[dpdk-dev] [PATCH v2 10/13] baseband/fpga_5gnr_fec: add configure function

Power, Niall niall.power at intel.com
Wed Apr 15 17:40:35 CEST 2020


Reviewed-by: Niall Power <niall.power at intel.com>

> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Chautru, Nicolas
> Sent: Monday, March 30, 2020 1:03 AM
> To: dev at dpdk.org; akhil.goyal at nxp.com
> Cc: Richardson, Bruce <bruce.richardson at intel.com>; Chautru, Nicolas
> <nicolas.chautru at intel.com>
> Subject: [dpdk-dev] [PATCH v2 10/13] baseband/fpga_5gnr_fec: add configure
> function
> 
> Add configure function to configure the PF from within the bbdev-test itself
> without external application configuration the device.
> 
> Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> ---
>  app/test-bbdev/test_bbdev_perf.c                   |  57 ++++++
>  doc/guides/bbdevs/fpga_5gnr_fec.rst                | 123 +++++++++++++
>  drivers/baseband/fpga_5gnr_fec/Makefile            |   3 +
>  drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h     |  74 ++++++++
>  drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 196
> +++++++++++++++++++++
>  .../rte_pmd_bbdev_fpga_5gnr_fec_version.map        |   7 +
>  6 files changed, 460 insertions(+)
>  create mode 100644 drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> 
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-
> bbdev/test_bbdev_perf.c
> index d8db58e..19ad65c 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -42,6 +42,19 @@
>  #define FLR_TIMEOUT 610
>  #endif
> 
> +#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
> +#include <fpga_5gnr_fec.h>
> +#define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf") #define
> +FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf") #define
> +VF_UL_5G_QUEUE_VALUE 4 #define VF_DL_5G_QUEUE_VALUE 4 #define
> +UL_5G_BANDWIDTH 3 #define DL_5G_BANDWIDTH 3 #define
> UL_5G_LOAD_BALANCE
> +128 #define DL_5G_LOAD_BALANCE 128 #define FLR_5G_TIMEOUT 610
> #endif
> +
>  #define OPS_CACHE_SIZE 256U
>  #define OPS_POOL_SIZE_MIN 511U /* 0.5K per queue */
> 
> @@ -563,6 +576,50 @@ typedef int (test_case_function)(struct active_device
> *ad,
>  				info->dev_name);
>  	}
>  #endif
> +#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
> +	if ((get_init_device() == true) &&
> +		(!strcmp(info->drv.driver_name,
> FPGA_5GNR_PF_DRIVER_NAME))) {
> +		struct fpga_5gnr_fec_conf conf;
> +		unsigned int i;
> +
> +		printf("Configure FPGA 5GNR FEC Driver %s with default
> values\n",
> +				info->drv.driver_name);
> +
> +		/* clear default configuration before initialization */
> +		memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
> +
> +		/* Set PF mode :
> +		 * true if PF is used for data plane
> +		 * false for VFs
> +		 */
> +		conf.pf_mode_en = true;
> +
> +		for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
> +			/* Number of UL queues per VF (fpga supports 8 VFs) */
> +			conf.vf_ul_queues_number[i] =
> VF_UL_5G_QUEUE_VALUE;
> +			/* Number of DL queues per VF (fpga supports 8 VFs) */
> +			conf.vf_dl_queues_number[i] =
> VF_DL_5G_QUEUE_VALUE;
> +		}
> +
> +		/* UL bandwidth. Needed for schedule algorithm */
> +		conf.ul_bandwidth = UL_5G_BANDWIDTH;
> +		/* DL bandwidth */
> +		conf.dl_bandwidth = DL_5G_BANDWIDTH;
> +
> +		/* UL & DL load Balance Factor to 64 */
> +		conf.ul_load_balance = UL_5G_LOAD_BALANCE;
> +		conf.dl_load_balance = DL_5G_LOAD_BALANCE;
> +
> +		/**< FLR timeout value */
> +		conf.flr_time_out = FLR_5G_TIMEOUT;
> +
> +		/* setup FPGA PF with configuration information */
> +		ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
> +		TEST_ASSERT_SUCCESS(ret,
> +				"Failed to configure 5G FPGA PF for bbdev %s",
> +				info->dev_name);
> +	}
> +#endif
>  	nb_queues = RTE_MIN(rte_lcore_count(), info->drv.max_num_queues);
>  	nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
> 
> diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst
> b/doc/guides/bbdevs/fpga_5gnr_fec.rst
> index 7eab7a4..5641b1a 100644
> --- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
> +++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
> @@ -166,6 +166,129 @@ name is different:
>    echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
> 
> 
> +Configure the VFs through PF
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The PCI virtual functions must be configured before working or getting
> +assigned to VMs/Containers. The configuration involves allocating the
> +number of hardware queues, priorities, load balance, bandwidth and
> +other settings necessary for the device to perform FEC functions.
> +
> +This configuration needs to be executed at least once after reboot or
> +PCI FLR and can be achieved by using the function
> +``fpga_5gnr_fec_configure()``, which sets up the parameters defined in
> ``fpga_5gnr_fec_conf`` structure:
> +
> +.. code-block:: c
> +
> +  struct fpga_5gnr_fec_conf {
> +      bool pf_mode_en;
> +      uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> +      uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> +      uint8_t ul_bandwidth;
> +      uint8_t dl_bandwidth;
> +      uint8_t ul_load_balance;
> +      uint8_t dl_load_balance;
> +      uint16_t flr_time_out;
> +  };
> +
> +- ``pf_mode_en``: identifies whether only PF is to be used, or the VFs.
> +PF and
> +  VFs are mutually exclusive and cannot run simultaneously.
> +  Set to 1 for PF mode enabled.
> +  If PF mode is enabled all queues available in the device are assigned
> +  exclusively to PF and 0 queues given to VFs.
> +
> +- ``vf_*l_queues_number``: defines the hardware queue mapping for every
> VF.
> +
> +- ``*l_bandwidth``: in case of congestion on PCIe interface. The device
> +  allocates different bandwidth to UL and DL. The weight is configured
> +by this
> +  setting. The unit of weight is 3 code blocks. For example, if the
> +code block
> +  cbps (code block per second) ratio between UL and DL is 12:1, then
> +the
> +  configuration value should be set to 36:3. The schedule algorithm is
> +based
> +  on code block regardless the length of each block.
> +
> +- ``*l_load_balance``: hardware queues are load-balanced in a
> +round-robin
> +  fashion. Queues get filled first-in first-out until they reach a
> +pre-defined
> +  watermark level, if exceeded, they won't get assigned new code blocks..
> +  This watermark is defined by this setting.
> +
> +  If all hardware queues exceeds the watermark, no code blocks will be
> + streamed in from UL/DL code block FIFO.
> +
> +- ``flr_time_out``: specifies how many 16.384us to be FLR time out. The
> +  time_out = flr_time_out x 16.384us. For instance, if you want to set
> +10ms for
> +  the FLR time out then set this setting to 0x262=610.
> +
> +
> +An example configuration code calling the function
> +``fpga_5gnr_fec_configure()`` is shown
> +below:
> +
> +.. code-block:: c
> +
> +  struct fpga_5gnr_fec_conf conf;
> +  unsigned int i;
> +
> +  memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));  conf.pf_mode_en
> + = 1;
> +
> +  for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
> +      conf.vf_ul_queues_number[i] = 4;
> +      conf.vf_dl_queues_number[i] = 4;
> +  }
> +  conf.ul_bandwidth = 12;
> +  conf.dl_bandwidth = 5;
> +  conf.dl_load_balance = 64;
> +  conf.ul_load_balance = 64;
> +
> +  /* setup FPGA PF */
> +  ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
> + TEST_ASSERT_SUCCESS(ret,
> +      "Failed to configure 4G FPGA PF for bbdev %s",
> +      info->dev_name);
> +
> +
> +Test Application
> +----------------
> +
> +BBDEV provides a test application, ``test-bbdev.py`` and range of test
> +data for testing the functionality of FPGA 5GNR FEC encode and decode,
> +depending on the device's capabilities. The test application is located
> +under app->test-bbdev folder and has the following options:
> +
> +.. code-block:: console
> +
> +  "-p", "--testapp-path": specifies path to the bbdev test app.
> +  "-e", "--eal-params"	: EAL arguments which are passed to the test app.
> +  "-t", "--timeout"	: Timeout in seconds (default=300).
> +  "-c", "--test-cases"	: Defines test cases to run. Run all if not specified.
> +  "-v", "--test-vector"	: Test vector path (default=dpdk_path+/app/test-
> bbdev/test_vectors/bbdev_null.data).
> +  "-n", "--num-ops"	: Number of operations to process on device
> (default=32).
> +  "-b", "--burst-size"	: Operations enqueue/dequeue burst size (default=32).
> +  "-l", "--num-lcores"	: Number of lcores to run (default=16).
> +  "-i", "--init-device" : Initialise PF device with default values.
> +
> +
> +To execute the test application tool using simple decode or encode
> +data, type one of the following:
> +
> +.. code-block:: console
> +
> +  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
> + ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
> +
> +
> +The test application ``test-bbdev.py``, supports the ability to
> +configure the PF device with a default set of values, if the "-i" or "-
> +-init-device" option is included. The default values are defined in
> test_bbdev_perf.c as:
> +
> +- VF_UL_QUEUE_VALUE 4
> +- VF_DL_QUEUE_VALUE 4
> +- UL_BANDWIDTH 3
> +- DL_BANDWIDTH 3
> +- UL_LOAD_BALANCE 128
> +- DL_LOAD_BALANCE 128
> +- FLR_TIMEOUT 610
> +
> +
>  Test Vectors
>  ~~~~~~~~~~~~
> 
> diff --git a/drivers/baseband/fpga_5gnr_fec/Makefile
> b/drivers/baseband/fpga_5gnr_fec/Makefile
> index 3f5c511..b68a79f 100644
> --- a/drivers/baseband/fpga_5gnr_fec/Makefile
> +++ b/drivers/baseband/fpga_5gnr_fec/Makefile
> @@ -23,4 +23,7 @@ LIBABIVER := 1
>  # library source files
>  SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) +=
> rte_fpga_5gnr_fec.c
> 
> +# export include files
> +SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC)-include +=
> +fpga_5gnr_fec.h
> +
>  include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> new file mode 100644
> index 0000000..7eebc7d
> --- /dev/null
> +++ b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2020 Intel Corporation
> + */
> +
> +#ifndef _FPGA_5GNR_FEC_H_
> +#define _FPGA_5GNR_FEC_H_
> +
> +#include <stdint.h>
> +#include <stdbool.h>
> +
> +/**
> + * @file fpga_5gnr_fec.h
> + *
> + * Interface for Intel(R) FGPA 5GNR FEC device configuration at the
> +host level,
> + * directly accessible by the application.
> + * Configuration related to 5GNR functionality is done through
> + * librte_bbdev library.
> + *
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice  */
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +/**< Number of Virtual Functions FGPA 4G FEC supports */ #define
> +FPGA_5GNR_FEC_NUM_VFS 8
> +
> +/**
> + * Structure to pass FPGA 4G FEC configuration.
> + */
> +struct fpga_5gnr_fec_conf {
> +	/**< 1 if PF is used for dataplane, 0 for VFs */
> +	bool pf_mode_en;
> +	/**< Number of UL queues per VF */
> +	uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> +	/**< Number of DL queues per VF */
> +	uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> +	/**< UL bandwidth. Needed for schedule algorithm */
> +	uint8_t ul_bandwidth;
> +	/**< DL bandwidth. Needed for schedule algorithm */
> +	uint8_t dl_bandwidth;
> +	/**< UL Load Balance */
> +	uint8_t ul_load_balance;
> +	/**< DL Load Balance */
> +	uint8_t dl_load_balance;
> +	/**< FLR timeout value */
> +	uint16_t flr_time_out;
> +};
> +
> +/**
> + * Configure Intel(R) FPGA 5GNR FEC device
> + *
> + * @param dev_name
> + *   The name of the device. This is the short form of PCI BDF, e.g. 00:01.0.
> + *   It can also be retrieved for a bbdev device from the dev_name field in the
> + *   rte_bbdev_info structure returned by rte_bbdev_info_get().
> + * @param conf
> + *   Configuration to apply to FPGA 4G FEC.
> + *
> + * @return
> + *   Zero on success, negative value on failure.
> + */
> +__rte_experimental
> +int
> +fpga_5gnr_fec_configure(const char *dev_name,
> +		const struct fpga_5gnr_fec_conf *conf);
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _FPGA_5GNR_FEC_H_ */
> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> index 389257d..2559da5 100644
> --- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> +++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> @@ -21,6 +21,7 @@
>  #include <rte_bbdev_pmd.h>
> 
>  #include "rte_fpga_5gnr_fec.h"
> +#include "fpga_5gnr_fec.h"
> 
>  /* 5GNR SW PMD logging ID */
>  static int fpga_5gnr_fec_logtype;
> @@ -1722,6 +1723,201 @@
>  	return 0;
>  }
> 
> +static inline void
> +set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf) {
> +	/* clear default configuration before initialization */
> +	memset(def_conf, 0, sizeof(struct fpga_5gnr_fec_conf));
> +	/* Set pf mode to true */
> +	def_conf->pf_mode_en = true;
> +
> +	/* Set ratio between UL and DL to 1:1 (unit of weight is 3 CBs) */
> +	def_conf->ul_bandwidth = 3;
> +	def_conf->dl_bandwidth = 3;
> +
> +	/* Set Load Balance Factor to 64 */
> +	def_conf->dl_load_balance = 64;
> +	def_conf->ul_load_balance = 64;
> +}
> +
> +/* Initial configuration of FPGA 5GNR FEC device */ int
> +fpga_5gnr_fec_configure(const char *dev_name,
> +		const struct fpga_5gnr_fec_conf *conf) {
> +	uint32_t payload_32, address;
> +	uint16_t payload_16;
> +	uint8_t payload_8;
> +	uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
> +	struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
> +	struct fpga_5gnr_fec_conf def_conf;
> +
> +	if (bbdev == NULL) {
> +		rte_bbdev_log(ERR,
> +				"Invalid dev_name (%s), or device is not yet
> initialised",
> +				dev_name);
> +		return -ENODEV;
> +	}
> +
> +	struct fpga_5gnr_fec_device *d = bbdev->data->dev_private;
> +
> +	if (conf == NULL) {
> +		rte_bbdev_log(ERR,
> +				"FPGA Configuration was not provided. Default
> configuration will be loaded.");
> +		set_default_fpga_conf(&def_conf);
> +		conf = &def_conf;
> +	}
> +
> +	/*
> +	 * Configure UL:DL ratio.
> +	 * [7:0]: UL weight
> +	 * [15:8]: DL weight
> +	 */
> +	payload_16 = (conf->dl_bandwidth << 8) | conf->ul_bandwidth;
> +	address = FPGA_5GNR_FEC_CONFIGURATION;
> +	fpga_reg_write_16(d->mmio_base, address, payload_16);
> +
> +	/* Clear all queues registers */
> +	payload_32 = FPGA_INVALID_HW_QUEUE_ID;
> +	for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
> +		address = (q_id << 2) + FPGA_5GNR_FEC_QUEUE_MAP;
> +		fpga_reg_write_32(d->mmio_base, address, payload_32);
> +	}
> +
> +	/*
> +	 * If PF mode is enabled allocate all queues for PF only.
> +	 *
> +	 * For VF mode each VF can have different number of UL and DL queues.
> +	 * Total number of queues to configure cannot exceed FPGA
> +	 * capabilities - 64 queues - 32 queues for UL and 32 queues for DL.
> +	 * Queues mapping is done according to configuration:
> +	 *
> +	 * UL queues:
> +	 * |                Q_ID              | VF_ID |
> +	 * |                 0                |   0   |
> +	 * |                ...               |   0   |
> +	 * | conf->vf_dl_queues_number[0] - 1 |   0   |
> +	 * | conf->vf_dl_queues_number[0]     |   1   |
> +	 * |                ...               |   1   |
> +	 * | conf->vf_dl_queues_number[1] - 1 |   1   |
> +	 * |                ...               |  ...  |
> +	 * | conf->vf_dl_queues_number[7] - 1 |   7   |
> +	 *
> +	 * DL queues:
> +	 * |                Q_ID              | VF_ID |
> +	 * |                 32               |   0   |
> +	 * |                ...               |   0   |
> +	 * | conf->vf_ul_queues_number[0] - 1 |   0   |
> +	 * | conf->vf_ul_queues_number[0]     |   1   |
> +	 * |                ...               |   1   |
> +	 * | conf->vf_ul_queues_number[1] - 1 |   1   |
> +	 * |                ...               |  ...  |
> +	 * | conf->vf_ul_queues_number[7] - 1 |   7   |
> +	 *
> +	 * Example of configuration:
> +	 * conf->vf_ul_queues_number[0] = 4;  -> 4 UL queues for VF0
> +	 * conf->vf_dl_queues_number[0] = 4;  -> 4 DL queues for VF0
> +	 * conf->vf_ul_queues_number[1] = 2;  -> 2 UL queues for VF1
> +	 * conf->vf_dl_queues_number[1] = 2;  -> 2 DL queues for VF1
> +	 *
> +	 * UL:
> +	 * | Q_ID | VF_ID |
> +	 * |   0  |   0   |
> +	 * |   1  |   0   |
> +	 * |   2  |   0   |
> +	 * |   3  |   0   |
> +	 * |   4  |   1   |
> +	 * |   5  |   1   |
> +	 *
> +	 * DL:
> +	 * | Q_ID | VF_ID |
> +	 * |  32  |   0   |
> +	 * |  33  |   0   |
> +	 * |  34  |   0   |
> +	 * |  35  |   0   |
> +	 * |  36  |   1   |
> +	 * |  37  |   1   |
> +	 */
> +	if (conf->pf_mode_en) {
> +		payload_32 = 0x1;
> +		for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
> +			address = (q_id << 2) + FPGA_5GNR_FEC_QUEUE_MAP;
> +			fpga_reg_write_32(d->mmio_base, address,
> payload_32);
> +		}
> +	} else {
> +		/* Calculate total number of UL and DL queues to configure */
> +		total_ul_q_id = total_dl_q_id = 0;
> +		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
> +			total_ul_q_id += conf->vf_ul_queues_number[vf_id];
> +			total_dl_q_id += conf->vf_dl_queues_number[vf_id];
> +		}
> +		total_q_id = total_dl_q_id + total_ul_q_id;
> +		/*
> +		 * Check if total number of queues to configure does not exceed
> +		 * FPGA capabilities (64 queues - 32 UL and 32 DL queues)
> +		 */
> +		if ((total_ul_q_id > FPGA_NUM_UL_QUEUES) ||
> +			(total_dl_q_id > FPGA_NUM_DL_QUEUES) ||
> +			(total_q_id > FPGA_TOTAL_NUM_QUEUES)) {
> +			rte_bbdev_log(ERR,
> +					"FPGA Configuration failed. Too many
> queues to configure: UL_Q %u, DL_Q %u, FPGA_Q %u",
> +					total_ul_q_id, total_dl_q_id,
> +					FPGA_TOTAL_NUM_QUEUES);
> +			return -EINVAL;
> +		}
> +		total_ul_q_id = 0;
> +		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
> +			for (q_id = 0; q_id < conf->vf_ul_queues_number[vf_id];
> +					++q_id, ++total_ul_q_id) {
> +				address = (total_ul_q_id << 2) +
> +
> 	FPGA_5GNR_FEC_QUEUE_MAP;
> +				payload_32 = ((0x80 + vf_id) << 16) | 0x1;
> +				fpga_reg_write_32(d->mmio_base, address,
> +						payload_32);
> +			}
> +		}
> +		total_dl_q_id = 0;
> +		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
> +			for (q_id = 0; q_id < conf->vf_dl_queues_number[vf_id];
> +					++q_id, ++total_dl_q_id) {
> +				address = ((total_dl_q_id +
> FPGA_NUM_UL_QUEUES)
> +						<< 2) +
> FPGA_5GNR_FEC_QUEUE_MAP;
> +				payload_32 = ((0x80 + vf_id) << 16) | 0x1;
> +				fpga_reg_write_32(d->mmio_base, address,
> +						payload_32);
> +			}
> +		}
> +	}
> +
> +	/* Setting Load Balance Factor */
> +	payload_16 = (conf->dl_load_balance << 8) | (conf->ul_load_balance);
> +	address = FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR;
> +	fpga_reg_write_16(d->mmio_base, address, payload_16);
> +
> +	/* Setting length of ring descriptor entry */
> +	payload_16 = FPGA_RING_DESC_ENTRY_LENGTH;
> +	address = FPGA_5GNR_FEC_RING_DESC_LEN;
> +	fpga_reg_write_16(d->mmio_base, address, payload_16);
> +
> +	/* Setting FLR timeout value */
> +	payload_16 = conf->flr_time_out;
> +	address = FPGA_5GNR_FEC_FLR_TIME_OUT;
> +	fpga_reg_write_16(d->mmio_base, address, payload_16);
> +
> +	/* Queue PF/VF mapping table is ready */
> +	payload_8 = 0x1;
> +	address = FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE;
> +	fpga_reg_write_8(d->mmio_base, address, payload_8);
> +
> +	rte_bbdev_log_debug("PF FPGA 5GNR FEC configuration complete for
> %s",
> +			dev_name);
> +
> +#ifdef RTE_LIBRTE_BBDEV_DEBUG
> +	print_static_reg_debug_info(d->mmio_base);
> +#endif
> +	return 0;
> +}
> +
>  /* FPGA 5GNR FEC PCI PF address map */
>  static struct rte_pci_id pci_id_fpga_5gnr_fec_pf_map[] = {
>  	{
> diff --git
> a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.ma
> p
> b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.ma
> p
> index f9f17e4..b0fb971 100644
> ---
> a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.ma
> p
> +++
> b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version
> +++ .map
> @@ -1,3 +1,10 @@
>  DPDK_20.0 {
>  	local: *;
>  };
> +
> +EXPERIMENTAL {
> +	global:
> +
> +	fpga_5gnr_fec_configure;
> +
> +};
> --
> 1.8.3.1



More information about the dev mailing list