[dpdk-dev] [PATCH v2 1/3] net/i40e: fix FDIR issue for ARP packets

Zhao1, Wei wei.zhao1 at intel.com
Tue Apr 28 09:46:10 CEST 2020



> -----Original Message-----
> From: Xing, Beilei <beilei.xing at intel.com>
> Sent: Tuesday, April 28, 2020 3:38 PM
> To: Zhao1, Wei <wei.zhao1 at intel.com>; dev at dpdk.org
> Cc: stable at dpdk.org; maxime.leroy at 6wind.com
> Subject: RE: [PATCH v2 1/3] net/i40e: fix FDIR issue for ARP packets
> 
> 
> 
> > -----Original Message-----
> > From: Zhao1, Wei <wei.zhao1 at intel.com>
> > Sent: Tuesday, April 28, 2020 1:48 PM
> > To: dev at dpdk.org
> > Cc: stable at dpdk.org; Xing, Beilei <beilei.xing at intel.com>;
> > maxime.leroy at 6wind.com; Zhao1, Wei <wei.zhao1 at intel.com>
> > Subject: [PATCH v2 1/3] net/i40e: fix FDIR issue for ARP packets
> >
> > This patch can enable FDIR awith ethertype as input set for ARP
> > packet, it will associate this rule, "flow create 0 ingress pattern
> > eth type is 0x0806 / end actions mark id 0x86 / rss / end", with
> > pctype I40E_FILTER_PCTYPE_L2_PAYLOAD for ARP packet rule.
> > I have tried to enable ARP ethertype for FDIR filter, it work well for
> > ARP for FDIR filter, so delete the check.
> 
> How about
> 'Currently, flow "pattern eth type is 0x0806 / end actions mark id 0x86 / rss /
> end" can't be created successfully. FDIR parser shouldn't deny
> RTE_ETHER_TYPE_ARP since ARP packets will be parsed as
> PCTYPE_L2_PAYLOAD.
> This patch fixes the issue.' ?

Ok 

> 
> >
> > Bugzilla ID: 402
> > Fixes: 42044b69c67d ("net/i40e: support input set selection for FDIR")
> > Cc: stable at dpdk.org
> >
> > Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> > ---
> >  drivers/net/i40e/i40e_flow.c | 2 --
> >  1 file changed, 2 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_flow.c
> > b/drivers/net/i40e/i40e_flow.c index 7e64ae53a..1533d5abb 100644
> > --- a/drivers/net/i40e/i40e_flow.c
> > +++ b/drivers/net/i40e/i40e_flow.c
> > @@ -2666,7 +2666,6 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev
> > *dev,
> >  				if (next_type ==
> > RTE_FLOW_ITEM_TYPE_VLAN ||
> >  				    ether_type == RTE_ETHER_TYPE_IPV4 ||
> >  				    ether_type == RTE_ETHER_TYPE_IPV6 ||
> > -				    ether_type == RTE_ETHER_TYPE_ARP ||
> >  				    ether_type == outer_tpid) {
> >  					rte_flow_error_set(error, EINVAL,
> >
> > RTE_FLOW_ERROR_TYPE_ITEM,
> > @@ -2711,7 +2710,6 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev
> > *dev,
> >
> >  				if (ether_type == RTE_ETHER_TYPE_IPV4 ||
> >  				    ether_type == RTE_ETHER_TYPE_IPV6 ||
> > -				    ether_type == RTE_ETHER_TYPE_ARP ||
> >  				    ether_type == outer_tpid) {
> >  					rte_flow_error_set(error, EINVAL,
> >
> > RTE_FLOW_ERROR_TYPE_ITEM,
> > --
> > 2.19.1



More information about the dev mailing list