFAULT_82542_TIPG_IPGR2	10
+#define DEFAULT_82543_TIPG_IPGR2	6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2	7
+#define IGC_TIPG_IPGR2_SHIFT		20
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE		0x8100  /* 802.3ac packet */
+
+#define ETHERNET_FCS_SIZE		4
+#define MAX_JUMBO_FRAME_SIZE		0x3F00
+/* The datasheet maximum supported RX size is 9.5KB (9728 bytes) */
+#define MAX_RX_JUMBO_FRAME_SIZE		0x2600
+#define IGC_TX_PTR_GAP		0x1F
+
+/* Extended Configuration Control and Size */
+#define IGC_EXTCNF_CTRL_MDIO_SW_OWNERSHIP	0x00000020
+#define IGC_EXTCNF_CTRL_LCD_WRITE_ENABLE	0x00000001
+#define IGC_EXTCNF_CTRL_OEM_WRITE_ENABLE	0x00000008
+#define IGC_EXTCNF_CTRL_SWFLAG		0x00000020
+#define IGC_EXTCNF_CTRL_GATE_PHY_CFG		0x00000080
+#define IGC_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK	0x00FF0000
+#define IGC_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT	16
+#define IGC_EXTCNF_CTRL_EXT_CNF_POINTER_MASK	0x0FFF0000
+#define IGC_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT	16
+
+#define IGC_PHY_CTRL_D0A_LPLU			0x00000002
+#define IGC_PHY_CTRL_NOND0A_LPLU		0x00000004
+#define IGC_PHY_CTRL_NOND0A_GBE_DISABLE	0x00000008
+#define IGC_PHY_CTRL_GBE_DISABLE		0x00000040
+
+#define IGC_KABGTXD_BGSQLBIAS			0x00050000
+
+/* Low Power IDLE Control */
+#define IGC_LPIC_LPIET_SHIFT		24	/* Low Power Idle Entry Time */
+
+/* PBA constants */
+#define IGC_PBA_8K		0x0008    /* 8KB */
+#define IGC_PBA_10K		0x000A    /* 10KB */
+#define IGC_PBA_12K		0x000C    /* 12KB */
+#define IGC_PBA_14K		0x000E    /* 14KB */
+#define IGC_PBA_16K		0x0010    /* 16KB */
+#define IGC_PBA_18K		0x0012
+#define IGC_PBA_20K		0x0014
+#define IGC_PBA_22K		0x0016
+#define IGC_PBA_24K		0x0018
+#define IGC_PBA_26K		0x001A
+#define IGC_PBA_30K		0x001E
+#define IGC_PBA_32K		0x0020
+#define IGC_PBA_34K		0x0022
+#define IGC_PBA_35K		0x0023
+#define IGC_PBA_38K		0x0026
+#define IGC_PBA_40K		0x0028
+#define IGC_PBA_48K		0x0030    /* 48KB */
+#define IGC_PBA_64K		0x0040    /* 64KB */
+
+#define IGC_PBA_RXA_MASK	0xFFFF
+
+#define IGC_PBS_16K		IGC_PBA_16K
+
+/* Uncorrectable/correctable ECC Error counts and enable bits */
+#define IGC_PBECCSTS_CORR_ERR_CNT_MASK	0x000000FF
+#define IGC_PBECCSTS_UNCORR_ERR_CNT_MASK	0x0000FF00
+#define IGC_PBECCSTS_UNCORR_ERR_CNT_SHIFT	8
+#define IGC_PBECCSTS_ECC_ENABLE		0x00010000
+
+#define IFS_MAX			80
+#define IFS_MIN			40
+#define IFS_RATIO		4
+#define IFS_STEP		10
+#define MIN_NUM_XMITS		1000
+
+/* SW Semaphore Register */
+#define IGC_SWSM_SMBI		0x00000001 /* Driver Semaphore bit */
+#define IGC_SWSM_SWESMBI	0x00000002 /* FW Semaphore bit */
+#define IGC_SWSM_DRV_LOAD	0x00000008 /* Driver Loaded Bit */
+
+#define IGC_SWSM2_LOCK	0x00000002 /* Secondary driver semaphore bit */
+
+/* Interrupt Cause Read */
+#define IGC_ICR_TXDW		0x00000001 /* Transmit desc written back */
+#define IGC_ICR_TXQE		0x00000002 /* Transmit Queue empty */
+#define IGC_ICR_LSC		0x00000004 /* Link Status Change */
+#define IGC_ICR_RXSEQ		0x00000008 /* Rx sequence error */
+#define IGC_ICR_RXDMT0	0x00000010 /* Rx desc min. threshold (0) */
+#define IGC_ICR_RXO		0x00000040 /* Rx overrun */
+#define IGC_ICR_RXT0		0x00000080 /* Rx timer intr (ring 0) */
+#define IGC_ICR_VMMB		0x00000100 /* VM MB event */
+#define IGC_ICR_RXCFG		0x00000400 /* Rx /c/ ordered set */
+#define IGC_ICR_GPI_EN0	0x00000800 /* GP Int 0 */
+#define IGC_ICR_GPI_EN1	0x00001000 /* GP Int 1 */
+#define IGC_ICR_GPI_EN2	0x00002000 /* GP Int 2 */
+#define IGC_ICR_GPI_EN3	0x00004000 /* GP Int 3 */
+#define IGC_ICR_TXD_LOW	0x00008000
+#define IGC_ICR_MNG		0x00040000 /* Manageability event */
+#define IGC_ICR_ECCER		0x00400000 /* Uncorrectable ECC Error */
+#define IGC_ICR_TS		0x00080000 /* Time Sync Interrupt */
+#define IGC_ICR_DRSTA		0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define IGC_ICR_INT_ASSERTED	0x80000000
+#define IGC_ICR_DOUTSYNC	0x10000000 /* NIC DMA out of sync */
+#define IGC_ICR_RXQ0		0x00100000 /* Rx Queue 0 Interrupt */
+#define IGC_ICR_RXQ1		0x00200000 /* Rx Queue 1 Interrupt */
+#define IGC_ICR_TXQ0		0x00400000 /* Tx Queue 0 Interrupt */
+#define IGC_ICR_TXQ1		0x00800000 /* Tx Queue 1 Interrupt */
+#define IGC_ICR_OTHER		0x01000000 /* Other Interrupts */
+#define IGC_ICR_FER		0x00400000 /* Fatal Error */
+
+#define IGC_ICR_THS		0x00800000 /* ICR.THS: Thermal Sensor Event*/
+#define IGC_ICR_MDDET		0x10000000 /* Malicious Driver Detect */
+
+/* PBA ECC Register */
+#define IGC_PBA_ECC_COUNTER_MASK	0xFFF00000 /* ECC counter mask */
+#define IGC_PBA_ECC_COUNTER_SHIFT	20 /* ECC counter shift value */
+#define IGC_PBA_ECC_CORR_EN	0x00000001 /* Enable ECC error correction */
+#define IGC_PBA_ECC_STAT_CLR	0x00000002 /* Clear ECC error counter */
+#define IGC_PBA_ECC_INT_EN	0x00000004 /* Enable ICR bit 5 on ECC error */
+
+/* Extended Interrupt Cause Read */
+#define IGC_EICR_RX_QUEUE0	0x00000001 /* Rx Queue 0 Interrupt */
+#define IGC_EICR_RX_QUEUE1	0x00000002 /* Rx Queue 1 Interrupt */
+#define IGC_EICR_RX_QUEUE2	0x00000004 /* Rx Queue 2 Interrupt */
+#define IGC_EICR_RX_QUEUE3	0x00000008 /* Rx Queue 3 Interrupt */
+#define IGC_EICR_TX_QUEUE0	0x00000100 /* Tx Queue 0 Interrupt */
+#define IGC_EICR_TX_QUEUE1	0x00000200 /* Tx Queue 1 Interrupt */
+#define IGC_EICR_TX_QUEUE2	0x00000400 /* Tx Queue 2 Interrupt */
+#define IGC_EICR_TX_QUEUE3	0x00000800 /* Tx Queue 3 Interrupt */
+#define IGC_EICR_TCP_TIMER	0x40000000 /* TCP Timer */
+#define IGC_EICR_OTHER	0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+#define IGC_TCPTIMER_KS	0x00000100 /* KickStart */
+#define IGC_TCPTIMER_COUNT_ENABLE	0x00000200 /* Count Enable */
+#define IGC_TCPTIMER_COUNT_FINISH	0x00000400 /* Count finish */
+#define IGC_TCPTIMER_LOOP	0x00000800 /* Loop */
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register.  Each bit is documented below:
+ *   o RXT0   = Receiver Timer Interrupt (ring 0)
+ *   o TXDW   = Transmit Descriptor Written Back
+ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ *   o RXSEQ  = Receive Sequence Error
+ *   o LSC    = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+	IGC_IMS_RXT0   |    \
+	IGC_IMS_TXDW   |    \
+	IGC_IMS_RXDMT0 |    \
+	IGC_IMS_RXSEQ  |    \
+	IGC_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define IGC_IMS_TXDW		IGC_ICR_TXDW    /* Tx desc written back */
+#define IGC_IMS_TXQE		IGC_ICR_TXQE    /* Transmit Queue empty */
+#define IGC_IMS_LSC		IGC_ICR_LSC     /* Link Status Change */
+#define IGC_IMS_VMMB		IGC_ICR_VMMB    /* Mail box activity */
+#define IGC_IMS_RXSEQ		IGC_ICR_RXSEQ   /* Rx sequence error */
+#define IGC_IMS_RXDMT0	IGC_ICR_RXDMT0  /* Rx desc min. threshold */
+#define IGC_QVECTOR_MASK	0x7FFC		/* Q-vector mask */
+#define IGC_ITR_VAL_MASK	0x04		/* ITR value mask */
+#define IGC_IMS_RXO		IGC_ICR_RXO     /* Rx overrun */
+#define IGC_IMS_RXT0		IGC_ICR_RXT0    /* Rx timer intr */
+#define IGC_IMS_TXD_LOW	IGC_ICR_TXD_LOW
+#define IGC_IMS_ECCER		IGC_ICR_ECCER   /* Uncorrectable ECC Error */
+#define IGC_IMS_TS		IGC_ICR_TS      /* Time Sync Interrupt */
+#define IGC_IMS_DRSTA		IGC_ICR_DRSTA   /* Device Reset Asserted */
+#define IGC_IMS_DOUTSYNC	IGC_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define IGC_IMS_RXQ0		IGC_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+#define IGC_IMS_RXQ1		IGC_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+#define IGC_IMS_TXQ0		IGC_ICR_TXQ0 /* Tx Queue 0 Interrupt */
+#define IGC_IMS_TXQ1		IGC_ICR_TXQ1 /* Tx Queue 1 Interrupt */
+#define IGC_IMS_OTHER		IGC_ICR_OTHER /* Other Interrupts */
+#define IGC_IMS_FER		IGC_ICR_FER /* Fatal Error */
+
+#define IGC_IMS_THS		IGC_ICR_THS /* ICR.TS: Thermal Sensor Event*/
+#define IGC_IMS_MDDET		IGC_ICR_MDDET /* Malicious Driver Detect */
+/* Extended Interrupt Mask Set */
+#define IGC_EIMS_RX_QUEUE0	IGC_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
+#define IGC_EIMS_RX_QUEUE1	IGC_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
+#define IGC_EIMS_RX_QUEUE2	IGC_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
+#define IGC_EIMS_RX_QUEUE3	IGC_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
+#define IGC_EIMS_TX_QUEUE0	IGC_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
+#define IGC_EIMS_TX_QUEUE1	IGC_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
+#define IGC_EIMS_TX_QUEUE2	IGC_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
+#define IGC_EIMS_TX_QUEUE3	IGC_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
+#define IGC_EIMS_TCP_TIMER	IGC_EICR_TCP_TIMER /* TCP Timer */
+#define IGC_EIMS_OTHER	IGC_EICR_OTHER   /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define IGC_ICS_LSC		IGC_ICR_LSC       /* Link Status Change */
+#define IGC_ICS_RXSEQ		IGC_ICR_RXSEQ     /* Rx sequence error */
+#define IGC_ICS_RXDMT0	IGC_ICR_RXDMT0    /* Rx desc min. threshold */
+#define IGC_ICS_DRSTA		IGC_ICR_DRSTA     /* Device Reset Aserted */
+
+/* Extended Interrupt Cause Set */
+#define IGC_EICS_RX_QUEUE0	IGC_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
+#define IGC_EICS_RX_QUEUE1	IGC_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
+#define IGC_EICS_RX_QUEUE2	IGC_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
+#define IGC_EICS_RX_QUEUE3	IGC_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
+#define IGC_EICS_TX_QUEUE0	IGC_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
+#define IGC_EICS_TX_QUEUE1	IGC_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
+#define IGC_EICS_TX_QUEUE2	IGC_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
+#define IGC_EICS_TX_QUEUE3	IGC_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
+#define IGC_EICS_TCP_TIMER	IGC_EICR_TCP_TIMER /* TCP Timer */
+#define IGC_EICS_OTHER	IGC_EICR_OTHER   /* Interrupt Cause Active */
+
+#define IGC_EITR_ITR_INT_MASK	0x0000FFFF
+#define IGC_EITR_INTERVAL 0x00007FFC
+/* IGC_EITR_CNT_IGNR is only for 82576 and newer */
+#define IGC_EITR_CNT_IGNR	0x80000000 /* Don't reset counters on write */
+
+/* Transmit Descriptor Control */
+#define IGC_TXDCTL_PTHRESH	0x0000003F /* TXDCTL Prefetch Threshold */
+#define IGC_TXDCTL_HTHRESH	0x00003F00 /* TXDCTL Host Threshold */
+#define IGC_TXDCTL_WTHRESH	0x003F0000 /* TXDCTL Writeback Threshold */
+#define IGC_TXDCTL_GRAN	0x01000000 /* TXDCTL Granularity */
+#define IGC_TXDCTL_FULL_TX_DESC_WB	0x01010000 /* GRAN=1, WTHRESH=1 */
+#define IGC_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of descriptors still to be processed. */
+#define IGC_TXDCTL_COUNT_DESC	0x00400000
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW	0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH	0x00000100
+#define FLOW_CONTROL_TYPE		0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE			4    /* 802.3ac tag (not DMA'd) */
+#define IGC_VLAN_FILTER_TBL_SIZE	128  /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots.  However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define IGC_RAR_ENTRIES	15
+#define IGC_RAH_AV		0x80000000 /* Receive descriptor valid */
+#define IGC_RAL_MAC_ADDR_LEN	4
+#define IGC_RAH_MAC_ADDR_LEN	2
+#define IGC_RAH_QUEUE_MASK_82575	0x000C0000
+#define IGC_RAH_POOL_1	0x00040000
+
+/* Error Codes */
+#define IGC_SUCCESS			0
+#define IGC_ERR_NVM			1
+#define IGC_ERR_PHY			2
+#define IGC_ERR_CONFIG		3
+#define IGC_ERR_PARAM			4
+#define IGC_ERR_MAC_INIT		5
+#define IGC_ERR_PHY_TYPE		6
+#define IGC_ERR_RESET			9
+#define IGC_ERR_MASTER_REQUESTS_PENDING	10
+#define IGC_ERR_HOST_INTERFACE_COMMAND	11
+#define IGC_BLK_PHY_RESET		12
+#define IGC_ERR_SWFW_SYNC		13
+#define IGC_NOT_IMPLEMENTED		14
+#define IGC_ERR_MBX			15
+#define IGC_ERR_INVALID_ARGUMENT	16
+#define IGC_ERR_NO_SPACE		17
+#define IGC_ERR_NVM_PBA_SECTION	18
+#define IGC_ERR_I2C			19
+#define IGC_ERR_INVM_VALUE_NOT_FOUND	20
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT		50
+#define COPPER_LINK_UP_LIMIT		10
+#define PHY_AUTO_NEG_LIMIT		45
+#define PHY_FORCE_LIMIT			20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT		800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT			100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+#define MDIO_OWNERSHIP_TIMEOUT		10
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT		10
+
+/* Flow Control */
+#define IGC_FCRTH_RTH		0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define IGC_FCRTL_RTL		0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define IGC_FCRTL_XONE	0x80000000 /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define IGC_TXCW_FD		0x00000020 /* TXCW full duplex */
+#define IGC_TXCW_PAUSE	0x00000080 /* TXCW sym pause request */
+#define IGC_TXCW_ASM_DIR	0x00000100 /* TXCW astm pause direction */
+#define IGC_TXCW_PAUSE_MASK	0x00000180 /* TXCW pause request mask */
+#define IGC_TXCW_ANE		0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define IGC_RXCW_CW		0x0000ffff /* RxConfigWord mask */
+#define IGC_RXCW_IV		0x08000000 /* Receive config invalid */
+#define IGC_RXCW_C		0x20000000 /* Receive config */
+#define IGC_RXCW_SYNCH	0x40000000 /* Receive config synch */
+
+#define IGC_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
+#define IGC_TSYNCTXCTL_ENABLED	0x00000010 /* enable Tx timestamping */
+
+/* HH Time Sync */
+#define IGC_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK	0x0000F000 /* max delay */
+#define IGC_TSYNCTXCTL_SYNC_COMP_ERR		0x20000000 /* sync err */
+#define IGC_TSYNCTXCTL_SYNC_COMP		0x40000000 /* sync complete */
+#define IGC_TSYNCTXCTL_START_SYNC		0x80000000 /* initiate sync */
+
+#define IGC_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
+#define IGC_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
+#define IGC_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define IGC_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define IGC_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define IGC_TSYNCRXCTL_TYPE_ALL	0x08
+#define IGC_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define IGC_TSYNCRXCTL_ENABLED	0x00000010 /* enable Rx timestamping */
+#define IGC_TSYNCRXCTL_SYSCFI		0x00000020 /* Sys clock frequency */
+
+#define IGC_RXMTRL_PTP_V1_SYNC_MESSAGE	0x00000000
+#define IGC_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE	0x00010000
+
+#define IGC_RXMTRL_PTP_V2_SYNC_MESSAGE	0x00000000
+#define IGC_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE	0x01000000
+
+#define IGC_TSYNCRXCFG_PTP_V1_CTRLT_MASK		0x000000FF
+#define IGC_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE		0x00
+#define IGC_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE	0x01
+#define IGC_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE	0x02
+#define IGC_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE	0x03
+#define IGC_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE	0x04
+
+#define IGC_TSYNCRXCFG_PTP_V2_MSGID_MASK		0x00000F00
+#define IGC_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE		0x0000
+#define IGC_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE	0x0100
+#define IGC_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE	0x0200
+#define IGC_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE	0x0300
+#define IGC_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE	0x0800
+#define IGC_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE	0x0900
+#define IGC_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define IGC_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE	0x0B00
+#define IGC_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE	0x0C00
+#define IGC_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE	0x0D00
+
+#define IGC_TIMINCA_16NS_SHIFT	24
+#define IGC_TIMINCA_INCPERIOD_SHIFT	24
+#define IGC_TIMINCA_INCVALUE_MASK	0x00FFFFFF
+
+/* Time Sync Interrupt Cause/Mask Register Bits */
+#define TSINTR_SYS_WRAP	(1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS	(1 << 1) /* Transmit Timestamp. */
+#define TSINTR_TT0	(1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1	(1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0	(1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1	(1 << 6) /* Auxiliary Timestamp 1 Taken. */
+
+#define TSYNC_INTERRUPTS	TSINTR_TXTS
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0	(1 << 0)  /* Enable target time 0. */
+#define TSAUXC_EN_TT1	(1 << 1)  /* Enable target time 1. */
+#define TSAUXC_EN_CLK0	(1 << 2)  /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_ST0	(1 << 4)  /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1	(1 << 5)  /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_ST1	(1 << 7)  /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0	(1 << 8)  /* Enable hardware timestamp 0. */
+#define TSAUXC_EN_TS1	(1 << 10) /* Enable hardware timestamp 0. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0	(0u << 0)  /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1	(1u << 0)  /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2	(2u << 0)  /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3	(3u << 0)  /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN	(1u << 2)  /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0	(0u << 3)  /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1	(1u << 3)  /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2	(2u << 3)  /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3	(3u << 3)  /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN	(1u << 5)  /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_EN	(1u << 8)  /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_EN	(1u << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_EN	(1u << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_EN	(1u << 17) /* SDP3 is assigned to Tsync. */
+#define TS_SDP0_SEL_TT0	(0u << 6)  /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1	(1u << 6)  /* Target time 1 is output on SDP0. */
+#define TS_SDP1_SEL_TT0	(0u << 9)  /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1	(1u << 9)  /* Target time 1 is output on SDP1. */
+#define TS_SDP0_SEL_FC0	(2u << 6)  /* Freq clock  0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1	(3u << 6)  /* Freq clock  1 is output on SDP0. */
+#define TS_SDP1_SEL_FC0	(2u << 9)  /* Freq clock  0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1	(3u << 9)  /* Freq clock  1 is output on SDP1. */
+#define TS_SDP2_SEL_TT0	(0u << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1	(1u << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0	(2u << 12) /* Freq clock  0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1	(3u << 12) /* Freq clock  1 is output on SDP2. */
+#define TS_SDP3_SEL_TT0	(0u << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1	(1u << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0	(2u << 15) /* Freq clock  0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1	(3u << 15) /* Freq clock  1 is output on SDP3. */
+
+#define IGC_CTRL_SDP0_DIR	0x00400000  /* SDP0 Data direction */
+#define IGC_CTRL_SDP1_DIR	0x00800000  /* SDP1 Data direction */
+
+/* Extended Device Control */
+#define IGC_CTRL_EXT_SDP2_DIR	0x00000400 /* SDP2 Data direction */
+
+/* ETQF register bit definitions */
+#define IGC_ETQF_1588			(1 << 30)
+#define IGC_FTQF_VF_BP		0x00008000
+#define IGC_FTQF_1588_TIME_STAMP	0x08000000
+#define IGC_FTQF_MASK			0xF0000000
+#define IGC_FTQF_MASK_PROTO_BP	0x10000000
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IGC_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
+#define IGC_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
+
+#define IGC_RXDADV_STAT_TSIP		0x08000 /* timestamp in packet */
+#define IGC_TSICR_TXTS		0x00000002
+#define IGC_TSIM_TXTS			0x00000002
+/* TUPLE Filtering Configuration */
+#define IGC_TTQF_DISABLE_MASK		0xF0008000 /* TTQF Disable Mask */
+#define IGC_TTQF_QUEUE_ENABLE		0x100   /* TTQF Queue Enable Bit */
+#define IGC_TTQF_PROTOCOL_MASK	0xFF    /* TTQF Protocol Mask */
+/* TTQF TCP Bit, shift with IGC_TTQF_PROTOCOL SHIFT */
+#define IGC_TTQF_PROTOCOL_TCP		0x0
+/* TTQF UDP Bit, shift with IGC_TTQF_PROTOCOL_SHIFT */
+#define IGC_TTQF_PROTOCOL_UDP		0x1
+/* TTQF SCTP Bit, shift with IGC_TTQF_PROTOCOL_SHIFT */
+#define IGC_TTQF_PROTOCOL_SCTP	0x2
+#define IGC_TTQF_PROTOCOL_SHIFT	5       /* TTQF Protocol Shift */
+#define IGC_TTQF_QUEUE_SHIFT		16      /* TTQF Queue Shfit */
+#define IGC_TTQF_RX_QUEUE_MASK	0x70000 /* TTQF Queue Mask */
+#define IGC_TTQF_MASK_ENABLE		0x10000000 /* TTQF Mask Enable Bit */
+#define IGC_IMIR_CLEAR_MASK		0xF001FFFF /* IMIR Reg Clear Mask */
+#define IGC_IMIR_PORT_BYPASS		0x20000 /* IMIR Port Bypass Bit */
+#define IGC_IMIR_PRIORITY_SHIFT	29 /* IMIR Priority Shift */
+#define IGC_IMIREXT_CLEAR_MASK	0x7FFFF /* IMIREXT Reg Clear Mask */
+
+#define IGC_MDICNFG_EXT_MDIO		0x80000000 /* MDI ext/int destination */
+#define IGC_MDICNFG_COM_MDIO		0x40000000 /* MDI shared w/ lan 0 */
+#define IGC_MDICNFG_PHY_MASK		0x03E00000
+#define IGC_MDICNFG_PHY_SHIFT		21
+
+#define IGC_MEDIA_PORT_COPPER			1
+#define IGC_MEDIA_PORT_OTHER			2
+#define IGC_M88E1112_AUTO_COPPER_SGMII	0x2
+#define IGC_M88E1112_AUTO_COPPER_BASEX	0x3
+#define IGC_M88E1112_STATUS_LINK		0x0004 /* Interface Link Bit */
+#define IGC_M88E1112_MAC_CTRL_1		0x10
+#define IGC_M88E1112_MAC_CTRL_1_MODE_MASK	0x0380 /* Mode Select */
+#define IGC_M88E1112_MAC_CTRL_1_MODE_SHIFT	7
+#define IGC_M88E1112_PAGE_ADDR		0x16
+#define IGC_M88E1112_STATUS			0x01
+
+#define IGC_THSTAT_LOW_EVENT		0x20000000 /* Low thermal threshold */
+#define IGC_THSTAT_MID_EVENT		0x00200000 /* Mid thermal threshold */
+#define IGC_THSTAT_HIGH_EVENT		0x00002000 /* High thermal threshold */
+#define IGC_THSTAT_PWR_DOWN		0x00000001 /* Power Down Event */
+#define IGC_THSTAT_LINK_THROTTLE	0x00000002 /* Link Spd Throttle Event */
+
+/* EEE defines */
+#define IGC_IPCNFG_EEE_2_5G_AN	0x00000010 /* IPCNFG EEE Ena 2.5G AN */
+#define IGC_IPCNFG_EEE_1G_AN		0x00000008 /* IPCNFG EEE Ena 1G AN */
+#define IGC_IPCNFG_EEE_100M_AN	0x00000004 /* IPCNFG EEE Ena 100M AN */
+#define IGC_EEER_TX_LPI_EN		0x00010000 /* EEER Tx LPI Enable */
+#define IGC_EEER_RX_LPI_EN		0x00020000 /* EEER Rx LPI Enable */
+#define IGC_EEER_LPI_FC		0x00040000 /* EEER Ena on Flow Cntrl */
+/* EEE status */
+#define IGC_EEER_EEE_NEG		0x20000000 /* EEE capability nego */
+#define IGC_EEER_RX_LPI_STATUS	0x40000000 /* Rx in LPI state */
+#define IGC_EEER_TX_LPI_STATUS	0x80000000 /* Tx in LPI state */
+#define IGC_EEE_LP_ADV_ADDR_I350	0x040F     /* EEE LP Advertisement */
+#define IGC_M88E1543_PAGE_ADDR	0x16       /* Page Offset Register */
+#define IGC_M88E1543_EEE_CTRL_1	0x0
+#define IGC_M88E1543_EEE_CTRL_1_MS	0x0001     /* EEE Master/Slave */
+#define IGC_M88E1543_FIBER_CTRL	0x0        /* Fiber Control Register */
+#define IGC_EEE_ADV_DEV_I354		7
+#define IGC_EEE_ADV_ADDR_I354		60
+#define IGC_EEE_ADV_100_SUPPORTED	(1 << 1)   /* 100BaseTx EEE Supported */
+#define IGC_EEE_ADV_1000_SUPPORTED	(1 << 2)   /* 1000BaseT EEE Supported */
+#define IGC_PCS_STATUS_DEV_I354	3
+#define IGC_PCS_STATUS_ADDR_I354	1
+#define IGC_PCS_STATUS_RX_LPI_RCVD	0x0400
+#define IGC_PCS_STATUS_TX_LPI_RCVD	0x0800
+#define IGC_M88E1512_CFG_REG_1	0x0010
+#define IGC_M88E1512_CFG_REG_2	0x0011
+#define IGC_M88E1512_CFG_REG_3	0x0007
+#define IGC_M88E1512_MODE		0x0014
+#define IGC_EEE_SU_LPI_CLK_STP	0x00800000 /* EEE LPI Clock Stop */
+#define IGC_EEE_LP_ADV_DEV_I210	7          /* EEE LP Adv Device */
+#define IGC_EEE_LP_ADV_ADDR_I210	61         /* EEE LP Adv Register */
+#define IGC_EEE_SU_LPI_CLK_STP	0x00800000 /* EEE LPI Clock Stop */
+#define IGC_EEE_LP_ADV_DEV_I225	7          /* EEE LP Adv Device */
+#define IGC_EEE_LP_ADV_ADDR_I225	61         /* EEE LP Adv Register */
+
+/* PCI Express Control */
+#define IGC_GCR_RXD_NO_SNOOP		0x00000001
+#define IGC_GCR_RXDSCW_NO_SNOOP	0x00000002
+#define IGC_GCR_RXDSCR_NO_SNOOP	0x00000004
+#define IGC_GCR_TXD_NO_SNOOP		0x00000008
+#define IGC_GCR_TXDSCW_NO_SNOOP	0x00000010
+#define IGC_GCR_TXDSCR_NO_SNOOP	0x00000020
+#define IGC_GCR_CMPL_TMOUT_MASK	0x0000F000
+#define IGC_GCR_CMPL_TMOUT_10ms	0x00001000
+#define IGC_GCR_CMPL_TMOUT_RESEND	0x00010000
+#define IGC_GCR_CAP_VER2		0x00040000
+
+#define PCIE_NO_SNOOP_ALL	(IGC_GCR_RXD_NO_SNOOP | \
+				 IGC_GCR_RXDSCW_NO_SNOOP | \
+				 IGC_GCR_RXDSCR_NO_SNOOP | \
+				 IGC_GCR_TXD_NO_SNOOP    | \
+				 IGC_GCR_TXDSCW_NO_SNOOP | \
+				 IGC_GCR_TXDSCR_NO_SNOOP)
+
+#define IGC_MMDAC_FUNC_DATA	0x4000 /* Data, no post increment */
+
+/* mPHY address control and data registers */
+#define IGC_MPHY_ADDR_CTL		0x0024 /* Address Control Reg */
+#define IGC_MPHY_ADDR_CTL_OFFSET_MASK	0xFFFF0000
+#define IGC_MPHY_DATA			0x0E10 /* Data Register */
+
+/* AFE CSR Offset for PCS CLK */
+#define IGC_MPHY_PCS_CLK_REG_OFFSET	0x0004
+/* Override for near end digital loopback. */
+#define IGC_MPHY_PCS_CLK_REG_DIGINELBEN	0x10
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB	0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE	0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX	0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG	0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE		0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN	0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB	0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK		0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET		0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000	0x0040
+#define MII_CR_SPEED_100	0x2000
+#define MII_CR_SPEED_10		0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS	0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT	0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS	0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT	0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE	0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS	0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS	0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS	0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS	0x0800 /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS	0x1000 /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS	0x2000 /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS	0x4000 /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS	0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD	0x0001   /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS	0x0020   /* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS	0x0040   /* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS	0x0080   /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS	0x0100   /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS	0x0200   /* 100T4 Capable */
+#define NWAY_AR_PAUSE		0x0400   /* Pause operation desired */
+#define NWAY_AR_ASM_DIR		0x0800   /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT	0x2000   /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE	0x8000   /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD	0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS		0x0020 /* LP 10T Half Dplx Capable */
+#define NWAY_LPAR_10T_FD_CAPS		0x0040 /* LP 10T Full Dplx Capable */
+#define NWAY_LPAR_100TX_HD_CAPS		0x0080 /* LP 100TX Half Dplx Capable */
+#define NWAY_LPAR_100TX_FD_CAPS		0x0100 /* LP 100TX Full Dplx Capable */
+#define NWAY_LPAR_100T4_CAPS		0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE			0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR		0x0800 /* LP Asym Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT		0x2000 /* LP detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE		0x4000 /* LP rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE		0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS		0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD		0x0002 /* LP 10T Half Dplx Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS		0x0004 /* LP 10T Full Dplx Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS	0x0008 /* LP 100TX Half Dplx Capable */
+#define NWAY_ER_PAR_DETECT_FAULT	0x0010 /* LP 100TX Full Dplx Capable */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE	0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS	0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS	0x0200 /* Advertise 1000T FD capability  */
+/* 1=Repeater/switch device port 0=DTE device */
+#define CR_1000T_REPEATER_DTE	0x0400
+/* 1=Configure PHY as Master 0=Configure PHY as Slave */
+#define CR_1000T_MS_VALUE	0x0800
+/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+#define CR_1000T_MS_ENABLE	0x1000
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1	0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2	0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3	0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4	0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT		0x00FF /* Num idle err since last rd */
+#define SR_1000T_ASYM_PAUSE_DIR		0x0100 /* LP asym pause direction bit */
+#define SR_1000T_LP_HD_CAPS		0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS		0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS	0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS	0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES		0x4000 /* 1=Local Tx Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT	0x8000 /* Master/Slave config fault */
+
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT	5
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL		0x00 /* Control Register */
+#define PHY_STATUS		0x01 /* Status Register */
+#define PHY_ID1			0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2			0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV		0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY		0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP		0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX	0x07 /* Next Page Tx */
+#define PHY_LP_NEXT_PAGE	0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL		0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS	0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS		0x0F /* Extended Status Reg */
+
+/* PHY GPY 211 registers */
+#define STANDARD_AN_REG_MASK	0x0007 /* MMD */
+#define ANEG_MULTIGBT_AN_CTRL	0x0020 /* MULTI GBT AN Control Register */
+#define MMD_DEVADDR_SHIFT	16     /* Shift MMD to higher bits */
+#define CR_2500T_FD_CAPS	0x0080 /* Advertise 2500T FD capability */
+
+#define PHY_CONTROL_LB		0x4000 /* PHY Loopback bit */
+
+/* NVM Control */
+#define IGC_EECD_SK		0x00000001 /* NVM Clock */
+#define IGC_EECD_CS		0x00000002 /* NVM Chip Select */
+#define IGC_EECD_DI		0x00000004 /* NVM Data In */
+#define IGC_EECD_DO		0x00000008 /* NVM Data Out */
+#define IGC_EECD_REQ		0x00000040 /* NVM Access Request */
+#define IGC_EECD_GNT		0x00000080 /* NVM Access Grant */
+#define IGC_EECD_PRES		0x00000100 /* NVM Present */
+#define IGC_EECD_SIZE		0x00000200 /* NVM Size (0=64 word 1=256 word) */
+#define IGC_EECD_BLOCKED	0x00008000 /* Bit banging access blocked flag */
+#define IGC_EECD_ABORT	0x00010000 /* NVM operation aborted flag */
+#define IGC_EECD_TIMEOUT	0x00020000 /* NVM read operation timeout flag */
+#define IGC_EECD_ERROR_CLR	0x00040000 /* NVM error status clear bit */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define IGC_EECD_ADDR_BITS	0x00000400
+#define IGC_EECD_TYPE		0x00002000 /* NVM Type (1-SPI, 0-Microwire) */
+#define IGC_NVM_GRANT_ATTEMPTS	1000 /* NVM # attempts to gain grant */
+#define IGC_EECD_AUTO_RD		0x00000200  /* NVM Auto Read done */
+#define IGC_EECD_SIZE_EX_MASK		0x00007800  /* NVM Size */
+#define IGC_EECD_SIZE_EX_SHIFT	11
+#define IGC_EECD_FLUPD		0x00080000 /* Update FLASH */
+#define IGC_EECD_AUPDEN		0x00100000 /* Ena Auto FLASH update */
+#define IGC_EECD_SEC1VAL		0x00400000 /* Sector One Valid */
+#define IGC_EECD_SEC1VAL_VALID_MASK	(IGC_EECD_AUTO_RD | IGC_EECD_PRES)
+#define IGC_EECD_FLUPD_I210		0x00800000 /* Update FLASH */
+#define IGC_EECD_FLUDONE_I210		0x04000000 /* Update FLASH done */
+#define IGC_EECD_FLASH_DETECTED_I210	0x00080000 /* FLASH detected */
+#define IGC_EECD_SEC1VAL_I210		0x02000000 /* Sector One Valid */
+#define IGC_FLUDONE_ATTEMPTS		20000
+#define IGC_EERD_EEWR_MAX_COUNT	512 /* buffered EEPROM words rw */
+#define IGC_I210_FIFO_SEL_RX		0x00
+#define IGC_I210_FIFO_SEL_TX_QAV(_i)	(0x02 + (_i))
+#define IGC_I210_FIFO_SEL_TX_LEGACY	IGC_I210_FIFO_SEL_TX_QAV(0)
+#define IGC_I210_FIFO_SEL_BMC2OS_TX	0x06
+#define IGC_I210_FIFO_SEL_BMC2OS_RX	0x01
+
+#define IGC_I210_FLASH_SECTOR_SIZE	0x1000 /* 4KB FLASH sector unit size */
+/* Secure FLASH mode requires removing MSb */
+#define IGC_I210_FW_PTR_MASK		0x7FFF
+/* Firmware code revision field word offset*/
+#define IGC_I210_FW_VER_OFFSET	328
+
+#define IGC_EECD_FLUPD_I225		0x00800000 /* Update FLASH */
+#define IGC_EECD_FLUDONE_I225		0x04000000 /* Update FLASH done */
+#define IGC_EECD_FLASH_DETECTED_I225	0x00080000 /* FLASH detected */
+#define IGC_FLUDONE_ATTEMPTS		20000
+#define IGC_EERD_EEWR_MAX_COUNT	512 /* buffered EEPROM words rw */
+#define IGC_EECD_SEC1VAL_I225		0x02000000 /* Sector One Valid */
+#define IGC_FLSECU_BLK_SW_ACCESS_I225	0x00000004 /* Block SW access */
+#define IGC_FWSM_FW_VALID_I225	0x8000 /* FW valid bit */
+
+#define IGC_NVM_RW_REG_DATA	16  /* Offset to data in NVM read/write regs */
+#define IGC_NVM_RW_REG_DONE	2   /* Offset to READ/WRITE done bit */
+#define IGC_NVM_RW_REG_START	1   /* Start operation */
+#define IGC_NVM_RW_ADDR_SHIFT	2   /* Shift to the address bits */
+#define IGC_NVM_POLL_WRITE	1   /* Flag for polling for write complete */
+#define IGC_NVM_POLL_READ	0   /* Flag for polling for read complete */
+#define IGC_FLASH_UPDATES	2000
+
+/* NVM Word Offsets */
+#define NVM_COMPAT			0x0003
+#define NVM_ID_LED_SETTINGS		0x0004
+#define NVM_VERSION			0x0005
+#define NVM_SERDES_AMPLITUDE		0x0006 /* SERDES output amplitude */
+#define NVM_PHY_CLASS_WORD		0x0007
+#define IGC_I210_NVM_FW_MODULE_PTR	0x0010
+#define IGC_I350_NVM_FW_MODULE_PTR	0x0051
+#define NVM_FUTURE_INIT_WORD1		0x0019
+#define NVM_ETRACK_WORD			0x0042
+#define NVM_ETRACK_HIWORD		0x0043
+#define NVM_COMB_VER_OFF		0x0083
+#define NVM_COMB_VER_PTR		0x003d
+
+/* NVM version defines */
+#define NVM_MAJOR_MASK			0xF000
+#define NVM_MINOR_MASK			0x0FF0
+#define NVM_IMAGE_ID_MASK		0x000F
+#define NVM_COMB_VER_MASK		0x00FF
+#define NVM_MAJOR_SHIFT			12
+#define NVM_MINOR_SHIFT			4
+#define NVM_COMB_VER_SHFT		8
+#define NVM_VER_INVALID			0xFFFF
+#define NVM_ETRACK_SHIFT		16
+#define NVM_ETRACK_VALID		0x8000
+#define NVM_NEW_DEC_MASK		0x0F00
+#define NVM_HEX_CONV			16
+#define NVM_HEX_TENS			10
+
+/* FW version defines */
+/* Offset of "Loader patch ptr" in Firmware Header */
+#define IGC_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET	0x01
+/* Patch generation hour & minutes */
+#define IGC_I350_NVM_FW_VER_WORD1_OFFSET		0x04
+/* Patch generation month & day */
+#define IGC_I350_NVM_FW_VER_WORD2_OFFSET		0x05
+/* Patch generation year */
+#define IGC_I350_NVM_FW_VER_WORD3_OFFSET		0x06
+/* Patch major & minor numbers */
+#define IGC_I350_NVM_FW_VER_WORD4_OFFSET		0x07
+
+#define NVM_MAC_ADDR			0x0000
+#define NVM_SUB_DEV_ID			0x000B
+#define NVM_SUB_VEN_ID			0x000C
+#define NVM_DEV_ID			0x000D
+#define NVM_VEN_ID			0x000E
+#define NVM_INIT_CTRL_2			0x000F
+#define NVM_INIT_CTRL_4			0x0013
+#define NVM_LED_1_CFG			0x001C
+#define NVM_LED_0_2_CFG			0x001F
+
+#define NVM_COMPAT_VALID_CSUM		0x0001
+#define NVM_FUTURE_INIT_WORD1_VALID_CSUM	0x0040
+
+#define NVM_INIT_CONTROL2_REG		0x000F
+#define NVM_INIT_CONTROL3_PORT_B	0x0014
+#define NVM_INIT_3GIO_3			0x001A
+#define NVM_SWDEF_PINS_CTRL_PORT_0	0x0020
+#define NVM_INIT_CONTROL3_PORT_A	0x0024
+#define NVM_CFG				0x0012
+#define NVM_ALT_MAC_ADDR_PTR		0x0037
+#define NVM_CHECKSUM_REG		0x003F
+#define NVM_COMPATIBILITY_REG_3		0x0003
+#define NVM_COMPATIBILITY_BIT_MASK	0x8000
+
+#define IGC_NVM_CFG_DONE_PORT_0	0x040000 /* MNG config cycle done */
+#define IGC_NVM_CFG_DONE_PORT_1	0x080000 /* ...for second port */
+#define IGC_NVM_CFG_DONE_PORT_2	0x100000 /* ...for third port */
+#define IGC_NVM_CFG_DONE_PORT_3	0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a)	(	\
+	__extension__ ({			\
+		typeof(a) _a = (a);		\
+		_a ? (0x40 + 0x40 * _a) : 0;	\
+	}))
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO		0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO		0x0004 /* MDIO accesses routed extrnl */
+/* Offset of Link Mode bits for 82575/82576 */
+#define NVM_WORD24_LNK_MODE_OFFSET	8
+/* Offset of Link Mode bits for 82580 up */
+#define NVM_WORD24_82580_LNK_MODE_OFFSET	4
+
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK		0x3000
+#define NVM_WORD0F_PAUSE		0x1000
+#define NVM_WORD0F_ASM_DIR		0x2000
+#define NVM_WORD0F_SWPDIO_EXT_MASK	0x00F0
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+#define NVM_WORD1A_ASPM_MASK		0x000C
+
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define NVM_COMPAT_LOM			0x0800
+
+/* length of string needed to store PBA number */
+#define IGC_PBANUM_LENGTH		11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM				0xBABA
+
+/* PBA (printed board assembly) number words */
+#define NVM_PBA_OFFSET_0		8
+#define NVM_PBA_OFFSET_1		9
+#define NVM_PBA_PTR_GUARD		0xFAFA
+#define NVM_RESERVED_WORD		0xFFFF
+#define NVM_PHY_CLASS_A			0x8000
+#define NVM_SERDES_AMPLITUDE_MASK	0x000F
+#define NVM_SIZE_MASK			0x1C00
+#define NVM_SIZE_SHIFT			10
+#define NVM_WORD_SIZE_BASE_SHIFT	6
+#define NVM_SWDPIO_EXT_SHIFT		4
+
+/* NVM Commands - Microwire */
+#define NVM_READ_OPCODE_MICROWIRE	0x6  /* NVM read opcode */
+#define NVM_WRITE_OPCODE_MICROWIRE	0x5  /* NVM write opcode */
+#define NVM_ERASE_OPCODE_MICROWIRE	0x7  /* NVM erase opcode */
+#define NVM_EWEN_OPCODE_MICROWIRE	0x13 /* NVM erase/write enable */
+#define NVM_EWDS_OPCODE_MICROWIRE	0x10 /* NVM erase/write disable */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI	5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI	0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI	0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI	0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI	0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI	0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI	0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000	0x0000
+#define ID_LED_RESERVED_FFFF	0xFFFF
+#define ID_LED_DEFAULT		((ID_LED_OFF1_ON2  << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2	0x1
+#define ID_LED_DEF1_ON2		0x2
+#define ID_LED_DEF1_OFF2	0x3
+#define ID_LED_ON1_DEF2		0x4
+#define ID_LED_ON1_ON2		0x5
+#define ID_LED_ON1_OFF2		0x6
+#define ID_LED_OFF1_DEF2	0x7
+#define ID_LED_OFF1_ON2		0x8
+#define ID_LED_OFF1_OFF2	0x9
+
+#define IGP_ACTIVITY_LED_MASK	0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE	0x0300
+#define IGP_LED3_MODE		0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCIX_COMMAND_REGISTER		0xE6
+#define PCIX_STATUS_REGISTER_LO		0xE8
+#define PCIX_STATUS_REGISTER_HI		0xEA
+#define PCI_HEADER_TYPE_REGISTER	0x0E
+#define PCIE_LINK_STATUS		0x12
+#define PCIE_DEVICE_CONTROL2		0x28
+
+#define PCIX_COMMAND_MMRBC_MASK		0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT	0x2
+#define PCIX_STATUS_HI_MMRBC_MASK	0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT	0x5
+#define PCIX_STATUS_HI_MMRBC_4K		0x3
+#define PCIX_STATUS_HI_MMRBC_2K		0x2
+#define PCIX_STATUS_LO_FUNC_MASK	0x7
+#define PCI_HEADER_TYPE_MULTIFUNC	0x80
+#define PCIE_LINK_WIDTH_MASK		0x3F0
+#define PCIE_LINK_WIDTH_SHIFT		4
+#define PCIE_LINK_SPEED_MASK		0x0F
+#define PCIE_LINK_SPEED_2500		0x01
+#define PCIE_LINK_SPEED_5000		0x02
+#define PCIE_DEVICE_CONTROL2_16ms	0x0005
+
+#define ETH_ADDR_LEN			6
+
+#define PHY_REVISION_MASK		0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS		0x1F  /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG		0xF
+
+/* Bit definitions for valid PHY IDs.
+ * I = Integrated
+ * E = External
+ */
+#define M88IGC_E_PHY_ID	0x01410C50
+#define M88IGC_I_PHY_ID	0x01410C30
+#define M88E1011_I_PHY_ID	0x01410C20
+#define IGP01IGC_I_PHY_ID	0x02A80380
+#define M88E1111_I_PHY_ID	0x01410CC0
+#define M88E1543_E_PHY_ID	0x01410EA0
+#define M88E1512_E_PHY_ID	0x01410DD0
+#define M88E1112_E_PHY_ID	0x01410C90
+#define I347AT4_E_PHY_ID	0x01410DC0
+#define M88E1340M_E_PHY_ID	0x01410DF0
+#define GG82563_E_PHY_ID	0x01410CA0
+#define IGP03IGC_E_PHY_ID	0x02A80390
+#define IFE_E_PHY_ID		0x02A80330
+#define IFE_PLUS_E_PHY_ID	0x02A80320
+#define IFE_C_E_PHY_ID		0x02A80310
+#define BMIGC_E_PHY_ID	0x01410CB0
+#define BMIGC_E_PHY_ID_R2	0x01410CB1
+#define I82577_E_PHY_ID		0x01540050
+#define I82578_E_PHY_ID		0x004DD040
+#define I82579_E_PHY_ID		0x01540090
+#define I217_E_PHY_ID		0x015400A0
+#define I82580_I_PHY_ID		0x015403A0
+#define I350_I_PHY_ID		0x015403B0
+#define I210_I_PHY_ID		0x01410C00
+#define IGP04IGC_E_PHY_ID	0x02A80391
+#define M88_VENDOR		0x0141
+#define I225_I_PHY_ID		0x67C9DC00
+
+/* M88E1000 Specific Registers */
+#define M88IGC_PHY_SPEC_CTRL		0x10  /* PHY Specific Control Reg */
+#define M88IGC_PHY_SPEC_STATUS	0x11  /* PHY Specific Status Reg */
+#define M88IGC_EXT_PHY_SPEC_CTRL	0x14  /* Extended PHY Specific Cntrl */
+#define M88IGC_RX_ERR_CNTR		0x15  /* Receive Error Counter */
+
+#define M88IGC_PHY_EXT_CTRL		0x1A  /* PHY extend control register */
+#define M88IGC_PHY_PAGE_SELECT	0x1D  /* Reg 29 for pg number setting */
+#define M88IGC_PHY_GEN_CONTROL	0x1E  /* meaning depends on reg 29 */
+#define M88IGC_PHY_VCO_REG_BIT8	0x100 /* Bits 8 & 11 are adjusted for */
+#define M88IGC_PHY_VCO_REG_BIT11	0x800 /* improved BER performance */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88IGC_PSCR_POLARITY_REVERSAL	0x0002 /* 1=Polarity Reverse enabled */
+/* MDI Crossover Mode bits 6:5 Manual MDI configuration */
+#define M88IGC_PSCR_MDI_MANUAL_MODE	0x0000
+#define M88IGC_PSCR_MDIX_MANUAL_MODE	0x0020  /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88IGC_PSCR_AUTO_X_1000T	0x0040
+/* Auto crossover enabled all speeds */
+#define M88IGC_PSCR_AUTO_X_MODE	0x0060
+#define M88IGC_PSCR_ASSERT_CRS_ON_TX	0x0800 /* 1=Assert CRS on Tx */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88IGC_PSSR_REV_POLARITY	0x0002 /* 1=Polarity reversed */
+#define M88IGC_PSSR_DOWNSHIFT		0x0020 /* 1=Downshifted */
+#define M88IGC_PSSR_MDIX		0x0040 /* 1=MDIX; 0=MDI */
+/* 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88IGC_PSSR_CABLE_LENGTH	0x0380
+#define M88IGC_PSSR_LINK		0x0400 /* 1=Link up, 0=Link down */
+#define M88IGC_PSSR_SPD_DPLX_RESOLVED	0x0800 /* 1=Speed & Duplex resolved */
+#define M88IGC_PSSR_DPLX		0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88IGC_PSSR_SPEED		0xC000 /* Speed, bits 14:15 */
+#define M88IGC_PSSR_100MBS		0x4000 /* 01=100Mbs */
+#define M88IGC_PSSR_1000MBS		0x8000 /* 10=1000Mbs */
+
+#define M88IGC_PSSR_CABLE_LENGTH_SHIFT	7
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88IGC_EPSCR_MASTER_DOWNSHIFT_MASK	0x0C00
+#define M88IGC_EPSCR_MASTER_DOWNSHIFT_1X	0x0000
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88IGC_EPSCR_SLAVE_DOWNSHIFT_MASK	0x0300
+#define M88IGC_EPSCR_SLAVE_DOWNSHIFT_1X	0x0100
+#define M88IGC_EPSCR_TX_CLK_25	0x0070 /* 25  MHz TX_CLK */
+
+/* Intel I347AT4 Registers */
+#define I347AT4_PCDL		0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC		0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT	0x16
+
+/* I347AT4 Extended PHY Specific Control Register */
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE	0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK	0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X	0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X	0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X	0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X	0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X	0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X	0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X	0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X	0x7000
+
+/* I347AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT	0x0400 /* 0=cm 1=meters */
+
+/* M88E1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE	0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK	0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X	0x0800
+
+#define I82578_EPSCR_DOWNSHIFT_ENABLE		0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK	0x001C
+
+/* BME1000 PHY Specific Control Register */
+#define BMIGC_PSCR_ENABLE_DOWNSHIFT	0x0800 /* 1 = enable downshift */
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT	5
+#define GG82563_REG(page, reg)	\
+	(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG	30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL		GG82563_REG(0, 16) /* PHY Spec Cntrl */
+#define GG82563_PHY_PAGE_SELECT		GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2		GG82563_REG(0, 26) /* PHY Spec Cntrl2 */
+#define GG82563_PHY_PAGE_SELECT_ALT	GG82563_REG(0, 29) /* Alt Page Select */
+
+/* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL	GG82563_REG(2, 21)
+
+#define GG82563_PHY_DSP_DISTANCE	GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+/* Kumeran Mode Control */
+#define GG82563_PHY_KMRN_MODE_CTRL	GG82563_REG(193, 16)
+#define GG82563_PHY_PWR_MGMT_CTRL	GG82563_REG(193, 20) /* Pwr Mgt Ctrl */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_INBAND_CTRL		GG82563_REG(194, 18) /* Inband Ctrl */
+
+/* MDI Control */
+#define IGC_MDIC_DATA_MASK	0x0000FFFF
+#define IGC_MDIC_INT_EN		0x20000000
+#define IGC_MDIC_REG_MASK	0x001F0000
+#define IGC_MDIC_REG_SHIFT	16
+#define IGC_MDIC_PHY_MASK	0x03E00000
+#define IGC_MDIC_PHY_SHIFT	21
+#define IGC_MDIC_OP_WRITE	0x04000000
+#define IGC_MDIC_OP_READ	0x08000000
+#define IGC_MDIC_READY	0x10000000
+#define IGC_MDIC_ERROR	0x40000000
+#define IGC_MDIC_DEST		0x80000000
+
+#define IGC_N0_QUEUE -1
+
+#define IGC_MAX_MAC_HDR_LEN	127
+#define IGC_MAX_NETWORK_HDR_LEN	511
+
+#define IGC_VLAPQF_QUEUE_SEL(_n, q_idx) ((q_idx) << ((_n) * 4))
+#define IGC_VLAPQF_P_VALID(_n)	(0x1 << (3 + (_n) * 4))
+#define IGC_VLAPQF_QUEUE_MASK	0x03
+#define IGC_VFTA_BLOCK_SIZE	8
+/* SerDes Control */
+#define IGC_GEN_CTL_READY		0x80000000
+#define IGC_GEN_CTL_ADDRESS_SHIFT	8
+#define IGC_GEN_POLL_TIMEOUT		640
+
+/* LinkSec register fields */
+#define IGC_LSECTXCAP_SUM_MASK	0x00FF0000
+#define IGC_LSECTXCAP_SUM_SHIFT	16
+#define IGC_LSECRXCAP_SUM_MASK	0x00FF0000
+#define IGC_LSECRXCAP_SUM_SHIFT	16
+
+#define IGC_LSECTXCTRL_EN_MASK	0x00000003
+#define IGC_LSECTXCTRL_DISABLE	0x0
+#define IGC_LSECTXCTRL_AUTH		0x1
+#define IGC_LSECTXCTRL_AUTH_ENCRYPT	0x2
+#define IGC_LSECTXCTRL_AISCI		0x00000020
+#define IGC_LSECTXCTRL_PNTHRSH_MASK	0xFFFFFF00
+#define IGC_LSECTXCTRL_RSV_MASK	0x000000D8
+
+#define IGC_LSECRXCTRL_EN_MASK	0x0000000C
+#define IGC_LSECRXCTRL_EN_SHIFT	2
+#define IGC_LSECRXCTRL_DISABLE	0x0
+#define IGC_LSECRXCTRL_CHECK		0x1
+#define IGC_LSECRXCTRL_STRICT		0x2
+#define IGC_LSECRXCTRL_DROP		0x3
+#define IGC_LSECRXCTRL_PLSH		0x00000040
+#define IGC_LSECRXCTRL_RP		0x00000080
+#define IGC_LSECRXCTRL_RSV_MASK	0xFFFFFF33
+
+/* Tx Rate-Scheduler Config fields */
+#define IGC_RTTBCNRC_RS_ENA		0x80000000
+#define IGC_RTTBCNRC_RF_DEC_MASK	0x00003FFF
+#define IGC_RTTBCNRC_RF_INT_SHIFT	14
+#define IGC_RTTBCNRC_RF_INT_MASK	\
+	(IGC_RTTBCNRC_RF_DEC_MASK << IGC_RTTBCNRC_RF_INT_SHIFT)
+
+/* DMA Coalescing register fields */
+/* DMA Coalescing Watchdog Timer */
+#define IGC_DMACR_DMACWT_MASK		0x00003FFF
+/* DMA Coalescing Rx Threshold */
+#define IGC_DMACR_DMACTHR_MASK	0x00FF0000
+#define IGC_DMACR_DMACTHR_SHIFT	16
+/* Lx when no PCIe transactions */
+#define IGC_DMACR_DMAC_LX_MASK	0x30000000
+#define IGC_DMACR_DMAC_LX_SHIFT	28
+#define IGC_DMACR_DMAC_EN		0x80000000 /* Enable DMA Coalescing */
+/* DMA Coalescing BMC-to-OS Watchdog Enable */
+#define IGC_DMACR_DC_BMC2OSW_EN	0x00008000
+
+/* DMA Coalescing Transmit Threshold */
+#define IGC_DMCTXTH_DMCTTHR_MASK	0x00000FFF
+
+#define IGC_DMCTLX_TTLX_MASK		0x00000FFF /* Time to LX request */
+
+/* Rx Traffic Rate Threshold */
+#define IGC_DMCRTRH_UTRESH_MASK	0x0007FFFF
+/* Rx packet rate in current window */
+#define IGC_DMCRTRH_LRPRCW		0x80000000
+
+/* DMA Coal Rx Traffic Current Count */
+#define IGC_DMCCNT_CCOUNT_MASK	0x01FFFFFF
+
+/* Flow ctrl Rx Threshold High val */
+#define IGC_FCRTC_RTH_COAL_MASK	0x0003FFF0
+#define IGC_FCRTC_RTH_COAL_SHIFT	4
+/* Lx power decision based on DMA coal */
+#define IGC_PCIEMISC_LX_DECISION	0x00000080
+
+#define IGC_RXPBS_CFG_TS_EN		0x80000000 /* Timestamp in Rx buffer */
+#define IGC_RXPBS_SIZE_I210_MASK	0x0000003F /* Rx packet buffer size */
+#define IGC_TXPB0S_SIZE_I210_MASK	0x0000003F /* Tx packet buffer 0 size */
+#define I210_RXPBSIZE_DEFAULT		0x000000A2 /* RXPBSIZE default */
+#define I210_TXPBSIZE_DEFAULT		0x04000014 /* TXPBSIZE default */
+
+
+#define I225_RXPBSIZE_DEFAULT		0x000000A2 /* RXPBSIZE default */
+#define I225_TXPBSIZE_DEFAULT		0x04000014 /* TXPBSIZE default */
+#define IGC_RXPBS_SIZE_I225_MASK	0x0000003F /* Rx packet buffer size */
+#define IGC_TXPB0S_SIZE_I225_MASK	0x0000003F /* Tx packet buffer 0 size */
+#define IGC_STM_OPCODE		0xDB00
+#define IGC_EEPROM_FLASH_SIZE_WORD	0x11
+#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
+	(u8)((invm_dword) & 0x7)
+#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
+	(u8)(((invm_dword) & 0x0000FE00) >> 9)
+#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
+	(u16)(((invm_dword) & 0xFFFF0000) >> 16)
+#define IGC_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS	8
+#define IGC_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS	1
+#define IGC_INVM_ULT_BYTES_SIZE		8
+#define IGC_INVM_RECORD_SIZE_IN_BYTES	4
+#define IGC_INVM_VER_FIELD_ONE		0x1FF8
+#define IGC_INVM_VER_FIELD_TWO		0x7FE000
+#define IGC_INVM_IMGTYPE_FIELD		0x1F800000
+
+#define IGC_INVM_MAJOR_MASK	0x3F0
+#define IGC_INVM_MINOR_MASK	0xF
+#define IGC_INVM_MAJOR_SHIFT	4
+
+/* PLL Defines */
+#define IGC_PCI_PMCSR		0x44
+#define IGC_PCI_PMCSR_D3		0x03
+#define IGC_MAX_PLL_TRIES		5
+#define IGC_PHY_PLL_UNCONF		0xFF
+#define IGC_PHY_PLL_FREQ_PAGE	0xFC0000
+#define IGC_PHY_PLL_FREQ_REG		0x000E
+#define IGC_INVM_DEFAULT_AL		0x202F
+#define IGC_INVM_AUTOLOAD		0x0A
+#define IGC_INVM_PLL_WO_VAL		0x0010
+
+/* Proxy Filter Control Extended */
+#define IGC_PROXYFCEX_MDNS		0x00000001 /* mDNS */
+#define IGC_PROXYFCEX_MDNS_M		0x00000002 /* mDNS Multicast */
+#define IGC_PROXYFCEX_MDNS_U		0x00000004 /* mDNS Unicast */
+#define IGC_PROXYFCEX_IPV4_M		0x00000008 /* IPv4 Multicast */
+#define IGC_PROXYFCEX_IPV6_M		0x00000010 /* IPv6 Multicast */
+#define IGC_PROXYFCEX_IGMP		0x00000020 /* IGMP */
+#define IGC_PROXYFCEX_IGMP_M		0x00000040 /* IGMP Multicast */
+#define IGC_PROXYFCEX_ARPRES		0x00000080 /* ARP Response */
+#define IGC_PROXYFCEX_ARPRES_D	0x00000100 /* ARP Response Directed */
+#define IGC_PROXYFCEX_ICMPV4		0x00000200 /* ICMPv4 */
+#define IGC_PROXYFCEX_ICMPV4_D	0x00000400 /* ICMPv4 Directed */
+#define IGC_PROXYFCEX_ICMPV6		0x00000800 /* ICMPv6 */
+#define IGC_PROXYFCEX_ICMPV6_D	0x00001000 /* ICMPv6 Directed */
+#define IGC_PROXYFCEX_DNS		0x00002000 /* DNS */
+
+/* Proxy Filter Control */
+#define IGC_PROXYFC_D0		0x00000001 /* Enable offload in D0 */
+#define IGC_PROXYFC_EX		0x00000004 /* Directed exact proxy */
+#define IGC_PROXYFC_MC		0x00000008 /* Directed MC Proxy */
+#define IGC_PROXYFC_BC		0x00000010 /* Broadcast Proxy Enable */
+#define IGC_PROXYFC_ARP_DIRECTED	0x00000020 /* Directed ARP Proxy Ena */
+#define IGC_PROXYFC_IPV4		0x00000040 /* Directed IPv4 Enable */
+#define IGC_PROXYFC_IPV6		0x00000080 /* Directed IPv6 Enable */
+#define IGC_PROXYFC_NS		0x00000200 /* IPv6 Neighbor Solicitation */
+#define IGC_PROXYFC_NS_DIRECTED	0x00000400 /* Directed NS Proxy Ena */
+#define IGC_PROXYFC_ARP		0x00000800 /* ARP Request Proxy Ena */
+/* Proxy Status */
+#define IGC_PROXYS_CLEAR		0xFFFFFFFF /* Clear */
+
+/* Firmware Status */
+#define IGC_FWSTS_FWRI		0x80000000 /* FW Reset Indication */
+/* VF Control */
+#define IGC_VTCTRL_RST		0x04000000 /* Reset VF */
+
+#define IGC_STATUS_LAN_ID_MASK	0x00000000C /* Mask for Lan ID field */
+/* Lan ID bit field offset in status register */
+#define IGC_STATUS_LAN_ID_OFFSET	2
+#define IGC_VFTA_ENTRIES		128
+
+#define IGC_UNUSEDARG
+#define ERROR_REPORT(fmt)	do { } while (0)
+#endif /* _IGC_DEFINES_H_ */
diff --git a/drivers/net/igc/base/igc_hw.h b/drivers/net/igc/base/igc_hw.h
new file mode 100644
index 0000000..89c57b2
--- /dev/null
+++ b/drivers/net/igc/base/igc_hw.h
@@ -0,0 +1,1051 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_HW_H_
+#define _IGC_HW_H_
+
+#include "igc_osdep.h"
+#include "igc_regs.h"
+#include "igc_defines.h"
+
+struct igc_hw;
+
+#define IGC_DEV_ID_82542			0x1000
+#define IGC_DEV_ID_82543GC_FIBER		0x1001
+#define IGC_DEV_ID_82543GC_COPPER		0x1004
+#define IGC_DEV_ID_82544EI_COPPER		0x1008
+#define IGC_DEV_ID_82544EI_FIBER		0x1009
+#define IGC_DEV_ID_82544GC_COPPER		0x100C
+#define IGC_DEV_ID_82544GC_LOM		0x100D
+#define IGC_DEV_ID_82540EM			0x100E
+#define IGC_DEV_ID_82540EM_LOM		0x1015
+#define IGC_DEV_ID_82540EP_LOM		0x1016
+#define IGC_DEV_ID_82540EP			0x1017
+#define IGC_DEV_ID_82540EP_LP			0x101E
+#define IGC_DEV_ID_82545EM_COPPER		0x100F
+#define IGC_DEV_ID_82545EM_FIBER		0x1011
+#define IGC_DEV_ID_82545GM_COPPER		0x1026
+#define IGC_DEV_ID_82545GM_FIBER		0x1027
+#define IGC_DEV_ID_82545GM_SERDES		0x1028
+#define IGC_DEV_ID_82546EB_COPPER		0x1010
+#define IGC_DEV_ID_82546EB_FIBER		0x1012
+#define IGC_DEV_ID_82546EB_QUAD_COPPER	0x101D
+#define IGC_DEV_ID_82546GB_COPPER		0x1079
+#define IGC_DEV_ID_82546GB_FIBER		0x107A
+#define IGC_DEV_ID_82546GB_SERDES		0x107B
+#define IGC_DEV_ID_82546GB_PCIE		0x108A
+#define IGC_DEV_ID_82546GB_QUAD_COPPER	0x1099
+#define IGC_DEV_ID_82546GB_QUAD_COPPER_KSP3	0x10B5
+#define IGC_DEV_ID_82541EI			0x1013
+#define IGC_DEV_ID_82541EI_MOBILE		0x1018
+#define IGC_DEV_ID_82541ER_LOM		0x1014
+#define IGC_DEV_ID_82541ER			0x1078
+#define IGC_DEV_ID_82541GI			0x1076
+#define IGC_DEV_ID_82541GI_LF			0x107C
+#define IGC_DEV_ID_82541GI_MOBILE		0x1077
+#define IGC_DEV_ID_82547EI			0x1019
+#define IGC_DEV_ID_82547EI_MOBILE		0x101A
+#define IGC_DEV_ID_82547GI			0x1075
+#define IGC_DEV_ID_82571EB_COPPER		0x105E
+#define IGC_DEV_ID_82571EB_FIBER		0x105F
+#define IGC_DEV_ID_82571EB_SERDES		0x1060
+#define IGC_DEV_ID_82571EB_SERDES_DUAL	0x10D9
+#define IGC_DEV_ID_82571EB_SERDES_QUAD	0x10DA
+#define IGC_DEV_ID_82571EB_QUAD_COPPER	0x10A4
+#define IGC_DEV_ID_82571PT_QUAD_COPPER	0x10D5
+#define IGC_DEV_ID_82571EB_QUAD_FIBER		0x10A5
+#define IGC_DEV_ID_82571EB_QUAD_COPPER_LP	0x10BC
+#define IGC_DEV_ID_82572EI_COPPER		0x107D
+#define IGC_DEV_ID_82572EI_FIBER		0x107E
+#define IGC_DEV_ID_82572EI_SERDES		0x107F
+#define IGC_DEV_ID_82572EI			0x10B9
+#define IGC_DEV_ID_82573E			0x108B
+#define IGC_DEV_ID_82573E_IAMT		0x108C
+#define IGC_DEV_ID_82573L			0x109A
+#define IGC_DEV_ID_82574L			0x10D3
+#define IGC_DEV_ID_82574LA			0x10F6
+#define IGC_DEV_ID_82583V			0x150C
+#define IGC_DEV_ID_80003ES2LAN_COPPER_DPT	0x1096
+#define IGC_DEV_ID_80003ES2LAN_SERDES_DPT	0x1098
+#define IGC_DEV_ID_80003ES2LAN_COPPER_SPT	0x10BA
+#define IGC_DEV_ID_80003ES2LAN_SERDES_SPT	0x10BB
+#define IGC_DEV_ID_ICH8_82567V_3		0x1501
+#define IGC_DEV_ID_ICH8_IGP_M_AMT		0x1049
+#define IGC_DEV_ID_ICH8_IGP_AMT		0x104A
+#define IGC_DEV_ID_ICH8_IGP_C			0x104B
+#define IGC_DEV_ID_ICH8_IFE			0x104C
+#define IGC_DEV_ID_ICH8_IFE_GT		0x10C4
+#define IGC_DEV_ID_ICH8_IFE_G			0x10C5
+#define IGC_DEV_ID_ICH8_IGP_M			0x104D
+#define IGC_DEV_ID_ICH9_IGP_M			0x10BF
+#define IGC_DEV_ID_ICH9_IGP_M_AMT		0x10F5
+#define IGC_DEV_ID_ICH9_IGP_M_V		0x10CB
+#define IGC_DEV_ID_ICH9_IGP_AMT		0x10BD
+#define IGC_DEV_ID_ICH9_BM			0x10E5
+#define IGC_DEV_ID_ICH9_IGP_C			0x294C
+#define IGC_DEV_ID_ICH9_IFE			0x10C0
+#define IGC_DEV_ID_ICH9_IFE_GT		0x10C3
+#define IGC_DEV_ID_ICH9_IFE_G			0x10C2
+#define IGC_DEV_ID_ICH10_R_BM_LM		0x10CC
+#define IGC_DEV_ID_ICH10_R_BM_LF		0x10CD
+#define IGC_DEV_ID_ICH10_R_BM_V		0x10CE
+#define IGC_DEV_ID_ICH10_D_BM_LM		0x10DE
+#define IGC_DEV_ID_ICH10_D_BM_LF		0x10DF
+#define IGC_DEV_ID_ICH10_D_BM_V		0x1525
+#define IGC_DEV_ID_PCH_M_HV_LM		0x10EA
+#define IGC_DEV_ID_PCH_M_HV_LC		0x10EB
+#define IGC_DEV_ID_PCH_D_HV_DM		0x10EF
+#define IGC_DEV_ID_PCH_D_HV_DC		0x10F0
+#define IGC_DEV_ID_PCH2_LV_LM			0x1502
+#define IGC_DEV_ID_PCH2_LV_V			0x1503
+#define IGC_DEV_ID_PCH_LPT_I217_LM		0x153A
+#define IGC_DEV_ID_PCH_LPT_I217_V		0x153B
+#define IGC_DEV_ID_PCH_LPTLP_I218_LM		0x155A
+#define IGC_DEV_ID_PCH_LPTLP_I218_V		0x1559
+#define IGC_DEV_ID_PCH_I218_LM2		0x15A0
+#define IGC_DEV_ID_PCH_I218_V2		0x15A1
+#define IGC_DEV_ID_PCH_I218_LM3		0x15A2 /* Wildcat Point PCH */
+#define IGC_DEV_ID_PCH_I218_V3		0x15A3 /* Wildcat Point PCH */
+#define IGC_DEV_ID_PCH_SPT_I219_LM		0x156F /* Sunrise Point PCH */
+#define IGC_DEV_ID_PCH_SPT_I219_V		0x1570 /* Sunrise Point PCH */
+#define IGC_DEV_ID_PCH_SPT_I219_LM2		0x15B7 /* Sunrise Point-H PCH */
+#define IGC_DEV_ID_PCH_SPT_I219_V2		0x15B8 /* Sunrise Point-H PCH */
+#define IGC_DEV_ID_PCH_LBG_I219_LM3		0x15B9 /* LEWISBURG PCH */
+#define IGC_DEV_ID_PCH_SPT_I219_LM4		0x15D7
+#define IGC_DEV_ID_PCH_SPT_I219_V4		0x15D8
+#define IGC_DEV_ID_PCH_SPT_I219_LM5		0x15E3
+#define IGC_DEV_ID_PCH_SPT_I219_V5		0x15D6
+#define IGC_DEV_ID_PCH_CNP_I219_LM6		0x15BD
+#define IGC_DEV_ID_PCH_CNP_I219_V6		0x15BE
+#define IGC_DEV_ID_PCH_CNP_I219_LM7		0x15BB
+#define IGC_DEV_ID_PCH_CNP_I219_V7		0x15BC
+#define IGC_DEV_ID_PCH_ICP_I219_LM8		0x15DF
+#define IGC_DEV_ID_PCH_ICP_I219_V8		0x15E0
+#define IGC_DEV_ID_PCH_ICP_I219_LM9		0x15E1
+#define IGC_DEV_ID_PCH_ICP_I219_V9		0x15E2
+#define IGC_DEV_ID_82576			0x10C9
+#define IGC_DEV_ID_82576_FIBER		0x10E6
+#define IGC_DEV_ID_82576_SERDES		0x10E7
+#define IGC_DEV_ID_82576_QUAD_COPPER		0x10E8
+#define IGC_DEV_ID_82576_QUAD_COPPER_ET2	0x1526
+#define IGC_DEV_ID_82576_NS			0x150A
+#define IGC_DEV_ID_82576_NS_SERDES		0x1518
+#define IGC_DEV_ID_82576_SERDES_QUAD		0x150D
+#define IGC_DEV_ID_82576_VF			0x10CA
+#define IGC_DEV_ID_82576_VF_HV		0x152D
+#define IGC_DEV_ID_I350_VF			0x1520
+#define IGC_DEV_ID_I350_VF_HV			0x152F
+#define IGC_DEV_ID_82575EB_COPPER		0x10A7
+#define IGC_DEV_ID_82575EB_FIBER_SERDES	0x10A9
+#define IGC_DEV_ID_82575GB_QUAD_COPPER	0x10D6
+#define IGC_DEV_ID_82580_COPPER		0x150E
+#define IGC_DEV_ID_82580_FIBER		0x150F
+#define IGC_DEV_ID_82580_SERDES		0x1510
+#define IGC_DEV_ID_82580_SGMII		0x1511
+#define IGC_DEV_ID_82580_COPPER_DUAL		0x1516
+#define IGC_DEV_ID_82580_QUAD_FIBER		0x1527
+#define IGC_DEV_ID_I350_COPPER		0x1521
+#define IGC_DEV_ID_I350_FIBER			0x1522
+#define IGC_DEV_ID_I350_SERDES		0x1523
+#define IGC_DEV_ID_I350_SGMII			0x1524
+#define IGC_DEV_ID_I350_DA4			0x1546
+#define IGC_DEV_ID_I210_COPPER		0x1533
+#define IGC_DEV_ID_I210_COPPER_OEM1		0x1534
+#define IGC_DEV_ID_I210_COPPER_IT		0x1535
+#define IGC_DEV_ID_I210_FIBER			0x1536
+#define IGC_DEV_ID_I210_SERDES		0x1537
+#define IGC_DEV_ID_I210_SGMII			0x1538
+#define IGC_DEV_ID_I210_COPPER_FLASHLESS	0x157B
+#define IGC_DEV_ID_I210_SERDES_FLASHLESS	0x157C
+#define IGC_DEV_ID_I210_SGMII_FLASHLESS	0x15F6
+#define IGC_DEV_ID_I211_COPPER		0x1539
+#define IGC_DEV_ID_I225_LM			0x15F2
+#define IGC_DEV_ID_I225_V			0x15F3
+#define IGC_DEV_ID_I225_K			0x3100
+#define IGC_DEV_ID_I225_I			0x15F8
+#define IGC_DEV_ID_I220_V			0x15F7
+#define IGC_DEV_ID_I225_BLANK_NVM		0x15FD
+#define IGC_DEV_ID_I354_BACKPLANE_1GBPS	0x1F40
+#define IGC_DEV_ID_I354_SGMII			0x1F41
+#define IGC_DEV_ID_I354_BACKPLANE_2_5GBPS	0x1F45
+#define IGC_DEV_ID_DH89XXCC_SGMII		0x0438
+#define IGC_DEV_ID_DH89XXCC_SERDES		0x043A
+#define IGC_DEV_ID_DH89XXCC_BACKPLANE		0x043C
+#define IGC_DEV_ID_DH89XXCC_SFP		0x0440
+
+#define IGC_REVISION_0	0
+#define IGC_REVISION_1	1
+#define IGC_REVISION_2	2
+#define IGC_REVISION_3	3
+#define IGC_REVISION_4	4
+
+#define IGC_FUNC_0		0
+#define IGC_FUNC_1		1
+#define IGC_FUNC_2		2
+#define IGC_FUNC_3		3
+
+#define IGC_ALT_MAC_ADDRESS_OFFSET_LAN0	0
+#define IGC_ALT_MAC_ADDRESS_OFFSET_LAN1	3
+#define IGC_ALT_MAC_ADDRESS_OFFSET_LAN2	6
+#define IGC_ALT_MAC_ADDRESS_OFFSET_LAN3	9
+
+enum igc_mac_type {
+	igc_undefined = 0,
+	igc_82542,
+	igc_82543,
+	igc_82544,
+	igc_82540,
+	igc_82545,
+	igc_82545_rev_3,
+	igc_82546,
+	igc_82546_rev_3,
+	igc_82541,
+	igc_82541_rev_2,
+	igc_82547,
+	igc_82547_rev_2,
+	igc_82571,
+	igc_82572,
+	igc_82573,
+	igc_82574,
+	igc_82583,
+	igc_80003es2lan,
+	igc_ich8lan,
+	igc_ich9lan,
+	igc_ich10lan,
+	igc_pchlan,
+	igc_pch2lan,
+	igc_pch_lpt,
+	igc_pch_spt,
+	igc_pch_cnp,
+	igc_82575,
+	igc_82576,
+	igc_82580,
+	igc_i350,
+	igc_i354,
+	igc_i210,
+	igc_i211,
+	igc_i225,
+	igc_vfadapt,
+	igc_vfadapt_i350,
+	igc_num_macs  /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum igc_media_type {
+	igc_media_type_unknown = 0,
+	igc_media_type_copper = 1,
+	igc_media_type_fiber = 2,
+	igc_media_type_internal_serdes = 3,
+	igc_num_media_types
+};
+
+enum igc_nvm_type {
+	igc_nvm_unknown = 0,
+	igc_nvm_none,
+	igc_nvm_eeprom_spi,
+	igc_nvm_eeprom_microwire,
+	igc_nvm_flash_hw,
+	igc_nvm_invm,
+	igc_nvm_flash_sw
+};
+
+enum igc_nvm_override {
+	igc_nvm_override_none = 0,
+	igc_nvm_override_spi_small,
+	igc_nvm_override_spi_large,
+	igc_nvm_override_microwire_small,
+	igc_nvm_override_microwire_large
+};
+
+enum igc_phy_type {
+	igc_phy_unknown = 0,
+	igc_phy_none,
+	igc_phy_m88,
+	igc_phy_igp,
+	igc_phy_igp_2,
+	igc_phy_gg82563,
+	igc_phy_igp_3,
+	igc_phy_ife,
+	igc_phy_bm,
+	igc_phy_82578,
+	igc_phy_82577,
+	igc_phy_82579,
+	igc_phy_i217,
+	igc_phy_82580,
+	igc_phy_vf,
+	igc_phy_i210,
+	igc_phy_i225,
+};
+
+enum igc_bus_type {
+	igc_bus_type_unknown = 0,
+	igc_bus_type_pci,
+	igc_bus_type_pcix,
+	igc_bus_type_pci_express,
+	igc_bus_type_reserved
+};
+
+enum igc_bus_speed {
+	igc_bus_speed_unknown = 0,
+	igc_bus_speed_33,
+	igc_bus_speed_66,
+	igc_bus_speed_100,
+	igc_bus_speed_120,
+	igc_bus_speed_133,
+	igc_bus_speed_2500,
+	igc_bus_speed_5000,
+	igc_bus_speed_reserved
+};
+
+enum igc_bus_width {
+	igc_bus_width_unknown = 0,
+	igc_bus_width_pcie_x1,
+	igc_bus_width_pcie_x2,
+	igc_bus_width_pcie_x4 = 4,
+	igc_bus_width_pcie_x8 = 8,
+	igc_bus_width_32,
+	igc_bus_width_64,
+	igc_bus_width_reserved
+};
+
+enum igc_1000t_rx_status {
+	igc_1000t_rx_status_not_ok = 0,
+	igc_1000t_rx_status_ok,
+	igc_1000t_rx_status_undefined = 0xFF
+};
+
+enum igc_rev_polarity {
+	igc_rev_polarity_normal = 0,
+	igc_rev_polarity_reversed,
+	igc_rev_polarity_undefined = 0xFF
+};
+
+enum igc_fc_mode {
+	igc_fc_none = 0,
+	igc_fc_rx_pause,
+	igc_fc_tx_pause,
+	igc_fc_full,
+	igc_fc_default = 0xFF
+};
+
+enum igc_ffe_config {
+	igc_ffe_config_enabled = 0,
+	igc_ffe_config_active,
+	igc_ffe_config_blocked
+};
+
+enum igc_dsp_config {
+	igc_dsp_config_disabled = 0,
+	igc_dsp_config_enabled,
+	igc_dsp_config_activated,
+	igc_dsp_config_undefined = 0xFF
+};
+
+enum igc_ms_type {
+	igc_ms_hw_default = 0,
+	igc_ms_force_master,
+	igc_ms_force_slave,
+	igc_ms_auto
+};
+
+enum igc_smart_speed {
+	igc_smart_speed_default = 0,
+	igc_smart_speed_on,
+	igc_smart_speed_off
+};
+
+enum igc_serdes_link_state {
+	igc_serdes_link_down = 0,
+	igc_serdes_link_autoneg_progress,
+	igc_serdes_link_autoneg_complete,
+	igc_serdes_link_forced_up
+};
+
+enum igc_invm_structure_type {
+	igc_invm_uninitialized_structure		= 0x00,
+	igc_invm_word_autoload_structure		= 0x01,
+	igc_invm_csr_autoload_structure		= 0x02,
+	igc_invm_phy_register_autoload_structure	= 0x03,
+	igc_invm_rsa_key_sha256_structure		= 0x04,
+	igc_invm_invalidated_structure		= 0x0f,
+};
+
+#define __le16 u16
+#define __le32 u32
+#define __le64 u64
+/* Receive Descriptor */
+struct igc_rx_desc {
+	__le64 buffer_addr; /* Address of the descriptor's data buffer */
+	__le16 length;      /* Length of data DMAed into data buffer */
+	__le16 csum; /* Packet checksum */
+	u8  status;  /* Descriptor status */
+	u8  errors;  /* Descriptor Errors */
+	__le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union igc_rx_desc_extended {
+	struct {
+		__le64 buffer_addr;
+		__le64 reserved;
+	} read;
+	struct {
+		struct {
+			__le32 mrq; /* Multiple Rx Queues */
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id;  /* IP id */
+					__le16 csum;   /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;  /* ext status/error */
+			__le16 length;
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS	(MAX_PS_BUFFERS - 1)
+
+/* Receive Descriptor - Packet Split */
+union igc_rx_desc_packet_split {
+	struct {
+		/* one buffer for protocol header(s), three data buffers */
+		__le64 buffer_addr[MAX_PS_BUFFERS];
+	} read;
+	struct {
+		struct {
+			__le32 mrq;  /* Multiple Rx Queues */
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;  /* ext status/error */
+			__le16 length0;  /* length of buffer 0 */
+			__le16 vlan;  /* VLAN tag */
+		} middle;
+		struct {
+			__le16 header_status;
+			/* length of buffers 1-3 */
+			__le16 length[PS_PAGE_BUFFERS];
+		} upper;
+		__le64 reserved;
+	} wb; /* writeback */
+};
+
+/* Transmit Descriptor */
+struct igc_tx_desc {
+	__le64 buffer_addr;   /* Address of the descriptor's data buffer */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;  /* Data buffer length */
+			u8 cso;  /* Checksum offset */
+			u8 cmd;  /* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status; /* Descriptor status */
+			u8 css;  /* Checksum start */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Offload Context Descriptor */
+struct igc_context_desc {
+	union {
+		__le32 ip_config;
+		struct {
+			u8 ipcss;  /* IP checksum start */
+			u8 ipcso;  /* IP checksum offset */
+			__le16 ipcse;  /* IP checksum end */
+		} ip_fields;
+	} lower_setup;
+	union {
+		__le32 tcp_config;
+		struct {
+			u8 tucss;  /* TCP checksum start */
+			u8 tucso;  /* TCP checksum offset */
+			__le16 tucse;  /* TCP checksum end */
+		} tcp_fields;
+	} upper_setup;
+	__le32 cmd_and_length;
+	union {
+		__le32 data;
+		struct {
+			u8 status;  /* Descriptor status */
+			u8 hdr_len;  /* Header length */
+			__le16 mss;  /* Maximum segment size */
+		} fields;
+	} tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct igc_data_desc {
+	__le64 buffer_addr;  /* Address of the descriptor's buffer address */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;  /* Data buffer length */
+			u8 typ_len_ext;
+			u8 cmd;
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;  /* Descriptor status */
+			u8 popts;  /* Packet Options */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Statistics counters collected by the MAC */
+struct igc_hw_stats {
+	u64 crcerrs;
+	u64 algnerrc;
+	u64 symerrs;
+	u64 rxerrc;
+	u64 mpc;
+	u64 scc;
+	u64 ecol;
+	u64 mcc;
+	u64 latecol;
+	u64 colc;
+	u64 dc;
+	u64 tncrs;
+	u64 sec;
+	u64 cexterr;
+	u64 rlec;
+	u64 xonrxc;
+	u64 xontxc;
+	u64 xoffrxc;
+	u64 xofftxc;
+	u64 fcruc;
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc;
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mgprc;
+	u64 mgpdc;
+	u64 mgptc;
+	u64 tor;
+	u64 tot;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 tsctc;
+	u64 tsctfc;
+	u64 iac;
+	u64 icrxptc;
+	u64 icrxatc;
+	u64 ictxptc;
+	u64 ictxatc;
+	u64 ictxqec;
+	u64 ictxqmtc;
+	u64 icrxdmtc;
+	u64 icrxoc;
+	u64 cbtmpc;
+	u64 htdpmc;
+	u64 cbrdpc;
+	u64 cbrmpc;
+	u64 rpthc;
+	u64 hgptc;
+	u64 htcbdpc;
+	u64 hgorc;
+	u64 hgotc;
+	u64 lenerrs;
+	u64 scvpc;
+	u64 hrmpc;
+	u64 doosync;
+	u64 o2bgptc;
+	u64 o2bspc;
+	u64 b2ospc;
+	u64 b2ogprc;
+};
+
+struct igc_vf_stats {
+	u64 base_gprc;
+	u64 base_gptc;
+	u64 base_gorc;
+	u64 base_gotc;
+	u64 base_mprc;
+	u64 base_gotlbc;
+	u64 base_gptlbc;
+	u64 base_gorlbc;
+	u64 base_gprlbc;
+
+	u32 last_gprc;
+	u32 last_gptc;
+	u32 last_gorc;
+	u32 last_gotc;
+	u32 last_mprc;
+	u32 last_gotlbc;
+	u32 last_gptlbc;
+	u32 last_gorlbc;
+	u32 last_gprlbc;
+
+	u64 gprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 mprc;
+	u64 gotlbc;
+	u64 gptlbc;
+	u64 gorlbc;
+	u64 gprlbc;
+};
+
+struct igc_phy_stats {
+	u32 idle_errors;
+	u32 receive_errors;
+};
+
+struct igc_host_mng_dhcp_cookie {
+	u32 signature;
+	u8  status;
+	u8  reserved0;
+	u16 vlan_id;
+	u32 reserved1;
+	u16 reserved2;
+	u8  reserved3;
+	u8  checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct igc_host_command_header {
+	u8 command_id;
+	u8 command_length;
+	u8 command_options;
+	u8 checksum;
+};
+
+#define IGC_HI_MAX_DATA_LENGTH	252
+struct igc_host_command_info {
+	struct igc_host_command_header command_header;
+	u8 command_data[IGC_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct igc_host_mng_command_header {
+	u8  command_id;
+	u8  checksum;
+	u16 reserved1;
+	u16 reserved2;
+	u16 command_length;
+};
+
+#define IGC_HI_MAX_MNG_DATA_LENGTH	0x6F8
+struct igc_host_mng_command_info {
+	struct igc_host_mng_command_header command_header;
+	u8 command_data[IGC_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "igc_mac.h"
+#include "igc_phy.h"
+#include "igc_nvm.h"
+#include "igc_manage.h"
+
+/* Function pointers for the MAC. */
+struct igc_mac_operations {
+	s32  (*init_params)(struct igc_hw *hw);
+	s32  (*id_led_init)(struct igc_hw *hw);
+	s32  (*blink_led)(struct igc_hw *hw);
+	bool (*check_mng_mode)(struct igc_hw *hw);
+	s32  (*check_for_link)(struct igc_hw *hw);
+	s32  (*cleanup_led)(struct igc_hw *hw);
+	void (*clear_hw_cntrs)(struct igc_hw *hw);
+	void (*clear_vfta)(struct igc_hw *hw);
+	s32  (*get_bus_info)(struct igc_hw *hw);
+	void (*set_lan_id)(struct igc_hw *hw);
+	s32  (*get_link_up_info)(struct igc_hw *hw, u16 *speed, u16 *duplex);
+	s32  (*led_on)(struct igc_hw *hw);
+	s32  (*led_off)(struct igc_hw *hw);
+	void (*update_mc_addr_list)(struct igc_hw *hw,
+			u8 *mc_addr_list, u32 count);
+	s32  (*reset_hw)(struct igc_hw *hw);
+	s32  (*init_hw)(struct igc_hw *hw);
+	void (*shutdown_serdes)(struct igc_hw *hw);
+	void (*power_up_serdes)(struct igc_hw *hw);
+	s32  (*setup_link)(struct igc_hw *hw);
+	s32  (*setup_physical_interface)(struct igc_hw *hw);
+	s32  (*setup_led)(struct igc_hw *hw);
+	void (*write_vfta)(struct igc_hw *hw, u32 offset, u32 value);
+	void (*config_collision_dist)(struct igc_hw *hw);
+	int  (*rar_set)(struct igc_hw *hw, u8 *addr, u32 index);
+	s32  (*read_mac_addr)(struct igc_hw *hw);
+	s32  (*validate_mdi_setting)(struct igc_hw *hw);
+	s32  (*acquire_swfw_sync)(struct igc_hw *hw, u16 mask);
+	void (*release_swfw_sync)(struct igc_hw *hw, u16 mask);
+};
+
+/* When to use various PHY register access functions:
+ *
+ *                 Func   Caller
+ *   Function      Does   Does    When to use
+ *   ~~~~~~~~~~~~  ~~~~~  ~~~~~~  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *   X_reg         L,P,A  n/a     for simple PHY reg accesses
+ *   X_reg_locked  P,A    L       for multiple accesses of different regs
+ *                                on different pages
+ *   X_reg_page    A      L,P     for multiple accesses of different regs
+ *                                on the same page
+ *
+ * Where X=[read|write], L=locking, P=sets page, A=register access
+ *
+ */
+struct igc_phy_operations {
+	s32  (*init_params)(struct igc_hw *hw);
+	s32  (*acquire)(struct igc_hw *hw);
+	s32  (*cfg_on_link_up)(struct igc_hw *hw);
+	s32  (*check_polarity)(struct igc_hw *hw);
+	s32  (*check_reset_block)(struct igc_hw *hw);
+	s32  (*commit)(struct igc_hw *hw);
+	s32  (*force_speed_duplex)(struct igc_hw *hw);
+	s32  (*get_cfg_done)(struct igc_hw *hw);
+	s32  (*get_cable_length)(struct igc_hw *hw);
+	s32  (*get_info)(struct igc_hw *hw);
+	s32  (*set_page)(struct igc_hw *hw, u16 page);
+	s32  (*read_reg)(struct igc_hw *hw, u32 offset, u16 *data);
+	s32  (*read_reg_locked)(struct igc_hw *hw, u32 offset, u16 *data);
+	s32  (*read_reg_page)(struct igc_hw *hw, u32 offset, u16 *data);
+	void (*release)(struct igc_hw *hw);
+	s32  (*reset)(struct igc_hw *hw);
+	s32  (*set_d0_lplu_state)(struct igc_hw *hw, bool active);
+	s32  (*set_d3_lplu_state)(struct igc_hw *hw, bool active);
+	s32  (*write_reg)(struct igc_hw *hw, u32 offset, u16 data);
+	s32  (*write_reg_locked)(struct igc_hw *hw, u32 offset, u16 data);
+	s32  (*write_reg_page)(struct igc_hw *hw, u32 offset, u16 data);
+	void (*power_up)(struct igc_hw *hw);
+	void (*power_down)(struct igc_hw *hw);
+	s32 (*read_i2c_byte)(struct igc_hw *hw, u8 byte_offset,
+			u8 dev_addr, u8 *data);
+	s32 (*write_i2c_byte)(struct igc_hw *hw, u8 byte_offset,
+			u8 dev_addr, u8 data);
+};
+
+/* Function pointers for the NVM. */
+struct igc_nvm_operations {
+	s32  (*init_params)(struct igc_hw *hw);
+	s32  (*acquire)(struct igc_hw *hw);
+	s32  (*read)(struct igc_hw *hw, u16 offset, u16 words, u16 *data);
+	void (*release)(struct igc_hw *hw);
+	void (*reload)(struct igc_hw *hw);
+	s32  (*update)(struct igc_hw *hw);
+	s32  (*valid_led_default)(struct igc_hw *hw, u16 *data);
+	s32  (*validate)(struct igc_hw *hw);
+	s32  (*write)(struct igc_hw *hw, u16 offset, u16 words, u16 *data);
+};
+
+struct igc_info {
+	s32 (*get_invariants)(struct igc_hw *hw);
+	struct igc_mac_operations *mac_ops;
+	const struct igc_phy_operations *phy_ops;
+	struct igc_nvm_operations *nvm_ops;
+};
+
+extern const struct igc_info igc_i225_info;
+
+struct igc_mac_info {
+	struct igc_mac_operations ops;
+	u8 addr[ETH_ADDR_LEN];
+	u8 perm_addr[ETH_ADDR_LEN];
+
+	enum igc_mac_type type;
+
+	u32 collision_delta;
+	u32 ledctl_default;
+	u32 ledctl_mode1;
+	u32 ledctl_mode2;
+	u32 mc_filter_type;
+	u32 tx_packet_delta;
+	u32 txcw;
+
+	u16 current_ifs_val;
+	u16 ifs_max_val;
+	u16 ifs_min_val;
+	u16 ifs_ratio;
+	u16 ifs_step_size;
+	u16 mta_reg_count;
+	u16 uta_reg_count;
+
+	/* Maximum size of the MTA register table in all supported adapters */
+#define MAX_MTA_REG 128
+	u32 mta_shadow[MAX_MTA_REG];
+	u16 rar_entry_count;
+
+	u8  forced_speed_duplex;
+
+	bool adaptive_ifs;
+	bool has_fwsm;
+	bool arc_subsystem_valid;
+	bool asf_firmware_present;
+	bool autoneg;
+	bool autoneg_failed;
+	bool get_link_status;
+	bool in_ifs_mode;
+	bool report_tx_early;
+	enum igc_serdes_link_state serdes_link_state;
+	bool serdes_has_link;
+	bool tx_pkt_filtering;
+};
+
+struct igc_phy_info {
+	struct igc_phy_operations ops;
+	enum igc_phy_type type;
+
+	enum igc_1000t_rx_status local_rx;
+	enum igc_1000t_rx_status remote_rx;
+	enum igc_ms_type ms_type;
+	enum igc_ms_type original_ms_type;
+	enum igc_rev_polarity cable_polarity;
+	enum igc_smart_speed smart_speed;
+
+	u32 addr;
+	u32 id;
+	u32 reset_delay_us; /* in usec */
+	u32 revision;
+
+	enum igc_media_type media_type;
+
+	u16 autoneg_advertised;
+	u16 autoneg_mask;
+	u16 cable_length;
+	u16 max_cable_length;
+	u16 min_cable_length;
+
+	u8 mdix;
+
+	bool disable_polarity_correction;
+	bool is_mdix;
+	bool polarity_correction;
+	bool speed_downgraded;
+	bool autoneg_wait_to_complete;
+};
+
+struct igc_nvm_info {
+	struct igc_nvm_operations ops;
+	enum igc_nvm_type type;
+	enum igc_nvm_override override;
+
+	u32 flash_bank_size;
+	u32 flash_base_addr;
+
+	u16 word_size;
+	u16 delay_usec;
+	u16 address_bits;
+	u16 opcode_bits;
+	u16 page_size;
+};
+
+struct igc_bus_info {
+	enum igc_bus_type type;
+	enum igc_bus_speed speed;
+	enum igc_bus_width width;
+
+	u16 func;
+	u16 pci_cmd_word;
+};
+
+struct igc_fc_info {
+	u32 high_water;  /* Flow control high-water mark */
+	u32 low_water;  /* Flow control low-water mark */
+	u16 pause_time;  /* Flow control pause timer */
+	u16 refresh_time;  /* Flow control refresh timer */
+	bool send_xon;  /* Flow control send XON */
+	bool strict_ieee;  /* Strict IEEE mode */
+	enum igc_fc_mode current_mode;  /* FC mode in effect */
+	enum igc_fc_mode requested_mode;  /* FC mode requested by caller */
+};
+
+struct igc_mbx_operations {
+	s32 (*init_params)(struct igc_hw *hw);
+};
+
+struct igc_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct igc_mbx_info {
+	struct igc_mbx_operations ops;
+	struct igc_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u16 size;
+};
+
+struct igc_dev_spec_82541 {
+	enum igc_dsp_config dsp_config;
+	enum igc_ffe_config ffe_config;
+	u16 spd_default;
+	bool phy_init_script;
+};
+
+struct igc_dev_spec_82542 {
+	bool dma_fairness;
+};
+
+struct igc_dev_spec_82543 {
+	u32  tbi_compatibility;
+	bool dma_fairness;
+	bool init_phy_disabled;
+};
+
+struct igc_dev_spec_82571 {
+	bool laa_is_present;
+	u32 smb_counter;
+	IGC_MUTEX swflag_mutex;
+};
+
+struct igc_dev_spec_80003es2lan {
+	bool  mdic_wa_enable;
+};
+
+struct igc_shadow_ram {
+	u16  value;
+	bool modified;
+};
+
+#define IGC_SHADOW_RAM_WORDS		2048
+
+/* I218 PHY Ultra Low Power (ULP) states */
+enum igc_ulp_state {
+	igc_ulp_state_unknown,
+	igc_ulp_state_off,
+	igc_ulp_state_on,
+};
+
+struct igc_dev_spec_ich8lan {
+	bool kmrn_lock_loss_workaround_enabled;
+	struct igc_shadow_ram shadow_ram[IGC_SHADOW_RAM_WORDS];
+	IGC_MUTEX nvm_mutex;
+	IGC_MUTEX swflag_mutex;
+	bool nvm_k1_enabled;
+	bool disable_k1_off;
+	bool eee_disable;
+	u16 eee_lp_ability;
+	enum igc_ulp_state ulp_state;
+	bool ulp_capability_disabled;
+	bool during_suspend_flow;
+	bool during_dpg_exit;
+	u16 lat_enc;
+	u16 max_ltr_enc;
+	bool smbus_disable;
+};
+
+struct igc_dev_spec_82575 {
+	bool sgmii_active;
+	bool global_device_reset;
+	bool eee_disable;
+	bool module_plugged;
+	bool clear_semaphore_once;
+	u32 mtu;
+	struct sfp_igc_flags eth_flags;
+	u8 media_port;
+	bool media_changed;
+};
+
+struct igc_dev_spec_vf {
+	u32 vf_number;
+	u32 v2p_mailbox;
+};
+
+struct igc_dev_spec_i225 {
+	bool global_device_reset;
+	bool eee_disable;
+	bool clear_semaphore_once;
+	bool module_plugged;
+	u8 media_port;
+	bool mas_capable;
+	u32 mtu;
+};
+
+struct igc_hw {
+	void *back;
+
+	u8 *hw_addr;
+	u8 *flash_address;
+	unsigned long io_base;
+
+	struct igc_mac_info  mac;
+	struct igc_fc_info   fc;
+	struct igc_phy_info  phy;
+	struct igc_nvm_info  nvm;
+	struct igc_bus_info  bus;
+	struct igc_mbx_info mbx;
+	struct igc_host_mng_dhcp_cookie mng_cookie;
+
+	union {
+		struct igc_dev_spec_82541 _82541;
+		struct igc_dev_spec_82542 _82542;
+		struct igc_dev_spec_82543 _82543;
+		struct igc_dev_spec_82571 _82571;
+		struct igc_dev_spec_80003es2lan _80003es2lan;
+		struct igc_dev_spec_ich8lan ich8lan;
+		struct igc_dev_spec_82575 _82575;
+		struct igc_dev_spec_vf vf;
+		struct igc_dev_spec_i225 _i225;
+	} dev_spec;
+
+	u16 device_id;
+	u16 subsystem_vendor_id;
+	u16 subsystem_device_id;
+	u16 vendor_id;
+
+	u8  revision_id;
+};
+
+#include "igc_82571.h"
+#include "igc_ich8lan.h"
+#include "igc_82575.h"
+#include "igc_i225.h"
+#include "igc_base.h"
+
+/* These functions must be implemented by drivers */
+void igc_pci_clear_mwi(struct igc_hw *hw);
+void igc_pci_set_mwi(struct igc_hw *hw);
+s32  igc_read_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value);
+s32  igc_write_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value);
+void igc_read_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value);
+void igc_write_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value);
+
+#endif
diff --git a/drivers/net/igc/base/igc_i225.c b/drivers/net/igc/base/igc_i225.c
new file mode 100644
index 0000000..7a6051c
--- /dev/null
+++ b/drivers/net/igc/base/igc_i225.c
@@ -0,0 +1,1378 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+
+static s32 igc_init_nvm_params_i225(struct igc_hw *hw);
+static s32 igc_init_mac_params_i225(struct igc_hw *hw);
+static s32 igc_init_phy_params_i225(struct igc_hw *hw);
+static s32 igc_reset_hw_i225(struct igc_hw *hw);
+static s32 igc_acquire_nvm_i225(struct igc_hw *hw);
+static void igc_release_nvm_i225(struct igc_hw *hw);
+static s32 igc_get_hw_semaphore_i225(struct igc_hw *hw);
+static s32 __igc_write_nvm_srwr(struct igc_hw *hw, u16 offset, u16 words,
+				  u16 *data);
+static s32 igc_pool_flash_update_done_i225(struct igc_hw *hw);
+static s32 igc_valid_led_default_i225(struct igc_hw *hw, u16 *data);
+
+/**
+ *  igc_init_nvm_params_i225 - Init NVM func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 igc_init_nvm_params_i225(struct igc_hw *hw)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 eecd = IGC_READ_REG(hw, IGC_EECD);
+	u16 size;
+
+	DEBUGFUNC("igc_init_nvm_params_i225");
+
+	size = (u16)((eecd & IGC_EECD_SIZE_EX_MASK) >>
+		     IGC_EECD_SIZE_EX_SHIFT);
+	/*
+	 * Added to a constant, "size" becomes the left-shift value
+	 * for setting word_size.
+	 */
+	size += NVM_WORD_SIZE_BASE_SHIFT;
+
+	/* Just in case size is out of range, cap it to the largest
+	 * EEPROM size supported
+	 */
+	if (size > 15)
+		size = 15;
+
+	nvm->word_size = 1 << size;
+	nvm->opcode_bits = 8;
+	nvm->delay_usec = 1;
+	nvm->type = igc_nvm_eeprom_spi;
+
+
+	nvm->page_size = eecd & IGC_EECD_ADDR_BITS ? 32 : 8;
+	nvm->address_bits = eecd & IGC_EECD_ADDR_BITS ?
+			    16 : 8;
+
+	if (nvm->word_size == (1 << 15))
+		nvm->page_size = 128;
+
+	nvm->ops.acquire = igc_acquire_nvm_i225;
+	nvm->ops.release = igc_release_nvm_i225;
+	nvm->ops.valid_led_default = igc_valid_led_default_i225;
+	if (igc_get_flash_presence_i225(hw)) {
+		hw->nvm.type = igc_nvm_flash_hw;
+		nvm->ops.read    = igc_read_nvm_srrd_i225;
+		nvm->ops.write   = igc_write_nvm_srwr_i225;
+		nvm->ops.validate = igc_validate_nvm_checksum_i225;
+		nvm->ops.update   = igc_update_nvm_checksum_i225;
+	} else {
+		hw->nvm.type = igc_nvm_invm;
+		nvm->ops.write    = igc_null_write_nvm;
+		nvm->ops.validate = igc_null_ops_generic;
+		nvm->ops.update   = igc_null_ops_generic;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_init_mac_params_i225 - Init MAC func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 igc_init_mac_params_i225(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	struct igc_dev_spec_i225 *dev_spec = &hw->dev_spec._i225;
+
+	DEBUGFUNC("igc_init_mac_params_i225");
+
+	/* Initialize function pointer */
+	igc_init_mac_ops_generic(hw);
+
+	/* Set media type */
+	hw->phy.media_type = igc_media_type_copper;
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = IGC_RAR_ENTRIES_BASE;
+
+	/* reset */
+	mac->ops.reset_hw = igc_reset_hw_i225;
+	/* hw initialization */
+	mac->ops.init_hw = igc_init_hw_i225;
+	/* link setup */
+	mac->ops.setup_link = igc_setup_link_generic;
+	/* check for link */
+	mac->ops.check_for_link = igc_check_for_link_i225;
+	/* link info */
+	mac->ops.get_link_up_info = igc_get_speed_and_duplex_copper_generic;
+	/* acquire SW_FW sync */
+	mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225;
+	/* release SW_FW sync */
+	mac->ops.release_swfw_sync = igc_release_swfw_sync_i225;
+
+	/* Allow a single clear of the SW semaphore on I225 */
+	dev_spec->clear_semaphore_once = true;
+	mac->ops.setup_physical_interface = igc_setup_copper_link_i225;
+
+	/* Set if part includes ASF firmware */
+	mac->asf_firmware_present = true;
+
+	/* multicast address update */
+	mac->ops.update_mc_addr_list = igc_update_mc_addr_list_generic;
+
+	mac->ops.write_vfta = igc_write_vfta_generic;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_init_phy_params_i225 - Init PHY func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 igc_init_phy_params_i225(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val = IGC_SUCCESS;
+	u32 ctrl_ext;
+
+	DEBUGFUNC("igc_init_phy_params_i225");
+
+	phy->ops.read_i2c_byte = igc_read_i2c_byte_generic;
+	phy->ops.write_i2c_byte = igc_write_i2c_byte_generic;
+
+	if (hw->phy.media_type != igc_media_type_copper) {
+		phy->type = igc_phy_none;
+		goto out;
+	}
+
+	phy->ops.power_up   = igc_power_up_phy_copper;
+	phy->ops.power_down = igc_power_down_phy_copper_base;
+
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT_2500;
+
+	phy->reset_delay_us	= 100;
+
+	phy->ops.acquire	= igc_acquire_phy_base;
+	phy->ops.check_reset_block = igc_check_reset_block_generic;
+	phy->ops.commit		= igc_phy_sw_reset_generic;
+	phy->ops.release	= igc_release_phy_base;
+
+	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
+
+	/* Make sure the PHY is in a good state. Several people have reported
+	 * firmware leaving the PHY's page select register set to something
+	 * other than the default of zero, which causes the PHY ID read to
+	 * access something other than the intended register.
+	 */
+	ret_val = hw->phy.ops.reset(hw);
+	if (ret_val)
+		goto out;
+
+	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext);
+	phy->ops.read_reg = igc_read_phy_reg_gpy;
+	phy->ops.write_reg = igc_write_phy_reg_gpy;
+
+	ret_val = igc_get_phy_id(hw);
+	/* Verify phy id and set remaining function pointers */
+	switch (phy->id) {
+	case I225_I_PHY_ID:
+		phy->type		= igc_phy_i225;
+		phy->ops.set_d0_lplu_state = igc_set_d0_lplu_state_i225;
+		phy->ops.set_d3_lplu_state = igc_set_d3_lplu_state_i225;
+		/* TODO - complete with GPY PHY information */
+		break;
+	default:
+		ret_val = -IGC_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igc_reset_hw_i225 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state.
+ **/
+static s32 igc_reset_hw_i225(struct igc_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	DEBUGFUNC("igc_reset_hw_i225");
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = igc_disable_pcie_master_generic(hw);
+	if (ret_val)
+		DEBUGOUT("PCI-E Master disable polling has failed.\n");
+
+	DEBUGOUT("Masking off all interrupts\n");
+	IGC_WRITE_REG(hw, IGC_IMC, 0xffffffff);
+
+	IGC_WRITE_REG(hw, IGC_RCTL, 0);
+	IGC_WRITE_REG(hw, IGC_TCTL, IGC_TCTL_PSP);
+	IGC_WRITE_FLUSH(hw);
+
+	msec_delay(10);
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+
+	DEBUGOUT("Issuing a global reset to MAC\n");
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl | IGC_CTRL_RST);
+
+	ret_val = igc_get_auto_rd_done_generic(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		DEBUGOUT("Auto Read Done did not complete\n");
+	}
+
+	/* Clear any pending interrupt events. */
+	IGC_WRITE_REG(hw, IGC_IMC, 0xffffffff);
+	IGC_READ_REG(hw, IGC_ICR);
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = igc_check_alt_mac_addr_generic(hw);
+
+	return ret_val;
+}
+
+/* igc_acquire_nvm_i225 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -IGC_ERR_NVM (-1).
+ */
+static s32 igc_acquire_nvm_i225(struct igc_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_acquire_nvm_i225");
+
+	ret_val = igc_acquire_swfw_sync_i225(hw, IGC_SWFW_EEP_SM);
+
+	return ret_val;
+}
+
+/* igc_release_nvm_i225 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ */
+static void igc_release_nvm_i225(struct igc_hw *hw)
+{
+	DEBUGFUNC("igc_release_nvm_i225");
+
+	igc_release_swfw_sync_i225(hw, IGC_SWFW_EEP_SM);
+}
+
+/* igc_acquire_swfw_sync_i225 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
+ * will also specify which port we're acquiring the lock for.
+ */
+s32 igc_acquire_swfw_sync_i225(struct igc_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	s32 ret_val = IGC_SUCCESS;
+	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+	DEBUGFUNC("igc_acquire_swfw_sync_i225");
+
+	while (i < timeout) {
+		if (igc_get_hw_semaphore_i225(hw)) {
+			ret_val = -IGC_ERR_SWFW_SYNC;
+			goto out;
+		}
+
+		swfw_sync = IGC_READ_REG(hw, IGC_SW_FW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask)))
+			break;
+
+		/* Firmware currently using resource (fwmask)
+		 * or other software thread using resource (swmask)
+		 */
+		igc_put_hw_semaphore_generic(hw);
+		msec_delay_irq(5);
+		i++;
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+		ret_val = -IGC_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	swfw_sync |= swmask;
+	IGC_WRITE_REG(hw, IGC_SW_FW_SYNC, swfw_sync);
+
+	igc_put_hw_semaphore_generic(hw);
+
+out:
+	return ret_val;
+}
+
+/* igc_release_swfw_sync_i225 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM.  The mask
+ * will also specify which port we're releasing the lock for.
+ */
+void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+
+	DEBUGFUNC("igc_release_swfw_sync_i225");
+
+	while (igc_get_hw_semaphore_i225(hw) != IGC_SUCCESS)
+		; /* Empty */
+
+	swfw_sync = IGC_READ_REG(hw, IGC_SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	IGC_WRITE_REG(hw, IGC_SW_FW_SYNC, swfw_sync);
+
+	igc_put_hw_semaphore_generic(hw);
+}
+
+/*
+ * igc_setup_copper_link_i225 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex.  Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ */
+s32 igc_setup_copper_link_i225(struct igc_hw *hw)
+{
+	u32 phpm_reg;
+	s32 ret_val;
+	u32 ctrl;
+
+	DEBUGFUNC("igc_setup_copper_link_i225");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	ctrl |= IGC_CTRL_SLU;
+	ctrl &= ~(IGC_CTRL_FRCSPD | IGC_CTRL_FRCDPX);
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+
+	phpm_reg = IGC_READ_REG(hw, IGC_I225_PHPM);
+	phpm_reg &= ~IGC_I225_PHPM_GO_LINKD;
+	IGC_WRITE_REG(hw, IGC_I225_PHPM, phpm_reg);
+
+	ret_val = igc_setup_copper_link_generic(hw);
+
+	return ret_val;
+}
+
+/* igc_get_hw_semaphore_i225 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ */
+static s32 igc_get_hw_semaphore_i225(struct igc_hw *hw)
+{
+	u32 swsm;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	DEBUGFUNC("igc_get_hw_semaphore_i225");
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = IGC_READ_REG(hw, IGC_SWSM);
+		if (!(swsm & IGC_SWSM_SMBI))
+			break;
+
+		usec_delay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		/* In rare circumstances, the SW semaphore may already be held
+		 * unintentionally. Clear the semaphore once before giving up.
+		 */
+		if (hw->dev_spec._i225.clear_semaphore_once) {
+			hw->dev_spec._i225.clear_semaphore_once = false;
+			igc_put_hw_semaphore_generic(hw);
+			for (i = 0; i < timeout; i++) {
+				swsm = IGC_READ_REG(hw, IGC_SWSM);
+				if (!(swsm & IGC_SWSM_SMBI))
+					break;
+
+				usec_delay(50);
+			}
+		}
+
+		/* If we do not have the semaphore here, we have to give up. */
+		if (i == timeout) {
+			DEBUGOUT("Driver can't access device -\n");
+			DEBUGOUT("SMBI bit is set.\n");
+			return -IGC_ERR_NVM;
+		}
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = IGC_READ_REG(hw, IGC_SWSM);
+		IGC_WRITE_REG(hw, IGC_SWSM, swsm | IGC_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (IGC_READ_REG(hw, IGC_SWSM) & IGC_SWSM_SWESMBI)
+			break;
+
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		igc_put_hw_semaphore_generic(hw);
+		DEBUGOUT("Driver can't access the NVM\n");
+		return -IGC_ERR_NVM;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/* igc_read_nvm_srrd_i225 - Reads Shadow Ram using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the Shadow Ram to read
+ * @words: number of words to read
+ * @data: word read from the Shadow Ram
+ *
+ * Reads a 16 bit word from the Shadow Ram using the EERD register.
+ * Uses necessary synchronization semaphores.
+ */
+s32 igc_read_nvm_srrd_i225(struct igc_hw *hw, u16 offset, u16 words,
+			     u16 *data)
+{
+	s32 status = IGC_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("igc_read_nvm_srrd_i225");
+
+	/* We cannot hold synchronization semaphores for too long,
+	 * because of forceful takeover procedure. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) {
+		count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ?
+			IGC_EERD_EEWR_MAX_COUNT : (words - i);
+		if (hw->nvm.ops.acquire(hw) == IGC_SUCCESS) {
+			status = igc_read_nvm_eerd(hw, offset, count,
+						     data + i);
+			hw->nvm.ops.release(hw);
+		} else {
+			status = IGC_ERR_SWFW_SYNC;
+		}
+
+		if (status != IGC_SUCCESS)
+			break;
+	}
+
+	return status;
+}
+
+/* igc_write_nvm_srwr_i225 - Write to Shadow RAM using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow RAM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ * Writes data to Shadow RAM at offset using EEWR register.
+ *
+ * If igc_update_nvm_checksum is not called after this function , the
+ * data will not be committed to FLASH and also Shadow RAM will most likely
+ * contain an invalid checksum.
+ *
+ * If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ * partially written.
+ */
+s32 igc_write_nvm_srwr_i225(struct igc_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	s32 status = IGC_SUCCESS;
+	u16 i, count;
+
+	DEBUGFUNC("igc_write_nvm_srwr_i225");
+
+	/* We cannot hold synchronization semaphores for too long,
+	 * because of forceful takeover procedure. However it is more efficient
+	 * to write in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) {
+		count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ?
+			IGC_EERD_EEWR_MAX_COUNT : (words - i);
+		if (hw->nvm.ops.acquire(hw) == IGC_SUCCESS) {
+			status = __igc_write_nvm_srwr(hw, offset, count,
+							data + i);
+			hw->nvm.ops.release(hw);
+		} else {
+			status = IGC_ERR_SWFW_SYNC;
+		}
+
+		if (status != IGC_SUCCESS)
+			break;
+	}
+
+	return status;
+}
+
+/* __igc_write_nvm_srwr - Write to Shadow Ram using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow Ram to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow Ram
+ *
+ * Writes data to Shadow Ram at offset using EEWR register.
+ *
+ * If igc_update_nvm_checksum is not called after this function , the
+ * Shadow Ram will most likely contain an invalid checksum.
+ */
+static s32 __igc_write_nvm_srwr(struct igc_hw *hw, u16 offset, u16 words,
+				  u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 i, k, eewr = 0;
+	u32 attempts = 100000;
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("__igc_write_nvm_srwr");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		ret_val = -IGC_ERR_NVM;
+		goto out;
+	}
+
+	for (i = 0; i < words; i++) {
+		eewr = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) |
+			(data[i] << IGC_NVM_RW_REG_DATA) |
+			IGC_NVM_RW_REG_START;
+
+		IGC_WRITE_REG(hw, IGC_SRWR, eewr);
+
+		for (k = 0; k < attempts; k++) {
+			if (IGC_NVM_RW_REG_DONE &
+			    IGC_READ_REG(hw, IGC_SRWR)) {
+				ret_val = IGC_SUCCESS;
+				break;
+			}
+			usec_delay(5);
+		}
+
+		if (ret_val != IGC_SUCCESS) {
+			DEBUGOUT("Shadow RAM write EEWR timed out\n");
+			break;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/* igc_read_invm_version_i225 - Reads iNVM version and image type
+ * @hw: pointer to the HW structure
+ * @invm_ver: version structure for the version read
+ *
+ * Reads iNVM version and image type.
+ */
+s32 igc_read_invm_version_i225(struct igc_hw *hw,
+				 struct igc_fw_version *invm_ver)
+{
+	u32 *record = NULL;
+	u32 *next_record = NULL;
+	u32 i = 0;
+	u32 invm_dword = 0;
+	u32 invm_blocks = IGC_INVM_SIZE - (IGC_INVM_ULT_BYTES_SIZE /
+					     IGC_INVM_RECORD_SIZE_IN_BYTES);
+	u32 buffer[IGC_INVM_SIZE];
+	s32 status = -IGC_ERR_INVM_VALUE_NOT_FOUND;
+	u16 version = 0;
+
+	DEBUGFUNC("igc_read_invm_version_i225");
+
+	/* Read iNVM memory */
+	for (i = 0; i < IGC_INVM_SIZE; i++) {
+		invm_dword = IGC_READ_REG(hw, IGC_INVM_DATA_REG(i));
+		buffer[i] = invm_dword;
+	}
+
+	/* Read version number */
+	for (i = 1; i < invm_blocks; i++) {
+		record = &buffer[invm_blocks - i];
+		next_record = &buffer[invm_blocks - i + 1];
+
+		/* Check if we have first version location used */
+		if (i == 1 && (*record & IGC_INVM_VER_FIELD_ONE) == 0) {
+			version = 0;
+			status = IGC_SUCCESS;
+			break;
+		}
+		/* Check if we have second version location used */
+		else if ((i == 1) &&
+			 ((*record & IGC_INVM_VER_FIELD_TWO) == 0)) {
+			version = (*record & IGC_INVM_VER_FIELD_ONE) >> 3;
+			status = IGC_SUCCESS;
+			break;
+		}
+		/* Check if we have odd version location
+		 * used and it is the last one used
+		 */
+		else if ((((*record & IGC_INVM_VER_FIELD_ONE) == 0) &&
+			  ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
+			   (i != 1))) {
+			version = (*next_record & IGC_INVM_VER_FIELD_TWO)
+				  >> 13;
+			status = IGC_SUCCESS;
+			break;
+		}
+		/* Check if we have even version location
+		 * used and it is the last one used
+		 */
+		else if (((*record & IGC_INVM_VER_FIELD_TWO) == 0) &&
+			 ((*record & 0x3) == 0)) {
+			version = (*record & IGC_INVM_VER_FIELD_ONE) >> 3;
+			status = IGC_SUCCESS;
+			break;
+		}
+	}
+
+	if (status == IGC_SUCCESS) {
+		invm_ver->invm_major = (version & IGC_INVM_MAJOR_MASK)
+					>> IGC_INVM_MAJOR_SHIFT;
+		invm_ver->invm_minor = version & IGC_INVM_MINOR_MASK;
+	}
+	/* Read Image Type */
+	for (i = 1; i < invm_blocks; i++) {
+		record = &buffer[invm_blocks - i];
+		next_record = &buffer[invm_blocks - i + 1];
+
+		/* Check if we have image type in first location used */
+		if (i == 1 && (*record & IGC_INVM_IMGTYPE_FIELD) == 0) {
+			invm_ver->invm_img_type = 0;
+			status = IGC_SUCCESS;
+			break;
+		}
+		/* Check if we have image type in first location used */
+		else if ((((*record & 0x3) == 0) &&
+			  ((*record & IGC_INVM_IMGTYPE_FIELD) == 0)) ||
+			    ((((*record & 0x3) != 0) && (i != 1)))) {
+			invm_ver->invm_img_type =
+				(*next_record & IGC_INVM_IMGTYPE_FIELD) >> 23;
+			status = IGC_SUCCESS;
+			break;
+		}
+	}
+	return status;
+}
+
+/* igc_validate_nvm_checksum_i225 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ */
+s32 igc_validate_nvm_checksum_i225(struct igc_hw *hw)
+{
+	s32 status = IGC_SUCCESS;
+	s32 (*read_op_ptr)(struct igc_hw *hw, u16 offset,
+			u16 count, u16 *data);
+
+	DEBUGFUNC("igc_validate_nvm_checksum_i225");
+
+	if (hw->nvm.ops.acquire(hw) == IGC_SUCCESS) {
+		/* Replace the read function with semaphore grabbing with
+		 * the one that skips this for a while.
+		 * We have semaphore taken already here.
+		 */
+		read_op_ptr = hw->nvm.ops.read;
+		hw->nvm.ops.read = igc_read_nvm_eerd;
+
+		status = igc_validate_nvm_checksum_generic(hw);
+
+		/* Revert original read operation. */
+		hw->nvm.ops.read = read_op_ptr;
+
+		hw->nvm.ops.release(hw);
+	} else {
+		status = IGC_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/* igc_update_nvm_checksum_i225 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum.  Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM. Next commit EEPROM data onto the Flash.
+ */
+s32 igc_update_nvm_checksum_i225(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("igc_update_nvm_checksum_i225");
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	ret_val = igc_read_nvm_eerd(hw, 0, 1, &nvm_data);
+	if (ret_val != IGC_SUCCESS) {
+		DEBUGOUT("EEPROM read failed\n");
+		goto out;
+	}
+
+	if (hw->nvm.ops.acquire(hw) == IGC_SUCCESS) {
+		/* Do not use hw->nvm.ops.write, hw->nvm.ops.read
+		 * because we do not want to take the synchronization
+		 * semaphores twice here.
+		 */
+
+		for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+			ret_val = igc_read_nvm_eerd(hw, i, 1, &nvm_data);
+			if (ret_val) {
+				hw->nvm.ops.release(hw);
+				DEBUGOUT("NVM Read Error while updating\n");
+				DEBUGOUT("checksum.\n");
+				goto out;
+			}
+			checksum += nvm_data;
+		}
+		checksum = (u16)NVM_SUM - checksum;
+		ret_val = __igc_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
+						 &checksum);
+		if (ret_val != IGC_SUCCESS) {
+			hw->nvm.ops.release(hw);
+			DEBUGOUT("NVM Write Error while updating checksum.\n");
+			goto out;
+		}
+
+		hw->nvm.ops.release(hw);
+
+		ret_val = igc_update_flash_i225(hw);
+	} else {
+		ret_val = IGC_ERR_SWFW_SYNC;
+	}
+out:
+	return ret_val;
+}
+
+/* igc_get_flash_presence_i225 - Check if flash device is detected.
+ * @hw: pointer to the HW structure
+ */
+bool igc_get_flash_presence_i225(struct igc_hw *hw)
+{
+	u32 eec = 0;
+	bool ret_val = false;
+
+	DEBUGFUNC("igc_get_flash_presence_i225");
+
+	eec = IGC_READ_REG(hw, IGC_EECD);
+
+	if (eec & IGC_EECD_FLASH_DETECTED_I225)
+		ret_val = true;
+
+	return ret_val;
+}
+
+/* igc_set_flsw_flash_burst_counter_i225 - sets FLSW NVM Burst
+ * Counter in FLSWCNT register.
+ *
+ * @hw: pointer to the HW structure
+ * @burst_counter: size in bytes of the Flash burst to read or write
+ */
+s32 igc_set_flsw_flash_burst_counter_i225(struct igc_hw *hw,
+					    u32 burst_counter)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_set_flsw_flash_burst_counter_i225");
+
+	/* Validate input data */
+	if (burst_counter < IGC_I225_SHADOW_RAM_SIZE) {
+		/* Write FLSWCNT - burst counter */
+		IGC_WRITE_REG(hw, IGC_I225_FLSWCNT, burst_counter);
+	} else {
+		ret_val = IGC_ERR_INVALID_ARGUMENT;
+	}
+
+	return ret_val;
+}
+
+/* igc_write_erase_flash_command_i225 - write/erase to a sector
+ * region on a given address.
+ *
+ * @hw: pointer to the HW structure
+ * @opcode: opcode to be used for the write command
+ * @address: the offset to write into the FLASH image
+ */
+s32 igc_write_erase_flash_command_i225(struct igc_hw *hw, u32 opcode,
+					 u32 address)
+{
+	u32 flswctl = 0;
+	s32 timeout = IGC_NVM_GRANT_ATTEMPTS;
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_write_erase_flash_command_i225");
+
+	flswctl = IGC_READ_REG(hw, IGC_I225_FLSWCTL);
+	/* Polling done bit on FLSWCTL register */
+	while (timeout) {
+		if (flswctl & IGC_FLSWCTL_DONE)
+			break;
+		usec_delay(5);
+		flswctl = IGC_READ_REG(hw, IGC_I225_FLSWCTL);
+		timeout--;
+	}
+
+	if (!timeout) {
+		DEBUGOUT("Flash transaction was not done\n");
+		return -IGC_ERR_NVM;
+	}
+
+	/* Build and issue command on FLSWCTL register */
+	flswctl = address | opcode;
+	IGC_WRITE_REG(hw, IGC_I225_FLSWCTL, flswctl);
+
+	/* Check if issued command is valid on FLSWCTL register */
+	flswctl = IGC_READ_REG(hw, IGC_I225_FLSWCTL);
+	if (!(flswctl & IGC_FLSWCTL_CMDV)) {
+		DEBUGOUT("Write flash command failed\n");
+		ret_val = IGC_ERR_INVALID_ARGUMENT;
+	}
+
+	return ret_val;
+}
+
+/* igc_update_flash_i225 - Commit EEPROM to the flash
+ * if fw_valid_bit is set, FW is active. setting FLUPD bit in EEC
+ * register makes the FW load the internal shadow RAM into the flash.
+ * Otherwise, fw_valid_bit is 0. if FL_SECU.block_prtotected_sw = 0
+ * then FW is not active so the SW is responsible shadow RAM dump.
+ *
+ * @hw: pointer to the HW structure
+ */
+s32 igc_update_flash_i225(struct igc_hw *hw)
+{
+	u16 current_offset_data = 0;
+	u32 block_sw_protect = 1;
+	u16 base_address = 0x0;
+	u32 i, fw_valid_bit;
+	u16 current_offset;
+	s32 ret_val = 0;
+	u32 flup;
+
+	DEBUGFUNC("igc_update_flash_i225");
+
+	block_sw_protect = IGC_READ_REG(hw, IGC_I225_FLSECU) &
+					  IGC_FLSECU_BLK_SW_ACCESS_I225;
+	fw_valid_bit = IGC_READ_REG(hw, IGC_FWSM) &
+				      IGC_FWSM_FW_VALID_I225;
+	if (fw_valid_bit) {
+		ret_val = igc_pool_flash_update_done_i225(hw);
+		if (ret_val == -IGC_ERR_NVM) {
+			DEBUGOUT("Flash update time out\n");
+			goto out;
+		}
+
+		flup = IGC_READ_REG(hw, IGC_EECD) | IGC_EECD_FLUPD_I225;
+		IGC_WRITE_REG(hw, IGC_EECD, flup);
+
+		ret_val = igc_pool_flash_update_done_i225(hw);
+		if (ret_val == IGC_SUCCESS)
+			DEBUGOUT("Flash update complete\n");
+		else
+			DEBUGOUT("Flash update time out\n");
+	} else if (!block_sw_protect) {
+		/* FW is not active and security protection is disabled.
+		 * therefore, SW is in charge of shadow RAM dump.
+		 * Check which sector is valid. if sector 0 is valid,
+		 * base address remains 0x0. otherwise, sector 1 is
+		 * valid and it's base address is 0x1000
+		 */
+		if (IGC_READ_REG(hw, IGC_EECD) & IGC_EECD_SEC1VAL_I225)
+			base_address = 0x1000;
+
+		/* Valid sector erase */
+		ret_val = igc_write_erase_flash_command_i225(hw,
+						  IGC_I225_ERASE_CMD_OPCODE,
+						  base_address);
+		if (!ret_val) {
+			DEBUGOUT("Sector erase failed\n");
+			goto out;
+		}
+
+		current_offset = base_address;
+
+		/* Write */
+		for (i = 0; i < IGC_I225_SHADOW_RAM_SIZE / 2; i++) {
+			/* Set burst write length */
+			ret_val = igc_set_flsw_flash_burst_counter_i225(hw,
+									  0x2);
+			if (ret_val != IGC_SUCCESS)
+				break;
+
+			/* Set address and opcode */
+			ret_val = igc_write_erase_flash_command_i225(hw,
+						IGC_I225_WRITE_CMD_OPCODE,
+						2 * current_offset);
+			if (ret_val != IGC_SUCCESS)
+				break;
+
+			ret_val = igc_read_nvm_eerd(hw, current_offset,
+						      1, &current_offset_data);
+			if (ret_val) {
+				DEBUGOUT("Failed to read from EEPROM\n");
+				goto out;
+			}
+
+			/* Write CurrentOffseData to FLSWDATA register */
+			IGC_WRITE_REG(hw, IGC_I225_FLSWDATA,
+					current_offset_data);
+			current_offset++;
+
+			/* Wait till operation has finished */
+			ret_val = igc_poll_eerd_eewr_done(hw,
+						IGC_NVM_POLL_READ);
+			if (ret_val)
+				break;
+
+			usec_delay(1000);
+		}
+	}
+out:
+	return ret_val;
+}
+
+/* igc_pool_flash_update_done_i225 - Pool FLUDONE status.
+ * @hw: pointer to the HW structure
+ */
+s32 igc_pool_flash_update_done_i225(struct igc_hw *hw)
+{
+	s32 ret_val = -IGC_ERR_NVM;
+	u32 i, reg;
+
+	DEBUGFUNC("igc_pool_flash_update_done_i225");
+
+	for (i = 0; i < IGC_FLUDONE_ATTEMPTS; i++) {
+		reg = IGC_READ_REG(hw, IGC_EECD);
+		if (reg & IGC_EECD_FLUDONE_I225) {
+			ret_val = IGC_SUCCESS;
+			break;
+		}
+		usec_delay(5);
+	}
+
+	return ret_val;
+}
+
+/* igc_set_ltr_i225 - Set Latency Tolerance Reporting thresholds.
+ * @hw: pointer to the HW structure
+ * @link: bool indicating link status
+ *
+ * Set the LTR thresholds based on the link speed (Mbps), EEE, and DMAC
+ * settings, otherwise specify that there is no LTR requirement.
+ */
+static s32 igc_set_ltr_i225(struct igc_hw *hw, bool link)
+{
+	u16 speed, duplex;
+	u32 tw_system, ltrc, ltrv, ltr_min, ltr_max, scale_min, scale_max;
+	s32 size;
+
+	DEBUGFUNC("igc_set_ltr_i225");
+
+	/* If we do not have link, LTR thresholds are zero. */
+	if (link) {
+		hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+
+		/* Check if using copper interface with EEE enabled or if the
+		 * link speed is 10 Mbps.
+		 */
+		if (hw->phy.media_type == igc_media_type_copper &&
+				!hw->dev_spec._i225.eee_disable &&
+				speed != SPEED_10) {
+			/* EEE enabled, so send LTRMAX threshold. */
+			ltrc = IGC_READ_REG(hw, IGC_LTRC) |
+				IGC_LTRC_EEEMS_EN;
+			IGC_WRITE_REG(hw, IGC_LTRC, ltrc);
+
+			/* Calculate tw_system (nsec). */
+			if (speed == SPEED_100)
+				tw_system = ((IGC_READ_REG(hw, IGC_EEE_SU) &
+					IGC_TW_SYSTEM_100_MASK) >>
+					IGC_TW_SYSTEM_100_SHIFT) * 500;
+			else
+				tw_system = (IGC_READ_REG(hw, IGC_EEE_SU) &
+					IGC_TW_SYSTEM_1000_MASK) * 500;
+		} else {
+			tw_system = 0;
+		}
+
+		/* Get the Rx packet buffer size. */
+		size = IGC_READ_REG(hw, IGC_RXPBS) &
+			IGC_RXPBS_SIZE_I225_MASK;
+
+		/* Calculations vary based on DMAC settings. */
+		if (IGC_READ_REG(hw, IGC_DMACR) & IGC_DMACR_DMAC_EN) {
+			size -= (IGC_READ_REG(hw, IGC_DMACR) &
+				 IGC_DMACR_DMACTHR_MASK) >>
+				 IGC_DMACR_DMACTHR_SHIFT;
+			/* Convert size to bits. */
+			size *= 1024 * 8;
+		} else {
+			/* Convert size to bytes, subtract the MTU, and then
+			 * convert the size to bits.
+			 */
+			size *= 1024;
+			size -= hw->dev_spec._i225.mtu;
+			size *= 8;
+		}
+
+		if (size < 0) {
+			DEBUGOUT1("Invalid effective Rx buffer size %d\n",
+				  size);
+			return -IGC_ERR_CONFIG;
+		}
+
+		/* Calculate the thresholds. Since speed is in Mbps, simplify
+		 * the calculation by multiplying size/speed by 1000 for result
+		 * to be in nsec before dividing by the scale in nsec. Set the
+		 * scale such that the LTR threshold fits in the register.
+		 */
+		ltr_min = (1000 * size) / speed;
+		ltr_max = ltr_min + tw_system;
+		scale_min = (ltr_min / 1024) < 1024 ? IGC_LTRMINV_SCALE_1024 :
+			    IGC_LTRMINV_SCALE_32768;
+		scale_max = (ltr_max / 1024) < 1024 ? IGC_LTRMAXV_SCALE_1024 :
+			    IGC_LTRMAXV_SCALE_32768;
+		ltr_min /= scale_min == IGC_LTRMINV_SCALE_1024 ? 1024 : 32768;
+		ltr_max /= scale_max == IGC_LTRMAXV_SCALE_1024 ? 1024 : 32768;
+
+		/* Only write the LTR thresholds if they differ from before. */
+		ltrv = IGC_READ_REG(hw, IGC_LTRMINV);
+		if (ltr_min != (ltrv & IGC_LTRMINV_LTRV_MASK)) {
+			ltrv = IGC_LTRMINV_LSNP_REQ | ltr_min |
+			      (scale_min << IGC_LTRMINV_SCALE_SHIFT);
+			IGC_WRITE_REG(hw, IGC_LTRMINV, ltrv);
+		}
+
+		ltrv = IGC_READ_REG(hw, IGC_LTRMAXV);
+		if (ltr_max != (ltrv & IGC_LTRMAXV_LTRV_MASK)) {
+			ltrv = IGC_LTRMAXV_LSNP_REQ | ltr_max |
+			      (scale_min << IGC_LTRMAXV_SCALE_SHIFT);
+			IGC_WRITE_REG(hw, IGC_LTRMAXV, ltrv);
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/* igc_check_for_link_i225 - Check for link
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed.  If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ */
+s32 igc_check_for_link_i225(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link = false;
+
+	DEBUGFUNC("igc_check_for_link_i225");
+
+	/* We only want to go out to the PHY registers to see if
+	 * Auto-Neg has completed and/or if our link status has
+	 * changed.  The get_link_status flag is set upon receiving
+	 * a Link Status Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = IGC_SUCCESS;
+		goto out;
+	}
+
+	/* First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	/* Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	igc_check_downshift_generic(hw);
+
+	/* If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		goto out;
+
+	/* Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+
+	/* Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = igc_config_fc_after_link_up_generic(hw);
+	if (ret_val)
+		DEBUGOUT("Error configuring flow control\n");
+out:
+	/* Now that we are aware of our link settings, we can set the LTR
+	 * thresholds.
+	 */
+	ret_val = igc_set_ltr_i225(hw, link);
+
+	return ret_val;
+}
+
+/* igc_init_function_pointers_i225 - Init func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * Called to initialize all function pointers and parameters.
+ */
+void igc_init_function_pointers_i225(struct igc_hw *hw)
+{
+	igc_init_mac_ops_generic(hw);
+	igc_init_phy_ops_generic(hw);
+	igc_init_nvm_ops_generic(hw);
+	hw->mac.ops.init_params = igc_init_mac_params_i225;
+	hw->nvm.ops.init_params = igc_init_nvm_params_i225;
+	hw->phy.ops.init_params = igc_init_phy_params_i225;
+}
+
+/* igc_valid_led_default_i225 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration.  If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ */
+static s32 igc_valid_led_default_i225(struct igc_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_valid_led_default_i225");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		goto out;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+		switch (hw->phy.media_type) {
+		case igc_media_type_internal_serdes:
+			*data = ID_LED_DEFAULT_I225_SERDES;
+			break;
+		case igc_media_type_copper:
+		default:
+			*data = ID_LED_DEFAULT_I225;
+			break;
+		}
+	}
+out:
+	return ret_val;
+}
+
+/* igc_get_cfg_done_i225 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * IGC_SUCCESS.  If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ */
+static s32 igc_get_cfg_done_i225(struct igc_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	u32 mask = IGC_NVM_CFG_DONE_PORT_0;
+
+	DEBUGFUNC("igc_get_cfg_done_i225");
+
+	while (timeout) {
+		if (IGC_READ_REG(hw, IGC_EEMNGCTL_I225) & mask)
+			break;
+		msec_delay(1);
+		timeout--;
+	}
+	if (!timeout)
+		DEBUGOUT("MNG configuration cycle has not completed.\n");
+
+	return IGC_SUCCESS;
+}
+
+/* igc_init_hw_i225 - Init hw for I225
+ * @hw: pointer to the HW structure
+ *
+ * Called to initialize hw for i225 hw family.
+ */
+s32 igc_init_hw_i225(struct igc_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_init_hw_i225");
+
+	hw->phy.ops.get_cfg_done = igc_get_cfg_done_i225;
+	ret_val = igc_init_hw_base(hw);
+	return ret_val;
+}
+
+/*
+ * igc_set_d0_lplu_state_i225 - Set Low-Power-Link-Up (LPLU) D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Note: since I225 does not actually support LPLU, this function
+ * simply enables/disables 1G and 2.5G speeds in D0.
+ */
+s32 igc_set_d0_lplu_state_i225(struct igc_hw *hw, bool active)
+{
+	u32 data;
+
+	DEBUGFUNC("igc_set_d0_lplu_state_i225");
+
+	data = IGC_READ_REG(hw, IGC_I225_PHPM);
+
+	if (active) {
+		data |= IGC_I225_PHPM_DIS_1000;
+		data |= IGC_I225_PHPM_DIS_2500;
+	} else {
+		data &= ~IGC_I225_PHPM_DIS_1000;
+		data &= ~IGC_I225_PHPM_DIS_2500;
+	}
+
+	IGC_WRITE_REG(hw, IGC_I225_PHPM, data);
+	return IGC_SUCCESS;
+}
+
+/*
+ * igc_set_d3_lplu_state_i225 - Set Low-Power-Link-Up (LPLU) D3 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Note: since I225 does not actually support LPLU, this function
+ * simply enables/disables 100M, 1G and 2.5G speeds in D3.
+ */
+s32 igc_set_d3_lplu_state_i225(struct igc_hw *hw, bool active)
+{
+	u32 data;
+
+	DEBUGFUNC("igc_set_d3_lplu_state_i225");
+
+	data = IGC_READ_REG(hw, IGC_I225_PHPM);
+
+	if (active) {
+		data |= IGC_I225_PHPM_DIS_100_D3;
+		data |= IGC_I225_PHPM_DIS_1000_D3;
+		data |= IGC_I225_PHPM_DIS_2500_D3;
+	} else {
+		data &= ~IGC_I225_PHPM_DIS_100_D3;
+		data &= ~IGC_I225_PHPM_DIS_1000_D3;
+		data &= ~IGC_I225_PHPM_DIS_2500_D3;
+	}
+
+	IGC_WRITE_REG(hw, IGC_I225_PHPM, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_eee_i225 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *  @adv2p5G: boolean flag enabling 2.5G EEE advertisement
+ *  @adv1G: boolean flag enabling 1G EEE advertisement
+ *  @adv100M: boolean flag enabling 100M EEE advertisement
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+		       bool adv100M)
+{
+	u32 ipcnfg, eeer;
+
+	DEBUGFUNC("igc_set_eee_i225");
+
+	if (hw->mac.type != igc_i225 ||
+	    hw->phy.media_type != igc_media_type_copper)
+		goto out;
+	ipcnfg = IGC_READ_REG(hw, IGC_IPCNFG);
+	eeer = IGC_READ_REG(hw, IGC_EEER);
+
+	/* enable or disable per user setting */
+	if (!(hw->dev_spec._i225.eee_disable)) {
+		u32 eee_su = IGC_READ_REG(hw, IGC_EEE_SU);
+
+		if (adv100M)
+			ipcnfg |= IGC_IPCNFG_EEE_100M_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_100M_AN;
+
+		if (adv1G)
+			ipcnfg |= IGC_IPCNFG_EEE_1G_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_1G_AN;
+
+		if (adv2p5G)
+			ipcnfg |= IGC_IPCNFG_EEE_2_5G_AN;
+		else
+			ipcnfg &= ~IGC_IPCNFG_EEE_2_5G_AN;
+
+		eeer |= (IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+			IGC_EEER_LPI_FC);
+
+		/* This bit should not be set in normal operation. */
+		if (eee_su & IGC_EEE_SU_LPI_CLK_STP)
+			DEBUGOUT("LPI Clock Stop Bit should not be set!\n");
+	} else {
+		ipcnfg &= ~(IGC_IPCNFG_EEE_2_5G_AN | IGC_IPCNFG_EEE_1G_AN |
+			IGC_IPCNFG_EEE_100M_AN);
+		eeer &= ~(IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+			IGC_EEER_LPI_FC);
+	}
+	IGC_WRITE_REG(hw, IGC_IPCNFG, ipcnfg);
+	IGC_WRITE_REG(hw, IGC_EEER, eeer);
+	IGC_READ_REG(hw, IGC_IPCNFG);
+	IGC_READ_REG(hw, IGC_EEER);
+out:
+
+	return IGC_SUCCESS;
+}
diff --git a/drivers/net/igc/base/igc_i225.h b/drivers/net/igc/base/igc_i225.h
new file mode 100644
index 0000000..bae75ac
--- /dev/null
+++ b/drivers/net/igc/base/igc_i225.h
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_I225_H_
+#define _IGC_I225_H_
+
+bool igc_get_flash_presence_i225(struct igc_hw *hw);
+s32 igc_update_flash_i225(struct igc_hw *hw);
+s32 igc_update_nvm_checksum_i225(struct igc_hw *hw);
+s32 igc_validate_nvm_checksum_i225(struct igc_hw *hw);
+s32 igc_write_nvm_srwr_i225(struct igc_hw *hw, u16 offset,
+			      u16 words, u16 *data);
+s32 igc_read_nvm_srrd_i225(struct igc_hw *hw, u16 offset,
+			     u16 words, u16 *data);
+s32 igc_read_invm_version_i225(struct igc_hw *hw,
+				 struct igc_fw_version *invm_ver);
+s32 igc_set_flsw_flash_burst_counter_i225(struct igc_hw *hw,
+					    u32 burst_counter);
+s32 igc_write_erase_flash_command_i225(struct igc_hw *hw, u32 opcode,
+					 u32 address);
+s32 igc_check_for_link_i225(struct igc_hw *hw);
+s32 igc_acquire_swfw_sync_i225(struct igc_hw *hw, u16 mask);
+void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask);
+s32 igc_init_hw_i225(struct igc_hw *hw);
+s32 igc_setup_copper_link_i225(struct igc_hw *hw);
+s32 igc_set_d0_lplu_state_i225(struct igc_hw *hw, bool active);
+s32 igc_set_d3_lplu_state_i225(struct igc_hw *hw, bool active);
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+		       bool adv100M);
+
+#define ID_LED_DEFAULT_I225		((ID_LED_OFF1_ON2  << 8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_OFF2))
+#define ID_LED_DEFAULT_I225_SERDES	((ID_LED_DEF1_DEF2 << 8) | \
+					 (ID_LED_DEF1_DEF2 <<  4) | \
+					 (ID_LED_OFF1_ON2))
+
+/* NVM offset defaults for I225 devices */
+#define NVM_INIT_CTRL_2_DEFAULT_I225	0X7243
+#define NVM_INIT_CTRL_4_DEFAULT_I225	0x00C1
+#define NVM_LED_1_CFG_DEFAULT_I225	0x0184
+#define NVM_LED_0_2_CFG_DEFAULT_I225	0x200C
+
+#define IGC_MRQC_ENABLE_RSS_4Q		0x00000002
+#define IGC_MRQC_ENABLE_VMDQ			0x00000003
+#define IGC_MRQC_ENABLE_VMDQ_RSS_2Q		0x00000005
+#define IGC_MRQC_RSS_FIELD_IPV4_UDP		0x00400000
+#define IGC_MRQC_RSS_FIELD_IPV6_UDP		0x00800000
+#define IGC_MRQC_RSS_FIELD_IPV6_UDP_EX	0x01000000
+#define IGC_I225_SHADOW_RAM_SIZE		4096
+#define IGC_I225_ERASE_CMD_OPCODE		0x02000000
+#define IGC_I225_WRITE_CMD_OPCODE		0x01000000
+#define IGC_FLSWCTL_DONE			0x40000000
+#define IGC_FLSWCTL_CMDV			0x10000000
+
+/* SRRCTL bit definitions */
+#define IGC_SRRCTL_BSIZEHDRSIZE_MASK		0x00000F00
+#define IGC_SRRCTL_DESCTYPE_LEGACY		0x00000000
+#define IGC_SRRCTL_DESCTYPE_HDR_SPLIT		0x04000000
+#define IGC_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS	0x0A000000
+#define IGC_SRRCTL_DESCTYPE_HDR_REPLICATION	0x06000000
+#define IGC_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IGC_SRRCTL_DESCTYPE_MASK		0x0E000000
+#define IGC_SRRCTL_DROP_EN			0x80000000
+#define IGC_SRRCTL_BSIZEPKT_MASK		0x0000007F
+#define IGC_SRRCTL_BSIZEHDR_MASK		0x00003F00
+
+#define IGC_RXDADV_RSSTYPE_MASK	0x0000000F
+#define IGC_RXDADV_RSSTYPE_SHIFT	12
+#define IGC_RXDADV_HDRBUFLEN_MASK	0x7FE0
+#define IGC_RXDADV_HDRBUFLEN_SHIFT	5
+#define IGC_RXDADV_SPLITHEADER_EN	0x00001000
+#define IGC_RXDADV_SPH		0x8000
+#define IGC_RXDADV_STAT_TS		0x10000 /* Pkt was time stamped */
+#define IGC_RXDADV_ERR_HBO		0x00800000
+
+/* RSS Hash results */
+#define IGC_RXDADV_RSSTYPE_NONE	0x00000000
+#define IGC_RXDADV_RSSTYPE_IPV4_TCP	0x00000001
+#define IGC_RXDADV_RSSTYPE_IPV4	0x00000002
+#define IGC_RXDADV_RSSTYPE_IPV6_TCP	0x00000003
+#define IGC_RXDADV_RSSTYPE_IPV6_EX	0x00000004
+#define IGC_RXDADV_RSSTYPE_IPV6	0x00000005
+#define IGC_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IGC_RXDADV_RSSTYPE_IPV4_UDP	0x00000007
+#define IGC_RXDADV_RSSTYPE_IPV6_UDP	0x00000008
+#define IGC_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor */
+#define IGC_RXDADV_PKTTYPE_ILMASK	0x000000F0
+#define IGC_RXDADV_PKTTYPE_TLMASK	0x00000F00
+#define IGC_RXDADV_PKTTYPE_NONE	0x00000000
+#define IGC_RXDADV_PKTTYPE_IPV4	0x00000010 /* IPV4 hdr present */
+#define IGC_RXDADV_PKTTYPE_IPV4_EX	0x00000020 /* IPV4 hdr + extensions */
+#define IGC_RXDADV_PKTTYPE_IPV6	0x00000040 /* IPV6 hdr present */
+#define IGC_RXDADV_PKTTYPE_IPV6_EX	0x00000080 /* IPV6 hdr + extensions */
+#define IGC_RXDADV_PKTTYPE_TCP	0x00000100 /* TCP hdr present */
+#define IGC_RXDADV_PKTTYPE_UDP	0x00000200 /* UDP hdr present */
+#define IGC_RXDADV_PKTTYPE_SCTP	0x00000400 /* SCTP hdr present */
+#define IGC_RXDADV_PKTTYPE_NFS	0x00000800 /* NFS hdr present */
+
+#define IGC_RXDADV_PKTTYPE_IPSEC_ESP	0x00001000 /* IPSec ESP */
+#define IGC_RXDADV_PKTTYPE_IPSEC_AH	0x00002000 /* IPSec AH */
+#define IGC_RXDADV_PKTTYPE_LINKSEC	0x00004000 /* LinkSec Encap */
+#define IGC_RXDADV_PKTTYPE_ETQF	0x00008000 /* PKTTYPE is ETQF index */
+#define IGC_RXDADV_PKTTYPE_ETQF_MASK	0x00000070 /* ETQF has 8 indices */
+#define IGC_RXDADV_PKTTYPE_ETQF_SHIFT	4 /* Right-shift 4 bits */
+
+#endif
diff --git a/drivers/net/igc/base/igc_ich8lan.h b/drivers/net/igc/base/igc_ich8lan.h
new file mode 100644
index 0000000..608716c
--- /dev/null
+++ b/drivers/net/igc/base/igc_ich8lan.h
@@ -0,0 +1,296 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_ICH8LAN_H_
+#define _IGC_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+
+#define IGC_ICH_FWSM_RSPCIPHY	0x00000040 /* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define IGC_ICH_FWSM_FW_VALID	0x00008000
+#define IGC_ICH_FWSM_PCIM2PCI	0x01000000 /* ME PCIm-to-PCI active */
+#define IGC_ICH_FWSM_PCIM2PCI_COUNT	2000
+
+#define IGC_ICH_MNG_IAMT_MODE		0x2
+
+#define IGC_FWSM_WLOCK_MAC_MASK	0x0380
+#define IGC_FWSM_WLOCK_MAC_SHIFT	7
+#define IGC_FWSM_ULP_CFG_DONE		0x00000400  /* Low power cfg done */
+
+/* Shared Receive Address Registers */
+#define IGC_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
+#define IGC_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))
+
+#define IGC_H2ME		0x05B50    /* Host to ME */
+#define IGC_H2ME_ULP		0x00000800 /* ULP Indication Bit */
+#define IGC_H2ME_ENFORCE_SETTINGS	0x00001000 /* Enforce Settings */
+
+#define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_OFF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define IGC_ICH_NVM_SIG_WORD		0x13
+#define IGC_ICH_NVM_SIG_MASK		0xC000
+#define IGC_ICH_NVM_VALID_SIG_MASK	0xC0
+#define IGC_ICH_NVM_SIG_VALUE		0x80
+
+#define IGC_ICH8_LAN_INIT_TIMEOUT	1500
+
+/* FEXT register bit definition */
+#define IGC_FEXT_PHY_CABLE_DISCONNECTED	0x00000004
+
+#define IGC_FEXTNVM_SW_CONFIG		1
+#define IGC_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27) /* different on ICH8M */
+
+#define IGC_FEXTNVM3_PHY_CFG_COUNTER_MASK	0x0C000000
+#define IGC_FEXTNVM3_PHY_CFG_COUNTER_50MSEC	0x08000000
+
+#define IGC_FEXTNVM4_BEACON_DURATION_MASK	0x7
+#define IGC_FEXTNVM4_BEACON_DURATION_8USEC	0x7
+#define IGC_FEXTNVM4_BEACON_DURATION_16USEC	0x3
+
+#define IGC_FEXTNVM6_REQ_PLL_CLK	0x00000100
+#define IGC_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
+#define IGC_FEXTNVM6_K1_OFF_ENABLE	0x80000000
+/* bit for disabling packet buffer read */
+#define IGC_FEXTNVM7_DISABLE_PB_READ	0x00040000
+#define IGC_FEXTNVM7_SIDE_CLK_UNGATE	0x00000004
+#define IGC_FEXTNVM7_DISABLE_SMB_PERST	0x00000020
+#define IGC_FEXTNVM9_IOSFSB_CLKGATE_DIS	0x00000800
+#define IGC_FEXTNVM9_IOSFSB_CLKREQ_DIS	0x00001000
+#define IGC_FEXTNVM11_DISABLE_PB_READ		0x00000200
+#define IGC_FEXTNVM11_DISABLE_MULR_FIX	0x00002000
+
+/* bit24: RXDCTL thresholds granularity: 0 - cache lines, 1 - descriptors */
+#define IGC_RXDCTL_THRESH_UNIT_DESC	0x01000000
+
+#define NVM_SIZE_MULTIPLIER 4096  /*multiplier for NVMS field*/
+#define IGC_FLASH_BASE_ADDR 0xE000 /*offset of NVM access regs*/
+#define IGC_CTRL_EXT_NVMVS 0x3 /*NVM valid sector */
+#define IGC_TARC0_CB_MULTIQ_3_REQ	0x30000000
+#define IGC_TARC0_CB_MULTIQ_2_REQ	0x20000000
+#define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
+
+#define IGC_ICH_RAR_ENTRIES	7
+#define IGC_PCH2_RAR_ENTRIES	5 /* RAR[0], SHRA[0-3] */
+#define IGC_PCH_LPT_RAR_ENTRIES	12 /* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT		5
+#define PHY_REG(page, reg)	(((page) << PHY_PAGE_SHIFT) | \
+				 ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG	PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL	PHY_REG(776, 18) /* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS		0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK	0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN		0x0200
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG		PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL			PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC			PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC			PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS			PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)		(BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)		(BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)		(BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i)		(BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)		(BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE		0x0001 /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE		0x0002 /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT	3      /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK		(3 << 3) /* Multicast Offset Mask */
+#define BM_RCTL_BAM		0x0020 /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF		0x0040 /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE		0x0080 /* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
+#define HV_MUX_DATA_CTRL	PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC	0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED	0x0004
+#define HV_STATS_PAGE	778
+/* Half-duplex collision counts */
+#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16) /* Single Collision */
+#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. */
+#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20) /* Multiple Collision */
+#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25) /* Collision */
+#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
+#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29) /* Tx with no CRS */
+#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)
+
+#define IGC_FCRTV_PCH	0x05F40 /* PCH Flow Control Refresh Timer Value */
+
+#define IGC_NVM_K1_CONFIG	0x1B /* NVM K1 Config Word */
+#define IGC_NVM_K1_ENABLE	0x1  /* NVM Enable K1 bit */
+#define K1_ENTRY_LATENCY	0
+#define K1_MIN_TIME		1
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL		PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS	0x0001
+
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1		PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START		0x0001 /* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND		0x0004 /* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP	0x0010 /* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT	0x0020 /* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST	0x0040 /* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS	0x0100 /* Reset to SMBus mode */
+/* enable ULP even if when phy powered down via lanphypc */
+#define I218_ULP_CONFIG1_EN_ULP_LANPHYPC	0x0400
+/* disable clear of sticky ULP on PERST */
+#define I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST	0x0800
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST	0x1000 /* Disable on PERST# */
+
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR		PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK	0x007F
+#define HV_SMB_ADDR_PEC_EN	0x0200
+#define HV_SMB_ADDR_VALID	0x0080
+#define HV_SMB_ADDR_FREQ_MASK		0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT	8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT	12
+
+/* Strapping Option Register - RO */
+#define IGC_STRAP			0x0000C
+#define IGC_STRAP_SMBUS_ADDRESS_MASK	0x00FE0000
+#define IGC_STRAP_SMBUS_ADDRESS_SHIFT	17
+#define IGC_STRAP_SMT_FREQ_MASK	0x00003000
+#define IGC_STRAP_SMT_FREQ_SHIFT	12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS		PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU	0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS	0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN	0x0400 /* Restart Auto-negotiation */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL	PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW	0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA			PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK	0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT	12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+#define HV_PM_CTRL_K1_CLK_REQ		0x200
+#define HV_PM_CTRL_K1_ENABLE		0x4000
+
+#define I217_PLL_CLOCK_GATE_REG	PHY_REG(772, 28)
+#define I217_PLL_CLOCK_GATE_MASK	0x07FF
+
+#define SW_FLAG_TIMEOUT		1000 /* SW Semaphore flag timeout in ms */
+
+/* Inband Control */
+#define I217_INBAND_CTRL				PHY_REG(770, 18)
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
+
+/* Low Power Idle GPIO Control */
+#define I217_LPI_GPIO_CTRL			PHY_REG(772, 18)
+#define I217_LPI_GPIO_CTRL_AUTO_EN_LPI		0x0800
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE		0x2000
+#define I82579_LPI_CTRL_1000_ENABLE		0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+
+/* 82579 DFT Control */
+#define I82579_DFT_CTRL			PHY_REG(769, 20)
+#define I82579_DFT_CTRL_GATE_PHY_RESET	0x0040 /* Gate PHY Reset on MAC Reset */
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR		0x10
+#define I82579_EMI_DATA		0x11
+#define I82579_LPI_UPDATE_TIMER	0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD	0x084F /* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD	0x0887 /* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN	0x2411 /* MSE count before dropping link */
+#define I82579_RX_CONFIG		0x3412 /* Receive configuration */
+#define I82579_LPI_PLL_SHUT		0x4412 /* LPI PLL Shut Enable */
+#define I82579_EEE_PCS_STATUS		0x182E	/* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY		0x0410 /* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT	0x040E /* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY		0x040F /* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED	(1 << 1) /* 100BaseTx EEE */
+#define I82579_EEE_1000_SUPPORTED	(1 << 2) /* 1000BaseTx EEE */
+#define I82579_LPI_100_PLL_SHUT	(1 << 2) /* 100M LPI PLL Shut Enabled */
+#define I217_EEE_PCS_STATUS	0x9401   /* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY	0x8000   /* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT	0x8001   /* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY	0x8002   /* IEEE MMD Register 7.61 */
+#define I217_RX_CONFIG		0xB20C /* Receive configuration */
+
+#define IGC_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */
+#define IGC_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL		BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE	0x0080
+#define I217_CGFREG			PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET	0x0002
+#define I217_MEMPWR			PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010
+
+/* Receive Address Initial CRC Calculation */
+#define IGC_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))
+
+#define IGC_PCI_VENDOR_ID_REGISTER	0x00
+
+#define IGC_PCI_REVISION_ID_REG	0x08
+void igc_set_kmrn_lock_loss_workaround_ich8lan(struct igc_hw *hw,
+						 bool state);
+void igc_igp3_phy_powerdown_workaround_ich8lan(struct igc_hw *hw);
+void igc_gig_downshift_workaround_ich8lan(struct igc_hw *hw);
+void igc_suspend_workarounds_ich8lan(struct igc_hw *hw);
+u32 igc_resume_workarounds_pchlan(struct igc_hw *hw);
+s32 igc_configure_k1_ich8lan(struct igc_hw *hw, bool k1_enable);
+s32 igc_configure_k0s_lpt(struct igc_hw *hw, u8 entry_latency, u8 min_time);
+void igc_copy_rx_addrs_to_phy_ich8lan(struct igc_hw *hw);
+s32 igc_lv_jumbo_workaround_ich8lan(struct igc_hw *hw, bool enable);
+s32 igc_read_emi_reg_locked(struct igc_hw *hw, u16 addr, u16 *data);
+s32 igc_write_emi_reg_locked(struct igc_hw *hw, u16 addr, u16 data);
+s32 igc_set_eee_pchlan(struct igc_hw *hw);
+s32 igc_enable_ulp_lpt_lp(struct igc_hw *hw, bool to_sx);
+s32 igc_disable_ulp_lpt_lp(struct igc_hw *hw, bool force);
+#endif /* _IGC_ICH8LAN_H_ */
+void igc_demote_ltr(struct igc_hw *hw, bool demote, bool link);
diff --git a/drivers/net/igc/base/igc_mac.c b/drivers/net/igc/base/igc_mac.c
new file mode 100644
index 0000000..e64415f
--- /dev/null
+++ b/drivers/net/igc/base/igc_mac.c
@@ -0,0 +1,2100 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+
+static s32 igc_validate_mdi_setting_generic(struct igc_hw *hw);
+static void igc_set_lan_id_multi_port_pcie(struct igc_hw *hw);
+static void igc_config_collision_dist_generic(struct igc_hw *hw);
+static int igc_rar_set_generic(struct igc_hw *hw, u8 *addr, u32 index);
+
+/**
+ *  igc_init_mac_ops_generic - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void igc_init_mac_ops_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	DEBUGFUNC("igc_init_mac_ops_generic");
+
+	/* General Setup */
+	mac->ops.init_params = igc_null_ops_generic;
+	mac->ops.init_hw = igc_null_ops_generic;
+	mac->ops.reset_hw = igc_null_ops_generic;
+	mac->ops.setup_physical_interface = igc_null_ops_generic;
+	mac->ops.get_bus_info = igc_null_ops_generic;
+	mac->ops.set_lan_id = igc_set_lan_id_multi_port_pcie;
+	mac->ops.read_mac_addr = igc_read_mac_addr_generic;
+	mac->ops.config_collision_dist = igc_config_collision_dist_generic;
+	mac->ops.clear_hw_cntrs = igc_null_mac_generic;
+	/* LED */
+	mac->ops.cleanup_led = igc_null_ops_generic;
+	mac->ops.setup_led = igc_null_ops_generic;
+	mac->ops.blink_led = igc_null_ops_generic;
+	mac->ops.led_on = igc_null_ops_generic;
+	mac->ops.led_off = igc_null_ops_generic;
+	/* LINK */
+	mac->ops.setup_link = igc_null_ops_generic;
+	mac->ops.get_link_up_info = igc_null_link_info;
+	mac->ops.check_for_link = igc_null_ops_generic;
+	/* Management */
+	mac->ops.check_mng_mode = igc_null_mng_mode;
+	/* VLAN, MC, etc. */
+	mac->ops.update_mc_addr_list = igc_null_update_mc;
+	mac->ops.clear_vfta = igc_null_mac_generic;
+	mac->ops.write_vfta = igc_null_write_vfta;
+	mac->ops.rar_set = igc_rar_set_generic;
+	mac->ops.validate_mdi_setting = igc_validate_mdi_setting_generic;
+}
+
+/**
+ *  igc_null_ops_generic - No-op function, returns 0
+ *  @hw: pointer to the HW structure
+ **/
+s32 igc_null_ops_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_null_ops_generic");
+	UNREFERENCED_1PARAMETER(hw);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_mac_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void igc_null_mac_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_null_mac_generic");
+	UNREFERENCED_1PARAMETER(hw);
+}
+
+/**
+ *  igc_null_link_info - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @s: dummy variable
+ *  @d: dummy variable
+ **/
+s32 igc_null_link_info(struct igc_hw IGC_UNUSEDARG * hw,
+			 u16 IGC_UNUSEDARG * s, u16 IGC_UNUSEDARG * d)
+{
+	DEBUGFUNC("igc_null_link_info");
+	UNREFERENCED_3PARAMETER(hw, s, d);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_mng_mode - No-op function, return false
+ *  @hw: pointer to the HW structure
+ **/
+bool igc_null_mng_mode(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_null_mng_mode");
+	UNREFERENCED_1PARAMETER(hw);
+	return false;
+}
+
+/**
+ *  igc_null_update_mc - No-op function, return void
+ *  @hw: pointer to the HW structure
+ *  @h: dummy variable
+ *  @a: dummy variable
+ **/
+void igc_null_update_mc(struct igc_hw IGC_UNUSEDARG * hw,
+			  u8 IGC_UNUSEDARG * h, u32 IGC_UNUSEDARG a)
+{
+	DEBUGFUNC("igc_null_update_mc");
+	UNREFERENCED_3PARAMETER(hw, h, a);
+}
+
+/**
+ *  igc_null_write_vfta - No-op function, return void
+ *  @hw: pointer to the HW structure
+ *  @a: dummy variable
+ *  @b: dummy variable
+ **/
+void igc_null_write_vfta(struct igc_hw IGC_UNUSEDARG * hw,
+			   u32 IGC_UNUSEDARG a, u32 IGC_UNUSEDARG b)
+{
+	DEBUGFUNC("igc_null_write_vfta");
+	UNREFERENCED_3PARAMETER(hw, a, b);
+}
+
+/**
+ *  igc_null_rar_set - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @h: dummy variable
+ *  @a: dummy variable
+ **/
+int igc_null_rar_set(struct igc_hw IGC_UNUSEDARG * hw,
+			u8 IGC_UNUSEDARG * h, u32 IGC_UNUSEDARG a)
+{
+	DEBUGFUNC("igc_null_rar_set");
+	UNREFERENCED_3PARAMETER(hw, h, a);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_bus_info_pci_generic - Get PCI(x) bus information
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines and stores the system bus information for a particular
+ *  network interface.  The following bus information is determined and stored:
+ *  bus speed, bus width, type (PCI/PCIx), and PCI(-x) function.
+ **/
+s32 igc_get_bus_info_pci_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	struct igc_bus_info *bus = &hw->bus;
+	u32 status = IGC_READ_REG(hw, IGC_STATUS);
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_get_bus_info_pci_generic");
+
+	/* PCI or PCI-X? */
+	bus->type = (status & IGC_STATUS_PCIX_MODE)
+			? igc_bus_type_pcix
+			: igc_bus_type_pci;
+
+	/* Bus speed */
+	if (bus->type == igc_bus_type_pci) {
+		bus->speed = (status & IGC_STATUS_PCI66)
+			     ? igc_bus_speed_66
+			     : igc_bus_speed_33;
+	} else {
+		switch (status & IGC_STATUS_PCIX_SPEED) {
+		case IGC_STATUS_PCIX_SPEED_66:
+			bus->speed = igc_bus_speed_66;
+			break;
+		case IGC_STATUS_PCIX_SPEED_100:
+			bus->speed = igc_bus_speed_100;
+			break;
+		case IGC_STATUS_PCIX_SPEED_133:
+			bus->speed = igc_bus_speed_133;
+			break;
+		default:
+			bus->speed = igc_bus_speed_reserved;
+			break;
+		}
+	}
+
+	/* Bus width */
+	bus->width = (status & IGC_STATUS_BUS64)
+		     ? igc_bus_width_64
+		     : igc_bus_width_32;
+
+	/* Which PCI(-X) function? */
+	mac->ops.set_lan_id(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_bus_info_pcie_generic - Get PCIe bus information
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines and stores the system bus information for a particular
+ *  network interface.  The following bus information is determined and stored:
+ *  bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igc_get_bus_info_pcie_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	struct igc_bus_info *bus = &hw->bus;
+	s32 ret_val;
+	u16 pcie_link_status;
+
+	DEBUGFUNC("igc_get_bus_info_pcie_generic");
+
+	bus->type = igc_bus_type_pci_express;
+
+	ret_val = igc_read_pcie_cap_reg(hw, PCIE_LINK_STATUS,
+					  &pcie_link_status);
+	if (ret_val) {
+		bus->width = igc_bus_width_unknown;
+		bus->speed = igc_bus_speed_unknown;
+	} else {
+		switch (pcie_link_status & PCIE_LINK_SPEED_MASK) {
+		case PCIE_LINK_SPEED_2500:
+			bus->speed = igc_bus_speed_2500;
+			break;
+		case PCIE_LINK_SPEED_5000:
+			bus->speed = igc_bus_speed_5000;
+			break;
+		default:
+			bus->speed = igc_bus_speed_unknown;
+			break;
+		}
+
+		bus->width = (enum igc_bus_width)((pcie_link_status &
+			      PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT);
+	}
+
+	mac->ops.set_lan_id(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+static void igc_set_lan_id_multi_port_pcie(struct igc_hw *hw)
+{
+	struct igc_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	/* The status register reports the correct function number
+	 * for the device regardless of function swap state.
+	 */
+	reg = IGC_READ_REG(hw, IGC_STATUS);
+	bus->func = (reg & IGC_STATUS_FUNC_MASK) >> IGC_STATUS_FUNC_SHIFT;
+}
+
+/**
+ *  igc_set_lan_id_multi_port_pci - Set LAN id for PCI multiple port devices
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading PCI config space.
+ **/
+void igc_set_lan_id_multi_port_pci(struct igc_hw *hw)
+{
+	struct igc_bus_info *bus = &hw->bus;
+	u16 pci_header_type;
+	u32 status;
+
+	igc_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type);
+	if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
+		status = IGC_READ_REG(hw, IGC_STATUS);
+		bus->func = (status & IGC_STATUS_FUNC_MASK)
+			    >> IGC_STATUS_FUNC_SHIFT;
+	} else {
+		bus->func = 0;
+	}
+}
+
+/**
+ *  igc_set_lan_id_single_port - Set LAN id for a single port device
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the LAN function id to zero for a single port device.
+ **/
+void igc_set_lan_id_single_port(struct igc_hw *hw)
+{
+	struct igc_bus_info *bus = &hw->bus;
+
+	bus->func = 0;
+}
+
+/**
+ *  igc_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void igc_clear_vfta_generic(struct igc_hw *hw)
+{
+	u32 offset;
+
+	DEBUGFUNC("igc_clear_vfta_generic");
+
+	for (offset = 0; offset < IGC_VLAN_FILTER_TBL_SIZE; offset++) {
+		IGC_WRITE_REG_ARRAY(hw, IGC_VFTA, offset, 0);
+		IGC_WRITE_FLUSH(hw);
+	}
+}
+
+/**
+ *  igc_write_vfta_generic - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+void igc_write_vfta_generic(struct igc_hw *hw, u32 offset, u32 value)
+{
+	DEBUGFUNC("igc_write_vfta_generic");
+
+	IGC_WRITE_REG_ARRAY(hw, IGC_VFTA, offset, value);
+	IGC_WRITE_FLUSH(hw);
+}
+
+/**
+ *  igc_init_rx_addrs_generic - Initialize receive address's
+ *  @hw: pointer to the HW structure
+ *  @rar_count: receive address registers
+ *
+ *  Setup the receive address registers by setting the base receive address
+ *  register to the devices MAC address and clearing all the other receive
+ *  address registers to 0.
+ **/
+void igc_init_rx_addrs_generic(struct igc_hw *hw, u16 rar_count)
+{
+	u32 i;
+	u8 mac_addr[ETH_ADDR_LEN] = {0};
+
+	DEBUGFUNC("igc_init_rx_addrs_generic");
+
+	/* Setup the receive address */
+	DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+	/* Zero out the other (rar_entry_count - 1) receive addresses */
+	DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count - 1);
+	for (i = 1; i < rar_count; i++)
+		hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ *  igc_check_alt_mac_addr_generic - Check for alternate MAC addr
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the nvm for an alternate MAC address.  An alternate MAC address
+ *  can be setup by pre-boot software and must be treated like a permanent
+ *  address and must override the actual permanent MAC address. If an
+ *  alternate MAC address is found it is programmed into RAR0, replacing
+ *  the permanent address that was installed into RAR0 by the Si on reset.
+ *  This function will return SUCCESS unless it encounters an error while
+ *  reading the EEPROM.
+ **/
+s32 igc_check_alt_mac_addr_generic(struct igc_hw *hw)
+{
+	u32 i;
+	s32 ret_val;
+	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+	u8 alt_mac_addr[ETH_ADDR_LEN];
+
+	DEBUGFUNC("igc_check_alt_mac_addr_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data);
+	if (ret_val)
+		return ret_val;
+
+	/* not supported on older hardware or 82573 */
+	if (hw->mac.type < igc_82571 || hw->mac.type == igc_82573)
+		return IGC_SUCCESS;
+
+	/* Alternate MAC address is handled by the option ROM for 82580
+	 * and newer. SW support not required.
+	 */
+	if (hw->mac.type >= igc_82580)
+		return IGC_SUCCESS;
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+				   &nvm_alt_mac_addr_offset);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (nvm_alt_mac_addr_offset == 0xFFFF ||
+	    nvm_alt_mac_addr_offset == 0x0000)
+		/* There is no Alternate MAC Address */
+		return IGC_SUCCESS;
+
+	if (hw->bus.func == IGC_FUNC_1)
+		nvm_alt_mac_addr_offset += IGC_ALT_MAC_ADDRESS_OFFSET_LAN1;
+	if (hw->bus.func == IGC_FUNC_2)
+		nvm_alt_mac_addr_offset += IGC_ALT_MAC_ADDRESS_OFFSET_LAN2;
+
+	if (hw->bus.func == IGC_FUNC_3)
+		nvm_alt_mac_addr_offset += IGC_ALT_MAC_ADDRESS_OFFSET_LAN3;
+	for (i = 0; i < ETH_ADDR_LEN; i += 2) {
+		offset = nvm_alt_mac_addr_offset + (i >> 1);
+		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+
+		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+	}
+
+	/* if multicast bit is set, the alternate address will not be used */
+	if (alt_mac_addr[0] & 0x01) {
+		DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");
+		return IGC_SUCCESS;
+	}
+
+	/* We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_rar_set_generic - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.
+ **/
+static int igc_rar_set_generic(struct igc_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	DEBUGFUNC("igc_rar_set_generic");
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= IGC_RAH_AV;
+
+	/* Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
+	IGC_WRITE_REG(hw, IGC_RAL(index), rar_low);
+	IGC_WRITE_FLUSH(hw);
+	IGC_WRITE_REG(hw, IGC_RAH(index), rar_high);
+	IGC_WRITE_FLUSH(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_hash_mc_addr_generic - Generate a multicast hash value
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: pointer to a multicast address
+ *
+ *  Generates a multicast address hash value which is used to determine
+ *  the multicast filter table array address and new table value.
+ **/
+u32 igc_hash_mc_addr_generic(struct igc_hw *hw, u8 *mc_addr)
+{
+	u32 hash_value, hash_mask;
+	u8 bit_shift = 0;
+
+	DEBUGFUNC("igc_hash_mc_addr_generic");
+
+	/* Register count multiplied by bits per register */
+	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+	/* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+	 * where 0xFF would still fall within the hash mask.
+	 */
+	while (hash_mask >> bit_shift != 0xFF)
+		bit_shift++;
+
+	/* The portion of the address that is used for the hash table
+	 * is determined by the mc_filter_type setting.
+	 * The algorithm is such that there is a total of 8 bits of shifting.
+	 * The bit_shift for a mc_filter_type of 0 represents the number of
+	 * left-shifts where the MSB of mc_addr[5] would still fall within
+	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
+	 * of 8 bits of shifting, then mc_addr[4] will shift right the
+	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
+	 * cases are a variation of this algorithm...essentially raising the
+	 * number of bits to shift mc_addr[5] left, while still keeping the
+	 * 8-bit shifting total.
+	 *
+	 * For example, given the following Destination MAC Address and an
+	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+	 * we can see that the bit_shift for case 0 is 4.  These are the hash
+	 * values resulting from each mc_filter_type...
+	 * [0] [1] [2] [3] [4] [5]
+	 * 01  AA  00  12  34  56
+	 * LSB		 MSB
+	 *
+	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+	 */
+	switch (hw->mac.mc_filter_type) {
+	default:
+	case 0:
+		break;
+	case 1:
+		bit_shift += 1;
+		break;
+	case 2:
+		bit_shift += 2;
+		break;
+	case 3:
+		bit_shift += 4;
+		break;
+	}
+
+	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+				  (((u16)mc_addr[5]) << bit_shift)));
+
+	return hash_value;
+}
+
+/**
+ *  igc_update_mc_addr_list_generic - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates entire Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igc_update_mc_addr_list_generic(struct igc_hw *hw,
+				       u8 *mc_addr_list, u32 mc_addr_count)
+{
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
+
+	DEBUGFUNC("igc_update_mc_addr_list_generic");
+
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32)i < mc_addr_count; i++) {
+		hash_value = igc_hash_mc_addr_generic(hw, mc_addr_list);
+
+		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+		hash_bit = hash_value & 0x1F;
+
+		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+		mc_addr_list += (ETH_ADDR_LEN);
+	}
+
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		IGC_WRITE_REG_ARRAY(hw, IGC_MTA, i, hw->mac.mta_shadow[i]);
+	IGC_WRITE_FLUSH(hw);
+}
+
+/**
+ *  igc_pcix_mmrbc_workaround_generic - Fix incorrect MMRBC value
+ *  @hw: pointer to the HW structure
+ *
+ *  In certain situations, a system BIOS may report that the PCIx maximum
+ *  memory read byte count (MMRBC) value is higher than than the actual
+ *  value. We check the PCIx command register with the current PCIx status
+ *  register.
+ **/
+void igc_pcix_mmrbc_workaround_generic(struct igc_hw *hw)
+{
+	u16 cmd_mmrbc;
+	u16 pcix_cmd;
+	u16 pcix_stat_hi_word;
+	u16 stat_mmrbc;
+
+	DEBUGFUNC("igc_pcix_mmrbc_workaround_generic");
+
+	/* Workaround for PCI-X issue when BIOS sets MMRBC incorrectly */
+	if (hw->bus.type != igc_bus_type_pcix)
+		return;
+
+	igc_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd);
+	igc_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI, &pcix_stat_hi_word);
+	cmd_mmrbc = (pcix_cmd & PCIX_COMMAND_MMRBC_MASK) >>
+		     PCIX_COMMAND_MMRBC_SHIFT;
+	stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
+		      PCIX_STATUS_HI_MMRBC_SHIFT;
+	if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
+		stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
+	if (cmd_mmrbc > stat_mmrbc) {
+		pcix_cmd &= ~PCIX_COMMAND_MMRBC_MASK;
+		pcix_cmd |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
+		igc_write_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd);
+	}
+}
+
+/**
+ *  igc_clear_hw_cntrs_base_generic - Clear base hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the base hardware counters by reading the counter registers.
+ **/
+void igc_clear_hw_cntrs_base_generic(struct igc_hw *hw)
+{
+	DEBUGFUNC("igc_clear_hw_cntrs_base_generic");
+
+	IGC_READ_REG(hw, IGC_CRCERRS);
+	IGC_READ_REG(hw, IGC_SYMERRS);
+	IGC_READ_REG(hw, IGC_MPC);
+	IGC_READ_REG(hw, IGC_SCC);
+	IGC_READ_REG(hw, IGC_ECOL);
+	IGC_READ_REG(hw, IGC_MCC);
+	IGC_READ_REG(hw, IGC_LATECOL);
+	IGC_READ_REG(hw, IGC_COLC);
+	IGC_READ_REG(hw, IGC_DC);
+	IGC_READ_REG(hw, IGC_SEC);
+	IGC_READ_REG(hw, IGC_RLEC);
+	IGC_READ_REG(hw, IGC_XONRXC);
+	IGC_READ_REG(hw, IGC_XONTXC);
+	IGC_READ_REG(hw, IGC_XOFFRXC);
+	IGC_READ_REG(hw, IGC_XOFFTXC);
+	IGC_READ_REG(hw, IGC_FCRUC);
+	IGC_READ_REG(hw, IGC_GPRC);
+	IGC_READ_REG(hw, IGC_BPRC);
+	IGC_READ_REG(hw, IGC_MPRC);
+	IGC_READ_REG(hw, IGC_GPTC);
+	IGC_READ_REG(hw, IGC_GORCL);
+	IGC_READ_REG(hw, IGC_GORCH);
+	IGC_READ_REG(hw, IGC_GOTCL);
+	IGC_READ_REG(hw, IGC_GOTCH);
+	IGC_READ_REG(hw, IGC_RNBC);
+	IGC_READ_REG(hw, IGC_RUC);
+	IGC_READ_REG(hw, IGC_RFC);
+	IGC_READ_REG(hw, IGC_ROC);
+	IGC_READ_REG(hw, IGC_RJC);
+	IGC_READ_REG(hw, IGC_TORL);
+	IGC_READ_REG(hw, IGC_TORH);
+	IGC_READ_REG(hw, IGC_TOTL);
+	IGC_READ_REG(hw, IGC_TOTH);
+	IGC_READ_REG(hw, IGC_TPR);
+	IGC_READ_REG(hw, IGC_TPT);
+	IGC_READ_REG(hw, IGC_MPTC);
+	IGC_READ_REG(hw, IGC_BPTC);
+}
+
+/**
+ *  igc_check_for_copper_link_generic - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+s32 igc_check_for_copper_link_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	DEBUGFUNC("igc_check_for_copper_link");
+
+	/* We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status)
+		return IGC_SUCCESS;
+
+	/* First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link)
+		return IGC_SUCCESS; /* No link detected */
+
+	mac->get_link_status = false;
+
+	/* Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	igc_check_downshift_generic(hw);
+
+	/* If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		return -IGC_ERR_CONFIG;
+
+	/* Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+
+	/* Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = igc_config_fc_after_link_up_generic(hw);
+	if (ret_val)
+		DEBUGOUT("Error configuring flow control\n");
+
+	return ret_val;
+}
+
+/**
+ *  igc_check_for_fiber_link_generic - Check for link (Fiber)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 igc_check_for_fiber_link_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	DEBUGFUNC("igc_check_for_fiber_link_generic");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	status = IGC_READ_REG(hw, IGC_STATUS);
+	rxcw = IGC_READ_REG(hw, IGC_RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), the cable is plugged in (we have signal),
+	 * and our link partner is not trying to auto-negotiate with us (we
+	 * are receiving idles or data), we need to force link up. We also
+	 * need to give auto-negotiation time to complete, in case the cable
+	 * was just plugged in. The autoneg_failed flag does this.
+	 */
+	/* (ctrl & IGC_CTRL_SWDPIN1) == 1 == have signal */
+	if ((ctrl & IGC_CTRL_SWDPIN1) && !(status & IGC_STATUS_LU) &&
+	    !(rxcw & IGC_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return IGC_SUCCESS;
+		}
+		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		IGC_WRITE_REG(hw, IGC_TXCW, (mac->txcw & ~IGC_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = IGC_READ_REG(hw, IGC_CTRL);
+		ctrl |= (IGC_CTRL_SLU | IGC_CTRL_FD);
+		IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = igc_config_fc_after_link_up_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & IGC_CTRL_SLU) && (rxcw & IGC_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		IGC_WRITE_REG(hw, IGC_TXCW, mac->txcw);
+		IGC_WRITE_REG(hw, IGC_CTRL, (ctrl & ~IGC_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_check_for_serdes_link_generic - Check for link (Serdes)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 igc_check_for_serdes_link_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	DEBUGFUNC("igc_check_for_serdes_link_generic");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	status = IGC_READ_REG(hw, IGC_STATUS);
+	rxcw = IGC_READ_REG(hw, IGC_RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), and our link partner is not trying to
+	 * auto-negotiate with us (we are receiving idles or data),
+	 * we need to force link up. We also need to give auto-negotiation
+	 * time to complete.
+	 */
+	/* (ctrl & IGC_CTRL_SWDPIN1) == 1 == have signal */
+	if (!(status & IGC_STATUS_LU) && !(rxcw & IGC_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return IGC_SUCCESS;
+		}
+		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		IGC_WRITE_REG(hw, IGC_TXCW, (mac->txcw & ~IGC_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = IGC_READ_REG(hw, IGC_CTRL);
+		ctrl |= (IGC_CTRL_SLU | IGC_CTRL_FD);
+		IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = igc_config_fc_after_link_up_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & IGC_CTRL_SLU) && (rxcw & IGC_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		IGC_WRITE_REG(hw, IGC_TXCW, mac->txcw);
+		IGC_WRITE_REG(hw, IGC_CTRL, (ctrl & ~IGC_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	} else if (!(IGC_TXCW_ANE & IGC_READ_REG(hw, IGC_TXCW))) {
+		/* If we force link for non-auto-negotiation switch, check
+		 * link status based on MAC synchronization for internal
+		 * serdes media type.
+		 */
+		/* SYNCH bit and IV bit are sticky. */
+		usec_delay(10);
+		rxcw = IGC_READ_REG(hw, IGC_RXCW);
+		if (rxcw & IGC_RXCW_SYNCH) {
+			if (!(rxcw & IGC_RXCW_IV)) {
+				mac->serdes_has_link = true;
+				DEBUGOUT("SERDES: Link up - forced.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - force failed.\n");
+		}
+	}
+
+	if (IGC_TXCW_ANE & IGC_READ_REG(hw, IGC_TXCW)) {
+		status = IGC_READ_REG(hw, IGC_STATUS);
+		if (status & IGC_STATUS_LU) {
+			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
+			usec_delay(10);
+			rxcw = IGC_READ_REG(hw, IGC_RXCW);
+			if (rxcw & IGC_RXCW_SYNCH) {
+				if (!(rxcw & IGC_RXCW_IV)) {
+					mac->serdes_has_link = true;
+					DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");
+				} else {
+					mac->serdes_has_link = false;
+					DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");
+				}
+			} else {
+				mac->serdes_has_link = false;
+				DEBUGOUT("SERDES: Link down - no sync.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			DEBUGOUT("SERDES: Link down - autoneg failed\n");
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_default_fc_generic - Set flow control default values
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the EEPROM for the default values for flow control and store the
+ *  values.
+ **/
+s32 igc_set_default_fc_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 nvm_offset = 0;
+
+	DEBUGFUNC("igc_set_default_fc_generic");
+
+	/* Read and store word 0x0F of the EEPROM. This word contains bits
+	 * that determine the hardware's default PAUSE (flow control) mode,
+	 * a bit that determines whether the HW defaults to enabling or
+	 * disabling auto-negotiation, and the direction of the
+	 * SW defined pins. If there is no SW over-ride of the flow
+	 * control setting, then the variable hw->fc will
+	 * be initialized based on a value in the EEPROM.
+	 */
+	if (hw->mac.type == igc_i350) {
+		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func);
+		ret_val = hw->nvm.ops.read(hw,
+					   NVM_INIT_CONTROL2_REG +
+					   nvm_offset,
+					   1, &nvm_data);
+	} else {
+		ret_val = hw->nvm.ops.read(hw,
+					   NVM_INIT_CONTROL2_REG,
+					   1, &nvm_data);
+	}
+
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
+		hw->fc.requested_mode = igc_fc_none;
+	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+		 NVM_WORD0F_ASM_DIR)
+		hw->fc.requested_mode = igc_fc_tx_pause;
+	else
+		hw->fc.requested_mode = igc_fc_full;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_setup_link_generic - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+s32 igc_setup_link_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_setup_link_generic");
+
+	/* In the case of the phy reset being blocked, we already have a link.
+	 * We do not need to set it up again.
+	 */
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
+		return IGC_SUCCESS;
+
+	/* If requested flow control is set to default, set flow control
+	 * based on the EEPROM flow control settings.
+	 */
+	if (hw->fc.requested_mode == igc_fc_default)
+		hw->fc.requested_mode = igc_fc_full;
+
+	/* Save off the requested flow control mode for use later.  Depending
+	 * on the link partner's capabilities, we may or may not use this mode.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+
+	DEBUGOUT1("After fix-ups FlowControl is now = %x\n",
+		hw->fc.current_mode);
+
+	/* Call the necessary media_type subroutine to configure the link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Initialize the flow control address, type, and PAUSE timer
+	 * registers to their default values.  This is done even if flow
+	 * control is disabled, because it does not hurt anything to
+	 * initialize these registers.
+	 */
+	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
+	IGC_WRITE_REG(hw, IGC_FCT, FLOW_CONTROL_TYPE);
+	IGC_WRITE_REG(hw, IGC_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+	IGC_WRITE_REG(hw, IGC_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+	IGC_WRITE_REG(hw, IGC_FCTTV, hw->fc.pause_time);
+
+	return igc_set_fc_watermarks_generic(hw);
+}
+
+/**
+ *  igc_commit_fc_settings_generic - Configure flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  Write the flow control settings to the Transmit Config Word Register (TXCW)
+ *  base on the flow control settings in igc_mac_info.
+ **/
+s32 igc_commit_fc_settings_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	u32 txcw;
+
+	DEBUGFUNC("igc_commit_fc_settings_generic");
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the device accordingly.  If auto-negotiation is enabled, then
+	 * software will have to set the "PAUSE" bits to the correct value in
+	 * the Transmit Config Word Register (TXCW) and re-start auto-
+	 * negotiation.  However, if auto-negotiation is disabled, then
+	 * software will have to manually configure the two flow control enable
+	 * bits in the CTRL register.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames,
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames but we
+	 *          do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 */
+	switch (hw->fc.current_mode) {
+	case igc_fc_none:
+		/* Flow control completely disabled by a software over-ride. */
+		txcw = (IGC_TXCW_ANE | IGC_TXCW_FD);
+		break;
+	case igc_fc_rx_pause:
+		/* Rx Flow control is enabled and Tx Flow control is disabled
+		 * by a software over-ride. Since there really isn't a way to
+		 * advertise that we are capable of Rx Pause ONLY, we will
+		 * advertise that we support both symmetric and asymmetric Rx
+		 * PAUSE.  Later, we will disable the adapter's ability to send
+		 * PAUSE frames.
+		 */
+		txcw = (IGC_TXCW_ANE | IGC_TXCW_FD | IGC_TXCW_PAUSE_MASK);
+		break;
+	case igc_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is disabled,
+		 * by a software over-ride.
+		 */
+		txcw = (IGC_TXCW_ANE | IGC_TXCW_FD | IGC_TXCW_ASM_DIR);
+		break;
+	case igc_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		txcw = (IGC_TXCW_ANE | IGC_TXCW_FD | IGC_TXCW_PAUSE_MASK);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	IGC_WRITE_REG(hw, IGC_TXCW, txcw);
+	mac->txcw = txcw;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_poll_fiber_serdes_link_generic - Poll for link up
+ *  @hw: pointer to the HW structure
+ *
+ *  Polls for link up by reading the status register, if link fails to come
+ *  up with auto-negotiation, then the link is forced if a signal is detected.
+ **/
+s32 igc_poll_fiber_serdes_link_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	u32 i, status;
+	s32 ret_val;
+
+	DEBUGFUNC("igc_poll_fiber_serdes_link_generic");
+
+	/* If we have a signal (the cable is plugged in, or assumed true for
+	 * serdes media) then poll for a "Link-Up" indication in the Device
+	 * Status Register.  Time-out if a link isn't seen in 500 milliseconds
+	 * seconds (Auto-negotiation should complete in less than 500
+	 * milliseconds even if the other end is doing it in SW).
+	 */
+	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
+		msec_delay(10);
+		status = IGC_READ_REG(hw, IGC_STATUS);
+		if (status & IGC_STATUS_LU)
+			break;
+	}
+	if (i == FIBER_LINK_UP_LIMIT) {
+		DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+		mac->autoneg_failed = true;
+		/* AutoNeg failed to achieve a link, so we'll call
+		 * mac->check_for_link. This routine will force the
+		 * link up if we detect a signal. This will allow us to
+		 * communicate with non-autonegotiating link partners.
+		 */
+		ret_val = mac->ops.check_for_link(hw);
+		if (ret_val) {
+			DEBUGOUT("Error while checking for link\n");
+			return ret_val;
+		}
+		mac->autoneg_failed = false;
+	} else {
+		mac->autoneg_failed = false;
+		DEBUGOUT("Valid Link Found\n");
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_setup_fiber_serdes_link_generic - Setup link for fiber/serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures collision distance and flow control for fiber and serdes
+ *  links.  Upon successful setup, poll for link.
+ **/
+s32 igc_setup_fiber_serdes_link_generic(struct igc_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	DEBUGFUNC("igc_setup_fiber_serdes_link_generic");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+
+	/* Take the link out of reset */
+	ctrl &= ~IGC_CTRL_LRST;
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	ret_val = igc_commit_fc_settings_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Since auto-negotiation is enabled, take the link out of reset (the
+	 * link will be in reset, because we previously reset the chip). This
+	 * will restart auto-negotiation.  If auto-negotiation is successful
+	 * then the link-up status bit will be set and the flow control enable
+	 * bits (RFCE and TFCE) will be set according to their negotiated value.
+	 */
+	DEBUGOUT("Auto-negotiation enabled\n");
+
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+	IGC_WRITE_FLUSH(hw);
+	msec_delay(1);
+
+	/* For these adapters, the SW definable pin 1 is set when the optics
+	 * detect a signal.  If we have a signal, then poll for a "Link-Up"
+	 * indication.
+	 */
+	if (hw->phy.media_type == igc_media_type_internal_serdes ||
+	    (IGC_READ_REG(hw, IGC_CTRL) & IGC_CTRL_SWDPIN1)) {
+		ret_val = igc_poll_fiber_serdes_link_generic(hw);
+	} else {
+		DEBUGOUT("No signal detected\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_config_collision_dist_generic - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+static void igc_config_collision_dist_generic(struct igc_hw *hw)
+{
+	u32 tctl;
+
+	DEBUGFUNC("igc_config_collision_dist_generic");
+
+	tctl = IGC_READ_REG(hw, IGC_TCTL);
+
+	tctl &= ~IGC_TCTL_COLD;
+	tctl |= IGC_COLLISION_DISTANCE << IGC_COLD_SHIFT;
+
+	IGC_WRITE_REG(hw, IGC_TCTL, tctl);
+	IGC_WRITE_FLUSH(hw);
+}
+
+/**
+ *  igc_set_fc_watermarks_generic - Set flow control high/low watermarks
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the flow control high/low threshold (watermark) registers.  If
+ *  flow control XON frame transmission is enabled, then set XON frame
+ *  transmission as well.
+ **/
+s32 igc_set_fc_watermarks_generic(struct igc_hw *hw)
+{
+	u32 fcrtl = 0, fcrth = 0;
+
+	DEBUGFUNC("igc_set_fc_watermarks_generic");
+
+	/* Set the flow control receive threshold registers.  Normally,
+	 * these registers will be set to a default threshold that may be
+	 * adjusted later by the driver's runtime code.  However, if the
+	 * ability to transmit pause frames is not enabled, then these
+	 * registers will be set to 0.
+	 */
+	if (hw->fc.current_mode & igc_fc_tx_pause) {
+		/* We need to set up the Receive Threshold high and low water
+		 * marks as well as (optionally) enabling the transmission of
+		 * XON frames.
+		 */
+		fcrtl = hw->fc.low_water;
+		if (hw->fc.send_xon)
+			fcrtl |= IGC_FCRTL_XONE;
+
+		fcrth = hw->fc.high_water;
+	}
+	IGC_WRITE_REG(hw, IGC_FCRTL, fcrtl);
+	IGC_WRITE_REG(hw, IGC_FCRTH, fcrth);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_force_mac_fc_generic - Force the MAC's flow control settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
+ *  device control register to reflect the adapter settings.  TFCE and RFCE
+ *  need to be explicitly set by software when a copper PHY is used because
+ *  autonegotiation is managed by the PHY rather than the MAC.  Software must
+ *  also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igc_force_mac_fc_generic(struct igc_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("igc_force_mac_fc_generic");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+
+	/* Because we didn't get link via the internal auto-negotiation
+	 * mechanism (we either forced link or we got link via PHY
+	 * auto-neg), we have to manually enable/disable transmit an
+	 * receive flow control.
+	 *
+	 * The "Case" statement below enables/disable flow control
+	 * according to the "hw->fc.current_mode" parameter.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause
+	 *          frames but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          frames but we do not receive pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
+	 *  other:  No other values should be possible at this point.
+	 */
+	DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+	switch (hw->fc.current_mode) {
+	case igc_fc_none:
+		ctrl &= (~(IGC_CTRL_TFCE | IGC_CTRL_RFCE));
+		break;
+	case igc_fc_rx_pause:
+		ctrl &= (~IGC_CTRL_TFCE);
+		ctrl |= IGC_CTRL_RFCE;
+		break;
+	case igc_fc_tx_pause:
+		ctrl &= (~IGC_CTRL_RFCE);
+		ctrl |= IGC_CTRL_TFCE;
+		break;
+	case igc_fc_full:
+		ctrl |= (IGC_CTRL_TFCE | IGC_CTRL_RFCE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_config_fc_after_link_up_generic - Configures flow control after link
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the status of auto-negotiation after link up to ensure that the
+ *  speed and duplex were not forced.  If the link needed to be forced, then
+ *  flow control needs to be forced also.  If auto-negotiation is enabled
+ *  and did not fail, then we configure flow control based on our link
+ *  partner.
+ **/
+s32 igc_config_fc_after_link_up_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val = IGC_SUCCESS;
+	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+	u16 speed, duplex;
+
+	DEBUGFUNC("igc_config_fc_after_link_up_generic");
+
+	/* Check for the case where we have fiber media and auto-neg failed
+	 * so we had to force link.  In this case, we need to force the
+	 * configuration of the MAC to match the "fc" parameter.
+	 */
+	if (mac->autoneg_failed) {
+		if (hw->phy.media_type == igc_media_type_copper)
+			ret_val = igc_force_mac_fc_generic(hw);
+	}
+
+	if (ret_val) {
+		DEBUGOUT("Error forcing flow control settings\n");
+		return ret_val;
+	}
+
+	/* Check for the case where we have copper media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if (hw->phy.media_type == igc_media_type_copper && mac->autoneg) {
+		/* Read the MII Status Register and check to see if AutoNeg
+		 * has completed.  We read this twice because this reg has
+		 * some "sticky" (latched) bits.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+			DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
+			return ret_val;
+		}
+
+		/* The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (Address 4) and the Auto_Negotiation Base
+		 * Page Ability Register (Address 5) to determine how
+		 * flow control was negotiated.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+					       &mii_nway_adv_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+					       &mii_nway_lp_ability_reg);
+		if (ret_val)
+			return ret_val;
+
+		/* Two bits in the Auto Negotiation Advertisement Register
+		 * (Address 4) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (Address 5) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | igc_fc_none
+		 *   0   |    1    |   0   |   DC    | igc_fc_none
+		 *   0   |    1    |   1   |    0    | igc_fc_none
+		 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | igc_fc_none
+		 *   1   |   DC    |   1   |   DC    | igc_fc_full
+		 *   1   |    1    |   0   |    0    | igc_fc_none
+		 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | IGC_fc_full
+		 *
+		 */
+		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+			/* Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise Rx
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == igc_fc_full) {
+				hw->fc.current_mode = igc_fc_full;
+				DEBUGOUT("Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = igc_fc_rx_pause;
+				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+			}
+		}
+		/* For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
+		 */
+		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = igc_fc_tx_pause;
+			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
+		}
+		/* For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
+		 */
+		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+			hw->fc.current_mode = igc_fc_rx_pause;
+			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
+		} else {
+			/* Per the IEEE spec, at this point flow control
+			 * should be disabled.
+			 */
+			hw->fc.current_mode = igc_fc_none;
+			DEBUGOUT("Flow Control = NONE.\n");
+		}
+
+		/* Now we need to do one last check...  If we auto-
+		 * negotiated to HALF DUPLEX, flow control should not be
+		 * enabled per IEEE 802.3 spec.
+		 */
+		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
+		if (ret_val) {
+			DEBUGOUT("Error getting link speed and duplex\n");
+			return ret_val;
+		}
+
+		if (duplex == HALF_DUPLEX)
+			hw->fc.current_mode = igc_fc_none;
+
+		/* Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		ret_val = igc_force_mac_fc_generic(hw);
+		if (ret_val) {
+			DEBUGOUT("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Read the status register for the current speed/duplex and store the current
+ *  speed and duplex for copper connections.
+ **/
+s32 igc_get_speed_and_duplex_copper_generic(struct igc_hw *hw, u16 *speed,
+					      u16 *duplex)
+{
+	u32 status;
+
+	DEBUGFUNC("igc_get_speed_and_duplex_copper_generic");
+
+	status = IGC_READ_REG(hw, IGC_STATUS);
+	if (status & IGC_STATUS_SPEED_1000) {
+		/* For I225, STATUS will indicate 1G speed in both 1 Gbps
+		 * and 2.5 Gbps link modes. An additional bit is used
+		 * to differentiate between 1 Gbps and 2.5 Gbps.
+		 */
+		if (hw->mac.type == igc_i225 &&
+		    (status & IGC_STATUS_SPEED_2500)) {
+			*speed = SPEED_2500;
+			DEBUGOUT("2500 Mbs, ");
+		} else {
+			*speed = SPEED_1000;
+			DEBUGOUT("1000 Mbs, ");
+		}
+	} else if (status & IGC_STATUS_SPEED_100) {
+		*speed = SPEED_100;
+		DEBUGOUT("100 Mbs, ");
+	} else {
+		*speed = SPEED_10;
+		DEBUGOUT("10 Mbs, ");
+	}
+
+	if (status & IGC_STATUS_FD) {
+		*duplex = FULL_DUPLEX;
+		DEBUGOUT("Full Duplex\n");
+	} else {
+		*duplex = HALF_DUPLEX;
+		DEBUGOUT("Half Duplex\n");
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Sets the speed and duplex to gigabit full duplex (the only possible option)
+ *  for fiber/serdes links.
+ **/
+s32
+igc_get_speed_and_duplex_fiber_serdes_generic(struct igc_hw *hw,
+				u16 *speed, u16 *duplex)
+{
+	DEBUGFUNC("igc_get_speed_and_duplex_fiber_serdes_generic");
+	UNREFERENCED_1PARAMETER(hw);
+
+	*speed = SPEED_1000;
+	*duplex = FULL_DUPLEX;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_hw_semaphore_generic - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igc_get_hw_semaphore_generic(struct igc_hw *hw)
+{
+	u32 swsm;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	DEBUGFUNC("igc_get_hw_semaphore_generic");
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = IGC_READ_REG(hw, IGC_SWSM);
+		if (!(swsm & IGC_SWSM_SMBI))
+			break;
+
+		usec_delay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+		return -IGC_ERR_NVM;
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = IGC_READ_REG(hw, IGC_SWSM);
+		IGC_WRITE_REG(hw, IGC_SWSM, swsm | IGC_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (IGC_READ_REG(hw, IGC_SWSM) & IGC_SWSM_SWESMBI)
+			break;
+
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		igc_put_hw_semaphore_generic(hw);
+		DEBUGOUT("Driver can't access the NVM\n");
+		return -IGC_ERR_NVM;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_put_hw_semaphore_generic - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ **/
+void igc_put_hw_semaphore_generic(struct igc_hw *hw)
+{
+	u32 swsm;
+
+	DEBUGFUNC("igc_put_hw_semaphore_generic");
+
+	swsm = IGC_READ_REG(hw, IGC_SWSM);
+
+	swsm &= ~(IGC_SWSM_SMBI | IGC_SWSM_SWESMBI);
+
+	IGC_WRITE_REG(hw, IGC_SWSM, swsm);
+}
+
+/**
+ *  igc_get_auto_rd_done_generic - Check for auto read completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check EEPROM for Auto Read done bit.
+ **/
+s32 igc_get_auto_rd_done_generic(struct igc_hw *hw)
+{
+	s32 i = 0;
+
+	DEBUGFUNC("igc_get_auto_rd_done_generic");
+
+	while (i < AUTO_READ_DONE_TIMEOUT) {
+		if (IGC_READ_REG(hw, IGC_EECD) & IGC_EECD_AUTO_RD)
+			break;
+		msec_delay(1);
+		i++;
+	}
+
+	if (i == AUTO_READ_DONE_TIMEOUT) {
+		DEBUGOUT("Auto read by HW from NVM has not completed.\n");
+		return -IGC_ERR_RESET;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_valid_led_default_generic - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 igc_valid_led_default_generic(struct igc_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_valid_led_default_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_id_led_init_generic -
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 igc_id_led_init_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_mask = 0x000000FF;
+	const u32 ledctl_on = IGC_LEDCTL_MODE_LED_ON;
+	const u32 ledctl_off = IGC_LEDCTL_MODE_LED_OFF;
+	u16 data, i, temp;
+	const u16 led_mask = 0x0F;
+
+	DEBUGFUNC("igc_id_led_init_generic");
+
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		return ret_val;
+
+	mac->ledctl_default = IGC_READ_REG(hw, IGC_LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & led_mask;
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 igc_setup_led_generic(struct igc_hw *hw)
+{
+	u32 ledctl;
+
+	DEBUGFUNC("igc_setup_led_generic");
+
+	if (hw->mac.ops.setup_led != igc_setup_led_generic)
+		return -IGC_ERR_CONFIG;
+
+	if (hw->phy.media_type == igc_media_type_fiber) {
+		ledctl = IGC_READ_REG(hw, IGC_LEDCTL);
+		hw->mac.ledctl_default = ledctl;
+		/* Turn off LED0 */
+		ledctl &= ~(IGC_LEDCTL_LED0_IVRT | IGC_LEDCTL_LED0_BLINK |
+			    IGC_LEDCTL_LED0_MODE_MASK);
+		ledctl |= (IGC_LEDCTL_MODE_LED_OFF <<
+			   IGC_LEDCTL_LED0_MODE_SHIFT);
+		IGC_WRITE_REG(hw, IGC_LEDCTL, ledctl);
+	} else if (hw->phy.media_type == igc_media_type_copper) {
+		IGC_WRITE_REG(hw, IGC_LEDCTL, hw->mac.ledctl_mode1);
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_cleanup_led_generic - Set LED config to default operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Remove the current LED configuration and set the LED configuration
+ *  to the default value, saved from the EEPROM.
+ **/
+s32 igc_cleanup_led_generic(struct igc_hw *hw)
+{
+	DEBUGFUNC("igc_cleanup_led_generic");
+
+	IGC_WRITE_REG(hw, IGC_LEDCTL, hw->mac.ledctl_default);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_blink_led_generic - Blink LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Blink the LEDs which are set to be on.
+ **/
+s32 igc_blink_led_generic(struct igc_hw *hw)
+{
+	u32 ledctl_blink = 0;
+	u32 i;
+
+	DEBUGFUNC("igc_blink_led_generic");
+
+	if (hw->phy.media_type == igc_media_type_fiber) {
+		/* always blink LED0 for PCI-E fiber */
+		ledctl_blink = IGC_LEDCTL_LED0_BLINK |
+		     (IGC_LEDCTL_MODE_LED_ON << IGC_LEDCTL_LED0_MODE_SHIFT);
+	} else {
+		/* Set the blink bit for each LED that's "on" (0x0E)
+		 * (or "off" if inverted) in ledctl_mode2.  The blink
+		 * logic in hardware only works when mode is set to "on"
+		 * so it must be changed accordingly when the mode is
+		 * "off" and inverted.
+		 */
+		ledctl_blink = hw->mac.ledctl_mode2;
+		for (i = 0; i < 32; i += 8) {
+			u32 mode = (hw->mac.ledctl_mode2 >> i) &
+			    IGC_LEDCTL_LED0_MODE_MASK;
+			u32 led_default = hw->mac.ledctl_default >> i;
+
+			if ((!(led_default & IGC_LEDCTL_LED0_IVRT) &&
+			     mode == IGC_LEDCTL_MODE_LED_ON) ||
+			    ((led_default & IGC_LEDCTL_LED0_IVRT) &&
+			     mode == IGC_LEDCTL_MODE_LED_OFF)) {
+				ledctl_blink &=
+				    ~(IGC_LEDCTL_LED0_MODE_MASK << i);
+				ledctl_blink |= (IGC_LEDCTL_LED0_BLINK |
+						 IGC_LEDCTL_MODE_LED_ON) << i;
+			}
+		}
+	}
+
+	IGC_WRITE_REG(hw, IGC_LEDCTL, ledctl_blink);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_led_on_generic - Turn LED on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED on.
+ **/
+s32 igc_led_on_generic(struct igc_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("igc_led_on_generic");
+
+	switch (hw->phy.media_type) {
+	case igc_media_type_fiber:
+		ctrl = IGC_READ_REG(hw, IGC_CTRL);
+		ctrl &= ~IGC_CTRL_SWDPIN0;
+		ctrl |= IGC_CTRL_SWDPIO0;
+		IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+		break;
+	case igc_media_type_copper:
+		IGC_WRITE_REG(hw, IGC_LEDCTL, hw->mac.ledctl_mode2);
+		break;
+	default:
+		break;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_led_off_generic - Turn LED off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED off.
+ **/
+s32 igc_led_off_generic(struct igc_hw *hw)
+{
+	u32 ctrl;
+
+	DEBUGFUNC("igc_led_off_generic");
+
+	switch (hw->phy.media_type) {
+	case igc_media_type_fiber:
+		ctrl = IGC_READ_REG(hw, IGC_CTRL);
+		ctrl |= IGC_CTRL_SWDPIN0;
+		ctrl |= IGC_CTRL_SWDPIO0;
+		IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+		break;
+	case igc_media_type_copper:
+		IGC_WRITE_REG(hw, IGC_LEDCTL, hw->mac.ledctl_mode1);
+		break;
+	default:
+		break;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_set_pcie_no_snoop_generic - Set PCI-express capabilities
+ *  @hw: pointer to the HW structure
+ *  @no_snoop: bitmap of snoop events
+ *
+ *  Set the PCI-express register to snoop for events enabled in 'no_snoop'.
+ **/
+void igc_set_pcie_no_snoop_generic(struct igc_hw *hw, u32 no_snoop)
+{
+	u32 gcr;
+
+	DEBUGFUNC("igc_set_pcie_no_snoop_generic");
+
+	if (hw->bus.type != igc_bus_type_pci_express)
+		return;
+
+	if (no_snoop) {
+		gcr = IGC_READ_REG(hw, IGC_GCR);
+		gcr &= ~(PCIE_NO_SNOOP_ALL);
+		gcr |= no_snoop;
+		IGC_WRITE_REG(hw, IGC_GCR, gcr);
+	}
+}
+
+/**
+ *  igc_disable_pcie_master_generic - Disables PCI-express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns IGC_SUCCESS if successful, else returns -10
+ *  (-IGC_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ *  the master requests to be disabled.
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests.
+ **/
+s32 igc_disable_pcie_master_generic(struct igc_hw *hw)
+{
+	u32 ctrl;
+	s32 timeout = MASTER_DISABLE_TIMEOUT;
+
+	DEBUGFUNC("igc_disable_pcie_master_generic");
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	ctrl |= IGC_CTRL_GIO_MASTER_DISABLE;
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+
+	while (timeout) {
+		if (!(IGC_READ_REG(hw, IGC_STATUS) &
+		      IGC_STATUS_GIO_MASTER_ENABLE) ||
+				IGC_REMOVED(hw->hw_addr))
+			break;
+		usec_delay(100);
+		timeout--;
+	}
+
+	if (!timeout) {
+		DEBUGOUT("Master requests are pending.\n");
+		return -IGC_ERR_MASTER_REQUESTS_PENDING;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_reset_adaptive_generic - Reset Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
+void igc_reset_adaptive_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("igc_reset_adaptive_generic");
+
+	if (!mac->adaptive_ifs) {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	mac->current_ifs_val = 0;
+	mac->ifs_min_val = IFS_MIN;
+	mac->ifs_max_val = IFS_MAX;
+	mac->ifs_step_size = IFS_STEP;
+	mac->ifs_ratio = IFS_RATIO;
+
+	mac->in_ifs_mode = false;
+	IGC_WRITE_REG(hw, IGC_AIT, 0);
+}
+
+/**
+ *  igc_update_adaptive_generic - Update Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Update the Adaptive Interframe Spacing Throttle value based on the
+ *  time between transmitted packets and time between collisions.
+ **/
+void igc_update_adaptive_generic(struct igc_hw *hw)
+{
+	struct igc_mac_info *mac = &hw->mac;
+
+	DEBUGFUNC("igc_update_adaptive_generic");
+
+	if (!mac->adaptive_ifs) {
+		DEBUGOUT("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
+		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
+			mac->in_ifs_mode = true;
+			if (mac->current_ifs_val < mac->ifs_max_val) {
+				if (!mac->current_ifs_val)
+					mac->current_ifs_val = mac->ifs_min_val;
+				else
+					mac->current_ifs_val +=
+						mac->ifs_step_size;
+				IGC_WRITE_REG(hw, IGC_AIT,
+						mac->current_ifs_val);
+			}
+		}
+	} else {
+		if (mac->in_ifs_mode &&
+		    mac->tx_packet_delta <= MIN_NUM_XMITS) {
+			mac->current_ifs_val = 0;
+			mac->in_ifs_mode = false;
+			IGC_WRITE_REG(hw, IGC_AIT, 0);
+		}
+	}
+}
+
+/**
+ *  igc_validate_mdi_setting_generic - Verify MDI/MDIx settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify that when not using auto-negotiation that MDI/MDIx is correctly
+ *  set, which is forced to MDI mode only.
+ **/
+static s32 igc_validate_mdi_setting_generic(struct igc_hw *hw)
+{
+	DEBUGFUNC("igc_validate_mdi_setting_generic");
+
+	if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+		DEBUGOUT("Invalid MDI setting detected\n");
+		hw->phy.mdix = 1;
+		return -IGC_ERR_CONFIG;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Validate the MDI/MDIx setting, allowing for auto-crossover during forced
+ *  operation.
+ **/
+s32
+igc_validate_mdi_setting_crossover_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_validate_mdi_setting_crossover_generic");
+	UNREFERENCED_1PARAMETER(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register
+ *  @hw: pointer to the HW structure
+ *  @reg: 32bit register offset such as IGC_SCTL
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes an address/data control type register.  There are several of these
+ *  and they all have the format address << 8 | data and bit 31 is polled for
+ *  completion.
+ **/
+s32 igc_write_8bit_ctrl_reg_generic(struct igc_hw *hw, u32 reg,
+				      u32 offset, u8 data)
+{
+	u32 i, regvalue = 0;
+
+	DEBUGFUNC("igc_write_8bit_ctrl_reg_generic");
+
+	/* Set up the address and data */
+	regvalue = ((u32)data) | (offset << IGC_GEN_CTL_ADDRESS_SHIFT);
+	IGC_WRITE_REG(hw, reg, regvalue);
+
+	/* Poll the ready bit to see if the MDI read completed */
+	for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) {
+		usec_delay(5);
+		regvalue = IGC_READ_REG(hw, reg);
+		if (regvalue & IGC_GEN_CTL_READY)
+			break;
+	}
+	if (!(regvalue & IGC_GEN_CTL_READY)) {
+		DEBUGOUT1("Reg %08x did not indicate ready\n", reg);
+		return -IGC_ERR_PHY;
+	}
+
+	return IGC_SUCCESS;
+}
diff --git a/drivers/net/igc/base/igc_mac.h b/drivers/net/igc/base/igc_mac.h
new file mode 100644
index 0000000..f3c029d
--- /dev/null
+++ b/drivers/net/igc/base/igc_mac.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_MAC_H_
+#define _IGC_MAC_H_
+
+void igc_init_mac_ops_generic(struct igc_hw *hw);
+#define IGC_REMOVED(a) (0)
+void igc_null_mac_generic(struct igc_hw *hw);
+s32  igc_null_ops_generic(struct igc_hw *hw);
+s32  igc_null_link_info(struct igc_hw *hw, u16 *s, u16 *d);
+bool igc_null_mng_mode(struct igc_hw *hw);
+void igc_null_update_mc(struct igc_hw *hw, u8 *h, u32 a);
+void igc_null_write_vfta(struct igc_hw *hw, u32 a, u32 b);
+int  igc_null_rar_set(struct igc_hw *hw, u8 *h, u32 a);
+s32  igc_blink_led_generic(struct igc_hw *hw);
+s32  igc_check_for_copper_link_generic(struct igc_hw *hw);
+s32  igc_check_for_fiber_link_generic(struct igc_hw *hw);
+s32  igc_check_for_serdes_link_generic(struct igc_hw *hw);
+s32  igc_cleanup_led_generic(struct igc_hw *hw);
+s32  igc_commit_fc_settings_generic(struct igc_hw *hw);
+s32  igc_poll_fiber_serdes_link_generic(struct igc_hw *hw);
+s32  igc_config_fc_after_link_up_generic(struct igc_hw *hw);
+s32  igc_disable_pcie_master_generic(struct igc_hw *hw);
+s32  igc_force_mac_fc_generic(struct igc_hw *hw);
+s32  igc_get_auto_rd_done_generic(struct igc_hw *hw);
+s32  igc_get_bus_info_pci_generic(struct igc_hw *hw);
+s32  igc_get_bus_info_pcie_generic(struct igc_hw *hw);
+void igc_set_lan_id_single_port(struct igc_hw *hw);
+void igc_set_lan_id_multi_port_pci(struct igc_hw *hw);
+s32  igc_get_hw_semaphore_generic(struct igc_hw *hw);
+s32  igc_get_speed_and_duplex_copper_generic(struct igc_hw *hw, u16 *speed,
+					       u16 *duplex);
+s32  igc_get_speed_and_duplex_fiber_serdes_generic(struct igc_hw *hw,
+						     u16 *speed, u16 *duplex);
+s32  igc_id_led_init_generic(struct igc_hw *hw);
+s32  igc_led_on_generic(struct igc_hw *hw);
+s32  igc_led_off_generic(struct igc_hw *hw);
+void igc_update_mc_addr_list_generic(struct igc_hw *hw,
+				       u8 *mc_addr_list, u32 mc_addr_count);
+s32  igc_set_default_fc_generic(struct igc_hw *hw);
+s32  igc_set_fc_watermarks_generic(struct igc_hw *hw);
+s32  igc_setup_fiber_serdes_link_generic(struct igc_hw *hw);
+s32  igc_setup_led_generic(struct igc_hw *hw);
+s32  igc_setup_link_generic(struct igc_hw *hw);
+s32  igc_validate_mdi_setting_crossover_generic(struct igc_hw *hw);
+s32  igc_write_8bit_ctrl_reg_generic(struct igc_hw *hw, u32 reg,
+				       u32 offset, u8 data);
+
+u32  igc_hash_mc_addr_generic(struct igc_hw *hw, u8 *mc_addr);
+
+void igc_clear_hw_cntrs_base_generic(struct igc_hw *hw);
+void igc_clear_vfta_generic(struct igc_hw *hw);
+void igc_init_rx_addrs_generic(struct igc_hw *hw, u16 rar_count);
+void igc_pcix_mmrbc_workaround_generic(struct igc_hw *hw);
+void igc_put_hw_semaphore_generic(struct igc_hw *hw);
+s32  igc_check_alt_mac_addr_generic(struct igc_hw *hw);
+void igc_reset_adaptive_generic(struct igc_hw *hw);
+void igc_set_pcie_no_snoop_generic(struct igc_hw *hw, u32 no_snoop);
+void igc_update_adaptive_generic(struct igc_hw *hw);
+void igc_write_vfta_generic(struct igc_hw *hw, u32 offset, u32 value);
+
+#endif
diff --git a/drivers/net/igc/base/igc_manage.c b/drivers/net/igc/base/igc_manage.c
new file mode 100644
index 0000000..3c056f6
--- /dev/null
+++ b/drivers/net/igc/base/igc_manage.c
@@ -0,0 +1,547 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+#include "igc_manage.h"
+
+/**
+ *  igc_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+u8 igc_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	DEBUGFUNC("igc_calculate_checksum");
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8)(0 - sum);
+}
+
+/**
+ *  igc_mng_enable_host_if_generic - Checks host interface is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns IGC_success upon success, else IGC_ERR_HOST_INTERFACE_COMMAND
+ *
+ *  This function checks whether the HOST IF is enabled for command operation
+ *  and also checks whether the previous command is completed.  It busy waits
+ *  in case of previous command is not completed.
+ **/
+s32 igc_mng_enable_host_if_generic(struct igc_hw *hw)
+{
+	u32 hicr;
+	u8 i;
+
+	DEBUGFUNC("igc_mng_enable_host_if_generic");
+
+	if (!hw->mac.arc_subsystem_valid) {
+		DEBUGOUT("ARC subsystem not valid.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	if (!(hicr & IGC_HICR_EN)) {
+		DEBUGOUT("IGC_HOST_EN bit disabled.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+	/* check the previous command is completed */
+	for (i = 0; i < IGC_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+		hicr = IGC_READ_REG(hw, IGC_HICR);
+		if (!(hicr & IGC_HICR_C))
+			break;
+		msec_delay_irq(1);
+	}
+
+	if (i == IGC_MNG_DHCP_COMMAND_TIMEOUT) {
+		DEBUGOUT("Previous command timeout failed .\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_check_mng_mode_generic - Generic check management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the firmware semaphore register and returns true (>0) if
+ *  manageability is enabled, else false (0).
+ **/
+bool igc_check_mng_mode_generic(struct igc_hw *hw)
+{
+	u32 fwsm = IGC_READ_REG(hw, IGC_FWSM);
+
+	DEBUGFUNC("igc_check_mng_mode_generic");
+
+
+	return (fwsm & IGC_FWSM_MODE_MASK) ==
+		(IGC_MNG_IAMT_MODE << IGC_FWSM_MODE_SHIFT);
+}
+
+/**
+ *  igc_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx
+ *  @hw: pointer to the HW structure
+ *
+ *  Enables packet filtering on transmit packets if manageability is enabled
+ *  and host interface is enabled.
+ **/
+bool igc_enable_tx_pkt_filtering_generic(struct igc_hw *hw)
+{
+	struct igc_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+	u32 *buffer = (u32 *)&hw->mng_cookie;
+	u32 offset;
+	s32 ret_val, hdr_csum, csum;
+	u8 i, len;
+
+	DEBUGFUNC("igc_enable_tx_pkt_filtering_generic");
+
+	hw->mac.tx_pkt_filtering = true;
+
+	/* No manageability, no filtering */
+	if (!hw->mac.ops.check_mng_mode(hw)) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* If we can't read from the host interface for whatever
+	 * reason, disable filtering.
+	 */
+	ret_val = igc_mng_enable_host_if_generic(hw);
+	if (ret_val != IGC_SUCCESS) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Read in the header.  Length and offset are in dwords. */
+	len    = IGC_MNG_DHCP_COOKIE_LENGTH >> 2;
+	offset = IGC_MNG_DHCP_COOKIE_OFFSET >> 2;
+	for (i = 0; i < len; i++)
+		*(buffer + i) = IGC_READ_REG_ARRAY_DWORD(hw, IGC_HOST_IF,
+							   offset + i);
+	hdr_csum = hdr->checksum;
+	hdr->checksum = 0;
+	csum = igc_calculate_checksum((u8 *)hdr,
+					IGC_MNG_DHCP_COOKIE_LENGTH);
+	/* If either the checksums or signature don't match, then
+	 * the cookie area isn't considered valid, in which case we
+	 * take the safe route of assuming Tx filtering is enabled.
+	 */
+	if (hdr_csum != csum || hdr->signature != IGC_IAMT_SIGNATURE) {
+		hw->mac.tx_pkt_filtering = true;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Cookie area is valid, make the final check for filtering. */
+	if (!(hdr->status & IGC_MNG_DHCP_COOKIE_STATUS_PARSING))
+		hw->mac.tx_pkt_filtering = false;
+
+	return hw->mac.tx_pkt_filtering;
+}
+
+/**
+ *  igc_mng_write_cmd_header_generic - Writes manageability command header
+ *  @hw: pointer to the HW structure
+ *  @hdr: pointer to the host interface command header
+ *
+ *  Writes the command header after does the checksum calculation.
+ **/
+s32 igc_mng_write_cmd_header_generic(struct igc_hw *hw,
+				      struct igc_host_mng_command_header *hdr)
+{
+	u16 i, length = sizeof(struct igc_host_mng_command_header);
+
+	DEBUGFUNC("igc_mng_write_cmd_header_generic");
+
+	/* Write the whole command header structure with new checksum. */
+
+	hdr->checksum = igc_calculate_checksum((u8 *)hdr, length);
+
+	length >>= 2;
+	/* Write the relevant command block into the ram area. */
+	for (i = 0; i < length; i++) {
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF, i,
+					*((u32 *)hdr + i));
+		IGC_WRITE_FLUSH(hw);
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_mng_host_if_write_generic - Write to the manageability host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface buffer
+ *  @length: size of the buffer
+ *  @offset: location in the buffer to write to
+ *  @sum: sum of the data (not checksum)
+ *
+ *  This function writes the buffer content at the offset given on the host if.
+ *  It also does alignment considerations to do the writes in most efficient
+ *  way.  Also fills up the sum of the buffer in *buffer parameter.
+ **/
+s32 igc_mng_host_if_write_generic(struct igc_hw *hw, u8 *buffer,
+				    u16 length, u16 offset, u8 *sum)
+{
+	u8 *tmp;
+	u8 *bufptr = buffer;
+	u32 data = 0;
+	u16 remaining, i, j, prev_bytes;
+
+	DEBUGFUNC("igc_mng_host_if_write_generic");
+
+	/* sum = only sum of the data and it is not checksum */
+
+	if (length == 0 || offset + length > IGC_HI_MAX_MNG_DATA_LENGTH)
+		return -IGC_ERR_PARAM;
+
+	tmp = (u8 *)&data;
+	prev_bytes = offset & 0x3;
+	offset >>= 2;
+
+	if (prev_bytes) {
+		data = IGC_READ_REG_ARRAY_DWORD(hw, IGC_HOST_IF, offset);
+		for (j = prev_bytes; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF, offset, data);
+		length -= j - prev_bytes;
+		offset++;
+	}
+
+	remaining = length & 0x3;
+	length -= remaining;
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant command block into the
+	 * ram area.
+	 */
+	for (i = 0; i < length; i++) {
+		for (j = 0; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF, offset + i,
+					    data);
+	}
+	if (remaining) {
+		for (j = 0; j < sizeof(u32); j++) {
+			if (j < remaining)
+				*(tmp + j) = *bufptr++;
+			else
+				*(tmp + j) = 0;
+
+			*sum += *(tmp + j);
+		}
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF, offset + i,
+					    data);
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_mng_write_dhcp_info_generic - Writes DHCP info to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface
+ *  @length: size of the buffer
+ *
+ *  Writes the DHCP information to the host interface.
+ **/
+s32 igc_mng_write_dhcp_info_generic(struct igc_hw *hw, u8 *buffer,
+				      u16 length)
+{
+	struct igc_host_mng_command_header hdr;
+	s32 ret_val;
+	u32 hicr;
+
+	DEBUGFUNC("igc_mng_write_dhcp_info_generic");
+
+	hdr.command_id = IGC_MNG_DHCP_TX_PAYLOAD_CMD;
+	hdr.command_length = length;
+	hdr.reserved1 = 0;
+	hdr.reserved2 = 0;
+	hdr.checksum = 0;
+
+	/* Enable the host interface */
+	ret_val = igc_mng_enable_host_if_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Populate the host interface with the contents of "buffer". */
+	ret_val = igc_mng_host_if_write_generic(hw, buffer, length,
+						sizeof(hdr), &hdr.checksum);
+	if (ret_val)
+		return ret_val;
+
+	/* Write the manageability command header */
+	ret_val = igc_mng_write_cmd_header_generic(hw, &hdr);
+	if (ret_val)
+		return ret_val;
+
+	/* Tell the ARC a new command is pending. */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	IGC_WRITE_REG(hw, IGC_HICR, hicr | IGC_HICR_C);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_enable_mng_pass_thru - Check if management passthrough is needed
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies the hardware needs to leave interface enabled so that frames can
+ *  be directed to and from the management interface.
+ **/
+bool igc_enable_mng_pass_thru(struct igc_hw *hw)
+{
+	u32 manc;
+	u32 fwsm, factps;
+
+	DEBUGFUNC("igc_enable_mng_pass_thru");
+
+	if (!hw->mac.asf_firmware_present)
+		return false;
+
+	manc = IGC_READ_REG(hw, IGC_MANC);
+
+	if (!(manc & IGC_MANC_RCV_TCO_EN))
+		return false;
+
+	if (hw->mac.has_fwsm) {
+		fwsm = IGC_READ_REG(hw, IGC_FWSM);
+		factps = IGC_READ_REG(hw, IGC_FACTPS);
+
+		if (!(factps & IGC_FACTPS_MNGCG) &&
+		    ((fwsm & IGC_FWSM_MODE_MASK) ==
+		     (igc_mng_mode_pt << IGC_FWSM_MODE_SHIFT)))
+			return true;
+	} else if ((hw->mac.type == igc_82574) ||
+		   (hw->mac.type == igc_82583)) {
+		u16 data;
+		s32 ret_val;
+
+		factps = IGC_READ_REG(hw, IGC_FACTPS);
+		ret_val = igc_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+		if (ret_val)
+			return false;
+
+		if (!(factps & IGC_FACTPS_MNGCG) &&
+		    ((data & IGC_NVM_INIT_CTRL2_MNGM) ==
+		     (igc_mng_mode_pt << 13)))
+			return true;
+	} else if ((manc & IGC_MANC_SMBUS_EN) &&
+		   !(manc & IGC_MANC_ASF_EN)) {
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ *  igc_host_interface_command - Writes buffer to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains a command to write
+ *  @length: the byte length of the buffer, must be multiple of 4 bytes
+ *
+ *  Writes a buffer to the Host Interface.  Upon success, returns IGC_SUCCESS
+ *  else returns IGC_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 igc_host_interface_command(struct igc_hw *hw, u8 *buffer, u32 length)
+{
+	u32 hicr, i;
+
+	DEBUGFUNC("igc_host_interface_command");
+
+	if (!(hw->mac.arc_subsystem_valid)) {
+		DEBUGOUT("Hardware doesn't support host interface command.\n");
+		return IGC_SUCCESS;
+	}
+
+	if (!hw->mac.asf_firmware_present) {
+		DEBUGOUT("Firmware is not present.\n");
+		return IGC_SUCCESS;
+	}
+
+	if (length == 0 || length & 0x3 ||
+	    length > IGC_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT("Buffer length failure.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	if (!(hicr & IGC_HICR_EN)) {
+		DEBUGOUT("IGC_HOST_EN bit disabled.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < length; i++)
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF, i,
+					    *((u32 *)buffer + i));
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	IGC_WRITE_REG(hw, IGC_HICR, hicr | IGC_HICR_C);
+
+	for (i = 0; i < IGC_HI_COMMAND_TIMEOUT; i++) {
+		hicr = IGC_READ_REG(hw, IGC_HICR);
+		if (!(hicr & IGC_HICR_C))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check command successful completion. */
+	if (i == IGC_HI_COMMAND_TIMEOUT ||
+	    (!(IGC_READ_REG(hw, IGC_HICR) & IGC_HICR_SV))) {
+		DEBUGOUT("Command has failed with no status valid.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	for (i = 0; i < length; i++)
+		*((u32 *)buffer + i) = IGC_READ_REG_ARRAY_DWORD(hw,
+								  IGC_HOST_IF,
+								  i);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_load_firmware - Writes proxy FW code buffer to host interface
+ *                        and execute.
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains a firmware to write
+ *  @length: the byte length of the buffer, must be multiple of 4 bytes
+ *
+ *  Upon success returns IGC_SUCCESS, returns IGC_ERR_CONFIG if not enabled
+ *  in HW else returns IGC_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 igc_load_firmware(struct igc_hw *hw, u8 *buffer, u32 length)
+{
+	u32 hicr, hibba, fwsm, icr, i;
+
+	DEBUGFUNC("igc_load_firmware");
+
+	if (hw->mac.type < igc_i210) {
+		DEBUGOUT("Hardware doesn't support loading FW by the driver\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	if (!(hicr & IGC_HICR_EN)) {
+		DEBUGOUT("IGC_HOST_EN bit disabled.\n");
+		return -IGC_ERR_CONFIG;
+	}
+	if (!(hicr & IGC_HICR_MEMORY_BASE_EN)) {
+		DEBUGOUT("IGC_HICR_MEMORY_BASE_EN bit disabled.\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	if (length == 0 || length & 0x3 || length > IGC_HI_FW_MAX_LENGTH) {
+		DEBUGOUT("Buffer length failure.\n");
+		return -IGC_ERR_INVALID_ARGUMENT;
+	}
+
+	/* Clear notification from ROM-FW by reading ICR register */
+	icr = IGC_READ_REG(hw, IGC_ICR_V2);
+
+	/* Reset ROM-FW */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	hicr |= IGC_HICR_FW_RESET_ENABLE;
+	IGC_WRITE_REG(hw, IGC_HICR, hicr);
+	hicr |= IGC_HICR_FW_RESET;
+	IGC_WRITE_REG(hw, IGC_HICR, hicr);
+	IGC_WRITE_FLUSH(hw);
+
+	/* Wait till MAC notifies about its readiness after ROM-FW reset */
+	for (i = 0; i < (IGC_HI_COMMAND_TIMEOUT * 2); i++) {
+		icr = IGC_READ_REG(hw, IGC_ICR_V2);
+		if (icr & IGC_ICR_MNG)
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for timeout */
+	if (i == IGC_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("FW reset failed.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Wait till MAC is ready to accept new FW code */
+	for (i = 0; i < IGC_HI_COMMAND_TIMEOUT; i++) {
+		fwsm = IGC_READ_REG(hw, IGC_FWSM);
+		if ((fwsm & IGC_FWSM_FW_VALID) &&
+		    ((fwsm & IGC_FWSM_MODE_MASK) >> IGC_FWSM_MODE_SHIFT ==
+		    IGC_FWSM_HI_EN_ONLY_MODE))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for timeout */
+	if (i == IGC_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("FW reset failed.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant FW code block
+	 * into the ram area in DWORDs via 1kB ram addressing window.
+	 */
+	for (i = 0; i < length; i++) {
+		if (!(i % IGC_HI_FW_BLOCK_DWORD_LENGTH)) {
+			/* Point to correct 1kB ram window */
+			hibba = IGC_HI_FW_BASE_ADDRESS +
+				((IGC_HI_FW_BLOCK_DWORD_LENGTH << 2) *
+				(i / IGC_HI_FW_BLOCK_DWORD_LENGTH));
+
+			IGC_WRITE_REG(hw, IGC_HIBBA, hibba);
+		}
+
+		IGC_WRITE_REG_ARRAY_DWORD(hw, IGC_HOST_IF,
+					    i % IGC_HI_FW_BLOCK_DWORD_LENGTH,
+					    *((u32 *)buffer + i));
+	}
+
+	/* Setting this bit tells the ARC that a new FW is ready to execute. */
+	hicr = IGC_READ_REG(hw, IGC_HICR);
+	IGC_WRITE_REG(hw, IGC_HICR, hicr | IGC_HICR_C);
+
+	for (i = 0; i < IGC_HI_COMMAND_TIMEOUT; i++) {
+		hicr = IGC_READ_REG(hw, IGC_HICR);
+		if (!(hicr & IGC_HICR_C))
+			break;
+		msec_delay(1);
+	}
+
+	/* Check for successful FW start. */
+	if (i == IGC_HI_COMMAND_TIMEOUT) {
+		DEBUGOUT("New FW did not start within timeout period.\n");
+		return -IGC_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return IGC_SUCCESS;
+}
diff --git a/drivers/net/igc/base/igc_manage.h b/drivers/net/igc/base/igc_manage.h
new file mode 100644
index 0000000..e4e5459
--- /dev/null
+++ b/drivers/net/igc/base/igc_manage.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_MANAGE_H_
+#define _IGC_MANAGE_H_
+
+bool igc_check_mng_mode_generic(struct igc_hw *hw);
+bool igc_enable_tx_pkt_filtering_generic(struct igc_hw *hw);
+s32  igc_mng_enable_host_if_generic(struct igc_hw *hw);
+s32  igc_mng_host_if_write_generic(struct igc_hw *hw, u8 *buffer,
+				     u16 length, u16 offset, u8 *sum);
+s32  igc_mng_write_cmd_header_generic(struct igc_hw *hw,
+				     struct igc_host_mng_command_header *hdr);
+s32  igc_mng_write_dhcp_info_generic(struct igc_hw *hw,
+				       u8 *buffer, u16 length);
+bool igc_enable_mng_pass_thru(struct igc_hw *hw);
+u8 igc_calculate_checksum(u8 *buffer, u32 length);
+s32 igc_host_interface_command(struct igc_hw *hw, u8 *buffer, u32 length);
+s32 igc_load_firmware(struct igc_hw *hw, u8 *buffer, u32 length);
+
+enum igc_mng_mode {
+	igc_mng_mode_none = 0,
+	igc_mng_mode_asf,
+	igc_mng_mode_pt,
+	igc_mng_mode_ipmi,
+	igc_mng_mode_host_if_only
+};
+
+#define IGC_FACTPS_MNGCG			0x20000000
+
+#define IGC_FWSM_MODE_MASK			0xE
+#define IGC_FWSM_MODE_SHIFT			1
+#define IGC_FWSM_FW_VALID			0x00008000
+#define IGC_FWSM_HI_EN_ONLY_MODE		0x4
+
+#define IGC_MNG_IAMT_MODE			0x3
+#define IGC_MNG_DHCP_COOKIE_LENGTH		0x10
+#define IGC_MNG_DHCP_COOKIE_OFFSET		0x6F0
+#define IGC_MNG_DHCP_COMMAND_TIMEOUT		10
+#define IGC_MNG_DHCP_TX_PAYLOAD_CMD		64
+#define IGC_MNG_DHCP_COOKIE_STATUS_PARSING	0x1
+#define IGC_MNG_DHCP_COOKIE_STATUS_VLAN	0x2
+
+#define IGC_VFTA_ENTRY_SHIFT			5
+#define IGC_VFTA_ENTRY_MASK			0x7F
+#define IGC_VFTA_ENTRY_BIT_SHIFT_MASK		0x1F
+
+#define IGC_HI_MAX_BLOCK_BYTE_LENGTH		1792 /* Num of bytes in range */
+#define IGC_HI_MAX_BLOCK_DWORD_LENGTH		448 /* Num of dwords in range */
+#define IGC_HI_COMMAND_TIMEOUT		500 /* Process HI cmd limit */
+#define IGC_HI_FW_BASE_ADDRESS		0x10000
+#define IGC_HI_FW_MAX_LENGTH			(64 * 1024) /* Num of bytes */
+#define IGC_HI_FW_BLOCK_DWORD_LENGTH		256 /* Num of DWORDs per page */
+#define IGC_HICR_MEMORY_BASE_EN		0x200 /* MB Enable bit - RO */
+#define IGC_HICR_EN			0x01  /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define IGC_HICR_C			0x02
+#define IGC_HICR_SV			0x04  /* Status Validity */
+#define IGC_HICR_FW_RESET_ENABLE	0x40
+#define IGC_HICR_FW_RESET		0x80
+
+/* Intel(R) Active Management Technology signature */
+#define IGC_IAMT_SIGNATURE		0x544D4149
+#endif
diff --git a/drivers/net/igc/base/igc_nvm.c b/drivers/net/igc/base/igc_nvm.c
new file mode 100644
index 0000000..9dc88a2
--- /dev/null
+++ b/drivers/net/igc/base/igc_nvm.c
@@ -0,0 +1,1324 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+
+static void igc_reload_nvm_generic(struct igc_hw *hw);
+
+/**
+ *  igc_init_nvm_ops_generic - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void igc_init_nvm_ops_generic(struct igc_hw *hw)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	DEBUGFUNC("igc_init_nvm_ops_generic");
+
+	/* Initialize function pointers */
+	nvm->ops.init_params = igc_null_ops_generic;
+	nvm->ops.acquire = igc_null_ops_generic;
+	nvm->ops.read = igc_null_read_nvm;
+	nvm->ops.release = igc_null_nvm_generic;
+	nvm->ops.reload = igc_reload_nvm_generic;
+	nvm->ops.update = igc_null_ops_generic;
+	nvm->ops.valid_led_default = igc_null_led_default;
+	nvm->ops.validate = igc_null_ops_generic;
+	nvm->ops.write = igc_null_write_nvm;
+}
+
+/**
+ *  igc_null_nvm_read - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @a: dummy variable
+ *  @b: dummy variable
+ *  @c: dummy variable
+ **/
+s32 igc_null_read_nvm(struct igc_hw IGC_UNUSEDARG * hw,
+			u16 IGC_UNUSEDARG a, u16 IGC_UNUSEDARG b,
+			u16 IGC_UNUSEDARG * c)
+{
+	DEBUGFUNC("igc_null_read_nvm");
+	UNREFERENCED_4PARAMETER(hw, a, b, c);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_nvm_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void igc_null_nvm_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_null_nvm_generic");
+	UNREFERENCED_1PARAMETER(hw);
+}
+
+/**
+ *  igc_null_led_default - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @data: dummy variable
+ **/
+s32 igc_null_led_default(struct igc_hw IGC_UNUSEDARG * hw,
+			   u16 IGC_UNUSEDARG * data)
+{
+	DEBUGFUNC("igc_null_led_default");
+	UNREFERENCED_2PARAMETER(hw, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_write_nvm - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @a: dummy variable
+ *  @b: dummy variable
+ *  @c: dummy variable
+ **/
+s32 igc_null_write_nvm(struct igc_hw IGC_UNUSEDARG * hw,
+			 u16 IGC_UNUSEDARG a, u16 IGC_UNUSEDARG b,
+			 u16 IGC_UNUSEDARG * c)
+{
+	DEBUGFUNC("igc_null_write_nvm");
+	UNREFERENCED_4PARAMETER(hw, a, b, c);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_raise_eec_clk - Raise EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Enable/Raise the EEPROM clock bit.
+ **/
+static void igc_raise_eec_clk(struct igc_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd | IGC_EECD_SK;
+	IGC_WRITE_REG(hw, IGC_EECD, *eecd);
+	IGC_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  igc_lower_eec_clk - Lower EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Clear/Lower the EEPROM clock bit.
+ **/
+static void igc_lower_eec_clk(struct igc_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd & ~IGC_EECD_SK;
+	IGC_WRITE_REG(hw, IGC_EECD, *eecd);
+	IGC_WRITE_FLUSH(hw);
+	usec_delay(hw->nvm.delay_usec);
+}
+
+/**
+ *  igc_shift_out_eec_bits - Shift data bits our to the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ *
+ *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
+ *  "data" parameter will be shifted out to the EEPROM one bit at a time.
+ *  In order to do this, "data" must be broken down into bits.
+ **/
+static void igc_shift_out_eec_bits(struct igc_hw *hw, u16 data, u16 count)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 eecd = IGC_READ_REG(hw, IGC_EECD);
+	u32 mask;
+
+	DEBUGFUNC("igc_shift_out_eec_bits");
+
+	mask = 0x01 << (count - 1);
+	if (nvm->type == igc_nvm_eeprom_microwire)
+		eecd &= ~IGC_EECD_DO;
+	else if (nvm->type == igc_nvm_eeprom_spi)
+		eecd |= IGC_EECD_DO;
+
+	do {
+		eecd &= ~IGC_EECD_DI;
+
+		if (data & mask)
+			eecd |= IGC_EECD_DI;
+
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+
+		usec_delay(nvm->delay_usec);
+
+		igc_raise_eec_clk(hw, &eecd);
+		igc_lower_eec_clk(hw, &eecd);
+
+		mask >>= 1;
+	} while (mask);
+
+	eecd &= ~IGC_EECD_DI;
+	IGC_WRITE_REG(hw, IGC_EECD, eecd);
+}
+
+/**
+ *  igc_shift_in_eec_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @count: number of bits to shift in
+ *
+ *  In order to read a register from the EEPROM, we need to shift 'count' bits
+ *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
+ *  the EEPROM (setting the SK bit), and then reading the value of the data out
+ *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
+ *  always be clear.
+ **/
+static u16 igc_shift_in_eec_bits(struct igc_hw *hw, u16 count)
+{
+	u32 eecd;
+	u32 i;
+	u16 data;
+
+	DEBUGFUNC("igc_shift_in_eec_bits");
+
+	eecd = IGC_READ_REG(hw, IGC_EECD);
+
+	eecd &= ~(IGC_EECD_DO | IGC_EECD_DI);
+	data = 0;
+
+	for (i = 0; i < count; i++) {
+		data <<= 1;
+		igc_raise_eec_clk(hw, &eecd);
+
+		eecd = IGC_READ_REG(hw, IGC_EECD);
+
+		eecd &= ~IGC_EECD_DI;
+		if (eecd & IGC_EECD_DO)
+			data |= 1;
+
+		igc_lower_eec_clk(hw, &eecd);
+	}
+
+	return data;
+}
+
+/**
+ *  igc_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ *  @hw: pointer to the HW structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the EEPROM status bit for either read or write completion based
+ *  upon the value of 'ee_reg'.
+ **/
+s32 igc_poll_eerd_eewr_done(struct igc_hw *hw, int ee_reg)
+{
+	u32 attempts = 100000;
+	u32 i, reg = 0;
+
+	DEBUGFUNC("igc_poll_eerd_eewr_done");
+
+	for (i = 0; i < attempts; i++) {
+		if (ee_reg == IGC_NVM_POLL_READ)
+			reg = IGC_READ_REG(hw, IGC_EERD);
+		else
+			reg = IGC_READ_REG(hw, IGC_EEWR);
+
+		if (reg & IGC_NVM_RW_REG_DONE)
+			return IGC_SUCCESS;
+
+		usec_delay(5);
+	}
+
+	return -IGC_ERR_NVM;
+}
+
+/**
+ *  igc_acquire_nvm_generic - Generic request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -IGC_ERR_NVM (-1).
+ **/
+s32 igc_acquire_nvm_generic(struct igc_hw *hw)
+{
+	u32 eecd = IGC_READ_REG(hw, IGC_EECD);
+	s32 timeout = IGC_NVM_GRANT_ATTEMPTS;
+
+	DEBUGFUNC("igc_acquire_nvm_generic");
+
+	IGC_WRITE_REG(hw, IGC_EECD, eecd | IGC_EECD_REQ);
+	eecd = IGC_READ_REG(hw, IGC_EECD);
+
+	while (timeout) {
+		if (eecd & IGC_EECD_GNT)
+			break;
+		usec_delay(5);
+		eecd = IGC_READ_REG(hw, IGC_EECD);
+		timeout--;
+	}
+
+	if (!timeout) {
+		eecd &= ~IGC_EECD_REQ;
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		DEBUGOUT("Could not acquire NVM grant\n");
+		return -IGC_ERR_NVM;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_standby_nvm - Return EEPROM to standby state
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the EEPROM to a standby state.
+ **/
+static void igc_standby_nvm(struct igc_hw *hw)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 eecd = IGC_READ_REG(hw, IGC_EECD);
+
+	DEBUGFUNC("igc_standby_nvm");
+
+	if (nvm->type == igc_nvm_eeprom_microwire) {
+		eecd &= ~(IGC_EECD_CS | IGC_EECD_SK);
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+
+		igc_raise_eec_clk(hw, &eecd);
+
+		/* Select EEPROM */
+		eecd |= IGC_EECD_CS;
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+
+		igc_lower_eec_clk(hw, &eecd);
+	} else if (nvm->type == igc_nvm_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= IGC_EECD_CS;
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+		eecd &= ~IGC_EECD_CS;
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+		usec_delay(nvm->delay_usec);
+	}
+}
+
+/**
+ *  igc_stop_nvm - Terminate EEPROM command
+ *  @hw: pointer to the HW structure
+ *
+ *  Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+void igc_stop_nvm(struct igc_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("igc_stop_nvm");
+
+	eecd = IGC_READ_REG(hw, IGC_EECD);
+	if (hw->nvm.type == igc_nvm_eeprom_spi) {
+		/* Pull CS high */
+		eecd |= IGC_EECD_CS;
+		igc_lower_eec_clk(hw, &eecd);
+	} else if (hw->nvm.type == igc_nvm_eeprom_microwire) {
+		/* CS on Microwire is active-high */
+		eecd &= ~(IGC_EECD_CS | IGC_EECD_DI);
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		igc_raise_eec_clk(hw, &eecd);
+		igc_lower_eec_clk(hw, &eecd);
+	}
+}
+
+/**
+ *  igc_release_nvm_generic - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igc_release_nvm_generic(struct igc_hw *hw)
+{
+	u32 eecd;
+
+	DEBUGFUNC("igc_release_nvm_generic");
+
+	igc_stop_nvm(hw);
+
+	eecd = IGC_READ_REG(hw, IGC_EECD);
+	eecd &= ~IGC_EECD_REQ;
+	IGC_WRITE_REG(hw, IGC_EECD, eecd);
+}
+
+/**
+ *  igc_ready_nvm_eeprom - Prepares EEPROM for read/write
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups the EEPROM for reading and writing.
+ **/
+static s32 igc_ready_nvm_eeprom(struct igc_hw *hw)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 eecd = IGC_READ_REG(hw, IGC_EECD);
+	u8 spi_stat_reg;
+
+	DEBUGFUNC("igc_ready_nvm_eeprom");
+
+	if (nvm->type == igc_nvm_eeprom_microwire) {
+		/* Clear SK and DI */
+		eecd &= ~(IGC_EECD_DI | IGC_EECD_SK);
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		/* Set CS */
+		eecd |= IGC_EECD_CS;
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+	} else if (nvm->type == igc_nvm_eeprom_spi) {
+		u16 timeout = NVM_MAX_RETRY_SPI;
+
+		/* Clear SK and CS */
+		eecd &= ~(IGC_EECD_CS | IGC_EECD_SK);
+		IGC_WRITE_REG(hw, IGC_EECD, eecd);
+		IGC_WRITE_FLUSH(hw);
+		usec_delay(1);
+
+		/* Read "Status Register" repeatedly until the LSB is cleared.
+		 * The EEPROM will signal that the command has been completed
+		 * by clearing bit 0 of the internal status register.  If it's
+		 * not cleared within 'timeout', then error out.
+		 */
+		while (timeout) {
+			igc_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+						 hw->nvm.opcode_bits);
+			spi_stat_reg = (u8)igc_shift_in_eec_bits(hw, 8);
+			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+				break;
+
+			usec_delay(5);
+			igc_standby_nvm(hw);
+			timeout--;
+		}
+
+		if (!timeout) {
+			DEBUGOUT("SPI NVM Status error\n");
+			return -IGC_ERR_NVM;
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_nvm_spi - Read EEPROM's using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 igc_read_nvm_spi(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u16 word_in;
+	u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+	DEBUGFUNC("igc_read_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -IGC_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	igc_standby_nvm(hw);
+
+	if (nvm->address_bits == 8 && offset >= 128)
+		read_opcode |= NVM_A8_OPCODE_SPI;
+
+	/* Send the READ command (opcode + addr) */
+	igc_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+	igc_shift_out_eec_bits(hw, (u16)(offset * 2), nvm->address_bits);
+
+	/* Read the data.  SPI NVMs increment the address with each byte
+	 * read and will roll over if reading beyond the end.  This allows
+	 * us to read the whole NVM from any offset
+	 */
+	for (i = 0; i < words; i++) {
+		word_in = igc_shift_in_eec_bits(hw, 16);
+		data[i] = (word_in >> 8) | (word_in << 8);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_nvm_microwire - Reads EEPROM's using microwire
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM.
+ **/
+s32 igc_read_nvm_microwire(struct igc_hw *hw, u16 offset, u16 words,
+			     u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 i = 0;
+	s32 ret_val;
+	u8 read_opcode = NVM_READ_OPCODE_MICROWIRE;
+
+	DEBUGFUNC("igc_read_nvm_microwire");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -IGC_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	for (i = 0; i < words; i++) {
+		/* Send the READ command (opcode + addr) */
+		igc_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+		igc_shift_out_eec_bits(hw, (u16)(offset + i),
+					nvm->address_bits);
+
+		/* Read the data.  For microwire, each word requires the
+		 * overhead of setup and tear-down.
+		 */
+		data[i] = igc_shift_in_eec_bits(hw, 16);
+		igc_standby_nvm(hw);
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_nvm_eerd - Reads EEPROM using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igc_read_nvm_eerd(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	u32 i, eerd = 0;
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_read_nvm_eerd");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -IGC_ERR_NVM;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) +
+		       IGC_NVM_RW_REG_START;
+
+		IGC_WRITE_REG(hw, IGC_EERD, eerd);
+		ret_val = igc_poll_eerd_eewr_done(hw, IGC_NVM_POLL_READ);
+		if (ret_val)
+			break;
+
+		data[i] = (IGC_READ_REG(hw, IGC_EERD) >>
+			   IGC_NVM_RW_REG_DATA);
+	}
+
+	if (ret_val)
+		DEBUGOUT1("NVM read error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  igc_write_nvm_spi - Write to EEPROM using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using SPI interface.
+ *
+ *  If igc_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 igc_write_nvm_spi(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	s32 ret_val = -IGC_ERR_NVM;
+	u16 widx = 0;
+
+	DEBUGFUNC("igc_write_nvm_spi");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -IGC_ERR_NVM;
+	}
+
+	while (widx < words) {
+		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+		ret_val = nvm->ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = igc_ready_nvm_eeprom(hw);
+		if (ret_val) {
+			nvm->ops.release(hw);
+			return ret_val;
+		}
+
+		igc_standby_nvm(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		igc_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+					 nvm->opcode_bits);
+
+		igc_standby_nvm(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if (nvm->address_bits == 8 && offset >= 128)
+			write_opcode |= NVM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		igc_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+		igc_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+					 nvm->address_bits);
+
+		/* Loop to allow for up to whole page write of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+			word_out = (word_out >> 8) | (word_out << 8);
+			igc_shift_out_eec_bits(hw, word_out, 16);
+			widx++;
+
+			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+				igc_standby_nvm(hw);
+				break;
+			}
+		}
+		msec_delay(10);
+		nvm->ops.release(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_write_nvm_microwire - Writes EEPROM using microwire
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using microwire interface.
+ *
+ *  If igc_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 igc_write_nvm_microwire(struct igc_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	struct igc_nvm_info *nvm = &hw->nvm;
+	s32  ret_val;
+	u32 eecd;
+	u16 words_written = 0;
+	u16 widx = 0;
+
+	DEBUGFUNC("igc_write_nvm_microwire");
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if (offset >= nvm->word_size || words > (nvm->word_size - offset) ||
+			words == 0) {
+		DEBUGOUT("nvm parameter(s) out of bounds\n");
+		return -IGC_ERR_NVM;
+	}
+
+	ret_val = nvm->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_ready_nvm_eeprom(hw);
+	if (ret_val)
+		goto release;
+
+	igc_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE,
+				 (u16)(nvm->opcode_bits + 2));
+
+	igc_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
+
+	igc_standby_nvm(hw);
+
+	while (words_written < words) {
+		igc_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE,
+					 nvm->opcode_bits);
+
+		igc_shift_out_eec_bits(hw, (u16)(offset + words_written),
+					 nvm->address_bits);
+
+		igc_shift_out_eec_bits(hw, data[words_written], 16);
+
+		igc_standby_nvm(hw);
+
+		for (widx = 0; widx < 200; widx++) {
+			eecd = IGC_READ_REG(hw, IGC_EECD);
+			if (eecd & IGC_EECD_DO)
+				break;
+			usec_delay(50);
+		}
+
+		if (widx == 200) {
+			DEBUGOUT("NVM Write did not complete\n");
+			ret_val = -IGC_ERR_NVM;
+			goto release;
+		}
+
+		igc_standby_nvm(hw);
+
+		words_written++;
+	}
+
+	igc_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE,
+				 (u16)(nvm->opcode_bits + 2));
+
+	igc_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
+
+release:
+	nvm->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_pba_string_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 igc_read_pba_string_generic(struct igc_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	DEBUGFUNC("igc_read_pba_string_generic");
+
+	if (pba_num == NULL) {
+		DEBUGOUT("PBA string buffer was null\n");
+		return -IGC_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	/* if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		DEBUGOUT("NVM PBA number is not stored as string\n");
+
+		/* make sure callers buffer is big enough to store the PBA */
+		if (pba_num_size < IGC_PBANUM_LENGTH) {
+			DEBUGOUT("PBA string buffer too small\n");
+			return IGC_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (nvm_data >> 12) & 0xF;
+		pba_num[1] = (nvm_data >> 8) & 0xF;
+		pba_num[2] = (nvm_data >> 4) & 0xF;
+		pba_num[3] = nvm_data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return IGC_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -IGC_ERR_NVM_PBA_SECTION;
+	}
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size < (((u32)length * 2) - 1)) {
+		DEBUGOUT("PBA string buffer too small\n");
+		return -IGC_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(nvm_data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_pba_length_generic - Read device part number length
+ *  @hw: pointer to the HW structure
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number length from the EEPROM and
+ *  stores the value in pba_num_size.
+ **/
+s32 igc_read_pba_length_generic(struct igc_hw *hw, u32 *pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 length;
+
+	DEBUGFUNC("igc_read_pba_length_generic");
+
+	if (pba_num_size == NULL) {
+		DEBUGOUT("PBA buffer size was null\n");
+		return -IGC_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	 /* if data is not ptr guard the PBA must be in legacy format */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		*pba_num_size = IGC_PBANUM_LENGTH;
+		return IGC_SUCCESS;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		DEBUGOUT("NVM PBA number section invalid length\n");
+		return -IGC_ERR_NVM_PBA_SECTION;
+	}
+
+	/* Convert from length in u16 values to u8 chars, add 1 for NULL,
+	 * and subtract 2 because length field is included in length.
+	 */
+	*pba_num_size = ((u32)length * 2) - 1;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_pba_num_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 igc_read_pba_num_generic(struct igc_hw *hw, u32 *pba_num)
+{
+	s32 ret_val;
+	u16 nvm_data;
+
+	DEBUGFUNC("igc_read_pba_num_generic");
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	} else if (nvm_data == NVM_PBA_PTR_GUARD) {
+		DEBUGOUT("NVM Not Supported\n");
+		return -IGC_NOT_IMPLEMENTED;
+	}
+	*pba_num = (u32)(nvm_data << 16);
+
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
+	if (ret_val) {
+		DEBUGOUT("NVM Read Error\n");
+		return ret_val;
+	}
+	*pba_num |= nvm_data;
+
+	return IGC_SUCCESS;
+}
+
+
+/**
+ *  igc_read_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @max_pba_block_size: PBA block size limit
+ *  @pba: pointer to output PBA structure
+ *
+ *  Reads PBA from EEPROM image when eeprom_buf is not NULL.
+ *  Reads PBA from physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 igc_read_pba_raw(struct igc_hw *hw, u16 *eeprom_buf,
+		       u32 eeprom_buf_size, u16 max_pba_block_size,
+		       struct igc_pba *pba)
+{
+	s32 ret_val;
+	u16 pba_block_size;
+
+	if (pba == NULL)
+		return -IGC_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = igc_read_nvm(hw, NVM_PBA_OFFSET_0, 2,
+					 &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			pba->word[0] = eeprom_buf[NVM_PBA_OFFSET_0];
+			pba->word[1] = eeprom_buf[NVM_PBA_OFFSET_1];
+		} else {
+			return -IGC_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == NVM_PBA_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return -IGC_ERR_PARAM;
+
+		ret_val = igc_get_pba_block_size(hw, eeprom_buf,
+						   eeprom_buf_size,
+						   &pba_block_size);
+		if (ret_val)
+			return ret_val;
+
+		if (pba_block_size > max_pba_block_size)
+			return -IGC_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = igc_read_nvm(hw, pba->word[1],
+						 pba_block_size,
+						 pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba_block_size)) {
+				memcpy(pba->pba_block,
+				       &eeprom_buf[pba->word[1]],
+				       pba_block_size * sizeof(u16));
+			} else {
+				return -IGC_ERR_PARAM;
+			}
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_pba_raw
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba: pointer to PBA structure
+ *
+ *  Writes PBA to EEPROM image when eeprom_buf is not NULL.
+ *  Writes PBA to physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 igc_write_pba_raw(struct igc_hw *hw, u16 *eeprom_buf,
+			u32 eeprom_buf_size, struct igc_pba *pba)
+{
+	s32 ret_val;
+
+	if (pba == NULL)
+		return -IGC_ERR_PARAM;
+
+	if (eeprom_buf == NULL) {
+		ret_val = igc_write_nvm(hw, NVM_PBA_OFFSET_0, 2,
+					  &pba->word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			eeprom_buf[NVM_PBA_OFFSET_0] = pba->word[0];
+			eeprom_buf[NVM_PBA_OFFSET_1] = pba->word[1];
+		} else {
+			return -IGC_ERR_PARAM;
+		}
+	}
+
+	if (pba->word[0] == NVM_PBA_PTR_GUARD) {
+		if (pba->pba_block == NULL)
+			return -IGC_ERR_PARAM;
+
+		if (eeprom_buf == NULL) {
+			ret_val = igc_write_nvm(hw, pba->word[1],
+						  pba->pba_block[0],
+						  pba->pba_block);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > (u32)(pba->word[1] +
+					      pba->pba_block[0])) {
+				memcpy(&eeprom_buf[pba->word[1]],
+				       pba->pba_block,
+				       pba->pba_block[0] * sizeof(u16));
+			} else {
+				return -IGC_ERR_PARAM;
+			}
+		}
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_pba_block_size
+ *  @hw: pointer to the HW structure
+ *  @eeprom_buf: optional pointer to EEPROM image
+ *  @eeprom_buf_size: size of EEPROM image in words
+ *  @pba_data_size: pointer to output variable
+ *
+ *  Returns the size of the PBA block in words. Function operates on EEPROM
+ *  image if the eeprom_buf pointer is not NULL otherwise it accesses physical
+ *  EEPROM device.
+ *
+ **/
+s32 igc_get_pba_block_size(struct igc_hw *hw, u16 *eeprom_buf,
+			     u32 eeprom_buf_size, u16 *pba_block_size)
+{
+	s32 ret_val;
+	u16 pba_word[2];
+	u16 length;
+
+	DEBUGFUNC("igc_get_pba_block_size");
+
+	if (eeprom_buf == NULL) {
+		ret_val = igc_read_nvm(hw, NVM_PBA_OFFSET_0, 2, &pba_word[0]);
+		if (ret_val)
+			return ret_val;
+	} else {
+		if (eeprom_buf_size > NVM_PBA_OFFSET_1) {
+			pba_word[0] = eeprom_buf[NVM_PBA_OFFSET_0];
+			pba_word[1] = eeprom_buf[NVM_PBA_OFFSET_1];
+		} else {
+			return -IGC_ERR_PARAM;
+		}
+	}
+
+	if (pba_word[0] == NVM_PBA_PTR_GUARD) {
+		if (eeprom_buf == NULL) {
+			ret_val = igc_read_nvm(hw, pba_word[1] + 0, 1,
+						 &length);
+			if (ret_val)
+				return ret_val;
+		} else {
+			if (eeprom_buf_size > pba_word[1])
+				length = eeprom_buf[pba_word[1] + 0];
+			else
+				return -IGC_ERR_PARAM;
+		}
+
+		if (length == 0xFFFF || length == 0)
+			return -IGC_ERR_NVM_PBA_SECTION;
+	} else {
+		/* PBA number in legacy format, there is no PBA Block. */
+		length = 0;
+	}
+
+	if (pba_block_size != NULL)
+		*pba_block_size = length;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_mac_addr_generic - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the EEPROM and stores the value.
+ *  Since devices with two ports use the same EEPROM, we increment the
+ *  last bit in the MAC address for the second port.
+ **/
+s32 igc_read_mac_addr_generic(struct igc_hw *hw)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = IGC_READ_REG(hw, IGC_RAH(0));
+	rar_low = IGC_READ_REG(hw, IGC_RAL(0));
+
+	for (i = 0; i < IGC_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i * 8));
+
+	for (i = 0; i < IGC_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i + 4] = (u8)(rar_high >> (i * 8));
+
+	for (i = 0; i < ETH_ADDR_LEN; i++)
+		hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_validate_nvm_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igc_validate_nvm_checksum_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("igc_validate_nvm_checksum_generic");
+
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16)NVM_SUM) {
+		DEBUGOUT("NVM Checksum Invalid\n");
+		return -IGC_ERR_NVM;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_update_nvm_checksum_generic - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 igc_update_nvm_checksum_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	DEBUGFUNC("igc_update_nvm_checksum");
+
+	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			DEBUGOUT("NVM Read Error while updating checksum.\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16)NVM_SUM - checksum;
+	ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+	if (ret_val)
+		DEBUGOUT("NVM Write Error while updating checksum.\n");
+
+	return ret_val;
+}
+
+/**
+ *  igc_reload_nvm_generic - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+static void igc_reload_nvm_generic(struct igc_hw *hw)
+{
+	u32 ctrl_ext;
+
+	DEBUGFUNC("igc_reload_nvm_generic");
+
+	usec_delay(10);
+	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
+	ctrl_ext |= IGC_CTRL_EXT_EE_RST;
+	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext);
+	IGC_WRITE_FLUSH(hw);
+}
+
+/**
+ *  igc_get_fw_version - Get firmware version information
+ *  @hw: pointer to the HW structure
+ *  @fw_vers: pointer to output version structure
+ *
+ *  unsupported/not present features return 0 in version structure
+ **/
+void igc_get_fw_version(struct igc_hw *hw, struct igc_fw_version *fw_vers)
+{
+	u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
+	u8 q, hval, rem, result;
+	u16 comb_verh, comb_verl, comb_offset;
+
+	memset(fw_vers, 0, sizeof(struct igc_fw_version));
+
+	/*
+	 * basic eeprom version numbers, bits used vary by part and by tool
+	 * used to create the nvm images. Check which data format we have.
+	 */
+	switch (hw->mac.type) {
+	case igc_i225:
+		hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+		/* find combo image version */
+		hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
+		if (comb_offset && comb_offset != NVM_VER_INVALID) {
+			hw->nvm.ops.read(hw, NVM_COMB_VER_OFF + comb_offset + 1,
+					1, &comb_verh);
+			hw->nvm.ops.read(hw, NVM_COMB_VER_OFF + comb_offset,
+					1, &comb_verl);
+
+			/* get Option Rom version if it exists and is valid */
+			if (comb_verh && comb_verl &&
+					comb_verh != NVM_VER_INVALID &&
+					comb_verl != NVM_VER_INVALID) {
+				fw_vers->or_valid = true;
+				fw_vers->or_major = comb_verl >>
+						NVM_COMB_VER_SHFT;
+				fw_vers->or_build = (comb_verl <<
+						NVM_COMB_VER_SHFT) |
+						(comb_verh >>
+						NVM_COMB_VER_SHFT);
+				fw_vers->or_patch = comb_verh &
+						NVM_COMB_VER_MASK;
+			}
+		}
+		break;
+	default:
+		hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+		return;
+	}
+	hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+	fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+			      >> NVM_MAJOR_SHIFT;
+
+	/* check for old style version format in newer images*/
+	if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
+		eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
+	} else {
+		eeprom_verl = (fw_version & NVM_MINOR_MASK)
+				>> NVM_MINOR_SHIFT;
+	}
+	/* Convert minor value to hex before assigning to output struct
+	 * Val to be converted will not be higher than 99, per tool output
+	 */
+	q = eeprom_verl / NVM_HEX_CONV;
+	hval = q * NVM_HEX_TENS;
+	rem = eeprom_verl % NVM_HEX_CONV;
+	result = hval + rem;
+	fw_vers->eep_minor = result;
+
+	if ((etrack_test &  NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
+		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
+		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
+		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
+			| eeprom_verl;
+	} else if ((etrack_test & NVM_ETRACK_VALID) == 0) {
+		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verh);
+		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verl);
+		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) |
+				     eeprom_verl;
+	}
+}
diff --git a/drivers/net/igc/base/igc_nvm.h b/drivers/net/igc/base/igc_nvm.h
new file mode 100644
index 0000000..5e66547
--- /dev/null
+++ b/drivers/net/igc/base/igc_nvm.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_NVM_H_
+#define _IGC_NVM_H_
+
+struct igc_pba {
+	u16 word[2];
+	u16 *pba_block;
+};
+
+struct igc_fw_version {
+	u32 etrack_id;
+	u16 eep_major;
+	u16 eep_minor;
+	u16 eep_build;
+
+	u8 invm_major;
+	u8 invm_minor;
+	u8 invm_img_type;
+
+	bool or_valid;
+	u16 or_major;
+	u16 or_build;
+	u16 or_patch;
+};
+
+
+void igc_init_nvm_ops_generic(struct igc_hw *hw);
+s32  igc_null_read_nvm(struct igc_hw *hw, u16 a, u16 b, u16 *c);
+void igc_null_nvm_generic(struct igc_hw *hw);
+s32  igc_null_led_default(struct igc_hw *hw, u16 *data);
+s32  igc_null_write_nvm(struct igc_hw *hw, u16 a, u16 b, u16 *c);
+s32  igc_acquire_nvm_generic(struct igc_hw *hw);
+
+s32  igc_poll_eerd_eewr_done(struct igc_hw *hw, int ee_reg);
+s32  igc_read_mac_addr_generic(struct igc_hw *hw);
+s32  igc_read_pba_num_generic(struct igc_hw *hw, u32 *pba_num);
+s32  igc_read_pba_string_generic(struct igc_hw *hw, u8 *pba_num,
+				   u32 pba_num_size);
+s32  igc_read_pba_length_generic(struct igc_hw *hw, u32 *pba_num_size);
+s32 igc_read_pba_raw(struct igc_hw *hw, u16 *eeprom_buf,
+		       u32 eeprom_buf_size, u16 max_pba_block_size,
+		       struct igc_pba *pba);
+s32 igc_write_pba_raw(struct igc_hw *hw, u16 *eeprom_buf,
+			u32 eeprom_buf_size, struct igc_pba *pba);
+s32 igc_get_pba_block_size(struct igc_hw *hw, u16 *eeprom_buf,
+			     u32 eeprom_buf_size, u16 *pba_block_size);
+s32  igc_read_nvm_spi(struct igc_hw *hw, u16 offset, u16 words, u16 *data);
+s32  igc_read_nvm_microwire(struct igc_hw *hw, u16 offset,
+			      u16 words, u16 *data);
+s32  igc_read_nvm_eerd(struct igc_hw *hw, u16 offset, u16 words,
+			 u16 *data);
+s32  igc_valid_led_default_generic(struct igc_hw *hw, u16 *data);
+s32  igc_validate_nvm_checksum_generic(struct igc_hw *hw);
+s32  igc_write_nvm_microwire(struct igc_hw *hw, u16 offset,
+			       u16 words, u16 *data);
+s32  igc_write_nvm_spi(struct igc_hw *hw, u16 offset, u16 words,
+			 u16 *data);
+s32  igc_update_nvm_checksum_generic(struct igc_hw *hw);
+void igc_stop_nvm(struct igc_hw *hw);
+void igc_release_nvm_generic(struct igc_hw *hw);
+void igc_get_fw_version(struct igc_hw *hw,
+			  struct igc_fw_version *fw_vers);
+
+#define IGC_STM_OPCODE	0xDB00
+
+#endif
diff --git a/drivers/net/igc/base/igc_osdep.c b/drivers/net/igc/base/igc_osdep.c
new file mode 100644
index 0000000..aadcaa6
--- /dev/null
+++ b/drivers/net/igc/base/igc_osdep.c
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019-2020
+ */
+
+#include "igc_api.h"
+
+/*
+ * NOTE: the following routines using the igc
+ * naming style are provided to the shared
+ * code but are OS specific
+ */
+
+void
+igc_write_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value)
+{
+	(void)hw;
+	(void)reg;
+	(void)value;
+}
+
+void
+igc_read_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value)
+{
+	(void)hw;
+	(void)reg;
+	*value = 0;
+}
+
+void
+igc_pci_set_mwi(struct igc_hw *hw)
+{
+	(void)hw;
+}
+
+void
+igc_pci_clear_mwi(struct igc_hw *hw)
+{
+	(void)hw;
+}
+
+/*
+ * Read the PCI Express capabilities
+ */
+int32_t
+igc_read_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value)
+{
+	(void)hw;
+	(void)reg;
+	(void)value;
+	return IGC_NOT_IMPLEMENTED;
+}
+
+/*
+ * Write the PCI Express capabilities
+ */
+int32_t
+igc_write_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value)
+{
+	(void)hw;
+	(void)reg;
+	(void)value;
+
+	return IGC_NOT_IMPLEMENTED;
+}
diff --git a/drivers/net/igc/base/igc_osdep.h b/drivers/net/igc/base/igc_osdep.h
new file mode 100644
index 0000000..798a4b8
--- /dev/null
+++ b/drivers/net/igc/base/igc_osdep.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019-2020
+ */
+
+
+#ifndef _IGC_OSDEP_H_
+#define _IGC_OSDEP_H_
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <string.h>
+#include <stdbool.h>
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_byteorder.h>
+#include <rte_io.h>
+
+#include "../igc_logs.h"
+
+#define DELAY(x) rte_delay_us(x)
+#define usec_delay(x) DELAY(x)
+#define usec_delay_irq(x) DELAY(x)
+#define msec_delay(x) DELAY(1000 * (x))
+#define msec_delay_irq(x) DELAY(1000 * (x))
+
+#define DEBUGFUNC(F)            DEBUGOUT(F "\n")
+#define DEBUGOUT(S, args...)    PMD_DRV_LOG_RAW(DEBUG, S, ##args)
+#define DEBUGOUT1(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT2(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT3(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT6(S, args...)   DEBUGOUT(S, ##args)
+#define DEBUGOUT7(S, args...)   DEBUGOUT(S, ##args)
+
+#define UNREFERENCED_PARAMETER(_p)	(void)(_p)
+#define UNREFERENCED_1PARAMETER(_p)	(void)(_p)
+#define UNREFERENCED_2PARAMETER(_p, _q)	\
+	do {				\
+		(void)(_p);		\
+		(void)(_q);		\
+	} while (0)
+#define UNREFERENCED_3PARAMETER(_p, _q, _r)	\
+	do {					\
+		(void)(_p);			\
+		(void)(_q);			\
+		(void)(_r);			\
+	} while (0)
+#define UNREFERENCED_4PARAMETER(_p, _q, _r, _s)	\
+	do {					\
+		(void)(_p);			\
+		(void)(_q);			\
+		(void)(_r);			\
+		(void)(_s);			\
+	} while (0)
+
+#define	CMD_MEM_WRT_INVALIDATE	0x0010  /* BIT_4 */
+
+/* Mutex used in the shared code */
+#define IGC_MUTEX                     uintptr_t
+#define IGC_MUTEX_INIT(mutex)         (*(mutex) = 0)
+#define IGC_MUTEX_LOCK(mutex)         (*(mutex) = 1)
+#define IGC_MUTEX_UNLOCK(mutex)       (*(mutex) = 0)
+
+typedef uint64_t	u64;
+typedef uint32_t	u32;
+typedef uint16_t	u16;
+typedef uint8_t		u8;
+typedef int64_t		s64;
+typedef int32_t		s32;
+typedef int16_t		s16;
+typedef int8_t		s8;
+
+#define __le16		u16
+#define __le32		u32
+#define __le64		u64
+
+#define IGC_WRITE_FLUSH(a) IGC_READ_REG(a, IGC_STATUS)
+
+#define IGC_PCI_REG(reg)	rte_read32(reg)
+
+#define IGC_PCI_REG16(reg)	rte_read16(reg)
+
+#define IGC_PCI_REG_WRITE(reg, value)			\
+	rte_write32((rte_cpu_to_le_32(value)), reg)
+
+#define IGC_PCI_REG_WRITE_RELAXED(reg, value)		\
+	rte_write32_relaxed((rte_cpu_to_le_32(value)), reg)
+
+#define IGC_PCI_REG_WRITE16(reg, value)		\
+	rte_write16((rte_cpu_to_le_16(value)), reg)
+
+#define IGC_PCI_REG_ADDR(hw, reg) \
+	((volatile uint32_t *)((char *)(hw)->hw_addr + (reg)))
+
+#define IGC_PCI_REG_ARRAY_ADDR(hw, reg, index) \
+	IGC_PCI_REG_ADDR((hw), (reg) + ((index) << 2))
+
+#define IGC_PCI_REG_FLASH_ADDR(hw, reg) \
+	((volatile uint32_t *)((char *)(hw)->flash_address + (reg)))
+
+static inline uint32_t igc_read_addr(volatile void *addr)
+{
+	return rte_le_to_cpu_32(IGC_PCI_REG(addr));
+}
+
+static inline uint16_t igc_read_addr16(volatile void *addr)
+{
+	return rte_le_to_cpu_16(IGC_PCI_REG16(addr));
+}
+
+/* Register READ/WRITE macros */
+
+#define IGC_READ_REG(hw, reg) \
+	igc_read_addr(IGC_PCI_REG_ADDR((hw), (reg)))
+
+#define IGC_READ_REG_LE_VALUE(hw, reg) \
+	rte_read32(IGC_PCI_REG_ADDR((hw), (reg)))
+
+#define IGC_WRITE_REG(hw, reg, value) \
+	IGC_PCI_REG_WRITE(IGC_PCI_REG_ADDR((hw), (reg)), (value))
+
+#define IGC_WRITE_REG_LE_VALUE(hw, reg, value) \
+	rte_write32(value, IGC_PCI_REG_ADDR((hw), (reg)))
+
+#define IGC_READ_REG_ARRAY(hw, reg, index) \
+	IGC_PCI_REG(IGC_PCI_REG_ARRAY_ADDR((hw), (reg), (index)))
+
+#define IGC_WRITE_REG_ARRAY(hw, reg, index, value) \
+	IGC_PCI_REG_WRITE(IGC_PCI_REG_ARRAY_ADDR((hw), (reg), (index)), \
+			(value))
+
+#define IGC_READ_REG_ARRAY_DWORD IGC_READ_REG_ARRAY
+#define IGC_WRITE_REG_ARRAY_DWORD IGC_WRITE_REG_ARRAY
+
+/*
+ * To be able to do IO write, we need to map IO BAR
+ * (bar 2/4 depending on device).
+ * Right now mapping multiple BARs is not supported by DPDK.
+ * Fortunatelly we need it only for legacy hw support.
+ */
+
+#define IGC_WRITE_REG_IO(hw, reg, value) \
+	IGC_WRITE_REG(hw, reg, value)
+
+/*
+ * Tested on I217/I218 chipset.
+ */
+
+#define IGC_READ_FLASH_REG(hw, reg) \
+	igc_read_addr(IGC_PCI_REG_FLASH_ADDR((hw), (reg)))
+
+#define IGC_READ_FLASH_REG16(hw, reg)  \
+	igc_read_addr16(IGC_PCI_REG_FLASH_ADDR((hw), (reg)))
+
+#define IGC_WRITE_FLASH_REG(hw, reg, value)  \
+	IGC_PCI_REG_WRITE(IGC_PCI_REG_FLASH_ADDR((hw), (reg)), (value))
+
+#define IGC_WRITE_FLASH_REG16(hw, reg, value) \
+	IGC_PCI_REG_WRITE16(IGC_PCI_REG_FLASH_ADDR((hw), (reg)), (value))
+
+#endif /* _IGC_OSDEP_H_ */
diff --git a/drivers/net/igc/base/igc_phy.c b/drivers/net/igc/base/igc_phy.c
new file mode 100644
index 0000000..99df5a2
--- /dev/null
+++ b/drivers/net/igc/base/igc_phy.c
@@ -0,0 +1,4422 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#include "igc_api.h"
+
+static s32 igc_wait_autoneg(struct igc_hw *hw);
+static s32 igc_access_phy_wakeup_reg_bm(struct igc_hw *hw, u32 offset,
+					  u16 *data, bool read, bool page_set);
+static u32 igc_get_phy_addr_for_hv_page(u32 page);
+static s32 igc_access_phy_debug_regs_hv(struct igc_hw *hw, u32 offset,
+					  u16 *data, bool read);
+
+/* Cable length tables */
+static const u16 igc_m88_cable_length_table[] = {
+	0, 50, 80, 110, 140, 140, IGC_CABLE_LENGTH_UNDEFINED };
+#define M88IGC_CABLE_LENGTH_TABLE_SIZE \
+		(sizeof(igc_m88_cable_length_table) / \
+		 sizeof(igc_m88_cable_length_table[0]))
+
+static const u16 igc_igp_2_cable_length_table[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+	124};
+#define IGP02IGC_CABLE_LENGTH_TABLE_SIZE \
+		(sizeof(igc_igp_2_cable_length_table) / \
+		 sizeof(igc_igp_2_cable_length_table[0]))
+
+/**
+ *  igc_init_phy_ops_generic - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups up the function pointers to no-op functions
+ **/
+void igc_init_phy_ops_generic(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	DEBUGFUNC("igc_init_phy_ops_generic");
+
+	/* Initialize function pointers */
+	phy->ops.init_params = igc_null_ops_generic;
+	phy->ops.acquire = igc_null_ops_generic;
+	phy->ops.check_polarity = igc_null_ops_generic;
+	phy->ops.check_reset_block = igc_null_ops_generic;
+	phy->ops.commit = igc_null_ops_generic;
+	phy->ops.force_speed_duplex = igc_null_ops_generic;
+	phy->ops.get_cfg_done = igc_null_ops_generic;
+	phy->ops.get_cable_length = igc_null_ops_generic;
+	phy->ops.get_info = igc_null_ops_generic;
+	phy->ops.set_page = igc_null_set_page;
+	phy->ops.read_reg = igc_null_read_reg;
+	phy->ops.read_reg_locked = igc_null_read_reg;
+	phy->ops.read_reg_page = igc_null_read_reg;
+	phy->ops.release = igc_null_phy_generic;
+	phy->ops.reset = igc_null_ops_generic;
+	phy->ops.set_d0_lplu_state = igc_null_lplu_state;
+	phy->ops.set_d3_lplu_state = igc_null_lplu_state;
+	phy->ops.write_reg = igc_null_write_reg;
+	phy->ops.write_reg_locked = igc_null_write_reg;
+	phy->ops.write_reg_page = igc_null_write_reg;
+	phy->ops.power_up = igc_null_phy_generic;
+	phy->ops.power_down = igc_null_phy_generic;
+	phy->ops.read_i2c_byte = igc_read_i2c_byte_null;
+	phy->ops.write_i2c_byte = igc_write_i2c_byte_null;
+	phy->ops.cfg_on_link_up = igc_null_ops_generic;
+}
+
+/**
+ *  igc_null_set_page - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @data: dummy variable
+ **/
+s32 igc_null_set_page(struct igc_hw IGC_UNUSEDARG * hw,
+			u16 IGC_UNUSEDARG data)
+{
+	DEBUGFUNC("igc_null_set_page");
+	UNREFERENCED_2PARAMETER(hw, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_read_reg - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @offset: dummy variable
+ *  @data: dummy variable
+ **/
+s32 igc_null_read_reg(struct igc_hw IGC_UNUSEDARG * hw,
+			u32 IGC_UNUSEDARG offset, u16 IGC_UNUSEDARG * data)
+{
+	DEBUGFUNC("igc_null_read_reg");
+	UNREFERENCED_3PARAMETER(hw, offset, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_phy_generic - No-op function, return void
+ *  @hw: pointer to the HW structure
+ **/
+void igc_null_phy_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_null_phy_generic");
+	UNREFERENCED_1PARAMETER(hw);
+}
+
+/**
+ *  igc_null_lplu_state - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @active: dummy variable
+ **/
+s32 igc_null_lplu_state(struct igc_hw IGC_UNUSEDARG * hw,
+			  bool IGC_UNUSEDARG active)
+{
+	DEBUGFUNC("igc_null_lplu_state");
+	UNREFERENCED_2PARAMETER(hw, active);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_null_write_reg - No-op function, return 0
+ *  @hw: pointer to the HW structure
+ *  @offset: dummy variable
+ *  @data: dummy variable
+ **/
+s32 igc_null_write_reg(struct igc_hw IGC_UNUSEDARG * hw,
+			 u32 IGC_UNUSEDARG offset, u16 IGC_UNUSEDARG data)
+{
+	DEBUGFUNC("igc_null_write_reg");
+	UNREFERENCED_3PARAMETER(hw, offset, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_i2c_byte_null - No-op function, return 0
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: data value read
+ *
+ **/
+s32 igc_read_i2c_byte_null(struct igc_hw IGC_UNUSEDARG * hw,
+			     u8 IGC_UNUSEDARG byte_offset,
+			     u8 IGC_UNUSEDARG dev_addr,
+			     u8 IGC_UNUSEDARG * data)
+{
+	DEBUGFUNC("igc_read_i2c_byte_null");
+	UNREFERENCED_4PARAMETER(hw, byte_offset, dev_addr, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_i2c_byte_null - No-op function, return 0
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: data value to write
+ *
+ **/
+s32 igc_write_i2c_byte_null(struct igc_hw IGC_UNUSEDARG * hw,
+			      u8 IGC_UNUSEDARG byte_offset,
+			      u8 IGC_UNUSEDARG dev_addr,
+			      u8 IGC_UNUSEDARG data)
+{
+	DEBUGFUNC("igc_write_i2c_byte_null");
+	UNREFERENCED_4PARAMETER(hw, byte_offset, dev_addr, data);
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_check_reset_block_generic - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the PHY management control register and check whether a PHY reset
+ *  is blocked.  If a reset is not blocked return IGC_SUCCESS, otherwise
+ *  return IGC_BLK_PHY_RESET (12).
+ **/
+s32 igc_check_reset_block_generic(struct igc_hw *hw)
+{
+	u32 manc;
+
+	DEBUGFUNC("igc_check_reset_block");
+
+	manc = IGC_READ_REG(hw, IGC_MANC);
+
+	return (manc & IGC_MANC_BLK_PHY_RST_ON_IDE) ?
+	       IGC_BLK_PHY_RESET : IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_phy_id - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+s32 igc_get_phy_id(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val = IGC_SUCCESS;
+	u16 phy_id;
+	u16 retry_count = 0;
+
+	DEBUGFUNC("igc_get_phy_id");
+
+	if (!phy->ops.read_reg)
+		return IGC_SUCCESS;
+
+	while (retry_count < 2) {
+		ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id = (u32)(phy_id << 16);
+		usec_delay(20);
+		ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
+			return IGC_SUCCESS;
+
+		retry_count++;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_reset_dsp_generic - Reset PHY DSP
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the digital signal processor.
+ **/
+s32 igc_phy_reset_dsp_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_phy_reset_dsp_generic");
+
+	if (!hw->phy.ops.write_reg)
+		return IGC_SUCCESS;
+
+	ret_val = hw->phy.ops.write_reg(hw, M88IGC_PHY_GEN_CONTROL, 0xC1);
+	if (ret_val)
+		return ret_val;
+
+	return hw->phy.ops.write_reg(hw, M88IGC_PHY_GEN_CONTROL, 0);
+}
+
+/**
+ *  igc_read_phy_reg_mdic - Read MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 igc_read_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	DEBUGFUNC("igc_read_phy_reg_mdic");
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", offset);
+		return -IGC_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = ((offset << IGC_MDIC_REG_SHIFT) |
+		(phy->addr << IGC_MDIC_PHY_SHIFT) |
+		(IGC_MDIC_OP_READ));
+
+	IGC_WRITE_REG(hw, IGC_MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (IGC_GEN_POLL_TIMEOUT * 3); i++) {
+		usec_delay_irq(50);
+		mdic = IGC_READ_REG(hw, IGC_MDIC);
+		if (mdic & IGC_MDIC_READY)
+			break;
+	}
+	if (!(mdic & IGC_MDIC_READY)) {
+		DEBUGOUT("MDI Read did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (mdic & IGC_MDIC_ERROR) {
+		DEBUGOUT("MDI Error\n");
+		return -IGC_ERR_PHY;
+	}
+	if (((mdic & IGC_MDIC_REG_MASK) >> IGC_MDIC_REG_SHIFT) != offset) {
+		DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n",
+			  offset,
+			  (mdic & IGC_MDIC_REG_MASK) >> IGC_MDIC_REG_SHIFT);
+		return -IGC_ERR_PHY;
+	}
+	*data = (u16)mdic;
+
+	/* Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == igc_pch2lan)
+		usec_delay_irq(100);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_phy_reg_mdic - Write MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+s32 igc_write_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 data)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	DEBUGFUNC("igc_write_phy_reg_mdic");
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		DEBUGOUT1("PHY Address %d is out of range\n", offset);
+		return -IGC_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = (((u32)data) |
+		(offset << IGC_MDIC_REG_SHIFT) |
+		(phy->addr << IGC_MDIC_PHY_SHIFT) |
+		(IGC_MDIC_OP_WRITE));
+
+	IGC_WRITE_REG(hw, IGC_MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (IGC_GEN_POLL_TIMEOUT * 3); i++) {
+		usec_delay_irq(50);
+		mdic = IGC_READ_REG(hw, IGC_MDIC);
+		if (mdic & IGC_MDIC_READY)
+			break;
+	}
+	if (!(mdic & IGC_MDIC_READY)) {
+		DEBUGOUT("MDI Write did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (mdic & IGC_MDIC_ERROR) {
+		DEBUGOUT("MDI Error\n");
+		return -IGC_ERR_PHY;
+	}
+	if (((mdic & IGC_MDIC_REG_MASK) >> IGC_MDIC_REG_SHIFT) != offset) {
+		DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n",
+			  offset,
+			  (mdic & IGC_MDIC_REG_MASK) >> IGC_MDIC_REG_SHIFT);
+		return -IGC_ERR_PHY;
+	}
+
+	/* Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == igc_pch2lan)
+		usec_delay_irq(100);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_phy_reg_i2c - Read PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the i2c interface and stores the
+ *  retrieved information in data.
+ **/
+s32 igc_read_phy_reg_i2c(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+
+	DEBUGFUNC("igc_read_phy_reg_i2c");
+
+	/* Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << IGC_I2CCMD_REG_ADDR_SHIFT) |
+		  (phy->addr << IGC_I2CCMD_PHY_ADDR_SHIFT) |
+		  (IGC_I2CCMD_OPCODE_READ));
+
+	IGC_WRITE_REG(hw, IGC_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < IGC_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		i2ccmd = IGC_READ_REG(hw, IGC_I2CCMD);
+		if (i2ccmd & IGC_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & IGC_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Read did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (i2ccmd & IGC_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -IGC_ERR_PHY;
+	}
+
+	/* Need to byte-swap the 16-bit value. */
+	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_phy_reg_i2c - Write PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igc_write_phy_reg_i2c(struct igc_hw *hw, u32 offset, u16 data)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+	u16 phy_data_swapped;
+
+	DEBUGFUNC("igc_write_phy_reg_i2c");
+
+	/* Prevent overwriting SFP I2C EEPROM which is at A0 address. */
+	if (hw->phy.addr == 0 || hw->phy.addr > 7) {
+		DEBUGOUT1("PHY I2C Address %d is out of range.\n",
+			hw->phy.addr);
+		return -IGC_ERR_CONFIG;
+	}
+
+	/* Swap the data bytes for the I2C interface */
+	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+	/* Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << IGC_I2CCMD_REG_ADDR_SHIFT) |
+		  (phy->addr << IGC_I2CCMD_PHY_ADDR_SHIFT) |
+		  IGC_I2CCMD_OPCODE_WRITE |
+		  phy_data_swapped);
+
+	IGC_WRITE_REG(hw, IGC_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < IGC_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		i2ccmd = IGC_READ_REG(hw, IGC_I2CCMD);
+		if (i2ccmd & IGC_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & IGC_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Write did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (i2ccmd & IGC_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -IGC_ERR_PHY;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_sfp_data_byte - Reads SFP module data.
+ *  @hw: pointer to the HW structure
+ *  @offset: byte location offset to be read
+ *  @data: read data buffer pointer
+ *
+ *  Reads one byte from SFP module data stored
+ *  in SFP resided EEPROM memory or SFP diagnostic area.
+ *  Function should be called with
+ *  IGC_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ *  IGC_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ *  access
+ **/
+s32 igc_read_sfp_data_byte(struct igc_hw *hw, u16 offset, u8 *data)
+{
+	u32 i = 0;
+	u32 i2ccmd = 0;
+	u32 data_local = 0;
+
+	DEBUGFUNC("igc_read_sfp_data_byte");
+
+	if (offset > IGC_I2CCMD_SFP_DIAG_ADDR(255)) {
+		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
+		return -IGC_ERR_PHY;
+	}
+
+	/* Set up Op-code, EEPROM Address,in the I2CCMD
+	 * register. The MAC will take care of interfacing with the
+	 * EEPROM to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << IGC_I2CCMD_REG_ADDR_SHIFT) |
+		  IGC_I2CCMD_OPCODE_READ);
+
+	IGC_WRITE_REG(hw, IGC_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < IGC_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		data_local = IGC_READ_REG(hw, IGC_I2CCMD);
+		if (data_local & IGC_I2CCMD_READY)
+			break;
+	}
+	if (!(data_local & IGC_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Read did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (data_local & IGC_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -IGC_ERR_PHY;
+	}
+	*data = (u8)data_local & 0xFF;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_sfp_data_byte - Writes SFP module data.
+ *  @hw: pointer to the HW structure
+ *  @offset: byte location offset to write to
+ *  @data: data to write
+ *
+ *  Writes one byte to SFP module data stored
+ *  in SFP resided EEPROM memory or SFP diagnostic area.
+ *  Function should be called with
+ *  IGC_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ *  IGC_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ *  access
+ **/
+s32 igc_write_sfp_data_byte(struct igc_hw *hw, u16 offset, u8 data)
+{
+	u32 i = 0;
+	u32 i2ccmd = 0;
+	u32 data_local = 0;
+
+	DEBUGFUNC("igc_write_sfp_data_byte");
+
+	if (offset > IGC_I2CCMD_SFP_DIAG_ADDR(255)) {
+		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
+		return -IGC_ERR_PHY;
+	}
+	/* The programming interface is 16 bits wide
+	 * so we need to read the whole word first
+	 * then update appropriate byte lane and write
+	 * the updated word back.
+	 */
+	/* Set up Op-code, EEPROM Address,in the I2CCMD
+	 * register. The MAC will take care of interfacing
+	 * with an EEPROM to write the data given.
+	 */
+	i2ccmd = ((offset << IGC_I2CCMD_REG_ADDR_SHIFT) |
+		  IGC_I2CCMD_OPCODE_READ);
+	/* Set a command to read single word */
+	IGC_WRITE_REG(hw, IGC_I2CCMD, i2ccmd);
+	for (i = 0; i < IGC_I2CCMD_PHY_TIMEOUT; i++) {
+		usec_delay(50);
+		/* Poll the ready bit to see if lastly
+		 * launched I2C operation completed
+		 */
+		i2ccmd = IGC_READ_REG(hw, IGC_I2CCMD);
+		if (i2ccmd & IGC_I2CCMD_READY) {
+			/* Check if this is READ or WRITE phase */
+			if ((i2ccmd & IGC_I2CCMD_OPCODE_READ) ==
+			    IGC_I2CCMD_OPCODE_READ) {
+				/* Write the selected byte
+				 * lane and update whole word
+				 */
+				data_local = i2ccmd & 0xFF00;
+				data_local |= (u32)data;
+				i2ccmd = ((offset <<
+					IGC_I2CCMD_REG_ADDR_SHIFT) |
+					IGC_I2CCMD_OPCODE_WRITE | data_local);
+				IGC_WRITE_REG(hw, IGC_I2CCMD, i2ccmd);
+			} else {
+				break;
+			}
+		}
+	}
+	if (!(i2ccmd & IGC_I2CCMD_READY)) {
+		DEBUGOUT("I2CCMD Write did not complete\n");
+		return -IGC_ERR_PHY;
+	}
+	if (i2ccmd & IGC_I2CCMD_ERROR) {
+		DEBUGOUT("I2CCMD Error bit set\n");
+		return -IGC_ERR_PHY;
+	}
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_phy_reg_m88 - Read m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 igc_read_phy_reg_m88(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_read_phy_reg_m88");
+
+	if (!hw->phy.ops.acquire)
+		return IGC_SUCCESS;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					  data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_write_phy_reg_m88 - Write m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_m88(struct igc_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_write_phy_reg_m88");
+
+	if (!hw->phy.ops.acquire)
+		return IGC_SUCCESS;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_set_page_igp - Set page as on IGP-like PHY(s)
+ *  @hw: pointer to the HW structure
+ *  @page: page to set (shifted left when necessary)
+ *
+ *  Sets PHY page required for PHY register access.  Assumes semaphore is
+ *  already acquired.  Note, this function sets phy.addr to 1 so the caller
+ *  must set it appropriately (if necessary) after this function returns.
+ **/
+s32 igc_set_page_igp(struct igc_hw *hw, u16 page)
+{
+	DEBUGFUNC("igc_set_page_igp");
+
+	DEBUGOUT1("Setting page 0x%x\n", page);
+
+	hw->phy.addr = 1;
+
+	return igc_write_phy_reg_mdic(hw, IGP01IGC_PHY_PAGE_SELECT, page);
+}
+
+/**
+ *  __igc_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and stores the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+static s32 __igc_read_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 *data,
+				    bool locked)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("__igc_read_phy_reg_igp");
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return IGC_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = igc_write_phy_reg_mdic(hw,
+						   IGP01IGC_PHY_PAGE_SELECT,
+						   (u16)offset);
+	if (!ret_val)
+		ret_val = igc_read_phy_reg_mdic(hw,
+						  MAX_PHY_REG_ADDRESS & offset,
+						  data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores the
+ *  retrieved information in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 igc_read_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  igc_read_phy_reg_igp_locked - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 igc_read_phy_reg_igp_locked(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  igc_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+static s32 __igc_write_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 data,
+				     bool locked)
+{
+	s32 ret_val = IGC_SUCCESS;
+
+	DEBUGFUNC("igc_write_phy_reg_igp");
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return IGC_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = igc_write_phy_reg_mdic(hw,
+						   IGP01IGC_PHY_PAGE_SELECT,
+						   (u16)offset);
+	if (!ret_val)
+		ret_val = igc_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
+						       offset,
+						   data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  igc_write_phy_reg_igp_locked - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.
+ *  Assumes semaphore already acquired.
+ **/
+s32 igc_write_phy_reg_igp_locked(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  __igc_read_kmrn_reg - Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then reads the PHY register at offset
+ *  using the kumeran interface.  The information retrieved is stored in data.
+ *  Release any acquired semaphores before exiting.
+ **/
+static s32 __igc_read_kmrn_reg(struct igc_hw *hw, u32 offset, u16 *data,
+				 bool locked)
+{
+	u32 kmrnctrlsta;
+
+	DEBUGFUNC("__igc_read_kmrn_reg");
+
+	if (!locked) {
+		s32 ret_val = IGC_SUCCESS;
+
+		if (!hw->phy.ops.acquire)
+			return IGC_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << IGC_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       IGC_KMRNCTRLSTA_OFFSET) | IGC_KMRNCTRLSTA_REN;
+	IGC_WRITE_REG(hw, IGC_KMRNCTRLSTA, kmrnctrlsta);
+	IGC_WRITE_FLUSH(hw);
+
+	usec_delay(2);
+
+	kmrnctrlsta = IGC_READ_REG(hw, IGC_KMRNCTRLSTA);
+	*data = (u16)kmrnctrlsta;
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_read_kmrn_reg_generic -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset using the
+ *  kumeran interface.  The information retrieved is stored in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 igc_read_kmrn_reg_generic(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  igc_read_kmrn_reg_locked -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the kumeran interface.  The
+ *  information retrieved is stored in data.
+ *  Assumes semaphore already acquired.
+ **/
+s32 igc_read_kmrn_reg_locked(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  __igc_write_kmrn_reg - Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then write the data to PHY register
+ *  at the offset using the kumeran interface.  Release any acquired semaphores
+ *  before exiting.
+ **/
+static s32 __igc_write_kmrn_reg(struct igc_hw *hw, u32 offset, u16 data,
+				  bool locked)
+{
+	u32 kmrnctrlsta;
+
+	DEBUGFUNC("igc_write_kmrn_reg_generic");
+
+	if (!locked) {
+		s32 ret_val = IGC_SUCCESS;
+
+		if (!hw->phy.ops.acquire)
+			return IGC_SUCCESS;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << IGC_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       IGC_KMRNCTRLSTA_OFFSET) | data;
+	IGC_WRITE_REG(hw, IGC_KMRNCTRLSTA, kmrnctrlsta);
+	IGC_WRITE_FLUSH(hw);
+
+	usec_delay(2);
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_kmrn_reg_generic -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to the PHY register at the offset
+ *  using the kumeran interface.  Release the acquired semaphore before exiting.
+ **/
+s32 igc_write_kmrn_reg_generic(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  igc_write_kmrn_reg_locked -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Write the data to PHY register at the offset using the kumeran interface.
+ *  Assumes semaphore already acquired.
+ **/
+s32 igc_write_kmrn_reg_locked(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  igc_set_master_slave_mode - Setup PHY for Master/slave mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Master/slave mode
+ **/
+static s32 igc_set_master_slave_mode(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Resolve Master/Slave mode */
+	ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* load defaults for future use */
+	hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+				   ((phy_data & CR_1000T_MS_VALUE) ?
+				    igc_ms_force_master :
+				    igc_ms_force_slave) : igc_ms_auto;
+
+	switch (hw->phy.ms_type) {
+	case igc_ms_force_master:
+		phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+		break;
+	case igc_ms_force_slave:
+		phy_data |= CR_1000T_MS_ENABLE;
+		phy_data &= ~(CR_1000T_MS_VALUE);
+		break;
+	case igc_ms_auto:
+		phy_data &= ~CR_1000T_MS_ENABLE;
+		/* fall-through */
+	default:
+		break;
+	}
+
+	return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}
+
+/**
+ *  igc_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igc_copper_link_setup_82577(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("igc_copper_link_setup_82577");
+
+	if (hw->phy.type == igc_phy_82580) {
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			DEBUGOUT("Error resetting the PHY.\n");
+			return ret_val;
+		}
+	}
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Set MDI/MDIX mode */
+	ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+	/* Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	return igc_set_master_slave_mode(hw);
+}
+
+/**
+ *  igc_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for m88 PHY's.  If necessary, transmit clock
+ *  and downshift values are set also.
+ **/
+s32 igc_copper_link_setup_m88(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("igc_copper_link_setup_m88");
+
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* For BM PHY this bit is downshift enable */
+	if (phy->type != igc_phy_bm)
+		phy_data |= M88IGC_PSCR_ASSERT_CRS_ON_TX;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88IGC_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88IGC_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88IGC_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		phy_data |= M88IGC_PSCR_AUTO_X_1000T;
+		break;
+	case 0:
+	default:
+		phy_data |= M88IGC_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88IGC_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction)
+		phy_data |= M88IGC_PSCR_POLARITY_REVERSAL;
+
+	/* Enable downshift on BM (disabled by default) */
+	if (phy->type == igc_phy_bm) {
+		/* For 82574/82583, first disable then enable downshift */
+		if (phy->id == BMIGC_E_PHY_ID_R2) {
+			phy_data &= ~BMIGC_PSCR_ENABLE_DOWNSHIFT;
+			ret_val = phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL,
+						     phy_data);
+			if (ret_val)
+				return ret_val;
+			/* Commit the changes. */
+			ret_val = phy->ops.commit(hw);
+			if (ret_val) {
+				DEBUGOUT("Error committing the PHY changes\n");
+				return ret_val;
+			}
+		}
+
+		phy_data |= BMIGC_PSCR_ENABLE_DOWNSHIFT;
+	}
+
+	ret_val = phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->type == igc_phy_m88 && phy->revision < IGC_REVISION_4 &&
+			phy->id != BMIGC_E_PHY_ID_R2) {
+		/* Force TX_CLK in the Extended PHY Specific Control Register
+		 * to 25MHz clock.
+		 */
+		ret_val = phy->ops.read_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88IGC_EPSCR_TX_CLK_25;
+
+		if (phy->revision == IGC_REVISION_2 &&
+				phy->id == M88E1111_I_PHY_ID) {
+			/* 82573L PHY - set the downshift counter to 5x. */
+			phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+		} else {
+			/* Configure Master and Slave downshift values */
+			phy_data &= ~(M88IGC_EPSCR_MASTER_DOWNSHIFT_MASK |
+				     M88IGC_EPSCR_SLAVE_DOWNSHIFT_MASK);
+			phy_data |= (M88IGC_EPSCR_MASTER_DOWNSHIFT_1X |
+				     M88IGC_EPSCR_SLAVE_DOWNSHIFT_1X);
+		}
+		ret_val = phy->ops.write_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (phy->type == igc_phy_bm && phy->id == BMIGC_E_PHY_ID_R2) {
+		/* Set PHY page 0, register 29 to 0x0003 */
+		ret_val = phy->ops.write_reg(hw, 29, 0x0003);
+		if (ret_val)
+			return ret_val;
+
+		/* Set PHY page 0, register 30 to 0x0000 */
+		ret_val = phy->ops.write_reg(hw, 30, 0x0000);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Commit the changes. */
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	if (phy->type == igc_phy_82578) {
+		ret_val = phy->ops.read_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* 82578 PHY - set the downshift count to 1x. */
+		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
+		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
+		ret_val = phy->ops.write_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ *  Also enables and sets the downshift parameters.
+ **/
+s32 igc_copper_link_setup_m88_gen2(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	DEBUGFUNC("igc_copper_link_setup_m88_gen2");
+
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88IGC_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88IGC_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88IGC_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		/* M88E1112 does not support this mode) */
+		if (phy->id != M88E1112_E_PHY_ID) {
+			phy_data |= M88IGC_PSCR_AUTO_X_1000T;
+			break;
+		}
+		/* Fall through */
+	case 0:
+	default:
+		phy_data |= M88IGC_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88IGC_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction)
+		phy_data |= M88IGC_PSCR_POLARITY_REVERSAL;
+
+	/* Enable downshift and setting it to X6 */
+	if (phy->id == M88E1543_E_PHY_ID) {
+		phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE;
+		ret_val =
+		    phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.commit(hw);
+		if (ret_val) {
+			DEBUGOUT("Error committing the PHY changes\n");
+			return ret_val;
+		}
+	}
+
+	phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+	phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+	ret_val = phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Commit the changes. */
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	ret_val = igc_set_master_slave_mode(hw);
+	if (ret_val)
+		return ret_val;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_copper_link_setup_igp - Setup igp PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ *  igp PHY's.
+ **/
+s32 igc_copper_link_setup_igp(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("igc_copper_link_setup_igp");
+
+
+	ret_val = hw->phy.ops.reset(hw);
+	if (ret_val) {
+		DEBUGOUT("Error resetting the PHY.\n");
+		return ret_val;
+	}
+
+	/* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+	 * timeout issues when LFS is enabled.
+	 */
+	msec_delay(100);
+
+	/* The NVM settings will configure LPLU in D3 for
+	 * non-IGP1 PHYs.
+	 */
+	if (phy->type == igc_phy_igp) {
+		/* disable lplu d3 during driver init */
+		ret_val = hw->phy.ops.set_d3_lplu_state(hw, false);
+		if (ret_val) {
+			DEBUGOUT("Error Disabling LPLU D3\n");
+			return ret_val;
+		}
+	}
+
+	/* disable lplu d0 during driver init */
+	if (hw->phy.ops.set_d0_lplu_state) {
+		ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+		if (ret_val) {
+			DEBUGOUT("Error Disabling LPLU D0\n");
+			return ret_val;
+		}
+	}
+	/* Configure mdi-mdix settings */
+	ret_val = phy->ops.read_reg(hw, IGP01IGC_PHY_PORT_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IGP01IGC_PSCR_AUTO_MDIX;
+
+	switch (phy->mdix) {
+	case 1:
+		data &= ~IGP01IGC_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 2:
+		data |= IGP01IGC_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 0:
+	default:
+		data |= IGP01IGC_PSCR_AUTO_MDIX;
+		break;
+	}
+	ret_val = phy->ops.write_reg(hw, IGP01IGC_PHY_PORT_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* set auto-master slave resolution settings */
+	if (hw->mac.autoneg) {
+		/* when autonegotiation advertisement is only 1000Mbps then we
+		 * should disable SmartSpeed and enable Auto MasterSlave
+		 * resolution as hardware default.
+		 */
+		if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+			/* Disable SmartSpeed */
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01IGC_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01IGC_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01IGC_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+
+			/* Set auto Master/Slave resolution process */
+			ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~CR_1000T_MS_ENABLE;
+			ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+			if (ret_val)
+				return ret_val;
+		}
+
+		ret_val = igc_set_master_slave_mode(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_setup_autoneg - Configure PHY for auto-negotiation
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MII auto-neg advertisement register and/or the 1000T control
+ *  register and if the PHY is already setup for auto-negotiation, then
+ *  return successful.  Otherwise, setup advertisement and flow control to
+ *  the appropriate values for the wanted auto-negotiation.
+ **/
+s32 igc_phy_setup_autoneg(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg = 0;
+	u16 aneg_multigbt_an_ctrl = 0;
+
+	DEBUGFUNC("igc_phy_setup_autoneg");
+
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+		/* Read the MII 1000Base-T Control Register (Address 9). */
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+					    &mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
+	    hw->phy.id == I225_I_PHY_ID) {
+	/* Read the MULTI GBT AN Control Register - reg 7.32 */
+		ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+					    MMD_DEVADDR_SHIFT) |
+					    ANEG_MULTIGBT_AN_CTRL,
+					    &aneg_multigbt_an_ctrl);
+
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Need to parse both autoneg_advertised and fc and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+				 NWAY_AR_100TX_HD_CAPS |
+				 NWAY_AR_10T_FD_CAPS   |
+				 NWAY_AR_10T_HD_CAPS);
+	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+	DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+	/* Do we want to advertise 10 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+		DEBUGOUT("Advertise 10mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+	}
+
+	/* Do we want to advertise 10 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+		DEBUGOUT("Advertise 10mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+		DEBUGOUT("Advertise 100mb Half duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+	}
+
+	/* Do we want to advertise 100 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+		DEBUGOUT("Advertise 100mb Full duplex\n");
+		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+	}
+
+	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+		DEBUGOUT("Advertise 1000mb Half duplex request denied!\n");
+
+	/* Do we want to advertise 1000 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+		DEBUGOUT("Advertise 1000mb Full duplex\n");
+		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+	}
+
+	/* We do not allow the Phy to advertise 2500 Mb Half Duplex */
+	if (phy->autoneg_advertised & ADVERTISE_2500_HALF)
+		DEBUGOUT("Advertise 2500mb Half duplex request denied!\n");
+
+	/* Do we want to advertise 2500 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_2500_FULL) {
+		DEBUGOUT("Advertise 2500mb Full duplex\n");
+		aneg_multigbt_an_ctrl |= CR_2500T_FD_CAPS;
+	} else {
+		aneg_multigbt_an_ctrl &= ~CR_2500T_FD_CAPS;
+	}
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the PHY advertisement registers accordingly.  If
+	 * auto-negotiation is enabled, then software will have to set the
+	 * "PAUSE" bits to the correct value in the Auto-Negotiation
+	 * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+	 * negotiation.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          but we do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 *  other:  No software override.  The flow control configuration
+	 *          in the EEPROM is used.
+	 */
+	switch (hw->fc.current_mode) {
+	case igc_fc_none:
+		/* Flow control (Rx & Tx) is completely disabled by a
+		 * software over-ride.
+		 */
+		mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case igc_fc_rx_pause:
+		/* Rx Flow control is enabled, and Tx Flow control is
+		 * disabled, by a software over-ride.
+		 *
+		 * Since there really isn't a way to advertise that we are
+		 * capable of Rx Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric Rx PAUSE.  Later
+		 * (in igc_config_fc_after_link_up) we will disable the
+		 * hw's ability to send PAUSE frames.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	case igc_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+		mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+		break;
+	case igc_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+		break;
+	default:
+		DEBUGOUT("Flow control param set incorrectly\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL)
+		ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL,
+					     mii_1000t_ctrl_reg);
+
+	if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
+	    hw->phy.id == I225_I_PHY_ID)
+		ret_val = phy->ops.write_reg(hw,
+					     (STANDARD_AN_REG_MASK <<
+					     MMD_DEVADDR_SHIFT) |
+					     ANEG_MULTIGBT_AN_CTRL,
+					     aneg_multigbt_an_ctrl);
+
+	return ret_val;
+}
+
+/**
+ *  igc_copper_link_autoneg - Setup/Enable autoneg for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs initial bounds checking on autoneg advertisement parameter, then
+ *  configure to advertise the full capability.  Setup the PHY to autoneg
+ *  and restart the negotiation process between the link partner.  If
+ *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+s32 igc_copper_link_autoneg(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	DEBUGFUNC("igc_copper_link_autoneg");
+
+	/* Perform some bounds checking on the autoneg advertisement
+	 * parameter.
+	 */
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* If autoneg_advertised is zero, we assume it was not defaulted
+	 * by the calling code so we set to advertise full capability.
+	 */
+	if (!phy->autoneg_advertised)
+		phy->autoneg_advertised = phy->autoneg_mask;
+
+	DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+	ret_val = igc_phy_setup_autoneg(hw);
+	if (ret_val) {
+		DEBUGOUT("Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	DEBUGOUT("Restarting Auto-Neg\n");
+
+	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
+	 * the Auto Neg Restart bit in the PHY control register.
+	 */
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	/* Does the user want to wait for Auto-Neg to complete here, or
+	 * check at a later time (for example, callback routine).
+	 */
+	if (phy->autoneg_wait_to_complete) {
+		ret_val = igc_wait_autoneg(hw);
+		if (ret_val) {
+			DEBUGOUT("Error while waiting for autoneg to complete\n");
+			return ret_val;
+		}
+	}
+
+	hw->mac.get_link_status = true;
+
+	return ret_val;
+}
+
+/**
+ *  igc_setup_copper_link_generic - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -IGC_ERR_PHY (-2).
+ **/
+s32 igc_setup_copper_link_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+	bool link = false;
+
+	DEBUGFUNC("igc_setup_copper_link_generic");
+
+	if (hw->mac.autoneg) {
+		/* Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = igc_copper_link_autoneg(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		DEBUGOUT("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			DEBUGOUT("Error Forcing Speed and Duplex\n");
+			return ret_val;
+		}
+	}
+
+	/* Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = igc_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+					     &link);
+	if (ret_val)
+		return ret_val;
+
+	if (link) {
+		DEBUGOUT("Valid link established!!!\n");
+		hw->mac.ops.config_collision_dist(hw);
+		ret_val = igc_config_fc_after_link_up_generic(hw);
+	} else {
+		DEBUGOUT("Unable to establish link!!!\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -IGC_ERR_PHY (-2).
+ **/
+s32 igc_phy_force_speed_duplex_igp(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("igc_phy_force_speed_duplex_igp");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	igc_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01IGC_PHY_PORT_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~IGP01IGC_PSCR_AUTO_MDIX;
+	phy_data &= ~IGP01IGC_PSCR_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, IGP01IGC_PHY_PORT_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("IGP PSCR: %X\n", phy_data);
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n");
+
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Resets the PHY to commit the
+ *  changes.  If time expires while waiting for link up, we reset the DSP.
+ *  After reset, TX_CLK and CRS on Tx must be set.  Return successful upon
+ *  successful completion, else return corresponding error code.
+ **/
+s32 igc_phy_force_speed_duplex_m88(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("igc_phy_force_speed_duplex_m88");
+
+	/* I210 and I211 devices support Auto-Crossover in forced operation. */
+	if (phy->type != igc_phy_i210) {
+		/* Clear Auto-Crossover to force MDI manually.  M88E1000
+		 * requires MDI forced whenever speed and duplex are forced.
+		 */
+		ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_CTRL,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data &= ~M88IGC_PSCR_AUTO_X_MODE;
+		ret_val = phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL,
+					     phy_data);
+		if (ret_val)
+			return ret_val;
+
+		DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data);
+	}
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	igc_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Reset the phy to commit changes. */
+	ret_val = hw->phy.ops.commit(hw);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n");
+
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link) {
+			bool reset_dsp = true;
+
+			switch (hw->phy.id) {
+			case I347AT4_E_PHY_ID:
+			case M88E1340M_E_PHY_ID:
+			case M88E1112_E_PHY_ID:
+			case M88E1543_E_PHY_ID:
+			case M88E1512_E_PHY_ID:
+			case I210_I_PHY_ID:
+			/* fall-through */
+			case I225_I_PHY_ID:
+			/* fall-through */
+				reset_dsp = false;
+				break;
+			default:
+				if (hw->phy.type != igc_phy_m88)
+					reset_dsp = false;
+				break;
+			}
+
+			if (!reset_dsp) {
+				DEBUGOUT("Link taking longer than expected.\n");
+			} else {
+				/* We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = phy->ops.write_reg(hw,
+						M88IGC_PHY_PAGE_SELECT,
+						0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = igc_phy_reset_dsp_generic(hw);
+				if (ret_val)
+					return ret_val;
+			}
+		}
+
+		/* Try once more */
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type != igc_phy_m88)
+		return IGC_SUCCESS;
+
+	if (hw->phy.id == I347AT4_E_PHY_ID ||
+		hw->phy.id == M88E1340M_E_PHY_ID ||
+		hw->phy.id == M88E1112_E_PHY_ID)
+		return IGC_SUCCESS;
+	if (hw->phy.id == I210_I_PHY_ID)
+		return IGC_SUCCESS;
+	if (hw->phy.id == I225_I_PHY_ID)
+		return IGC_SUCCESS;
+	if (hw->phy.id == M88E1543_E_PHY_ID || hw->phy.id == M88E1512_E_PHY_ID)
+		return IGC_SUCCESS;
+	ret_val = phy->ops.read_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Resetting the phy means we need to re-force TX_CLK in the
+	 * Extended PHY Specific Control Register to 25MHz clock from
+	 * the reset value of 2.5MHz.
+	 */
+	phy_data |= M88IGC_EPSCR_TX_CLK_25;
+	ret_val = phy->ops.write_reg(hw, M88IGC_EXT_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* In addition, we must re-enable CRS on Tx for both half and full
+	 * duplex.
+	 */
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= M88IGC_PSCR_ASSERT_CRS_ON_TX;
+	ret_val = phy->ops.write_reg(hw, M88IGC_PHY_SPEC_CTRL, phy_data);
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 igc_phy_force_speed_duplex_ife(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("igc_phy_force_speed_duplex_ife");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	igc_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		return ret_val;
+
+	DEBUGOUT1("IFE PMC: %X\n", data);
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ *  Forces speed and duplex on the PHY by doing the following: disable flow
+ *  control, force speed/duplex on the MAC, disable auto speed detection,
+ *  disable auto-negotiation, configure duplex, configure speed, configure
+ *  the collision distance, write configuration to CTRL register.  The
+ *  caller must write to the PHY_CONTROL register for these settings to
+ *  take affect.
+ **/
+void igc_phy_force_speed_duplex_setup(struct igc_hw *hw, u16 *phy_ctrl)
+{
+	struct igc_mac_info *mac = &hw->mac;
+	u32 ctrl;
+
+	DEBUGFUNC("igc_phy_force_speed_duplex_setup");
+
+	/* Turn off flow control when forcing speed/duplex */
+	hw->fc.current_mode = igc_fc_none;
+
+	/* Force speed/duplex on the mac */
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	ctrl |= (IGC_CTRL_FRCSPD | IGC_CTRL_FRCDPX);
+	ctrl &= ~IGC_CTRL_SPD_SEL;
+
+	/* Disable Auto Speed Detection */
+	ctrl &= ~IGC_CTRL_ASDE;
+
+	/* Disable autoneg on the phy */
+	*phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+	/* Forcing Full or Half Duplex? */
+	if (mac->forced_speed_duplex & IGC_ALL_HALF_DUPLEX) {
+		ctrl &= ~IGC_CTRL_FD;
+		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Half Duplex\n");
+	} else {
+		ctrl |= IGC_CTRL_FD;
+		*phy_ctrl |= MII_CR_FULL_DUPLEX;
+		DEBUGOUT("Full Duplex\n");
+	}
+
+	/* Forcing 10mb or 100mb? */
+	if (mac->forced_speed_duplex & IGC_ALL_100_SPEED) {
+		ctrl |= IGC_CTRL_SPD_100;
+		*phy_ctrl |= MII_CR_SPEED_100;
+		*phy_ctrl &= ~MII_CR_SPEED_1000;
+		DEBUGOUT("Forcing 100mb\n");
+	} else {
+		ctrl &= ~(IGC_CTRL_SPD_1000 | IGC_CTRL_SPD_100);
+		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+		DEBUGOUT("Forcing 10mb\n");
+	}
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+}
+
+/**
+ *  igc_set_d3_lplu_state_generic - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+s32 igc_set_d3_lplu_state_generic(struct igc_hw *hw, bool active)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("igc_set_d3_lplu_state_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return IGC_SUCCESS;
+
+	ret_val = phy->ops.read_reg(hw, IGP02IGC_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (!active) {
+		data &= ~IGP02IGC_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02IGC_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			return ret_val;
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == igc_smart_speed_on) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01IGC_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01IGC_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01IGC_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == igc_smart_speed_off) {
+			ret_val = phy->ops.read_reg(hw,
+						    IGP01IGC_PHY_PORT_CONFIG,
+						    &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01IGC_PSCFR_SMART_SPEED;
+			ret_val = phy->ops.write_reg(hw,
+						     IGP01IGC_PHY_PORT_CONFIG,
+						     data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((phy->autoneg_advertised == IGC_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == IGC_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == IGC_ALL_10_SPEED)) {
+		data |= IGP02IGC_PM_D3_LPLU;
+		ret_val = phy->ops.write_reg(hw, IGP02IGC_PHY_POWER_MGMT,
+					     data);
+		if (ret_val)
+			return ret_val;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = phy->ops.read_reg(hw, IGP01IGC_PHY_PORT_CONFIG,
+					    &data);
+		if (ret_val)
+			return ret_val;
+
+		data &= ~IGP01IGC_PSCFR_SMART_SPEED;
+		ret_val = phy->ops.write_reg(hw, IGP01IGC_PHY_PORT_CONFIG,
+					     data);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_check_downshift_generic - Checks whether a downshift in speed occurred
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  A downshift is detected by querying the PHY link health.
+ **/
+s32 igc_check_downshift_generic(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	DEBUGFUNC("igc_check_downshift_generic");
+
+	switch (phy->type) {
+	case igc_phy_i210:
+	case igc_phy_m88:
+	case igc_phy_gg82563:
+	case igc_phy_bm:
+	case igc_phy_82578:
+		offset = M88IGC_PHY_SPEC_STATUS;
+		mask = M88IGC_PSSR_DOWNSHIFT;
+		break;
+	case igc_phy_igp:
+	case igc_phy_igp_2:
+	case igc_phy_igp_3:
+		offset = IGP01IGC_PHY_LINK_HEALTH;
+		mask = IGP01IGC_PLHR_SS_DOWNGRADE;
+		break;
+	default:
+		/* speed downshift not supported */
+		phy->speed_downgraded = false;
+		return IGC_SUCCESS;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->speed_downgraded = !!(phy_data & mask);
+
+	return ret_val;
+}
+
+/**
+ *  igc_check_polarity_m88 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -IGC_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 igc_check_polarity_m88(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("igc_check_polarity_m88");
+
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_STATUS, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & M88IGC_PSSR_REV_POLARITY)
+				       ? igc_rev_polarity_reversed
+				       : igc_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  igc_check_polarity_igp - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -IGC_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY port status register, and the
+ *  current speed (since there is no polarity at 100Mbps).
+ **/
+s32 igc_check_polarity_igp(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data, offset, mask;
+
+	DEBUGFUNC("igc_check_polarity_igp");
+
+	/* Polarity is determined based on the speed of
+	 * our connection.
+	 */
+	ret_val = phy->ops.read_reg(hw, IGP01IGC_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	if ((data & IGP01IGC_PSSR_SPEED_MASK) ==
+	    IGP01IGC_PSSR_SPEED_1000MBPS) {
+		offset = IGP01IGC_PHY_PCS_INIT_REG;
+		mask = IGP01IGC_PHY_POLARITY_MASK;
+	} else {
+		/* This really only applies to 10Mbps since
+		 * there is no polarity for 100Mbps (always 0).
+		 */
+		offset = IGP01IGC_PHY_PORT_STATUS;
+		mask = IGP01IGC_PSSR_POLARITY_REVERSED;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & mask)
+				       ? igc_rev_polarity_reversed
+				       : igc_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  igc_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 igc_check_polarity_ife(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	DEBUGFUNC("igc_check_polarity_ife");
+
+	/* Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((phy_data & mask)
+				       ? igc_rev_polarity_reversed
+				       : igc_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  igc_wait_autoneg - Wait for auto-neg completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Waits for auto-negotiation to complete or for the auto-negotiation time
+ *  limit to expire, which ever happens first.
+ **/
+static s32 igc_wait_autoneg(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+	u16 i, phy_status;
+
+	DEBUGFUNC("igc_wait_autoneg");
+
+	if (!hw->phy.ops.read_reg)
+		return IGC_SUCCESS;
+
+	/* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+	for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_AUTONEG_COMPLETE)
+			break;
+		msec_delay(100);
+	}
+
+	/* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+	 * has completed.
+	 */
+	return ret_val;
+}
+
+/**
+ *  igc_phy_has_link_generic - Polls PHY for link
+ *  @hw: pointer to the HW structure
+ *  @iterations: number of times to poll for link
+ *  @usec_interval: delay between polling attempts
+ *  @success: pointer to whether polling was successful or not
+ *
+ *  Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igc_phy_has_link_generic(struct igc_hw *hw, u32 iterations,
+			       u32 usec_interval, bool *success)
+{
+	s32 ret_val = IGC_SUCCESS;
+	u16 i, phy_status;
+
+	DEBUGFUNC("igc_phy_has_link_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return IGC_SUCCESS;
+
+	for (i = 0; i < iterations; i++) {
+		/* Some PHYs require the PHY_STATUS register to be read
+		 * twice due to the link bit being sticky.  No harm doing
+		 * it across the board.
+		 */
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val) {
+			/* If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			if (usec_interval >= 1000)
+				msec_delay(usec_interval / 1000);
+			else
+				usec_delay(usec_interval);
+		}
+		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & MII_SR_LINK_STATUS)
+			break;
+		if (usec_interval >= 1000)
+			msec_delay(usec_interval / 1000);
+		else
+			usec_delay(usec_interval);
+	}
+
+	*success = (i < iterations);
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_cable_length_m88 - Determine cable length for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY specific status register to retrieve the cable length
+ *  information.  The cable length is determined by averaging the minimum and
+ *  maximum values to get the "average" cable length.  The m88 PHY has four
+ *  possible cable length values, which are:
+ *	Register Value		Cable Length
+ *	0			< 50 meters
+ *	1			50 - 80 meters
+ *	2			80 - 110 meters
+ *	3			110 - 140 meters
+ *	4			> 140 meters
+ **/
+s32 igc_get_cable_length_m88(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, index;
+
+	DEBUGFUNC("igc_get_cable_length_m88");
+
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	index = ((phy_data & M88IGC_PSSR_CABLE_LENGTH) >>
+		 M88IGC_PSSR_CABLE_LENGTH_SHIFT);
+
+	if (index >= M88IGC_CABLE_LENGTH_TABLE_SIZE - 1)
+		return -IGC_ERR_PHY;
+
+	phy->min_cable_length = igc_m88_cable_length_table[index];
+	phy->max_cable_length = igc_m88_cable_length_table[index + 1];
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return IGC_SUCCESS;
+}
+
+s32 igc_get_cable_length_m88_gen2(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val  = 0;
+	u16 phy_data, phy_data2, is_cm;
+	u16 index, default_page;
+
+	DEBUGFUNC("igc_get_cable_length_m88_gen2");
+
+	switch (hw->phy.id) {
+	case I210_I_PHY_ID:
+		/* Get cable length from PHY Cable Diagnostics Control Reg */
+		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+					    (I347AT4_PCDL + phy->addr),
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Check if the unit of cable length is meters or cm */
+		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+					    I347AT4_PCDC, &phy_data2);
+		if (ret_val)
+			return ret_val;
+
+		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+		/* Populate the phy structure with cable length in meters */
+		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+		break;
+	case I225_I_PHY_ID:
+		if (ret_val)
+			return ret_val;
+		/* TODO - complete with Foxville data */
+		break;
+	case M88E1543_E_PHY_ID:
+	case M88E1512_E_PHY_ID:
+	case M88E1340M_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
+		/* Remember the original page select and set it to 7 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+		if (ret_val)
+			return ret_val;
+
+		/* Get cable length from PHY Cable Diagnostics Control Reg */
+		ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Check if the unit of cable length is meters or cm */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+		if (ret_val)
+			return ret_val;
+
+		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+		/* Populate the phy structure with cable length in meters */
+		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+		phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+		/* Reset the page select to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			return ret_val;
+		break;
+
+	case M88E1112_E_PHY_ID:
+		/* Remember the original page select and set it to 5 */
+		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+					    &default_page);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+					    &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		index = (phy_data & M88IGC_PSSR_CABLE_LENGTH) >>
+			M88IGC_PSSR_CABLE_LENGTH_SHIFT;
+
+		if (index >= M88IGC_CABLE_LENGTH_TABLE_SIZE - 1)
+			return -IGC_ERR_PHY;
+
+		phy->min_cable_length = igc_m88_cable_length_table[index];
+		phy->max_cable_length = igc_m88_cable_length_table[index + 1];
+
+		phy->cable_length = (phy->min_cable_length +
+				     phy->max_cable_length) / 2;
+
+		/* Reset the page select to its original value */
+		ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+					     default_page);
+		if (ret_val)
+			return ret_val;
+
+		break;
+	default:
+		return -IGC_ERR_PHY;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  The automatic gain control (agc) normalizes the amplitude of the
+ *  received signal, adjusting for the attenuation produced by the
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of coarse and fine gain value, the value can be put
+ *  into a lookup table to obtain the approximate cable length
+ *  for each channel.
+ **/
+s32 igc_get_cable_length_igp_2(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, i, agc_value = 0;
+	u16 cur_agc_index, max_agc_index = 0;
+	u16 min_agc_index = IGP02IGC_CABLE_LENGTH_TABLE_SIZE - 1;
+	static const u16 agc_reg_array[IGP02IGC_PHY_CHANNEL_NUM] = {
+		IGP02IGC_PHY_AGC_A,
+		IGP02IGC_PHY_AGC_B,
+		IGP02IGC_PHY_AGC_C,
+		IGP02IGC_PHY_AGC_D
+	};
+
+	DEBUGFUNC("igc_get_cable_length_igp_2");
+
+	/* Read the AGC registers for all channels */
+	for (i = 0; i < IGP02IGC_PHY_CHANNEL_NUM; i++) {
+		ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Getting bits 15:9, which represent the combination of
+		 * coarse and fine gain values.  The result is a number
+		 * that can be put into the lookup table to obtain the
+		 * approximate cable length.
+		 */
+		cur_agc_index = ((phy_data >> IGP02IGC_AGC_LENGTH_SHIFT) &
+				 IGP02IGC_AGC_LENGTH_MASK);
+
+		/* Array index bound check. */
+		if (cur_agc_index >= IGP02IGC_CABLE_LENGTH_TABLE_SIZE ||
+				cur_agc_index == 0)
+			return -IGC_ERR_PHY;
+
+		/* Remove min & max AGC values from calculation. */
+		if (igc_igp_2_cable_length_table[min_agc_index] >
+		    igc_igp_2_cable_length_table[cur_agc_index])
+			min_agc_index = cur_agc_index;
+		if (igc_igp_2_cable_length_table[max_agc_index] <
+		    igc_igp_2_cable_length_table[cur_agc_index])
+			max_agc_index = cur_agc_index;
+
+		agc_value += igc_igp_2_cable_length_table[cur_agc_index];
+	}
+
+	agc_value -= (igc_igp_2_cable_length_table[min_agc_index] +
+		      igc_igp_2_cable_length_table[max_agc_index]);
+	agc_value /= (IGP02IGC_PHY_CHANNEL_NUM - 2);
+
+	/* Calculate cable length with the error range of +/- 10 meters. */
+	phy->min_cable_length = (((agc_value - IGP02IGC_AGC_RANGE) > 0) ?
+				 (agc_value - IGP02IGC_AGC_RANGE) : 0);
+	phy->max_cable_length = agc_value + IGP02IGC_AGC_RANGE;
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_phy_info_m88 - Retrieve PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Valid for only copper links.  Read the PHY status register (sticky read)
+ *  to verify that link is up.  Read the PHY special control register to
+ *  determine the polarity and 10base-T extended distance.  Read the PHY
+ *  special status register to determine MDI/MDIx and current speed.  If
+ *  speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igc_get_phy_info_m88(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32  ret_val;
+	u16 phy_data;
+	bool link;
+
+	DEBUGFUNC("igc_get_phy_info_m88");
+
+	if (phy->media_type != igc_media_type_copper) {
+		DEBUGOUT("Phy info is only valid for copper media\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->polarity_correction = !!(phy_data &
+				      M88IGC_PSCR_POLARITY_REVERSAL);
+
+	ret_val = igc_check_polarity_m88(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, M88IGC_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(phy_data & M88IGC_PSSR_MDIX);
+
+	if ((phy_data & M88IGC_PSSR_SPEED) == M88IGC_PSSR_1000MBS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+				? igc_1000t_rx_status_ok
+				: igc_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+				 ? igc_1000t_rx_status_ok
+				 : igc_1000t_rx_status_not_ok;
+	} else {
+		/* Set values to "undefined" */
+		phy->cable_length = IGC_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = igc_1000t_rx_status_undefined;
+		phy->remote_rx = igc_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_phy_info_igp - Retrieve igp PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 igc_get_phy_info_igp(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("igc_get_phy_info_igp");
+
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = igc_check_polarity_igp(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, IGP01IGC_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IGP01IGC_PSSR_MDIX);
+
+	if ((data & IGP01IGC_PSSR_SPEED_MASK) ==
+	    IGP01IGC_PSSR_SPEED_1000MBPS) {
+		ret_val = phy->ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+				? igc_1000t_rx_status_ok
+				: igc_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+				 ? igc_1000t_rx_status_ok
+				 : igc_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = IGC_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = igc_1000t_rx_status_undefined;
+		phy->remote_rx = igc_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 igc_get_phy_info_ife(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("igc_get_phy_info_ife");
+
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+	phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
+
+	if (phy->polarity_correction) {
+		ret_val = igc_check_polarity_ife(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
+				       ? igc_rev_polarity_reversed
+				       : igc_rev_polarity_normal);
+	}
+
+	ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = IGC_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = igc_1000t_rx_status_undefined;
+	phy->remote_rx = igc_1000t_rx_status_undefined;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_sw_reset_generic - PHY software reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Does a software reset of the PHY by reading the PHY control register and
+ *  setting/write the control register reset bit to the PHY.
+ **/
+s32 igc_phy_sw_reset_generic(struct igc_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	DEBUGFUNC("igc_phy_sw_reset_generic");
+
+	if (!hw->phy.ops.read_reg)
+		return IGC_SUCCESS;
+
+	ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= MII_CR_RESET;
+	ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	usec_delay(1);
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_hw_reset_generic - PHY hardware reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify the reset block is not blocking us from resetting.  Acquire
+ *  semaphore (if necessary) and read/set/write the device control reset
+ *  bit in the PHY.  Wait the appropriate delay time for the device to
+ *  reset and release the semaphore (if necessary).
+ **/
+s32 igc_phy_hw_reset_generic(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 ctrl;
+
+	DEBUGFUNC("igc_phy_hw_reset_generic");
+
+	if (phy->ops.check_reset_block) {
+		ret_val = phy->ops.check_reset_block(hw);
+		if (ret_val)
+			return IGC_SUCCESS;
+	}
+
+	ret_val = phy->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ctrl = IGC_READ_REG(hw, IGC_CTRL);
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl | IGC_CTRL_PHY_RST);
+	IGC_WRITE_FLUSH(hw);
+
+	usec_delay(phy->reset_delay_us);
+
+	IGC_WRITE_REG(hw, IGC_CTRL, ctrl);
+	IGC_WRITE_FLUSH(hw);
+
+	usec_delay(150);
+
+	phy->ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_cfg_done_generic - Generic configuration done
+ *  @hw: pointer to the HW structure
+ *
+ *  Generic function to wait 10 milli-seconds for configuration to complete
+ *  and return success.
+ **/
+s32 igc_get_cfg_done_generic(struct igc_hw IGC_UNUSEDARG * hw)
+{
+	DEBUGFUNC("igc_get_cfg_done_generic");
+	UNREFERENCED_1PARAMETER(hw);
+
+	msec_delay_irq(10);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_phy_init_script_igp3 - Inits the IGP3 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igc_phy_init_script_igp3(struct igc_hw *hw)
+{
+	DEBUGOUT("Running IGP 3 PHY init script\n");
+
+	/* PHY init IGP 3 */
+	/* Enable rise/fall, 10-mode work in class-A */
+	hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+	/* Remove all caps from Replica path filter */
+	hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+	/* Bias trimming for ADC, AFE and Driver (Default) */
+	hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+	/* Increase Hybrid poly bias */
+	hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+	/* Add 4% to Tx amplitude in Gig mode */
+	hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+	/* Disable trimming (TTT) */
+	hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+	/* Poly DC correction to 94.6% + 2% for all channels */
+	hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+	/* ABS DC correction to 95.9% */
+	hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+	/* BG temp curve trim */
+	hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+	/* Increasing ADC OPAMP stage 1 currents to max */
+	hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+	/* Force 1000 ( required for enabling PHY regs configuration) */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+	/* Set upd_freq to 6 */
+	hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+	/* Disable NPDFE */
+	hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+	/* Disable adaptive fixed FFE (Default) */
+	hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+	/* Enable FFE hysteresis */
+	hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+	/* Fixed FFE for short cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+	/* Fixed FFE for medium cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+	/* Fixed FFE for long cable lengths */
+	hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+	/* Enable Adaptive Clip Threshold */
+	hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+	/* AHT reset limit to 1 */
+	hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+	/* Set AHT master delay to 127 msec */
+	hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+	/* Set scan bits for AHT */
+	hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+	/* Set AHT Preset bits */
+	hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+	/* Change integ_factor of channel A to 3 */
+	hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+	/* Change prop_factor of channels BCD to 8 */
+	hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+	/* Change cg_icount + enable integbp for channels BCD */
+	hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+	/* Change cg_icount + enable integbp + change prop_factor_master
+	 * to 8 for channel A
+	 */
+	hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+	/* Disable AHT in Slave mode on channel A */
+	hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+	/* Enable LPLU and disable AN to 1000 in non-D0a states,
+	 * Enable SPD+B2B
+	 */
+	hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+	/* Enable restart AN on an1000_dis change */
+	hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+	/* Enable wh_fifo read clock in 10/100 modes */
+	hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+	/* Restart AN, Speed selection is 1000 */
+	hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_phy_type_from_id - Get PHY type from id
+ *  @phy_id: phy_id read from the phy
+ *
+ *  Returns the phy type from the id.
+ **/
+enum igc_phy_type igc_get_phy_type_from_id(u32 phy_id)
+{
+	enum igc_phy_type phy_type = igc_phy_unknown;
+
+	switch (phy_id) {
+	case M88IGC_I_PHY_ID:
+	case M88IGC_E_PHY_ID:
+	case M88E1111_I_PHY_ID:
+	case M88E1011_I_PHY_ID:
+	case M88E1543_E_PHY_ID:
+	case M88E1512_E_PHY_ID:
+	case I347AT4_E_PHY_ID:
+	case M88E1112_E_PHY_ID:
+	case M88E1340M_E_PHY_ID:
+		phy_type = igc_phy_m88;
+		break;
+	case IGP01IGC_I_PHY_ID: /* IGP 1 & 2 share this */
+		phy_type = igc_phy_igp_2;
+		break;
+	case GG82563_E_PHY_ID:
+		phy_type = igc_phy_gg82563;
+		break;
+	case IGP03IGC_E_PHY_ID:
+		phy_type = igc_phy_igp_3;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy_type = igc_phy_ife;
+		break;
+	case BMIGC_E_PHY_ID:
+	case BMIGC_E_PHY_ID_R2:
+		phy_type = igc_phy_bm;
+		break;
+	case I82578_E_PHY_ID:
+		phy_type = igc_phy_82578;
+		break;
+	case I82577_E_PHY_ID:
+		phy_type = igc_phy_82577;
+		break;
+	case I82579_E_PHY_ID:
+		phy_type = igc_phy_82579;
+		break;
+	case I217_E_PHY_ID:
+		phy_type = igc_phy_i217;
+		break;
+	case I82580_I_PHY_ID:
+		phy_type = igc_phy_82580;
+		break;
+	case I210_I_PHY_ID:
+		phy_type = igc_phy_i210;
+		break;
+	case I225_I_PHY_ID:
+		phy_type = igc_phy_i225;
+		break;
+	default:
+		phy_type = igc_phy_unknown;
+		break;
+	}
+	return phy_type;
+}
+
+/**
+ *  igc_determine_phy_address - Determines PHY address.
+ *  @hw: pointer to the HW structure
+ *
+ *  This uses a trial and error method to loop through possible PHY
+ *  addresses. It tests each by reading the PHY ID registers and
+ *  checking for a match.
+ **/
+s32 igc_determine_phy_address(struct igc_hw *hw)
+{
+	u32 phy_addr = 0;
+	u32 i;
+	enum igc_phy_type phy_type = igc_phy_unknown;
+
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < IGC_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
+			igc_get_phy_id(hw);
+			phy_type = igc_get_phy_type_from_id(hw->phy.id);
+
+			/* If phy_type is valid, break - we found our
+			 * PHY address
+			 */
+			if (phy_type != igc_phy_unknown)
+				return IGC_SUCCESS;
+
+			msec_delay(1);
+			i++;
+		} while (i < 10);
+	}
+
+	return -IGC_ERR_PHY_TYPE;
+}
+
+/**
+ *  igc_get_phy_addr_for_bm_page - Retrieve PHY page address
+ *  @page: page to access
+ *  @reg: register to access
+ *
+ *  Returns the phy address for the page requested.
+ **/
+static u32 igc_get_phy_addr_for_bm_page(u32 page, u32 reg)
+{
+	u32 phy_addr = 2;
+
+	if (page >= 768 || (page == 0 && reg == 25) || reg == 31)
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  igc_write_phy_reg_bm - Write BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_bm(struct igc_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+
+	DEBUGFUNC("igc_write_phy_reg_bm");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, false);
+		goto release;
+	}
+
+	hw->phy.addr = igc_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		u32 page_shift, page_select;
+
+		/* Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01IGC_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = igc_write_phy_reg_mdic(hw, page_select,
+						   (page << page_shift));
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = igc_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_bm - Read BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 igc_read_phy_reg_bm(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+
+	DEBUGFUNC("igc_read_phy_reg_bm");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, false);
+		goto release;
+	}
+
+	hw->phy.addr = igc_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		u32 page_shift, page_select;
+
+		/* Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01IGC_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = igc_write_phy_reg_mdic(hw, page_select,
+						   (page << page_shift));
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = igc_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					  data);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_bm2 - Read BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 igc_read_phy_reg_bm2(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+	DEBUGFUNC("igc_read_phy_reg_bm2");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, false);
+		goto release;
+	}
+
+	hw->phy.addr = 1;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = igc_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+						   page);
+
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = igc_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					  data);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_write_phy_reg_bm2 - Write BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_bm2(struct igc_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+	DEBUGFUNC("igc_write_phy_reg_bm2");
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, false);
+		goto release;
+	}
+
+	hw->phy.addr = 1;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = igc_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+						   page);
+
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = igc_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
+ *
+ *  Assumes semaphore already acquired and phy_reg points to a valid memory
+ *  address to store contents of the BM_WUC_ENABLE_REG register.
+ **/
+s32 igc_enable_phy_wakeup_reg_access_bm(struct igc_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val;
+	u16 temp;
+
+	DEBUGFUNC("igc_enable_phy_wakeup_reg_access_bm");
+
+	if (!phy_reg)
+		return -IGC_ERR_PARAM;
+
+	/* All page select, port ctrl and wakeup registers use phy address 1 */
+	hw->phy.addr = 1;
+
+	/* Select Port Control Registers page */
+	ret_val = igc_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		DEBUGOUT("Could not set Port Control page\n");
+		return ret_val;
+	}
+
+	ret_val = igc_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		DEBUGOUT2("Could not read PHY register %d.%d\n",
+			  BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		return ret_val;
+	}
+
+	/* Enable both PHY wakeup mode and Wakeup register page writes.
+	 * Prevent a power state change by disabling ME and Host PHY wakeup.
+	 */
+	temp = *phy_reg;
+	temp |= BM_WUC_ENABLE_BIT;
+	temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
+
+	ret_val = igc_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
+	if (ret_val) {
+		DEBUGOUT2("Could not write PHY register %d.%d\n",
+			  BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		return ret_val;
+	}
+
+	/* Select Host Wakeup Registers page - caller now able to write
+	 * registers on the Wakeup registers page
+	 */
+	return igc_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+}
+
+/**
+ *  igc_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
+ *
+ *  Restore BM_WUC_ENABLE_REG to its original value.
+ *
+ *  Assumes semaphore already acquired and *phy_reg is the contents of the
+ *  BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
+ *  caller.
+ **/
+s32 igc_disable_phy_wakeup_reg_access_bm(struct igc_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("igc_disable_phy_wakeup_reg_access_bm");
+
+	if (!phy_reg)
+		return -IGC_ERR_PARAM;
+
+	/* Select Port Control Registers page */
+	ret_val = igc_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		DEBUGOUT("Could not set Port Control page\n");
+		return ret_val;
+	}
+
+	/* Restore 769.17 to its original value */
+	ret_val = igc_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
+	if (ret_val)
+		DEBUGOUT2("Could not restore PHY register %d.%d\n",
+			  BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+
+	return ret_val;
+}
+
+/**
+ *  igc_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to read or write
+ *  @read: determines if operation is read or write
+ *  @page_set: BM_WUC_PAGE already set and access enabled
+ *
+ *  Read the PHY register at offset and store the retrieved information in
+ *  data, or write data to PHY register at offset.  Note the procedure to
+ *  access the PHY wakeup registers is different than reading the other PHY
+ *  registers. It works as such:
+ *  1) Set 769.17.2 (page 769, register 17, bit 2) = 1
+ *  2) Set page to 800 for host (801 if we were manageability)
+ *  3) Write the address using the address opcode (0x11)
+ *  4) Read or write the data using the data opcode (0x12)
+ *  5) Restore 769.17.2 to its original value
+ *
+ *  Steps 1 and 2 are done by igc_enable_phy_wakeup_reg_access_bm() and
+ *  step 5 is done by igc_disable_phy_wakeup_reg_access_bm().
+ *
+ *  Assumes semaphore is already acquired.  When page_set==true, assumes
+ *  the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
+ *  is responsible for calls to igc_[enable|disable]_phy_wakeup_reg_bm()).
+ **/
+static s32 igc_access_phy_wakeup_reg_bm(struct igc_hw *hw, u32 offset,
+					  u16 *data, bool read, bool page_set)
+{
+	s32 ret_val;
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 phy_reg = 0;
+
+	DEBUGFUNC("igc_access_phy_wakeup_reg_bm");
+
+	/* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
+	if (hw->mac.type == igc_pchlan &&
+		!(IGC_READ_REG(hw, IGC_PHY_CTRL) & IGC_PHY_CTRL_GBE_DISABLE))
+		DEBUGOUT1("Attempting to access page %d while gig enabled.\n",
+			  page);
+
+	if (!page_set) {
+		/* Enable access to PHY wakeup registers */
+		ret_val = igc_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+		if (ret_val) {
+			DEBUGOUT("Could not enable PHY wakeup reg access\n");
+			return ret_val;
+		}
+	}
+
+	DEBUGOUT2("Accessing PHY page %d reg 0x%x\n", page, reg);
+
+	/* Write the Wakeup register page offset value using opcode 0x11 */
+	ret_val = igc_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
+	if (ret_val) {
+		DEBUGOUT1("Could not write address opcode to page %d\n", page);
+		return ret_val;
+	}
+
+	if (read) {
+		/* Read the Wakeup register page value using opcode 0x12 */
+		ret_val = igc_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+						  data);
+	} else {
+		/* Write the Wakeup register page value using opcode 0x12 */
+		ret_val = igc_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+						   *data);
+	}
+
+	if (ret_val) {
+		DEBUGOUT2("Could not access PHY reg %d.%d\n", page, reg);
+		return ret_val;
+	}
+
+	if (!page_set)
+		ret_val = igc_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+	return ret_val;
+}
+
+/**
+ * igc_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void igc_power_up_phy_copper(struct igc_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igc_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void igc_power_down_phy_copper(struct igc_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+	msec_delay(1);
+}
+
+/**
+ *  __igc_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *  @page_set: BM_WUC_PAGE already set and access enabled
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and stores the retrieved information in data.  Release any acquired
+ *  semaphore before exiting.
+ **/
+static s32 __igc_read_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 *data,
+				   bool locked, bool page_set)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = igc_get_phy_addr_for_hv_page(page);
+
+	DEBUGFUNC("__igc_read_phy_reg_hv");
+
+	if (!locked) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, page_set);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = igc_access_phy_debug_regs_hv(hw, offset,
+							 data, true);
+		goto out;
+	}
+
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
+
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = igc_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
+
+			hw->phy.addr = phy_addr;
+
+			if (ret_val)
+				goto out;
+		}
+	}
+
+	DEBUGOUT3("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+		  page << IGP_PAGE_SHIFT, reg);
+
+	ret_val = igc_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+					  data);
+out:
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores
+ *  the retrieved information in data.  Release the acquired semaphore
+ *  before exiting.
+ **/
+s32 igc_read_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ *  igc_read_phy_reg_hv_locked -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 igc_read_phy_reg_hv_locked(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  igc_read_phy_reg_page_hv - Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired and page already set.
+ **/
+s32 igc_read_phy_reg_page_hv(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	return __igc_read_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ *  __igc_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *  @page_set: BM_WUC_PAGE already set and access enabled
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+static s32 __igc_write_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 data,
+				    bool locked, bool page_set)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = igc_get_phy_addr_for_hv_page(page);
+
+	DEBUGFUNC("__igc_write_phy_reg_hv");
+
+	if (!locked) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = igc_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, page_set);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = igc_access_phy_debug_regs_hv(hw, offset,
+							 &data, false);
+		goto out;
+	}
+
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
+
+		/*
+		 * Workaround MDIO accesses being disabled after entering IEEE
+		 * Power Down (when bit 11 of the PHY Control register is set)
+		 */
+		if (hw->phy.type == igc_phy_82578 &&
+				hw->phy.revision >= 1 &&
+				hw->phy.addr == 2 &&
+				!(MAX_PHY_REG_ADDRESS & reg) &&
+				(data & (1 << 11))) {
+			u16 data2 = 0x7EFF;
+			ret_val = igc_access_phy_debug_regs_hv(hw,
+								(1 << 6) | 0x3,
+								&data2, false);
+			if (ret_val)
+				goto out;
+		}
+
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = igc_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
+
+			hw->phy.addr = phy_addr;
+
+			if (ret_val)
+				goto out;
+		}
+	}
+
+	DEBUGOUT3("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+		  page << IGP_PAGE_SHIFT, reg);
+
+	ret_val = igc_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+					   data);
+
+out:
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  igc_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register at the offset.
+ *  Release the acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ *  igc_write_phy_reg_hv_locked - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.  Assumes semaphore
+ *  already acquired.
+ **/
+s32 igc_write_phy_reg_hv_locked(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  igc_write_phy_reg_page_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.  Assumes semaphore
+ *  already acquired and page already set.
+ **/
+s32 igc_write_phy_reg_page_hv(struct igc_hw *hw, u32 offset, u16 data)
+{
+	return __igc_write_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ *  igc_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  @page: page to be accessed
+ **/
+static u32 igc_get_phy_addr_for_hv_page(u32 page)
+{
+	u32 phy_addr = 2;
+
+	if (page >= HV_INTC_FC_PAGE_START)
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ * igc_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read or written
+ * @data: pointer to the data to be read or written
+ * @read: determines if operation is read or write
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data.  Assumes semaphore already acquired.  Note that the procedure
+ * to access these regs uses the address port and data port to read/write.
+ * These accesses done with PHY address 2 and without using pages.
+ **/
+static s32 igc_access_phy_debug_regs_hv(struct igc_hw *hw, u32 offset,
+					  u16 *data, bool read)
+{
+	s32 ret_val;
+	u32 addr_reg;
+	u32 data_reg;
+
+	DEBUGFUNC("igc_access_phy_debug_regs_hv");
+
+	/* This takes care of the difference with desktop vs mobile phy */
+	addr_reg = ((hw->phy.type == igc_phy_82578) ?
+		    I82578_ADDR_REG : I82577_ADDR_REG);
+	data_reg = addr_reg + 1;
+
+	/* All operations in this function are phy address 2 */
+	hw->phy.addr = 2;
+
+	/* masking with 0x3F to remove the page from offset */
+	ret_val = igc_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
+	if (ret_val) {
+		DEBUGOUT("Could not write the Address Offset port register\n");
+		return ret_val;
+	}
+
+	/* Read or write the data value next */
+	if (read)
+		ret_val = igc_read_phy_reg_mdic(hw, data_reg, data);
+	else
+		ret_val = igc_write_phy_reg_mdic(hw, data_reg, *data);
+
+	if (ret_val)
+		DEBUGOUT("Could not access the Data port register\n");
+
+	return ret_val;
+}
+
+/**
+ *  igc_link_stall_workaround_hv - Si workaround
+ *  @hw: pointer to the HW structure
+ *
+ *  This function works around a Si bug where the link partner can get
+ *  a link up indication before the PHY does.  If small packets are sent
+ *  by the link partner they can be placed in the packet buffer without
+ *  being properly accounted for by the PHY and will stall preventing
+ *  further packets from being received.  The workaround is to clear the
+ *  packet buffer after the PHY detects link up.
+ **/
+s32 igc_link_stall_workaround_hv(struct igc_hw *hw)
+{
+	s32 ret_val = IGC_SUCCESS;
+	u16 data;
+
+	DEBUGFUNC("igc_link_stall_workaround_hv");
+
+	if (hw->phy.type != igc_phy_82578)
+		return IGC_SUCCESS;
+
+	/* Do not apply workaround if in PHY loopback bit 14 set */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
+	if (data & PHY_CONTROL_LB)
+		return IGC_SUCCESS;
+
+	/* check if link is up and at 1Gbps */
+	ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		 BM_CS_STATUS_SPEED_MASK);
+
+	if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		     BM_CS_STATUS_SPEED_1000))
+		return IGC_SUCCESS;
+
+	msec_delay(200);
+
+	/* flush the packets in the fifo buffer */
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
+					(HV_MUX_DATA_CTRL_GEN_TO_MAC |
+					 HV_MUX_DATA_CTRL_FORCE_SPEED));
+	if (ret_val)
+		return ret_val;
+
+	return hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
+				     HV_MUX_DATA_CTRL_GEN_TO_MAC);
+}
+
+/**
+ *  igc_check_polarity_82577 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -IGC_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 igc_check_polarity_82577(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	DEBUGFUNC("igc_check_polarity_82577");
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
+				       ? igc_rev_polarity_reversed
+				       : igc_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  igc_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.
+ **/
+s32 igc_phy_force_speed_duplex_82577(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link = false;
+
+	DEBUGFUNC("igc_phy_force_speed_duplex_82577");
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	igc_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	usec_delay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n");
+
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			DEBUGOUT("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igc_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						     100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  igc_get_phy_info_82577 - Retrieve I82577 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 igc_get_phy_info_82577(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	DEBUGFUNC("igc_get_phy_info_82577");
+
+	ret_val = igc_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		DEBUGOUT("Phy info is only valid if link is up\n");
+		return -IGC_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = igc_check_polarity_82577(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
+
+	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+				? igc_1000t_rx_status_ok
+				: igc_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+				 ? igc_1000t_rx_status_ok
+				 : igc_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = IGC_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = igc_1000t_rx_status_undefined;
+		phy->remote_rx = igc_1000t_rx_status_undefined;
+	}
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_get_cable_length_82577 - Determine cable length for 82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igc_get_cable_length_82577(struct igc_hw *hw)
+{
+	struct igc_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+	DEBUGFUNC("igc_get_cable_length_82577");
+
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+		  I82577_DSTATUS_CABLE_LENGTH_SHIFT);
+
+	if (length == IGC_CABLE_LENGTH_UNDEFINED)
+		return -IGC_ERR_PHY;
+
+	phy->cable_length = length;
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_phy_reg_gs40g - Write GS40G  PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_gs40g(struct igc_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = offset >> GS40G_PAGE_SHIFT;
+
+	DEBUGFUNC("igc_write_phy_reg_gs40g");
+
+	offset = offset & GS40G_OFFSET_MASK;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+	if (ret_val)
+		goto release;
+	ret_val = igc_write_phy_reg_mdic(hw, offset, data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_gs40g - Read GS40G  PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: lower half is register offset to read to
+ *     upper half is page to use.
+ *  @data: data to read at register offset
+ *
+ *  Acquires semaphore, if necessary, then reads the data in the PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_read_phy_reg_gs40g(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = offset >> GS40G_PAGE_SHIFT;
+
+	DEBUGFUNC("igc_read_phy_reg_gs40g");
+
+	offset = offset & GS40G_OFFSET_MASK;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = igc_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+	if (ret_val)
+		goto release;
+	ret_val = igc_read_phy_reg_mdic(hw, offset, data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  igc_write_phy_reg_gpy - Write GPY PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT;
+
+	DEBUGFUNC("igc_write_phy_reg_gpy");
+
+	offset = offset & GPY_REG_MASK;
+
+	if (!dev_addr) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = igc_write_phy_reg_mdic(hw, offset, data);
+		if (ret_val)
+			return ret_val;
+		hw->phy.ops.release(hw);
+	} else {
+		ret_val = igc_write_xmdio_reg(hw, (u16)offset, dev_addr,
+						data);
+	}
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_gpy - Read GPY PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: lower half is register offset to read to
+ *     upper half is MMD to use.
+ *  @data: data to read at register offset
+ *
+ *  Acquires semaphore, if necessary, then reads the data in the PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT;
+
+	DEBUGFUNC("igc_read_phy_reg_gpy");
+
+	offset = offset & GPY_REG_MASK;
+
+	if (!dev_addr) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = igc_read_phy_reg_mdic(hw, offset, data);
+		if (ret_val)
+			return ret_val;
+		hw->phy.ops.release(hw);
+	} else {
+		ret_val = igc_read_xmdio_reg(hw, (u16)offset, dev_addr,
+					       data);
+	}
+	return ret_val;
+}
+
+/**
+ *  igc_read_phy_reg_mphy - Read mPHY control register
+ *  @hw: pointer to the HW structure
+ *  @address: address to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the mPHY control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 igc_read_phy_reg_mphy(struct igc_hw *hw, u32 address, u32 *data)
+{
+	u32 mphy_ctrl = 0;
+	bool locked = false;
+	bool ready;
+
+	DEBUGFUNC("igc_read_phy_reg_mphy");
+
+	/* Check if mPHY is ready to read/write operations */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+
+	/* Check if mPHY access is disabled and enable it if so */
+	mphy_ctrl = IGC_READ_REG(hw, IGC_MPHY_ADDR_CTRL);
+	if (mphy_ctrl & IGC_MPHY_DIS_ACCESS) {
+		locked = true;
+		ready = igc_is_mphy_ready(hw);
+		if (!ready)
+			return -IGC_ERR_PHY;
+		mphy_ctrl |= IGC_MPHY_ENA_ACCESS;
+		IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL, mphy_ctrl);
+	}
+
+	/* Set the address that we want to read */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+
+	/* We mask address, because we want to use only current lane */
+	mphy_ctrl = (mphy_ctrl & ~IGC_MPHY_ADDRESS_MASK &
+		~IGC_MPHY_ADDRESS_FNC_OVERRIDE) |
+		(address & IGC_MPHY_ADDRESS_MASK);
+	IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL, mphy_ctrl);
+
+	/* Read data from the address */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+	*data = IGC_READ_REG(hw, IGC_MPHY_DATA);
+
+	/* Disable access to mPHY if it was originally disabled */
+	if (locked)
+		ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+	IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL,
+			IGC_MPHY_DIS_ACCESS);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_write_phy_reg_mphy - Write mPHY control register
+ *  @hw: pointer to the HW structure
+ *  @address: address to write to
+ *  @data: data to write to register at offset
+ *  @line_override: used when we want to use different line than default one
+ *
+ *  Writes data to mPHY control register.
+ **/
+s32 igc_write_phy_reg_mphy(struct igc_hw *hw, u32 address, u32 data,
+			     bool line_override)
+{
+	u32 mphy_ctrl = 0;
+	bool locked = false;
+	bool ready;
+
+	DEBUGFUNC("igc_write_phy_reg_mphy");
+
+	/* Check if mPHY is ready to read/write operations */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+
+	/* Check if mPHY access is disabled and enable it if so */
+	mphy_ctrl = IGC_READ_REG(hw, IGC_MPHY_ADDR_CTRL);
+	if (mphy_ctrl & IGC_MPHY_DIS_ACCESS) {
+		locked = true;
+		ready = igc_is_mphy_ready(hw);
+		if (!ready)
+			return -IGC_ERR_PHY;
+		mphy_ctrl |= IGC_MPHY_ENA_ACCESS;
+		IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL, mphy_ctrl);
+	}
+
+	/* Set the address that we want to read */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+
+	/* We mask address, because we want to use only current lane */
+	if (line_override)
+		mphy_ctrl |= IGC_MPHY_ADDRESS_FNC_OVERRIDE;
+	else
+		mphy_ctrl &= ~IGC_MPHY_ADDRESS_FNC_OVERRIDE;
+	mphy_ctrl = (mphy_ctrl & ~IGC_MPHY_ADDRESS_MASK) |
+		(address & IGC_MPHY_ADDRESS_MASK);
+	IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL, mphy_ctrl);
+
+	/* Read data from the address */
+	ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+	IGC_WRITE_REG(hw, IGC_MPHY_DATA, data);
+
+	/* Disable access to mPHY if it was originally disabled */
+	if (locked)
+		ready = igc_is_mphy_ready(hw);
+	if (!ready)
+		return -IGC_ERR_PHY;
+	IGC_WRITE_REG(hw, IGC_MPHY_ADDR_CTRL,
+			IGC_MPHY_DIS_ACCESS);
+
+	return IGC_SUCCESS;
+}
+
+/**
+ *  igc_is_mphy_ready - Check if mPHY control register is not busy
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns mPHY control register status.
+ **/
+bool igc_is_mphy_ready(struct igc_hw *hw)
+{
+	u16 retry_count = 0;
+	u32 mphy_ctrl = 0;
+	bool ready = false;
+
+	while (retry_count < 2) {
+		mphy_ctrl = IGC_READ_REG(hw, IGC_MPHY_ADDR_CTRL);
+		if (mphy_ctrl & IGC_MPHY_BUSY) {
+			usec_delay(20);
+			retry_count++;
+			continue;
+		}
+		ready = true;
+		break;
+	}
+
+	if (!ready)
+		DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n");
+
+	return ready;
+}
+
+/**
+ *  __igc_access_xmdio_reg - Read/write XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @address: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: pointer to value to read/write from/to the XMDIO address
+ *  @read: boolean flag to indicate read or write
+ **/
+static s32 __igc_access_xmdio_reg(struct igc_hw *hw, u16 address,
+				    u8 dev_addr, u16 *data, bool read)
+{
+	s32 ret_val;
+
+	DEBUGFUNC("__igc_access_xmdio_reg");
+
+	ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, dev_addr);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAAD, address);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, IGC_MMDAC_FUNC_DATA |
+					dev_addr);
+	if (ret_val)
+		return ret_val;
+
+	if (read)
+		ret_val = hw->phy.ops.read_reg(hw, IGC_MMDAAD, data);
+	else
+		ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAAD, *data);
+	if (ret_val)
+		return ret_val;
+
+	/* Recalibrate the device back to 0 */
+	ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, 0);
+	if (ret_val)
+		return ret_val;
+
+	return ret_val;
+}
+
+/**
+ *  igc_read_xmdio_reg - Read XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @addr: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: value to be read from the EMI address
+ **/
+s32 igc_read_xmdio_reg(struct igc_hw *hw, u16 addr, u8 dev_addr, u16 *data)
+{
+	DEBUGFUNC("igc_read_xmdio_reg");
+
+	return __igc_access_xmdio_reg(hw, addr, dev_addr, data, true);
+}
+
+/**
+ *  igc_write_xmdio_reg - Write XMDIO register
+ *  @hw: pointer to the HW structure
+ *  @addr: XMDIO address to program
+ *  @dev_addr: device address to program
+ *  @data: value to be written to the XMDIO address
+ **/
+s32 igc_write_xmdio_reg(struct igc_hw *hw, u16 addr, u8 dev_addr, u16 data)
+{
+	DEBUGFUNC("igc_write_xmdio_reg");
+
+	return __igc_access_xmdio_reg(hw, addr, dev_addr, &data,
+				false);
+}
diff --git a/drivers/net/igc/base/igc_phy.h b/drivers/net/igc/base/igc_phy.h
new file mode 100644
index 0000000..5fae598
--- /dev/null
+++ b/drivers/net/igc/base/igc_phy.h
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_PHY_H_
+#define _IGC_PHY_H_
+
+void igc_init_phy_ops_generic(struct igc_hw *hw);
+s32  igc_null_read_reg(struct igc_hw *hw, u32 offset, u16 *data);
+void igc_null_phy_generic(struct igc_hw *hw);
+s32  igc_null_lplu_state(struct igc_hw *hw, bool active);
+s32  igc_null_write_reg(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_null_set_page(struct igc_hw *hw, u16 data);
+s32 igc_read_i2c_byte_null(struct igc_hw *hw, u8 byte_offset,
+			     u8 dev_addr, u8 *data);
+s32 igc_write_i2c_byte_null(struct igc_hw *hw, u8 byte_offset,
+			      u8 dev_addr, u8 data);
+s32  igc_check_downshift_generic(struct igc_hw *hw);
+s32  igc_check_polarity_m88(struct igc_hw *hw);
+s32  igc_check_polarity_igp(struct igc_hw *hw);
+s32  igc_check_polarity_ife(struct igc_hw *hw);
+s32  igc_check_reset_block_generic(struct igc_hw *hw);
+s32  igc_phy_setup_autoneg(struct igc_hw *hw);
+s32  igc_copper_link_autoneg(struct igc_hw *hw);
+s32  igc_copper_link_setup_igp(struct igc_hw *hw);
+s32  igc_copper_link_setup_m88(struct igc_hw *hw);
+s32  igc_copper_link_setup_m88_gen2(struct igc_hw *hw);
+s32  igc_phy_force_speed_duplex_igp(struct igc_hw *hw);
+s32  igc_phy_force_speed_duplex_m88(struct igc_hw *hw);
+s32  igc_phy_force_speed_duplex_ife(struct igc_hw *hw);
+s32  igc_get_cable_length_m88(struct igc_hw *hw);
+s32  igc_get_cable_length_m88_gen2(struct igc_hw *hw);
+s32  igc_get_cable_length_igp_2(struct igc_hw *hw);
+s32  igc_get_cfg_done_generic(struct igc_hw *hw);
+s32  igc_get_phy_id(struct igc_hw *hw);
+s32  igc_get_phy_info_igp(struct igc_hw *hw);
+s32  igc_get_phy_info_m88(struct igc_hw *hw);
+s32  igc_get_phy_info_ife(struct igc_hw *hw);
+s32  igc_phy_sw_reset_generic(struct igc_hw *hw);
+void igc_phy_force_speed_duplex_setup(struct igc_hw *hw, u16 *phy_ctrl);
+s32  igc_phy_hw_reset_generic(struct igc_hw *hw);
+s32  igc_phy_reset_dsp_generic(struct igc_hw *hw);
+s32  igc_read_kmrn_reg_generic(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_read_kmrn_reg_locked(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_set_page_igp(struct igc_hw *hw, u16 page);
+s32  igc_read_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_read_phy_reg_igp_locked(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_read_phy_reg_m88(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_set_d3_lplu_state_generic(struct igc_hw *hw, bool active);
+s32  igc_setup_copper_link_generic(struct igc_hw *hw);
+s32  igc_write_kmrn_reg_generic(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_kmrn_reg_locked(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_phy_reg_igp(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_phy_reg_igp_locked(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_phy_reg_m88(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_phy_has_link_generic(struct igc_hw *hw, u32 iterations,
+				u32 usec_interval, bool *success);
+s32  igc_phy_init_script_igp3(struct igc_hw *hw);
+enum igc_phy_type igc_get_phy_type_from_id(u32 phy_id);
+s32  igc_determine_phy_address(struct igc_hw *hw);
+s32  igc_write_phy_reg_bm(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_read_phy_reg_bm(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_enable_phy_wakeup_reg_access_bm(struct igc_hw *hw, u16 *phy_reg);
+s32  igc_disable_phy_wakeup_reg_access_bm(struct igc_hw *hw, u16 *phy_reg);
+s32  igc_read_phy_reg_bm2(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_write_phy_reg_bm2(struct igc_hw *hw, u32 offset, u16 data);
+void igc_power_up_phy_copper(struct igc_hw *hw);
+void igc_power_down_phy_copper(struct igc_hw *hw);
+s32  igc_read_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_write_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_read_phy_reg_i2c(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_write_phy_reg_i2c(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_read_sfp_data_byte(struct igc_hw *hw, u16 offset, u8 *data);
+s32  igc_write_sfp_data_byte(struct igc_hw *hw, u16 offset, u8 data);
+s32  igc_read_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_read_phy_reg_hv_locked(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_read_phy_reg_page_hv(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_write_phy_reg_hv(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_phy_reg_hv_locked(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_write_phy_reg_page_hv(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_link_stall_workaround_hv(struct igc_hw *hw);
+s32  igc_copper_link_setup_82577(struct igc_hw *hw);
+s32  igc_check_polarity_82577(struct igc_hw *hw);
+s32  igc_get_phy_info_82577(struct igc_hw *hw);
+s32  igc_phy_force_speed_duplex_82577(struct igc_hw *hw);
+s32  igc_get_cable_length_82577(struct igc_hw *hw);
+s32  igc_write_phy_reg_gs40g(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_read_phy_reg_gs40g(struct igc_hw *hw, u32 offset, u16 *data);
+s32  igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data);
+s32  igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data);
+s32 igc_read_phy_reg_mphy(struct igc_hw *hw, u32 address, u32 *data);
+s32 igc_write_phy_reg_mphy(struct igc_hw *hw, u32 address, u32 data,
+			     bool line_override);
+bool igc_is_mphy_ready(struct igc_hw *hw);
+
+s32 igc_read_xmdio_reg(struct igc_hw *hw, u16 addr, u8 dev_addr,
+			 u16 *data);
+s32 igc_write_xmdio_reg(struct igc_hw *hw, u16 addr, u8 dev_addr,
+			  u16 data);
+
+#define IGC_MAX_PHY_ADDR		8
+
+/* IGP01E1000 Specific Registers */
+#define IGP01IGC_PHY_PORT_CONFIG	0x10 /* Port Config */
+#define IGP01IGC_PHY_PORT_STATUS	0x11 /* Status */
+#define IGP01IGC_PHY_PORT_CTRL	0x12 /* Control */
+#define IGP01IGC_PHY_LINK_HEALTH	0x13 /* PHY Link Health */
+#define IGP01IGC_GMII_FIFO		0x14 /* GMII FIFO */
+#define IGP02IGC_PHY_POWER_MGMT	0x19 /* Power Management */
+#define IGP01IGC_PHY_PAGE_SELECT	0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT		22   /* Page Select for BM */
+#define IGP_PAGE_SHIFT			5
+#define PHY_REG_MASK			0x1F
+
+/* GS40G - I210 PHY defines */
+#define GS40G_PAGE_SELECT		0x16
+#define GS40G_PAGE_SHIFT		16
+#define GS40G_OFFSET_MASK		0xFFFF
+#define GS40G_PAGE_2			0x20000
+#define GS40G_MAC_REG2			0x15
+#define GS40G_MAC_LB			0x4140
+#define GS40G_MAC_SPEED_1G		0X0006
+#define GS40G_COPPER_SPEC		0x0010
+
+#define IGC_I225_PHPM			0x0E14 /* I225 PHY Power Management */
+#define IGC_I225_PHPM_DIS_1000_D3	0x0008 /* Disable 1G in D3 */
+#define IGC_I225_PHPM_LINK_ENERGY	0x0010 /* Link Energy Detect */
+#define IGC_I225_PHPM_GO_LINKD	0x0020 /* Go Link Disconnect */
+#define IGC_I225_PHPM_DIS_1000	0x0040 /* Disable 1G globally */
+#define IGC_I225_PHPM_SPD_B2B_EN	0x0080 /* Smart Power Down Back2Back */
+#define IGC_I225_PHPM_RST_COMPL	0x0100 /* PHY Reset Completed */
+#define IGC_I225_PHPM_DIS_100_D3	0x0200 /* Disable 100M in D3 */
+#define IGC_I225_PHPM_ULP		0x0400 /* Ultra Low-Power Mode */
+#define IGC_I225_PHPM_DIS_2500	0x0800 /* Disable 2.5G globally */
+#define IGC_I225_PHPM_DIS_2500_D3	0x1000 /* Disable 2.5G in D3 */
+/* GPY211 - I225 defines */
+#define GPY_MMD_MASK			0xFFFF0000
+#define GPY_MMD_SHIFT			16
+#define GPY_REG_MASK			0x0000FFFF
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE		769
+#define BM_WUC_PAGE			800
+#define BM_WUC_ADDRESS_OPCODE		0x11
+#define BM_WUC_DATA_OPCODE		0x12
+#define BM_WUC_ENABLE_PAGE		BM_PORT_CTRL_PAGE
+#define BM_WUC_ENABLE_REG		17
+#define BM_WUC_ENABLE_BIT		(1 << 2)
+#define BM_WUC_HOST_WU_BIT		(1 << 4)
+#define BM_WUC_ME_WU_BIT		(1 << 5)
+
+#define PHY_UPPER_SHIFT			21
+
+#define BM_PHY_REG(page, reg)	(	\
+	__extension__ ({		\
+		typeof(page) _page = (page);	\
+		typeof(reg) _reg = (reg);	\
+		(_reg & MAX_PHY_REG_ADDRESS) |	\
+		((_page & 0xFFFF) << PHY_PAGE_SHIFT) |	\
+		((_reg & ~MAX_PHY_REG_ADDRESS) <<	\
+		(PHY_UPPER_SHIFT - PHY_PAGE_SHIFT));	\
+	}))
+
+#define BM_PHY_REG_PAGE(offset) \
+	((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+
+#define BM_PHY_REG_NUM(offset)	(	\
+	__extension__ ({		\
+		typeof(offset) _offset = (offset);	\
+		(u16)((_offset & MAX_PHY_REG_ADDRESS) |	\
+		((_offset >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &	\
+		~MAX_PHY_REG_ADDRESS));			\
+	}))
+
+#define HV_INTC_FC_PAGE_START		768
+#define I82578_ADDR_REG			29
+#define I82577_ADDR_REG			16
+#define I82577_CFG_REG			22
+#define I82577_CFG_ASSERT_CRS_ON_TX	(1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT	(3 << 10) /* auto downshift */
+#define I82577_CTRL_REG			23
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2		18
+#define I82577_PHY_LBK_CTRL		19
+#define I82577_PHY_STATUS_2		26
+#define I82577_PHY_DIAG_STATUS		31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY		0x0400
+#define I82577_PHY_STATUS2_MDIX			0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK		0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS	0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_MANUAL_MDIX		0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX		0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK		0x0600
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH		0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT	2
+
+/* 82580 PHY Power Management */
+#define IGC_82580_PHY_POWER_MGMT	0xE14
+#define IGC_82580_PM_SPD		0x0001 /* Smart Power Down */
+#define IGC_82580_PM_D0_LPLU		0x0002 /* For D0a states */
+#define IGC_82580_PM_D3_LPLU		0x0004 /* For all other states */
+#define IGC_82580_PM_GO_LINKD		0x0020 /* Go Link Disconnect */
+
+#define IGC_MPHY_DIS_ACCESS		0x80000000 /* disable_access bit */
+#define IGC_MPHY_ENA_ACCESS		0x40000000 /* enable_access bit */
+#define IGC_MPHY_BUSY			0x00010000 /* busy bit */
+#define IGC_MPHY_ADDRESS_FNC_OVERRIDE	0x20000000 /* fnc_override bit */
+#define IGC_MPHY_ADDRESS_MASK		0x0000FFFF /* address mask */
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1			16
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS			17
+#define BM_CS_STATUS_LINK_UP		0x0400
+#define BM_CS_STATUS_RESOLVED		0x0800
+#define BM_CS_STATUS_SPEED_MASK		0xC000
+#define BM_CS_STATUS_SPEED_1000		0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS			26
+#define HV_M_STATUS_AUTONEG_COMPLETE	0x1000
+#define HV_M_STATUS_SPEED_MASK		0x0300
+#define HV_M_STATUS_SPEED_1000		0x0200
+#define HV_M_STATUS_SPEED_100		0x0100
+#define HV_M_STATUS_LINK_UP		0x0040
+
+#define IGP01IGC_PHY_PCS_INIT_REG	0x00B4
+#define IGP01IGC_PHY_POLARITY_MASK	0x0078
+
+#define IGP01IGC_PSCR_AUTO_MDIX	0x1000
+#define IGP01IGC_PSCR_FORCE_MDI_MDIX	0x2000 /* 0=MDI, 1=MDIX */
+
+#define IGP01IGC_PSCFR_SMART_SPEED	0x0080
+
+/* Enable flexible speed on link-up */
+#define IGP01IGC_GMII_FLEX_SPD	0x0010
+#define IGP01IGC_GMII_SPD		0x0020 /* Enable SPD */
+
+#define IGP02IGC_PM_SPD		0x0001 /* Smart Power Down */
+#define IGP02IGC_PM_D0_LPLU		0x0002 /* For D0a states */
+#define IGP02IGC_PM_D3_LPLU		0x0004 /* For all other states */
+
+#define IGP01IGC_PLHR_SS_DOWNGRADE	0x8000
+
+#define IGP01IGC_PSSR_POLARITY_REVERSED	0x0002
+#define IGP01IGC_PSSR_MDIX		0x0800
+#define IGP01IGC_PSSR_SPEED_MASK	0xC000
+#define IGP01IGC_PSSR_SPEED_1000MBPS	0xC000
+
+#define IGP02IGC_PHY_CHANNEL_NUM	4
+#define IGP02IGC_PHY_AGC_A		0x11B1
+#define IGP02IGC_PHY_AGC_B		0x12B1
+#define IGP02IGC_PHY_AGC_C		0x14B1
+#define IGP02IGC_PHY_AGC_D		0x18B1
+
+#define IGP02IGC_AGC_LENGTH_SHIFT	9   /* Course=15:13, Fine=12:9 */
+#define IGP02IGC_AGC_LENGTH_MASK	0x7F
+#define IGP02IGC_AGC_RANGE		15
+
+#define IGC_CABLE_LENGTH_UNDEFINED	0xFF
+
+#define IGC_KMRNCTRLSTA_OFFSET	0x001F0000
+#define IGC_KMRNCTRLSTA_OFFSET_SHIFT	16
+#define IGC_KMRNCTRLSTA_REN		0x00200000
+#define IGC_KMRNCTRLSTA_CTRL_OFFSET	0x1    /* Kumeran Control */
+#define IGC_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
+#define IGC_KMRNCTRLSTA_TIMEOUTS	0x4    /* Kumeran Timeouts */
+#define IGC_KMRNCTRLSTA_INBAND_PARAM	0x9    /* Kumeran InBand Parameters */
+#define IGC_KMRNCTRLSTA_IBIST_DISABLE	0x0200 /* Kumeran IBIST Disable */
+#define IGC_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
+#define IGC_KMRNCTRLSTA_K1_CONFIG	0x7
+#define IGC_KMRNCTRLSTA_K1_ENABLE	0x0002 /* enable K1 */
+#define IGC_KMRNCTRLSTA_HD_CTRL	0x10   /* Kumeran HD Control */
+#define IGC_KMRNCTRLSTA_K0S_CTRL	0x1E	/* Kumeran K0s Control */
+#define IGC_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_SHIFT	0
+#define IGC_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_SHIFT	4
+#define IGC_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_MASK	\
+	(3 << IGC_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_SHIFT)
+#define IGC_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_MASK \
+	(7 << IGC_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_SHIFT)
+#define IGC_KMRNCTRLSTA_OP_MODES	0x1F   /* Kumeran Modes of Operation */
+#define IGC_KMRNCTRLSTA_OP_MODES_LSC2CSC	0x0002 /* change LSC to CSC */
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
+#define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Ctrl */
+#define IFE_PHY_SPECIAL_CONTROL_LED	0x1B /* PHY Special and LED Ctrl */
+#define IFE_PHY_MDIX_CONTROL		0x1C /* MDI/MDI-X Control */
+
+/* IFE PHY Extended Status Control */
+#define IFE_PESC_POLARITY_REVERSED	0x0100
+
+/* IFE PHY Special Control */
+#define IFE_PSC_AUTO_POLARITY_DISABLE	0x0010
+#define IFE_PSC_FORCE_POLARITY		0x0020
+
+/* IFE PHY Special Control and LED Control */
+#define IFE_PSCL_PROBE_MODE		0x0020
+#define IFE_PSCL_PROBE_LEDS_OFF		0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON		0x0007 /* Force LEDs 0 and 2 on */
+
+/* IFE PHY MDIX Control */
+#define IFE_PMC_MDIX_STATUS		0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_FORCE_MDIX		0x0040 /* 1=force MDI-X, 0=force MDI */
+#define IFE_PMC_AUTO_MDIX		0x0080 /* 1=enable auto, 0=disable */
+
+/* SFP modules ID memory locations */
+#define IGC_SFF_IDENTIFIER_OFFSET	0x00
+#define IGC_SFF_IDENTIFIER_SFF	0x02
+#define IGC_SFF_IDENTIFIER_SFP	0x03
+
+#define IGC_SFF_ETH_FLAGS_OFFSET	0x06
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct sfp_igc_flags {
+	u8 igc_base_sx:1;
+	u8 igc_base_lx:1;
+	u8 igc_base_cx:1;
+	u8 igc_base_t:1;
+	u8 e100_base_lx:1;
+	u8 e100_base_fx:1;
+	u8 e10_base_bx10:1;
+	u8 e10_base_px:1;
+};
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IGC_SFF_VENDOR_OUI_TYCO	0x00407600
+#define IGC_SFF_VENDOR_OUI_FTL	0x00906500
+#define IGC_SFF_VENDOR_OUI_AVAGO	0x00176A00
+#define IGC_SFF_VENDOR_OUI_INTEL	0x001B2100
+
+#endif
diff --git a/drivers/net/igc/base/igc_regs.h b/drivers/net/igc/base/igc_regs.h
new file mode 100644
index 0000000..ceffe9b
--- /dev/null
+++ b/drivers/net/igc/base/igc_regs.h
@@ -0,0 +1,724 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2019
+ */
+
+#ifndef _IGC_REGS_H_
+#define _IGC_REGS_H_
+
+/* General Register Descriptions */
+#define IGC_CTRL	0x00000  /* Device Control - RW */
+#define IGC_CTRL_DUP	0x00004  /* Device Control Duplicate (Shadow) - RW */
+#define IGC_STATUS	0x00008  /* Device Status - RO */
+#define IGC_EECD	0x00010  /* EEPROM/Flash Control - RW */
+/* NVM  Register Descriptions */
+#define IGC_EERD		0x12014  /* EEprom mode read - RW */
+#define IGC_EEWR		0x12018  /* EEprom mode write - RW */
+#define IGC_CTRL_EXT	0x00018  /* Extended Device Control - RW */
+#define IGC_MDIC	0x00020  /* MDI Control - RW */
+#define IGC_MDICNFG	0x00E04  /* MDI Config - RW */
+#define IGC_REGISTER_SET_SIZE		0x20000 /* CSR Size */
+#define IGC_EEPROM_INIT_CTRL_WORD_2	0x0F /* EEPROM Init Ctrl Word 2 */
+#define IGC_EEPROM_PCIE_CTRL_WORD_2	0x28 /* EEPROM PCIe Ctrl Word 2 */
+#define IGC_BARCTRL			0x5BBC /* BAR ctrl reg */
+#define IGC_BARCTRL_FLSIZE		0x0700 /* BAR ctrl Flsize */
+#define IGC_BARCTRL_CSRSIZE		0x2000 /* BAR ctrl CSR size */
+#define IGC_MPHY_ADDR_CTRL	0x0024 /* GbE MPHY Address Control */
+#define IGC_MPHY_DATA		0x0E10 /* GBE MPHY Data */
+#define IGC_MPHY_STAT		0x0E0C /* GBE MPHY Statistics */
+#define IGC_PPHY_CTRL		0x5b48 /* PCIe PHY Control */
+#define IGC_I350_BARCTRL		0x5BFC /* BAR ctrl reg */
+#define IGC_I350_DTXMXPKTSZ		0x355C /* Maximum sent packet size reg*/
+#define IGC_SCTL	0x00024  /* SerDes Control - RW */
+#define IGC_FCAL	0x00028  /* Flow Control Address Low - RW */
+#define IGC_FCAH	0x0002C  /* Flow Control Address High -RW */
+#define IGC_FEXT	0x0002C  /* Future Extended - RW */
+#define IGC_I225_FLSWCTL	0x12048 /* FLASH control register */
+#define IGC_I225_FLSWDATA	0x1204C /* FLASH data register */
+#define IGC_I225_FLSWCNT	0x12050 /* FLASH Access Counter */
+#define IGC_I225_FLSECU	0x12114 /* FLASH Security */
+#define IGC_FEXTNVM	0x00028  /* Future Extended NVM - RW */
+#define IGC_FEXTNVM3	0x0003C  /* Future Extended NVM 3 - RW */
+#define IGC_FEXTNVM4	0x00024  /* Future Extended NVM 4 - RW */
+#define IGC_FEXTNVM5	0x00014  /* Future Extended NVM 5 - RW */
+#define IGC_FEXTNVM6	0x00010  /* Future Extended NVM 6 - RW */
+#define IGC_FEXTNVM7	0x000E4  /* Future Extended NVM 7 - RW */
+#define IGC_FEXTNVM9	0x5BB4  /* Future Extended NVM 9 - RW */
+#define IGC_FEXTNVM11	0x5BBC  /* Future Extended NVM 11 - RW */
+#define IGC_PCIEANACFG	0x00F18 /* PCIE Analog Config */
+#define IGC_FCT	0x00030  /* Flow Control Type - RW */
+#define IGC_CONNSW	0x00034  /* Copper/Fiber switch control - RW */
+#define IGC_VET	0x00038  /* VLAN Ether Type - RW */
+#define IGC_ICR			0x01500  /* Intr Cause Read - RC/W1C */
+#define IGC_ITR	0x000C4  /* Interrupt Throttling Rate - RW */
+#define IGC_ICS			0x01504  /* Intr Cause Set - WO */
+#define IGC_IMS			0x01508  /* Intr Mask Set/Read - RW */
+#define IGC_IMC			0x0150C  /* Intr Mask Clear - WO */
+#define IGC_IAM			0x01510  /* Intr Ack Auto Mask- RW */
+#define IGC_IVAR	0x000E4  /* Interrupt Vector Allocation Register - RW */
+#define IGC_SVCR	0x000F0
+#define IGC_SVT	0x000F4
+#define IGC_LPIC	0x000FC  /* Low Power IDLE control */
+#define IGC_RCTL	0x00100  /* Rx Control - RW */
+#define IGC_FCTTV	0x00170  /* Flow Control Transmit Timer Value - RW */
+#define IGC_TXCW	0x00178  /* Tx Configuration Word - RW */
+#define IGC_RXCW	0x00180  /* Rx Configuration Word - RO */
+#define IGC_PBA_ECC	0x01100  /* PBA ECC Register */
+#define IGC_EICR	0x01580  /* Ext. Interrupt Cause Read - R/clr */
+#define IGC_EITR(_n)	(0x01680 + (0x4 * (_n)))
+#define IGC_EICS	0x01520  /* Ext. Interrupt Cause Set - W0 */
+#define IGC_EIMS	0x01524  /* Ext. Interrupt Mask Set/Read - RW */
+#define IGC_EIMC	0x01528  /* Ext. Interrupt Mask Clear - WO */
+#define IGC_EIAC	0x0152C  /* Ext. Interrupt Auto Clear - RW */
+#define IGC_EIAM	0x01530  /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define IGC_GPIE	0x01514  /* General Purpose Interrupt Enable - RW */
+#define IGC_IVAR0	0x01700  /* Interrupt Vector Allocation (array) - RW */
+#define IGC_IVAR_MISC	0x01740 /* IVAR for "other" causes - RW */
+#define IGC_TCTL	0x00400  /* Tx Control - RW */
+#define IGC_TCTL_EXT	0x00404  /* Extended Tx Control - RW */
+#define IGC_TIPG	0x00410  /* Tx Inter-packet gap -RW */
+#define IGC_TBT	0x00448  /* Tx Burst Timer - RW */
+#define IGC_AIT	0x00458  /* Adaptive Interframe Spacing Throttle - RW */
+#define IGC_LEDCTL	0x00E00  /* LED Control - RW */
+#define IGC_LEDMUX	0x08130  /* LED MUX Control */
+#define IGC_EXTCNF_CTRL	0x00F00  /* Extended Configuration Control */
+#define IGC_EXTCNF_SIZE	0x00F08  /* Extended Configuration Size */
+#define IGC_PHY_CTRL	0x00F10  /* PHY Control Register in CSR */
+#define IGC_POEMB	IGC_PHY_CTRL /* PHY OEM Bits */
+#define IGC_PBA	0x01000  /* Packet Buffer Allocation - RW */
+#define IGC_PBS	0x01008  /* Packet Buffer Size */
+#define IGC_PBECCSTS	0x0100C  /* Packet Buffer ECC Status - RW */
+#define IGC_IOSFPC	0x00F28  /* TX corrupted data  */
+#define IGC_EEMNGCTL	0x01010  /* MNG EEprom Control */
+#define IGC_EEMNGCTL_I210	0x01010  /* i210 MNG EEprom Mode Control */
+#define IGC_EEMNGCTL_I225	0x01010  /* i225 MNG EEprom Mode Control */
+#define IGC_EEARBC	0x01024  /* EEPROM Auto Read Bus Control */
+#define IGC_EEARBC_I210	0x12024 /* EEPROM Auto Read Bus Control */
+#define IGC_EEARBC_I225	0x12024 /* EEPROM Auto Read Bus Control */
+#define IGC_FLASHT	0x01028  /* FLASH Timer Register */
+#define IGC_FLSWCTL	0x01030  /* FLASH control register */
+#define IGC_FLSWDATA	0x01034  /* FLASH data register */
+#define IGC_FLSWCNT	0x01038  /* FLASH Access Counter */
+#define IGC_FLOP	0x0103C  /* FLASH Opcode Register */
+#define IGC_I2CCMD	0x01028  /* SFPI2C Command Register - RW */
+#define IGC_I2CPARAMS	0x0102C /* SFPI2C Parameters Register - RW */
+#define IGC_I2CBB_EN	0x00000100  /* I2C - Bit Bang Enable */
+#define IGC_I2C_CLK_OUT	0x00000200  /* I2C- Clock */
+#define IGC_I2C_DATA_OUT	0x00000400  /* I2C- Data Out */
+#define IGC_I2C_DATA_OE_N	0x00000800  /* I2C- Data Output Enable */
+#define IGC_I2C_DATA_IN	0x00001000  /* I2C- Data In */
+#define IGC_I2C_CLK_OE_N	0x00002000  /* I2C- Clock Output Enable */
+#define IGC_I2C_CLK_IN	0x00004000  /* I2C- Clock In */
+#define IGC_I2C_CLK_STRETCH_DIS	0x00008000 /* I2C- Dis Clk Stretching */
+#define IGC_WDSTP	0x01040  /* Watchdog Setup - RW */
+#define IGC_SWDSTS	0x01044  /* SW Device Status - RW */
+#define IGC_FRTIMER	0x01048  /* Free Running Timer - RW */
+#define IGC_TCPTIMER	0x0104C  /* TCP Timer - RW */
+#define IGC_VPDDIAG	0x01060  /* VPD Diagnostic - RO */
+#define IGC_ICR_V2	0x01500  /* Intr Cause - new location - RC */
+#define IGC_ICS_V2	0x01504  /* Intr Cause Set - new location - WO */
+#define IGC_IMS_V2	0x01508  /* Intr Mask Set/Read - new location - RW */
+#define IGC_IMC_V2	0x0150C  /* Intr Mask Clear - new location - WO */
+#define IGC_IAM_V2	0x01510  /* Intr Ack Auto Mask - new location - RW */
+#define IGC_ERT	0x02008  /* Early Rx Threshold - RW */
+#define IGC_FCRTL	0x02160  /* Flow Control Receive Threshold Low - RW */
+#define IGC_FCRTH	0x02168  /* Flow Control Receive Threshold High - RW */
+#define IGC_PSRCTL	0x02170  /* Packet Split Receive Control - RW */
+#define IGC_RDFH	0x02410  /* Rx Data FIFO Head - RW */
+#define IGC_RDFT	0x02418  /* Rx Data FIFO Tail - RW */
+#define IGC_RDFHS	0x02420  /* Rx Data FIFO Head Saved - RW */
+#define IGC_RDFTS	0x02428  /* Rx Data FIFO Tail Saved - RW */
+#define IGC_RDFPC	0x02430  /* Rx Data FIFO Packet Count - RW */
+#define IGC_PBRTH	0x02458  /* PB Rx Arbitration Threshold - RW */
+#define IGC_FCRTV	0x02460  /* Flow Control Refresh Timer Value - RW */
+/* Split and Replication Rx Control - RW */
+#define IGC_RDPUMB	0x025CC  /* DMA Rx Descriptor uC Mailbox - RW */
+#define IGC_RDPUAD	0x025D0  /* DMA Rx Descriptor uC Addr Command - RW */
+#define IGC_RDPUWD	0x025D4  /* DMA Rx Descriptor uC Data Write - RW */
+#define IGC_RDPURD	0x025D8  /* DMA Rx Descriptor uC Data Read - RW */
+#define IGC_RDPUCTL	0x025DC  /* DMA Rx Descriptor uC Control - RW */
+#define IGC_PBDIAG	0x02458  /* Packet Buffer Diagnostic - RW */
+#define IGC_RXPBS	0x02404  /* Rx Packet Buffer Size - RW */
+#define IGC_IRPBS	0x02404 /* Same as RXPBS, renamed for newer Si - RW */
+#define IGC_PBRWAC	0x024E8 /* Rx packet buffer wrap around counter - RO */
+#define IGC_RDTR	0x02820  /* Rx Delay Timer - RW */
+#define IGC_RADV	0x0282C  /* Rx Interrupt Absolute Delay Timer - RW */
+#define IGC_EMIADD	0x10     /* Extended Memory Indirect Address */
+#define IGC_EMIDATA	0x11     /* Extended Memory Indirect Data */
+/* Shadow Ram Write Register - RW */
+#define IGC_SRWR		0x12018
+#define IGC_EEC_REG		0x12010
+
+#define IGC_I210_FLMNGCTL	0x12038
+#define IGC_I210_FLMNGDATA	0x1203C
+#define IGC_I210_FLMNGCNT	0x12040
+
+#define IGC_I210_FLSWCTL	0x12048
+#define IGC_I210_FLSWDATA	0x1204C
+#define IGC_I210_FLSWCNT	0x12050
+
+#define IGC_I210_FLA		0x1201C
+
+#define IGC_SHADOWINF		0x12068
+#define IGC_FLFWUPDATE	0x12108
+
+#define IGC_INVM_DATA_REG(_n)	(0x12120 + 4 * (_n))
+#define IGC_INVM_SIZE		64 /* Number of INVM Data Registers */
+
+/* QAV Tx mode control register */
+#define IGC_I210_TQAVCTRL	0x3570
+
+/* QAV Tx mode control register bitfields masks */
+/* QAV enable */
+#define IGC_TQAVCTRL_MODE			(1 << 0)
+/* Fetching arbitration type */
+#define IGC_TQAVCTRL_FETCH_ARB		(1 << 4)
+/* Fetching timer enable */
+#define IGC_TQAVCTRL_FETCH_TIMER_ENABLE	(1 << 5)
+/* Launch arbitration type */
+#define IGC_TQAVCTRL_LAUNCH_ARB		(1 << 8)
+/* Launch timer enable */
+#define IGC_TQAVCTRL_LAUNCH_TIMER_ENABLE	(1 << 9)
+/* SP waits for SR enable */
+#define IGC_TQAVCTRL_SP_WAIT_SR		(1 << 10)
+/* Fetching timer correction */
+#define IGC_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET	16
+#define IGC_TQAVCTRL_FETCH_TIMER_DELTA	\
+			(0xFFFF << IGC_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET)
+
+/* High credit registers where _n can be 0 or 1. */
+#define IGC_I210_TQAVHC(_n)			(0x300C + 0x40 * (_n))
+
+/* Queues fetch arbitration priority control register */
+#define IGC_I210_TQAVARBCTRL			0x3574
+/* Queues priority masks where _n and _p can be 0-3. */
+#define IGC_TQAVARBCTRL_QUEUE_PRI(_n, _p)	((_p) << (2 * (_n)))
+/* QAV Tx mode control registers where _n can be 0 or 1. */
+#define IGC_I210_TQAVCC(_n)			(0x3004 + 0x40 * (_n))
+
+/* QAV Tx mode control register bitfields masks */
+#define IGC_TQAVCC_IDLE_SLOPE		0xFFFF /* Idle slope */
+#define IGC_TQAVCC_KEEP_CREDITS	(1 << 30) /* Keep credits opt enable */
+#define IGC_TQAVCC_QUEUE_MODE		(1 << 31) /* SP vs. SR Tx mode */
+
+/* Good transmitted packets counter registers */
+#define IGC_PQGPTC(_n)		(0x010014 + (0x100 * (_n)))
+
+/* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */
+#define IGC_I210_TXPBS_SIZE(_n, _s)	((_s) << (6 * (_n)))
+
+#define IGC_MMDAC			13 /* MMD Access Control */
+#define IGC_MMDAAD			14 /* MMD Access Address/Data */
+
+/* Convenience macros
+ *
+ * Note: "_n" is the queue number of the register
+ *
+ * Example usage:
+ * IGC_RDBAL_REG(current_rx_queue)
+ */
+#define IGC_QUEUE_REG(n, low, high) (	\
+	__extension__ ({			\
+		typeof(n) _n = (n);		\
+		_n < 4 ? ((low) + _n * 0x100) : ((high) + _n * 0x40);	\
+	}))
+
+#define IGC_RDBAL(_n)		IGC_QUEUE_REG(_n, 0x02800, 0x0C000)
+#define IGC_RDBAH(_n)		IGC_QUEUE_REG(_n, 0x02804, 0x0C004)
+#define IGC_RDLEN(_n)		IGC_QUEUE_REG(_n, 0x02808, 0x0C008)
+#define IGC_SRRCTL(_n)		IGC_QUEUE_REG(_n, 0x0280C, 0x0C00C)
+#define IGC_RDH(_n)		IGC_QUEUE_REG(_n, 0x02810, 0x0C010)
+#define IGC_RXCTL(_n)		IGC_QUEUE_REG(_n, 0x02814, 0x0C014)
+#define IGC_DCA_RXCTRL(_n)	IGC_RXCTL(_n)
+#define IGC_RDT(_n)		IGC_QUEUE_REG(_n, 0x02818, 0x0C018)
+#define IGC_RXDCTL(_n)		IGC_QUEUE_REG(_n, 0x02828, 0x0C028)
+#define IGC_RQDPC(_n)		IGC_QUEUE_REG(_n, 0x02830, 0x0C030)
+#define IGC_TDBAL(_n)		IGC_QUEUE_REG(_n, 0x03800, 0x0E000)
+#define IGC_TDBAH(_n)		IGC_QUEUE_REG(_n, 0x03804, 0x0E004)
+#define IGC_TDLEN(_n)		IGC_QUEUE_REG(_n, 0x03808, 0x0E008)
+#define IGC_TDH(_n)		IGC_QUEUE_REG(_n, 0x03810, 0x0E010)
+#define IGC_TXCTL(_n)		IGC_QUEUE_REG(_n, 0x03814, 0x0E014)
+#define IGC_DCA_TXCTRL(_n)	IGC_TXCTL(_n)
+#define IGC_TDT(_n)		IGC_QUEUE_REG(_n, 0x03818, 0x0E018)
+#define IGC_TXDCTL(_n)		IGC_QUEUE_REG(_n, 0x03828, 0x0E028)
+#define IGC_TDWBAL(_n)		IGC_QUEUE_REG(_n, 0x03838, 0x0E038)
+#define IGC_TDWBAH(_n)		IGC_QUEUE_REG(_n, 0x0383C, 0x0E03C)
+#define IGC_TARC(_n)		(0x03840 + (_n) * 0x100)
+#define IGC_RSRPD		0x02C00  /* Rx Small Packet Detect - RW */
+#define IGC_RAID		0x02C08  /* Receive Ack Interrupt Delay - RW */
+#define IGC_TXDMAC		0x03000  /* Tx DMA Control - RW */
+#define IGC_KABGTXD		0x03004  /* AFE Band Gap Transmit Ref Data */
+#define IGC_PSRTYPE(_i)	(0x05480 + ((_i) * 4))
+
+#define IGC_RAL(n)		(	\
+	__extension__ ({		\
+		typeof(n) _n = (n);	\
+		_n < 16 ? (0x05400 + _n * 8) : (0x054E0 + (_n - 16) * 8); \
+	}))
+
+#define IGC_RAH(_n)		(IGC_RAL(_n) + 4)
+
+#define IGC_VLAPQF		0x055B0  /* VLAN Priority Queue Filter VLAPQF */
+
+#define IGC_SHRAL(_i)		(0x05438 + ((_i) * 8))
+#define IGC_SHRAH(_i)		(0x0543C + ((_i) * 8))
+#define IGC_IP4AT_REG(_i)	(0x05840 + ((_i) * 8))
+#define IGC_IP6AT_REG(_i)	(0x05880 + ((_i) * 4))
+#define IGC_WUPM_REG(_i)	(0x05A00 + ((_i) * 4))
+#define IGC_FFMT_REG(_i)	(0x09000 + ((_i) * 8))
+#define IGC_FFVT_REG(_i)	(0x09800 + ((_i) * 8))
+#define IGC_FFLT_REG(_i)	(0x05F00 + ((_i) * 8))
+#define IGC_PBSLAC		0x03100  /* Pkt Buffer Slave Access Control */
+#define IGC_PBSLAD(_n)	(0x03110 + (0x4 * (_n)))  /* Pkt Buffer DWORD */
+#define IGC_TXPBS		0x03404  /* Tx Packet Buffer Size - RW */
+/* Same as TXPBS, renamed for newer Si - RW */
+#define IGC_ITPBS		0x03404
+#define IGC_TDFH		0x03410  /* Tx Data FIFO Head - RW */
+#define IGC_TDFT		0x03418  /* Tx Data FIFO Tail - RW */
+#define IGC_TDFHS		0x03420  /* Tx Data FIFO Head Saved - RW */
+#define IGC_TDFTS		0x03428  /* Tx Data FIFO Tail Saved - RW */
+#define IGC_TDFPC		0x03430  /* Tx Data FIFO Packet Count - RW */
+#define IGC_TDPUMB		0x0357C  /* DMA Tx Desc uC Mail Box - RW */
+#define IGC_TDPUAD		0x03580  /* DMA Tx Desc uC Addr Command - RW */
+#define IGC_TDPUWD		0x03584  /* DMA Tx Desc uC Data Write - RW */
+#define IGC_TDPURD		0x03588  /* DMA Tx Desc uC Data  Read  - RW */
+#define IGC_TDPUCTL		0x0358C  /* DMA Tx Desc uC Control - RW */
+#define IGC_DTXCTL		0x03590  /* DMA Tx Control - RW */
+#define IGC_DTXTCPFLGL	0x0359C /* DMA Tx Control flag low - RW */
+#define IGC_DTXTCPFLGH	0x035A0 /* DMA Tx Control flag high - RW */
+/* DMA Tx Max Total Allow Size Reqs - RW */
+#define IGC_DTXMXSZRQ		0x03540
+#define IGC_TIDV	0x03820  /* Tx Interrupt Delay Value - RW */
+#define IGC_TADV	0x0382C  /* Tx Interrupt Absolute Delay Val - RW */
+#define IGC_TSPMT	0x03830  /* TCP Segmentation PAD & Min Threshold - RW */
+/* Statistics Register Descriptions */
+#define IGC_CRCERRS	0x04000  /* CRC Error Count - R/clr */
+#define IGC_ALGNERRC	0x04004  /* Alignment Error Count - R/clr */
+#define IGC_SYMERRS	0x04008  /* Symbol Error Count - R/clr */
+#define IGC_RXERRC	0x0400C  /* Receive Error Count - R/clr */
+#define IGC_MPC	0x04010  /* Missed Packet Count - R/clr */
+#define IGC_SCC	0x04014  /* Single Collision Count - R/clr */
+#define IGC_ECOL	0x04018  /* Excessive Collision Count - R/clr */
+#define IGC_MCC	0x0401C  /* Multiple Collision Count - R/clr */
+#define IGC_LATECOL	0x04020  /* Late Collision Count - R/clr */
+#define IGC_COLC	0x04028  /* Collision Count - R/clr */
+#define IGC_DC	0x04030  /* Defer Count - R/clr */
+#define IGC_TNCRS	0x04034  /* Tx-No CRS - R/clr */
+#define IGC_SEC	0x04038  /* Sequence Error Count - R/clr */
+#define IGC_CEXTERR	0x0403C  /* Carrier Extension Error Count - R/clr */
+#define IGC_RLEC	0x04040  /* Receive Length Error Count - R/clr */
+#define IGC_XONRXC	0x04048  /* XON Rx Count - R/clr */
+#define IGC_XONTXC	0x0404C  /* XON Tx Count - R/clr */
+#define IGC_XOFFRXC	0x04050  /* XOFF Rx Count - R/clr */
+#define IGC_XOFFTXC	0x04054  /* XOFF Tx Count - R/clr */
+#define IGC_FCRUC	0x04058  /* Flow Control Rx Unsupported Count- R/clr */
+#define IGC_PRC64	0x0405C  /* Packets Rx (64 bytes) - R/clr */
+#define IGC_PRC127	0x04060  /* Packets Rx (65-127 bytes) - R/clr */
+#define IGC_PRC255	0x04064  /* Packets Rx (128-255 bytes) - R/clr */
+#define IGC_PRC511	0x04068  /* Packets Rx (255-511 bytes) - R/clr */
+#define IGC_PRC1023	0x0406C  /* Packets Rx (512-1023 bytes) - R/clr */
+#define IGC_PRC1522	0x04070  /* Packets Rx (1024-1522 bytes) - R/clr */
+#define IGC_GPRC	0x04074  /* Good Packets Rx Count - R/clr */
+#define IGC_BPRC	0x04078  /* Broadcast Packets Rx Count - R/clr */
+#define IGC_MPRC	0x0407C  /* Multicast Packets Rx Count - R/clr */
+#define IGC_GPTC	0x04080  /* Good Packets Tx Count - R/clr */
+#define IGC_GORCL	0x04088  /* Good Octets Rx Count Low - R/clr */
+#define IGC_GORCH	0x0408C  /* Good Octets Rx Count High - R/clr */
+#define IGC_GOTCL	0x04090  /* Good Octets Tx Count Low - R/clr */
+#define IGC_GOTCH	0x04094  /* Good Octets Tx Count High - R/clr */
+#define IGC_RNBC	0x040A0  /* Rx No Buffers Count - R/clr */
+#define IGC_RUC	0x040A4  /* Rx Undersize Count - R/clr */
+#define IGC_RFC	0x040A8  /* Rx Fragment Count - R/clr */
+#define IGC_ROC	0x040AC  /* Rx Oversize Count - R/clr */
+#define IGC_RJC	0x040B0  /* Rx Jabber Count - R/clr */
+#define IGC_MGTPRC	0x040B4  /* Management Packets Rx Count - R/clr */
+#define IGC_MGTPDC	0x040B8  /* Management Packets Dropped Count - R/clr */
+#define IGC_MGTPTC	0x040BC  /* Management Packets Tx Count - R/clr */
+#define IGC_TORL	0x040C0  /* Total Octets Rx Low - R/clr */
+#define IGC_TORH	0x040C4  /* Total Octets Rx High - R/clr */
+#define IGC_TOTL	0x040C8  /* Total Octets Tx Low - R/clr */
+#define IGC_TOTH	0x040CC  /* Total Octets Tx High - R/clr */
+#define IGC_TPR	0x040D0  /* Total Packets Rx - R/clr */
+#define IGC_TPT	0x040D4  /* Total Packets Tx - R/clr */
+#define IGC_PTC64	0x040D8  /* Packets Tx (64 bytes) - R/clr */
+#define IGC_PTC127	0x040DC  /* Packets Tx (65-127 bytes) - R/clr */
+#define IGC_PTC255	0x040E0  /* Packets Tx (128-255 bytes) - R/clr */
+#define IGC_PTC511	0x040E4  /* Packets Tx (256-511 bytes) - R/clr */
+#define IGC_PTC1023	0x040E8  /* Packets Tx (512-1023 bytes) - R/clr */
+#define IGC_PTC1522	0x040EC  /* Packets Tx (1024-1522 Bytes) - R/clr */
+#define IGC_MPTC	0x040F0  /* Multicast Packets Tx Count - R/clr */
+#define IGC_BPTC	0x040F4  /* Broadcast Packets Tx Count - R/clr */
+#define IGC_TSCTC	0x040F8  /* TCP Segmentation Context Tx - R/clr */
+#define IGC_TSCTFC	0x040FC  /* TCP Segmentation Context Tx Fail - R/clr */
+#define IGC_IAC	0x04100  /* Interrupt Assertion Count */
+/* Interrupt Cause */
+#define IGC_ICRXPTC	0x04104  /* Interrupt Cause Rx Pkt Timer Expire Count */
+#define IGC_ICRXATC	0x04108  /* Interrupt Cause Rx Abs Timer Expire Count */
+#define IGC_ICTXPTC	0x0410C  /* Interrupt Cause Tx Pkt Timer Expire Count */
+#define IGC_ICTXATC	0x04110  /* Interrupt Cause Tx Abs Timer Expire Count */
+#define IGC_ICTXQEC	0x04118  /* Interrupt Cause Tx Queue Empty Count */
+#define IGC_ICTXQMTC	0x0411C  /* Interrupt Cause Tx Queue Min Thresh Count */
+#define IGC_ICRXDMTC	0x04120  /* Interrupt Cause Rx Desc Min Thresh Count */
+#define IGC_ICRXOC	0x04124  /* Interrupt Cause Receiver Overrun Count */
+#define IGC_CRC_OFFSET	0x05F50  /* CRC Offset register */
+
+#define IGC_VFGPRC	0x00F10
+#define IGC_VFGORC	0x00F18
+#define IGC_VFMPRC	0x00F3C
+#define IGC_VFGPTC	0x00F14
+#define IGC_VFGOTC	0x00F34
+#define IGC_VFGOTLBC	0x00F50
+#define IGC_VFGPTLBC	0x00F44
+#define IGC_VFGORLBC	0x00F48
+#define IGC_VFGPRLBC	0x00F40
+/* Virtualization statistical counters */
+#define IGC_PFVFGPRC(_n)	(0x010010 + (0x100 * (_n)))
+#define IGC_PFVFGPTC(_n)	(0x010014 + (0x100 * (_n)))
+#define IGC_PFVFGORC(_n)	(0x010018 + (0x100 * (_n)))
+#define IGC_PFVFGOTC(_n)	(0x010034 + (0x100 * (_n)))
+#define IGC_PFVFMPRC(_n)	(0x010038 + (0x100 * (_n)))
+#define IGC_PFVFGPRLBC(_n)	(0x010040 + (0x100 * (_n)))
+#define IGC_PFVFGPTLBC(_n)	(0x010044 + (0x100 * (_n)))
+#define IGC_PFVFGORLBC(_n)	(0x010048 + (0x100 * (_n)))
+#define IGC_PFVFGOTLBC(_n)	(0x010050 + (0x100 * (_n)))
+
+/* LinkSec */
+#define IGC_LSECTXUT		0x04300  /* Tx Untagged Pkt Cnt */
+#define IGC_LSECTXPKTE	0x04304  /* Encrypted Tx Pkts Cnt */
+#define IGC_LSECTXPKTP	0x04308  /* Protected Tx Pkt Cnt */
+#define IGC_LSECTXOCTE	0x0430C  /* Encrypted Tx Octets Cnt */
+#define IGC_LSECTXOCTP	0x04310  /* Protected Tx Octets Cnt */
+#define IGC_LSECRXUT		0x04314  /* Untagged non-Strict Rx Pkt Cnt */
+#define IGC_LSECRXOCTD	0x0431C  /* Rx Octets Decrypted Count */
+#define IGC_LSECRXOCTV	0x04320  /* Rx Octets Validated */
+#define IGC_LSECRXBAD		0x04324  /* Rx Bad Tag */
+#define IGC_LSECRXNOSCI	0x04328  /* Rx Packet No SCI Count */
+#define IGC_LSECRXUNSCI	0x0432C  /* Rx Packet Unknown SCI Count */
+#define IGC_LSECRXUNCH	0x04330  /* Rx Unchecked Packets Count */
+#define IGC_LSECRXDELAY	0x04340  /* Rx Delayed Packet Count */
+#define IGC_LSECRXLATE	0x04350  /* Rx Late Packets Count */
+#define IGC_LSECRXOK(_n)	(0x04360 + (0x04 * (_n))) /* Rx Pkt OK Cnt */
+#define IGC_LSECRXINV(_n)	(0x04380 + (0x04 * (_n))) /* Rx Invalid Cnt */
+#define IGC_LSECRXNV(_n)	(0x043A0 + (0x04 * (_n))) /* Rx Not Valid Cnt */
+#define IGC_LSECRXUNSA	0x043C0  /* Rx Unused SA Count */
+#define IGC_LSECRXNUSA	0x043D0  /* Rx Not Using SA Count */
+#define IGC_LSECTXCAP		0x0B000  /* Tx Capabilities Register - RO */
+#define IGC_LSECRXCAP		0x0B300  /* Rx Capabilities Register - RO */
+#define IGC_LSECTXCTRL	0x0B004  /* Tx Control - RW */
+#define IGC_LSECRXCTRL	0x0B304  /* Rx Control - RW */
+#define IGC_LSECTXSCL		0x0B008  /* Tx SCI Low - RW */
+#define IGC_LSECTXSCH		0x0B00C  /* Tx SCI High - RW */
+#define IGC_LSECTXSA		0x0B010  /* Tx SA0 - RW */
+#define IGC_LSECTXPN0		0x0B018  /* Tx SA PN 0 - RW */
+#define IGC_LSECTXPN1		0x0B01C  /* Tx SA PN 1 - RW */
+#define IGC_LSECRXSCL		0x0B3D0  /* Rx SCI Low - RW */
+#define IGC_LSECRXSCH		0x0B3E0  /* Rx SCI High - RW */
+/* LinkSec Tx 128-bit Key 0 - WO */
+#define IGC_LSECTXKEY0(_n)	(0x0B020 + (0x04 * (_n)))
+/* LinkSec Tx 128-bit Key 1 - WO */
+#define IGC_LSECTXKEY1(_n)	(0x0B030 + (0x04 * (_n)))
+#define IGC_LSECRXSA(_n)	(0x0B310 + (0x04 * (_n))) /* Rx SAs - RW */
+#define IGC_LSECRXPN(_n)	(0x0B330 + (0x04 * (_n))) /* Rx SAs - RW */
+/* LinkSec Rx Keys  - where _n is the SA no. and _m the 4 dwords of the 128 bit
+ * key - RW.
+ */
+#define IGC_LSECRXKEY(_n, _m)	(0x0B350 + (0x10 * (_n)) + (0x04 * (_m)))
+
+#define IGC_SSVPC		0x041A0 /* Switch Security Violation Pkt Cnt */
+#define IGC_IPSCTRL		0xB430  /* IpSec Control Register */
+#define IGC_IPSRXCMD		0x0B408 /* IPSec Rx Command Register - RW */
+#define IGC_IPSRXIDX		0x0B400 /* IPSec Rx Index - RW */
+/* IPSec Rx IPv4/v6 Address - RW */
+#define IGC_IPSRXIPADDR(_n)	(0x0B420 + (0x04 * (_n)))
+/* IPSec Rx 128-bit Key - RW */
+#define IGC_IPSRXKEY(_n)	(0x0B410 + (0x04 * (_n)))
+#define IGC_IPSRXSALT		0x0B404  /* IPSec Rx Salt - RW */
+#define IGC_IPSRXSPI		0x0B40C  /* IPSec Rx SPI - RW */
+/* IPSec Tx 128-bit Key - RW */
+#define IGC_IPSTXKEY(_n)	(0x0B460 + (0x04 * (_n)))
+#define IGC_IPSTXSALT		0x0B454  /* IPSec Tx Salt - RW */
+#define IGC_IPSTXIDX		0x0B450  /* IPSec Tx SA IDX - RW */
+#define IGC_PCS_CFG0	0x04200  /* PCS Configuration 0 - RW */
+#define IGC_PCS_LCTL	0x04208  /* PCS Link Control - RW */
+#define IGC_PCS_LSTAT	0x0420C  /* PCS Link Status - RO */
+#define IGC_CBTMPC	0x0402C  /* Circuit Breaker Tx Packet Count */
+#define IGC_HTDPMC	0x0403C  /* Host Transmit Discarded Packets */
+#define IGC_CBRDPC	0x04044  /* Circuit Breaker Rx Dropped Count */
+#define IGC_CBRMPC	0x040FC  /* Circuit Breaker Rx Packet Count */
+#define IGC_RPTHC	0x04104  /* Rx Packets To Host */
+#define IGC_HGPTC	0x04118  /* Host Good Packets Tx Count */
+#define IGC_HTCBDPC	0x04124  /* Host Tx Circuit Breaker Dropped Count */
+#define IGC_HGORCL	0x04128  /* Host Good Octets Received Count Low */
+#define IGC_HGORCH	0x0412C  /* Host Good Octets Received Count High */
+#define IGC_HGOTCL	0x04130  /* Host Good Octets Transmit Count Low */
+#define IGC_HGOTCH	0x04134  /* Host Good Octets Transmit Count High */
+#define IGC_LENERRS	0x04138  /* Length Errors Count */
+#define IGC_SCVPC	0x04228  /* SerDes/SGMII Code Violation Pkt Count */
+#define IGC_HRMPC	0x0A018  /* Header Redirection Missed Packet Count */
+#define IGC_PCS_ANADV	0x04218  /* AN advertisement - RW */
+#define IGC_PCS_LPAB	0x0421C  /* Link Partner Ability - RW */
+#define IGC_PCS_NPTX	0x04220  /* AN Next Page Transmit - RW */
+#define IGC_PCS_LPABNP	0x04224 /* Link Partner Ability Next Pg - RW */
+#define IGC_RXCSUM	0x05000  /* Rx Checksum Control - RW */
+#define IGC_RLPML	0x05004  /* Rx Long Packet Max Length */
+#define IGC_RFCTL	0x05008  /* Receive Filter Control*/
+#define IGC_MTA	0x05200  /* Multicast Table Array - RW Array */
+#define IGC_RA	0x05400  /* Receive Address - RW Array */
+#define IGC_RA2	0x054E0  /* 2nd half of Rx address array - RW Array */
+#define IGC_VFTA	0x05600  /* VLAN Filter Table Array - RW Array */
+#define IGC_VT_CTL	0x0581C  /* VMDq Control - RW */
+#define IGC_CIAA	0x05B88  /* Config Indirect Access Address - RW */
+#define IGC_CIAD	0x05B8C  /* Config Indirect Access Data - RW */
+#define IGC_VFQA0	0x0B000  /* VLAN Filter Queue Array 0 - RW Array */
+#define IGC_VFQA1	0x0B200  /* VLAN Filter Queue Array 1 - RW Array */
+#define IGC_WUC	0x05800  /* Wakeup Control - RW */
+#define IGC_WUFC	0x05808  /* Wakeup Filter Control - RW */
+#define IGC_WUS	0x05810  /* Wakeup Status - RO */
+/* Management registers */
+#define IGC_MANC	0x05820  /* Management Control - RW */
+#define IGC_IPAV	0x05838  /* IP Address Valid - RW */
+#define IGC_IP4AT	0x05840  /* IPv4 Address Table - RW Array */
+#define IGC_IP6AT	0x05880  /* IPv6 Address Table - RW Array */
+#define IGC_WUPL	0x05900  /* Wakeup Packet Length - RW */
+#define IGC_WUPM	0x05A00  /* Wakeup Packet Memory - RO A */
+#define IGC_WUPM_EXT	0x0B800  /* Wakeup Packet Memory Extended - RO Array */
+#define IGC_WUFC_EXT	0x0580C  /* Wakeup Filter Control Extended - RW */
+#define IGC_WUS_EXT	0x05814  /* Wakeup Status Extended - RW1C */
+#define IGC_FHFTSL	0x05804  /* Flex Filter Indirect Table Select - RW */
+#define IGC_PROXYFCEX	0x05590  /* Proxy Filter Control Extended - RW1C */
+#define IGC_PROXYEXS	0x05594  /* Proxy Extended Status - RO */
+#define IGC_WFUTPF	0x05500  /* Wake Flex UDP TCP Port Filter - RW Array */
+#define IGC_RFUTPF	0x05580  /* Range Flex UDP TCP Port Filter - RW */
+#define IGC_RWPFC	0x05584  /* Range Wake Port Filter Control - RW */
+#define IGC_WFUTPS	0x05588  /* Wake Filter UDP TCP Status - RW1C */
+#define IGC_WCS	0x0558C  /* Wake Control Status - RW1C */
+/* MSI-X Table Register Descriptions */
+#define IGC_PBACL	0x05B68  /* MSIx PBA Clear - Read/Write 1's to clear */
+#define IGC_FFLT	0x05F00  /* Flexible Filter Length Table - RW Array */
+#define IGC_HOST_IF	0x08800  /* Host Interface */
+#define IGC_HIBBA	0x8F40   /* Host Interface Buffer Base Address */
+/* Flexible Host Filter Table */
+#define IGC_FHFT(_n)	(0x09000 + ((_n) * 0x100))
+/* Ext Flexible Host Filter Table */
+#define IGC_FHFT_EXT(_n)	(0x09A00 + ((_n) * 0x100))
+
+
+#define IGC_KMRNCTRLSTA	0x00034 /* MAC-PHY interface - RW */
+#define IGC_MANC2H		0x05860 /* Management Control To Host - RW */
+/* Management Decision Filters */
+#define IGC_MDEF(_n)		(0x05890 + (4 * (_n)))
+/* Semaphore registers */
+#define IGC_SW_FW_SYNC	0x05B5C /* SW-FW Synchronization - RW */
+#define IGC_CCMCTL	0x05B48 /* CCM Control Register */
+#define IGC_GIOCTL	0x05B44 /* GIO Analog Control Register */
+#define IGC_SCCTL	0x05B4C /* PCIc PLL Configuration Register */
+/* PCIe Register Description */
+#define IGC_GCR	0x05B00 /* PCI-Ex Control */
+#define IGC_GCR2	0x05B64 /* PCI-Ex Control #2 */
+#define IGC_GSCL_1	0x05B10 /* PCI-Ex Statistic Control #1 */
+#define IGC_GSCL_2	0x05B14 /* PCI-Ex Statistic Control #2 */
+#define IGC_GSCL_3	0x05B18 /* PCI-Ex Statistic Control #3 */
+#define IGC_GSCL_4	0x05B1C /* PCI-Ex Statistic Control #4 */
+/* Function Active and Power State to MNG */
+#define IGC_FACTPS	0x05B30
+#define IGC_SWSM	0x05B50 /* SW Semaphore */
+#define IGC_FWSM	0x05B54 /* FW Semaphore */
+/* Driver-only SW semaphore (not used by BOOT agents) */
+#define IGC_SWSM2	0x05B58
+#define IGC_DCA_ID	0x05B70 /* DCA Requester ID Information - RO */
+#define IGC_DCA_CTRL	0x05B74 /* DCA Control - RW */
+#define IGC_UFUSE	0x05B78 /* UFUSE - RO */
+#define IGC_FFLT_DBG	0x05F04 /* Debug Register */
+#define IGC_HICR	0x08F00 /* Host Interface Control */
+#define IGC_FWSTS	0x08F0C /* FW Status */
+
+/* RSS registers */
+#define IGC_CPUVEC	0x02C10 /* CPU Vector Register - RW */
+#define IGC_MRQC	0x05818 /* Multiple Receive Control - RW */
+#define IGC_IMIR(_i)	(0x05A80 + ((_i) * 4))  /* Immediate Interrupt */
+#define IGC_IMIREXT(_i)	(0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/
+#define IGC_IMIRVP		0x05AC0 /* Immediate INT Rx VLAN Priority -RW */
+#define IGC_MSIXBM(_i)	(0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */
+/* Redirection Table - RW Array */
+#define IGC_RETA(_i)	(0x05C00 + ((_i) * 4))
+/* RSS Random Key - RW Array */
+#define IGC_RSSRK(_i)	(0x05C80 + ((_i) * 4))
+#define IGC_RSSIM	0x05864 /* RSS Interrupt Mask */
+#define IGC_RSSIR	0x05868 /* RSS Interrupt Request */
+#define IGC_UTA	0x0A000 /* Unicast Table Array - RW */
+/* VT Registers */
+#define IGC_SWPBS	0x03004 /* Switch Packet Buffer Size - RW */
+#define IGC_MBVFICR	0x00C80 /* Mailbox VF Cause - RWC */
+#define IGC_MBVFIMR	0x00C84 /* Mailbox VF int Mask - RW */
+#define IGC_VFLRE	0x00C88 /* VF Register Events - RWC */
+#define IGC_VFRE	0x00C8C /* VF Receive Enables */
+#define IGC_VFTE	0x00C90 /* VF Transmit Enables */
+#define IGC_QDE	0x02408 /* Queue Drop Enable - RW */
+#define IGC_DTXSWC	0x03500 /* DMA Tx Switch Control - RW */
+#define IGC_WVBR	0x03554 /* VM Wrong Behavior - RWS */
+#define IGC_RPLOLR	0x05AF0 /* Replication Offload - RW */
+#define IGC_IOVTCL	0x05BBC /* IOV Control Register */
+#define IGC_VMRCTL	0X05D80 /* Virtual Mirror Rule Control */
+#define IGC_VMRVLAN	0x05D90 /* Virtual Mirror Rule VLAN */
+#define IGC_VMRVM	0x05DA0 /* Virtual Mirror Rule VM */
+#define IGC_MDFB	0x03558 /* Malicious Driver free block */
+#define IGC_LVMMC	0x03548 /* Last VM Misbehavior cause */
+#define IGC_TXSWC	0x05ACC /* Tx Switch Control */
+#define IGC_SCCRL	0x05DB0 /* Storm Control Control */
+#define IGC_BSCTRH	0x05DB8 /* Broadcast Storm Control Threshold */
+#define IGC_MSCTRH	0x05DBC /* Multicast Storm Control Threshold */
+/* These act per VF so an array friendly macro is used */
+#define IGC_V2PMAILBOX(_n)	(0x00C40 + (4 * (_n)))
+#define IGC_P2VMAILBOX(_n)	(0x00C00 + (4 * (_n)))
+#define IGC_VMBMEM(_n)	(0x00800 + (64 * (_n)))
+#define IGC_VFVMBMEM(_n)	(0x00800 + (_n))
+#define IGC_VMOLR(_n)		(0x05AD0 + (4 * (_n)))
+/* VLAN Virtual Machine Filter - RW */
+#define IGC_VLVF(_n)		(0x05D00 + (4 * (_n)))
+#define IGC_VMVIR(_n)		(0x03700 + (4 * (_n)))
+#define IGC_DVMOLR(_n)	(0x0C038 + (0x40 * (_n))) /* DMA VM offload */
+#define IGC_VTCTRL(_n)	(0x10000 + (0x100 * (_n))) /* VT Control */
+#define IGC_TSYNCRXCTL	0x0B620 /* Rx Time Sync Control register - RW */
+#define IGC_TSYNCTXCTL	0x0B614 /* Tx Time Sync Control register - RW */
+#define IGC_TSYNCRXCFG	0x05F50 /* Time Sync Rx Configuration - RW */
+#define IGC_RXSTMPL	0x0B624 /* Rx timestamp Low - RO */
+#define IGC_RXSTMPH	0x0B628 /* Rx timestamp High - RO */
+#define IGC_RXSATRL	0x0B62C /* Rx timestamp attribute low - RO */
+#define IGC_RXSATRH	0x0B630 /* Rx timestamp attribute high - RO */
+#define IGC_TXSTMPL	0x0B618 /* Tx timestamp value Low - RO */
+#define IGC_TXSTMPH	0x0B61C /* Tx timestamp value High - RO */
+#define IGC_SYSTIML	0x0B600 /* System time register Low - RO */
+#define IGC_SYSTIMH	0x0B604 /* System time register High - RO */
+#define IGC_TIMINCA	0x0B608 /* Increment attributes register - RW */
+#define IGC_TIMADJL	0x0B60C /* Time sync time adjustment offset Low - RW */
+#define IGC_TIMADJH	0x0B610 /* Time sync time adjustment offset High - RW */
+#define IGC_TSAUXC	0x0B640 /* Timesync Auxiliary Control register */
+#define	IGC_SYSSTMPL	0x0B648 /* HH Timesync system stamp low register */
+#define	IGC_SYSSTMPH	0x0B64C /* HH Timesync system stamp hi register */
+#define	IGC_PLTSTMPL	0x0B640 /* HH Timesync platform stamp low register */
+#define	IGC_PLTSTMPH	0x0B644 /* HH Timesync platform stamp hi register */
+#define IGC_SYSTIMR	0x0B6F8 /* System time register Residue */
+#define IGC_TSICR	0x0B66C /* Interrupt Cause Register */
+#define IGC_TSIM	0x0B674 /* Interrupt Mask Register */
+#define IGC_RXMTRL	0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
+#define IGC_RXUDP	0x0B638 /* Time Sync Rx UDP Port - RW */
+
+/* Filtering Registers */
+#define IGC_SAQF(_n)	(0x05980 + (4 * (_n))) /* Source Address Queue Fltr */
+#define IGC_DAQF(_n)	(0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */
+#define IGC_SPQF(_n)	(0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */
+#define IGC_FTQF(_n)	(0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */
+#define IGC_TTQF(_n)	(0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */
+#define IGC_SYNQF(_n)	(0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
+#define IGC_ETQF(_n)	(0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+
+#define IGC_RTTDCS	0x3600 /* Reedtown Tx Desc plane control and status */
+#define IGC_RTTPCS	0x3474 /* Reedtown Tx Packet Plane control and status */
+#define IGC_RTRPCS	0x2474 /* Rx packet plane control and status */
+#define IGC_RTRUP2TC	0x05AC4 /* Rx User Priority to Traffic Class */
+#define IGC_RTTUP2TC	0x0418 /* Transmit User Priority to Traffic Class */
+/* Tx Desc plane TC Rate-scheduler config */
+#define IGC_RTTDTCRC(_n)	(0x3610 + ((_n) * 4))
+/* Tx Packet plane TC Rate-Scheduler Config */
+#define IGC_RTTPTCRC(_n)	(0x3480 + ((_n) * 4))
+/* Rx Packet plane TC Rate-Scheduler Config */
+#define IGC_RTRPTCRC(_n)	(0x2480 + ((_n) * 4))
+/* Tx Desc Plane TC Rate-Scheduler Status */
+#define IGC_RTTDTCRS(_n)	(0x3630 + ((_n) * 4))
+/* Tx Desc Plane TC Rate-Scheduler MMW */
+#define IGC_RTTDTCRM(_n)	(0x3650 + ((_n) * 4))
+/* Tx Packet plane TC Rate-Scheduler Status */
+#define IGC_RTTPTCRS(_n)	(0x34A0 + ((_n) * 4))
+/* Tx Packet plane TC Rate-scheduler MMW */
+#define IGC_RTTPTCRM(_n)	(0x34C0 + ((_n) * 4))
+/* Rx Packet plane TC Rate-Scheduler Status */
+#define IGC_RTRPTCRS(_n)	(0x24A0 + ((_n) * 4))
+/* Rx Packet plane TC Rate-Scheduler MMW */
+#define IGC_RTRPTCRM(_n)	(0x24C0 + ((_n) * 4))
+/* Tx Desc plane VM Rate-Scheduler MMW*/
+#define IGC_RTTDVMRM(_n)	(0x3670 + ((_n) * 4))
+/* Tx BCN Rate-Scheduler MMW */
+#define IGC_RTTBCNRM(_n)	(0x3690 + ((_n) * 4))
+#define IGC_RTTDQSEL	0x3604  /* Tx Desc Plane Queue Select */
+#define IGC_RTTDVMRC	0x3608  /* Tx Desc Plane VM Rate-Scheduler Config */
+#define IGC_RTTDVMRS	0x360C  /* Tx Desc Plane VM Rate-Scheduler Status */
+#define IGC_RTTBCNRC	0x36B0  /* Tx BCN Rate-Scheduler Config */
+#define IGC_RTTBCNRS	0x36B4  /* Tx BCN Rate-Scheduler Status */
+#define IGC_RTTBCNCR	0xB200  /* Tx BCN Control Register */
+#define IGC_RTTBCNTG	0x35A4  /* Tx BCN Tagging */
+#define IGC_RTTBCNCP	0xB208  /* Tx BCN Congestion point */
+#define IGC_RTRBCNCR	0xB20C  /* Rx BCN Control Register */
+#define IGC_RTTBCNRD	0x36B8  /* Tx BCN Rate Drift */
+#define IGC_PFCTOP	0x1080  /* Priority Flow Control Type and Opcode */
+#define IGC_RTTBCNIDX	0xB204  /* Tx BCN Congestion Point */
+#define IGC_RTTBCNACH	0x0B214 /* Tx BCN Control High */
+#define IGC_RTTBCNACL	0x0B210 /* Tx BCN Control Low */
+
+/* DMA Coalescing registers */
+#define IGC_DMACR	0x02508 /* Control Register */
+#define IGC_DMCTXTH	0x03550 /* Transmit Threshold */
+#define IGC_DMCTLX	0x02514 /* Time to Lx Request */
+#define IGC_DMCRTRH	0x05DD0 /* Receive Packet Rate Threshold */
+#define IGC_DMCCNT	0x05DD4 /* Current Rx Count */
+#define IGC_FCRTC	0x02170 /* Flow Control Rx high watermark */
+#define IGC_PCIEMISC	0x05BB8 /* PCIE misc config register */
+
+/* PCIe Parity Status Register */
+#define IGC_PCIEERRSTS	0x05BA8
+
+#define IGC_PROXYS	0x5F64 /* Proxying Status */
+#define IGC_PROXYFC	0x5F60 /* Proxying Filter Control */
+/* Thermal sensor configuration and status registers */
+#define IGC_THMJT	0x08100 /* Junction Temperature */
+#define IGC_THLOWTC	0x08104 /* Low Threshold Control */
+#define IGC_THMIDTC	0x08108 /* Mid Threshold Control */
+#define IGC_THHIGHTC	0x0810C /* High Threshold Control */
+#define IGC_THSTAT	0x08110 /* Thermal Sensor Status */
+
+/* Energy Efficient Ethernet "EEE" registers */
+#define IGC_IPCNFG	0x0E38 /* Internal PHY Configuration */
+#define IGC_LTRC	0x01A0 /* Latency Tolerance Reporting Control */
+#define IGC_EEER	0x0E30 /* Energy Efficient Ethernet "EEE"*/
+#define IGC_EEE_SU	0x0E34 /* EEE Setup */
+#define IGC_EEE_SU_2P5	0x0E3C /* EEE 2.5G Setup */
+#define IGC_TLPIC	0x4148 /* EEE Tx LPI Count - TLPIC */
+#define IGC_RLPIC	0x414C /* EEE Rx LPI Count - RLPIC */
+
+/* OS2BMC Registers */
+#define IGC_B2OSPC	0x08FE0 /* BMC2OS packets sent by BMC */
+#define IGC_B2OGPRC	0x04158 /* BMC2OS packets received by host */
+#define IGC_O2BGPTC	0x08FE4 /* OS2BMC packets received by BMC */
+#define IGC_O2BSPC	0x0415C /* OS2BMC packets transmitted by host */
+
+#define IGC_LTRMINV	0x5BB0 /* LTR Minimum Value */
+#define IGC_LTRMAXV	0x5BB4 /* LTR Maximum Value */
+
+
+/* IEEE 1588 TIMESYNCH */
+#define IGC_TRGTTIML0	0x0B644 /* Target Time Register 0 Low  - RW */
+#define IGC_TRGTTIMH0	0x0B648 /* Target Time Register 0 High - RW */
+#define IGC_TRGTTIML1	0x0B64C /* Target Time Register 1 Low  - RW */
+#define IGC_TRGTTIMH1	0x0B650 /* Target Time Register 1 High - RW */
+#define IGC_FREQOUT0	0x0B654 /* Frequency Out 0 Control Register - RW */
+#define IGC_FREQOUT1	0x0B658 /* Frequency Out 1 Control Register - RW */
+#define IGC_TSSDP	0x0003C  /* Time Sync SDP Configuration Register - RW */
+
+#define IGC_LTRC_EEEMS_EN			(1 << 5)
+#define IGC_TW_SYSTEM_100_MASK		0xff00
+#define IGC_TW_SYSTEM_100_SHIFT	8
+#define IGC_TW_SYSTEM_1000_MASK	0xff
+#define IGC_LTRMINV_SCALE_1024		0x02
+#define IGC_LTRMINV_SCALE_32768	0x03
+#define IGC_LTRMAXV_SCALE_1024		0x02
+#define IGC_LTRMAXV_SCALE_32768	0x03
+#define IGC_LTRMINV_LTRV_MASK		0x1ff
+#define IGC_LTRMINV_LSNP_REQ		0x80
+#define IGC_LTRMINV_SCALE_SHIFT	10
+#define IGC_LTRMAXV_LTRV_MASK		0x1ff
+#define IGC_LTRMAXV_LSNP_REQ		0x80
+#define IGC_LTRMAXV_SCALE_SHIFT	10
+
+#define IGC_MRQC_ENABLE_MASK		0x00000007
+#define IGC_MRQC_RSS_FIELD_IPV6_EX	0x00080000
+#define IGC_RCTL_DTYP_MASK		0x00000C00 /* Descriptor type mask */
+
+#endif
diff --git a/drivers/net/igc/base/meson.build b/drivers/net/igc/base/meson.build
new file mode 100644
index 0000000..2999851
--- /dev/null
+++ b/drivers/net/igc/base/meson.build
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2019-2020 Intel Corporation
+
+sources = [
+	'igc_api.c',
+	'igc_base.c',
+	'igc_i225.c',
+	'igc_mac.c',
+	'igc_manage.c',
+	'igc_nvm.c',
+	'igc_osdep.c',
+	'igc_phy.c',
+]
+
+base_lib = static_library('igc_base', sources,
+	dependencies: static_rte_eal)
+
+base_objs = base_lib.extract_all_objects()
diff --git a/drivers/net/igc/igc_ethdev.c b/drivers/net/igc/igc_ethdev.c
index 29cf6eb..3a004a4 100644
--- a/drivers/net/igc/igc_ethdev.c
+++ b/drivers/net/igc/igc_ethdev.c
@@ -14,11 +14,8 @@
 #include "igc_ethdev.h"
 
 #define IGC_INTEL_VENDOR_ID		0x8086
-#define IGC_DEV_ID_I225_LM		0x15F2
-#define IGC_DEV_ID_I225_V		0x15F3
-#define IGC_DEV_ID_I225_K		0x3100
-#define IGC_DEV_ID_I225_I		0x15F8
-#define IGC_DEV_ID_I220_V		0x15F7
+
+#define IGC_FC_PAUSE_TIME		0x0680
 
 static const struct rte_pci_id pci_id_igc_map[] = {
 	{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_LM) },
@@ -86,6 +83,90 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
 	RTE_SET_USED(dev);
 }
 
+/*
+ *  Get hardware rx-buffer size.
+ */
+static inline int
+igc_get_rx_buffer_size(struct igc_hw *hw)
+{
+	return (IGC_READ_REG(hw, IGC_RXPBS) & 0x3f) << 10;
+}
+
+/*
+ * igc_hw_control_acquire sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means
+ * that the driver is loaded.
+ */
+static void
+igc_hw_control_acquire(struct igc_hw *hw)
+{
+	uint32_t ctrl_ext;
+
+	/* Let firmware know the driver has taken over */
+	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
+	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext | IGC_CTRL_EXT_DRV_LOAD);
+}
+
+/*
+ * igc_hw_control_release resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ */
+static void
+igc_hw_control_release(struct igc_hw *hw)
+{
+	uint32_t ctrl_ext;
+
+	/* Let firmware taken over control of h/w */
+	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
+	IGC_WRITE_REG(hw, IGC_CTRL_EXT,
+			ctrl_ext & ~IGC_CTRL_EXT_DRV_LOAD);
+}
+
+static int
+igc_hardware_init(struct igc_hw *hw)
+{
+	uint32_t rx_buf_size;
+	int diag;
+
+	/* Let the firmware know the OS is in control */
+	igc_hw_control_acquire(hw);
+
+	/* Issue a global reset */
+	igc_reset_hw(hw);
+
+	/* disable all wake up */
+	IGC_WRITE_REG(hw, IGC_WUC, 0);
+
+	/*
+	 * Hardware flow control
+	 * - High water mark should allow for at least two standard size (1518)
+	 *   frames to be received after sending an XOFF.
+	 * - Low water mark works best when it is very near the high water mark.
+	 *   This allows the receiver to restart by sending XON when it has
+	 *   drained a bit. Here we use an arbitrary value of 1500 which will
+	 *   restart after one full frame is pulled from the buffer. There
+	 *   could be several smaller frames in the buffer and if so they will
+	 *   not trigger the XON until their total number reduces the buffer
+	 *   by 1500.
+	 */
+	rx_buf_size = igc_get_rx_buffer_size(hw);
+	hw->fc.high_water = rx_buf_size - (RTE_ETHER_MAX_LEN * 2);
+	hw->fc.low_water = hw->fc.high_water - 1500;
+	hw->fc.pause_time = IGC_FC_PAUSE_TIME;
+	hw->fc.send_xon = 1;
+	hw->fc.requested_mode = igc_fc_full;
+
+	diag = igc_init_hw(hw);
+	if (diag < 0)
+		return diag;
+
+	igc_get_phy_info(hw);
+	igc_check_for_link(hw);
+
+	return 0;
+}
+
 static int
 eth_igc_start(struct rte_eth_dev *dev)
 {
@@ -94,17 +175,91 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
 	return 0;
 }
 
+static int
+igc_reset_swfw_lock(struct igc_hw *hw)
+{
+	int ret_val;
+
+	/*
+	 * Do mac ops initialization manually here, since we will need
+	 * some function pointers set by this call.
+	 */
+	ret_val = igc_init_mac_params(hw);
+	if (ret_val)
+		return ret_val;
+
+	/*
+	 * SMBI lock should not fail in this early stage. If this is the case,
+	 * it is due to an improper exit of the application.
+	 * So force the release of the faulty lock.
+	 */
+	if (igc_get_hw_semaphore_generic(hw) < 0)
+		PMD_DRV_LOG(DEBUG, "SMBI lock released");
+
+	igc_put_hw_semaphore_generic(hw);
+
+	if (hw->mac.ops.acquire_swfw_sync != NULL) {
+		uint16_t mask;
+
+		/*
+		 * Phy lock should not fail in this early stage.
+		 * If this is the case, it is due to an improper exit of the
+		 * application. So force the release of the faulty lock.
+		 */
+		mask = IGC_SWFW_PHY0_SM;
+		if (hw->mac.ops.acquire_swfw_sync(hw, mask) < 0) {
+			PMD_DRV_LOG(DEBUG, "SWFW phy%d lock released",
+				    hw->bus.func);
+		}
+		hw->mac.ops.release_swfw_sync(hw, mask);
+
+		/*
+		 * This one is more tricky since it is common to all ports; but
+		 * swfw_sync retries last long enough (1s) to be almost sure
+		 * that if lock can not be taken it is due to an improper lock
+		 * of the semaphore.
+		 */
+		mask = IGC_SWFW_EEP_SM;
+		if (hw->mac.ops.acquire_swfw_sync(hw, mask) < 0)
+			PMD_DRV_LOG(DEBUG, "SWFW common locks released");
+
+		hw->mac.ops.release_swfw_sync(hw, mask);
+	}
+
+	return IGC_SUCCESS;
+}
+
 static void
 eth_igc_close(struct rte_eth_dev *dev)
 {
+	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
 	PMD_INIT_FUNC_TRACE();
-	 RTE_SET_USED(dev);
+
+	igc_phy_hw_reset(hw);
+	igc_hw_control_release(hw);
+
+	/* Reset any pending lock */
+	igc_reset_swfw_lock(hw);
+}
+
+static void
+igc_identify_hardware(struct rte_eth_dev *dev, struct rte_pci_device *pci_dev)
+{
+	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+
+	hw->vendor_id = pci_dev->id.vendor_id;
+	hw->device_id = pci_dev->id.device_id;
+	hw->subsystem_vendor_id = pci_dev->id.subsystem_vendor_id;
+	hw->subsystem_device_id = pci_dev->id.subsystem_device_id;
 }
 
 static int
 eth_igc_dev_init(struct rte_eth_dev *dev)
 {
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+	int error = 0;
 
 	PMD_INIT_FUNC_TRACE();
 	dev->dev_ops = &eth_igc_ops;
@@ -117,12 +272,91 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
 
+	rte_eth_copy_pci_info(dev, pci_dev);
+
+	hw->back = pci_dev;
+	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
+
+	igc_identify_hardware(dev, pci_dev);
+	if (igc_setup_init_funcs(hw, false) != IGC_SUCCESS) {
+		error = -EIO;
+		goto err_late;
+	}
+
+	igc_get_bus_info(hw);
+
+	/* Reset any pending lock */
+	if (igc_reset_swfw_lock(hw) != IGC_SUCCESS) {
+		error = -EIO;
+		goto err_late;
+	}
+
+	/* Finish initialization */
+	if (igc_setup_init_funcs(hw, true) != IGC_SUCCESS) {
+		error = -EIO;
+		goto err_late;
+	}
+
+	hw->mac.autoneg = 1;
+	hw->phy.autoneg_wait_to_complete = 0;
+	hw->phy.autoneg_advertised = IGC_ALL_SPEED_DUPLEX_2500;
+
+	/* Copper options */
+	if (hw->phy.media_type == igc_media_type_copper) {
+		hw->phy.mdix = 0; /* AUTO_ALL_MODES */
+		hw->phy.disable_polarity_correction = 0;
+		hw->phy.ms_type = igc_ms_hw_default;
+	}
+
+	/*
+	 * Start from a known state, this is important in reading the nvm
+	 * and mac from that.
+	 */
+	igc_reset_hw(hw);
+
+	/* Make sure we have a good EEPROM before we read from it */
+	if (igc_validate_nvm_checksum(hw) < 0) {
+		/*
+		 * Some PCI-E parts fail the first check due to
+		 * the link being in sleep state, call it again,
+		 * if it fails a second time its a real issue.
+		 */
+		if (igc_validate_nvm_checksum(hw) < 0) {
+			PMD_INIT_LOG(ERR, "EEPROM checksum invalid");
+			error = -EIO;
+			goto err_late;
+		}
+	}
+
+	/* Read the permanent MAC address out of the EEPROM */
+	if (igc_read_mac_addr(hw) != 0) {
+		PMD_INIT_LOG(ERR, "EEPROM error while reading MAC address");
+		error = -EIO;
+		goto err_late;
+	}
+
+	/* Allocate memory for storing MAC addresses */
 	dev->data->mac_addrs = rte_zmalloc("igc",
-		RTE_ETHER_ADDR_LEN, 0);
+		RTE_ETHER_ADDR_LEN * hw->mac.rar_entry_count, 0);
 	if (dev->data->mac_addrs == NULL) {
 		PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
-				"store MAC addresses", RTE_ETHER_ADDR_LEN);
-		return -ENOMEM;
+				"store MAC addresses",
+				RTE_ETHER_ADDR_LEN * hw->mac.rar_entry_count);
+		error = -ENOMEM;
+		goto err_late;
+	}
+
+	/* Copy the permanent MAC address */
+	rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.addr,
+			&dev->data->mac_addrs[0]);
+
+	/* Now initialize the hardware */
+	if (igc_hardware_init(hw) != 0) {
+		PMD_INIT_LOG(ERR, "Hardware initialization failed");
+		rte_free(dev->data->mac_addrs);
+		dev->data->mac_addrs = NULL;
+		error = -ENODEV;
+		goto err_late;
 	}
 
 	/* Pass the information to the rte_eth_dev_close() that it should also
@@ -130,11 +364,22 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
 	 */
 	dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
 
+	hw->mac.get_link_status = 1;
+
+	/* Indicate SOL/IDER usage */
+	if (igc_check_reset_block(hw) < 0)
+		PMD_INIT_LOG(ERR, "PHY reset is blocked due to"
+				" SOL/IDER session.");
+
 	PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
 			dev->data->port_id, pci_dev->id.vendor_id,
 			pci_dev->id.device_id);
 
 	return 0;
+
+err_late:
+	igc_hw_control_release(hw);
+	return error;
 }
 
 static int
@@ -224,7 +469,8 @@ static int eth_igc_infos_get(struct rte_eth_dev *dev,
 	struct rte_pci_device *pci_dev)
 {
 	PMD_INIT_FUNC_TRACE();
-	return rte_eth_dev_pci_generic_probe(pci_dev, 0, eth_igc_dev_init);
+	return rte_eth_dev_pci_generic_probe(pci_dev,
+		sizeof(struct igc_adapter), eth_igc_dev_init);
 }
 
 static int
diff --git a/drivers/net/igc/igc_ethdev.h b/drivers/net/igc/igc_ethdev.h
index d696b6e..4cff0e3 100644
--- a/drivers/net/igc/igc_ethdev.h
+++ b/drivers/net/igc/igc_ethdev.h
@@ -5,12 +5,31 @@
 #ifndef _IGC_ETHDEV_H_
 #define _IGC_ETHDEV_H_
 
+#include <rte_ethdev.h>
+
+#include "base/igc_osdep.h"
+#include "base/igc_hw.h"
+#include "base/igc_i225.h"
+#include "base/igc_api.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 #define IGC_QUEUE_PAIRS_NUM		4
 
+/*
+ * Structure to store private data for each driver instance (for each port).
+ */
+struct igc_adapter {
+	struct igc_hw		hw;
+};
+
+#define IGC_DEV_PRIVATE(_dev)	((_dev)->data->dev_private)
+
+#define IGC_DEV_PRIVATE_HW(_dev) \
+	(&((struct igc_adapter *)(_dev)->data->dev_private)->hw)
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/drivers/net/igc/meson.build b/drivers/net/igc/meson.build
index 22dd1cf..aa211d6 100644
--- a/drivers/net/igc/meson.build
+++ b/drivers/net/igc/meson.build
@@ -1,7 +1,12 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2019-2020 Intel Corporation
 
+subdir('base')
+objs = [base_objs]
+
 sources = files(
 	'igc_logs.c',
 	'igc_ethdev.c'
 )
+
+includes += include_directories('base')
-- 
1.8.3.1



More information about the dev mailing list