[dpdk-dev] [PATCH v4 10/18] ethdev: add callback support for telemetry
Ciara Power
ciara.power at intel.com
Fri Apr 24 14:41:51 CEST 2020
From: Bruce Richardson <bruce.richardson at intel.com>
The ethdev library now registers commands with telemetry, and
implements the callback functions. These commands allow the list of
ethdev ports and the xstats and link status for a port to be queried.
An example using ethdev commands is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 64379, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info"]}
--> /ethdev/list
{"/ethdev/list": [0, 1, 2, 3]}
--> /ethdev/link_status,0
{"/ethdev/link_status": {"status": "UP", "speed": 10000, "duplex": \
"full-duplex"}}
--> /ethdev/xstats,0
{"/ethdev/xstats": {"rx_good_packets": 0, "tx_good_packets": 0, \
<snip>
"tx_priority7_xon_to_xoff_packets": 0}}
Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
Signed-off-by: Ciara Power <ciara.power at intel.com>
---
v4: Modified to use binary data formatting instead of JSON.
v2:
- Renamed stats to xstats for device specific stats.
- Added link status command for ethdev ports.
---
lib/librte_ethdev/Makefile | 4 ++
lib/librte_ethdev/meson.build | 4 ++
lib/librte_ethdev/rte_ethdev.c | 107 +++++++++++++++++++++++++++++++++
3 files changed, 115 insertions(+)
diff --git a/lib/librte_ethdev/Makefile b/lib/librte_ethdev/Makefile
index d50b7ddf10..38d3d35bfe 100644
--- a/lib/librte_ethdev/Makefile
+++ b/lib/librte_ethdev/Makefile
@@ -24,6 +24,10 @@ SRCS-y += rte_mtr.c
SRCS-y += ethdev_profile.c
SRCS-y += ethdev_trace_points.c
+ifeq ($(CONFIG_RTE_LIBRTE_TELEMETRY),y)
+LDLIBS += -lrte_telemetry
+endif
+
#
# Export include files
#
diff --git a/lib/librte_ethdev/meson.build b/lib/librte_ethdev/meson.build
index e5fd82e93c..6e0535ecfd 100644
--- a/lib/librte_ethdev/meson.build
+++ b/lib/librte_ethdev/meson.build
@@ -28,3 +28,7 @@ headers = files('rte_ethdev.h',
'rte_tm_driver.h')
deps += ['net', 'kvargs', 'meter']
+
+if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
+ deps += ['telemetry']
+endif
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 72aed59a54..4cfc6d1707 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -38,6 +38,9 @@
#include <rte_kvargs.h>
#include <rte_class.h>
#include <rte_ether.h>
+#ifdef RTE_LIBRTE_TELEMETRY
+#include <rte_telemetry.h>
+#endif
#include "rte_ethdev_trace.h"
#include "rte_ethdev.h"
@@ -5199,9 +5202,113 @@ rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs *eth_da)
return result;
}
+#ifdef RTE_LIBRTE_TELEMETRY
+static int
+handle_port_list(const char *cmd __rte_unused,
+ const char *params __rte_unused,
+ struct rte_tel_data *d)
+{
+ int port_id;
+
+ rte_tel_data_start_array(d, RTE_TEL_INT_VAL);
+ RTE_ETH_FOREACH_DEV(port_id)
+ rte_tel_data_add_array_int(d, port_id);
+ return 0;
+}
+
+static int
+handle_port_xstats(const char *cmd __rte_unused,
+ const char *params,
+ struct rte_tel_data *d)
+{
+ struct rte_eth_xstat *eth_xstats;
+ struct rte_eth_xstat_name *xstat_names;
+ int port_id, num_xstats;
+ int i, ret;
+
+ if (params == NULL || strlen(params) == 0 || !isdigit(*params))
+ return -1;
+
+ port_id = atoi(params);
+ if (!rte_eth_dev_is_valid_port(port_id))
+ return -1;
+
+ num_xstats = rte_eth_xstats_get(port_id, NULL, 0);
+ if (num_xstats < 0)
+ return -1;
+
+ /* use one malloc for both names and stats */
+ eth_xstats = malloc((sizeof(struct rte_eth_xstat) +
+ sizeof(struct rte_eth_xstat_name)) * num_xstats);
+ if (eth_xstats == NULL)
+ return -1;
+ xstat_names = (void *)ð_xstats[num_xstats];
+
+ ret = rte_eth_xstats_get_names(port_id, xstat_names, num_xstats);
+ if (ret < 0 || ret > num_xstats) {
+ free(eth_xstats);
+ return -1;
+ }
+
+ ret = rte_eth_xstats_get(port_id, eth_xstats, num_xstats);
+ if (ret < 0 || ret > num_xstats) {
+ free(eth_xstats);
+ return -1;
+ }
+
+ rte_tel_data_start_dict(d);
+ for (i = 0; i < num_xstats; i++)
+ rte_tel_data_add_dict_u64(d, xstat_names[i].name,
+ eth_xstats[i].value);
+ return 0;
+}
+
+static int
+handle_port_link_status(const char *cmd __rte_unused,
+ const char *params,
+ struct rte_tel_data *d)
+{
+ static const char *status_str = "status";
+ int ret, port_id;
+ struct rte_eth_link link;
+
+ if (params == NULL || strlen(params) == 0 || !isdigit(*params))
+ return -1;
+
+ port_id = atoi(params);
+ if (!rte_eth_dev_is_valid_port(port_id))
+ return -1;
+
+ ret = rte_eth_link_get(port_id, &link);
+ if (ret < 0)
+ return -1;
+
+ rte_tel_data_start_dict(d);
+ if (!link.link_status) {
+ rte_tel_data_add_dict_string(d, status_str, "DOWN");
+ return 0;
+ }
+ rte_tel_data_add_dict_string(d, status_str, "UP");
+ rte_tel_data_add_dict_u64(d, "speed", link.link_speed);
+ rte_tel_data_add_dict_string(d, "duplex",
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ "full-duplex" : "half-duplex");
+ return 0;
+}
+#endif
+
RTE_INIT(ethdev_init_log)
{
rte_eth_dev_logtype = rte_log_register("lib.ethdev");
if (rte_eth_dev_logtype >= 0)
rte_log_set_level(rte_eth_dev_logtype, RTE_LOG_INFO);
+#ifdef RTE_LIBRTE_TELEMETRY
+ rte_telemetry_register_cmd("/ethdev/list", handle_port_list,
+ "Returns list of available ethdev ports. Takes no parameters");
+ rte_telemetry_register_cmd("/ethdev/xstats", handle_port_xstats,
+ "Returns the extended stats for a port. Parameters: int port_id");
+ rte_telemetry_register_cmd("/ethdev/link_status",
+ handle_port_link_status,
+ "Returns the link status for a port. Parameters: int port_id");
+#endif
}
--
2.17.1
More information about the dev
mailing list