[dpdk-dev] [PATCH v12 06/11] ethdev: add simple power management API
Andrew Rybchenko
andrew.rybchenko at oktetlabs.ru
Mon Dec 28 12:00:55 CET 2020
On 12/17/20 5:05 PM, Anatoly Burakov wrote:
> From: Liang Ma <liang.j.ma at intel.com>
>
> Add a simple API to allow getting the monitor conditions for
> power-optimized monitoring of the RX queues from the PMD, as well as
> release notes information.
>
> Signed-off-by: Liang Ma <liang.j.ma at intel.com>
> Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
> ---
>
> Notes:
> v6:
> - Rebase on top of latest main
> - Ensure the API checks queue ID (Konstantin)
> - Removed accidental inclusion of unrelated release notes
> v5:
> - Bring function format in line with other functions in the file
> - Ensure the API is supported by the driver before calling it (Konstantin)
>
> doc/guides/rel_notes/release_21_02.rst | 4 ++++
> lib/librte_ethdev/rte_ethdev.c | 28 ++++++++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev.h | 25 +++++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev_driver.h | 22 ++++++++++++++++++++
> lib/librte_ethdev/version.map | 3 +++
> 5 files changed, 82 insertions(+)
>
> diff --git a/doc/guides/rel_notes/release_21_02.rst b/doc/guides/rel_notes/release_21_02.rst
> index 638f98168b..feb3ff4f06 100644
> --- a/doc/guides/rel_notes/release_21_02.rst
> +++ b/doc/guides/rel_notes/release_21_02.rst
> @@ -55,6 +55,10 @@ New Features
> Also, make sure to start the actual text at the margin.
> =======================================================
>
> +* **ethdev: added 1 new API for PMD power management**
"1 new API" sounds a bit confusing. May be just "a new API"?
> +
> + * ``rte_eth_get_monitor_addr()``, to be used in conjunction with
> + ``rte_power_monitor()`` to enable automatic power management for PMD's.
Missing extra empty line here.
>
> Removed Items
> -------------
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 17ddacc78d..58f68321ea 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -5115,6 +5115,34 @@ rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> dev->dev_ops->tx_burst_mode_get(dev, queue_id, mode));
> }
>
> +int
> +rte_eth_get_monitor_addr(uint16_t port_id, uint16_t queue_id,
> + struct rte_power_monitor_cond *pmc)
> +{
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> +
> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_monitor_addr, -ENOTSUP);
> +
> + if (queue_id >= dev->data->nb_tx_queues) {
> + RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
Why is Tx queue checked and logged here, but Rx queue is used
below? I guess Rx should be used here as well.
I.e. TX -> Rx
> + return -EINVAL;
> + }
> +
> + if (pmc == NULL) {
> + RTE_ETHDEV_LOG(ERR, "Invalid power monitor condition=%p\n",
> + pmc);
> + return -EINVAL;
> + }
> +
> + return eth_err(port_id,
> + dev->dev_ops->get_monitor_addr(dev->data->rx_queues[queue_id],
> + pmc));
> +}
> +
> int
> rte_eth_dev_set_mc_addr_list(uint16_t port_id,
> struct rte_ether_addr *mc_addr_set,
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index f5f8919186..ca0f91312e 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -157,6 +157,7 @@ extern "C" {
> #include <rte_common.h>
> #include <rte_config.h>
> #include <rte_ether.h>
> +#include <rte_power_intrinsics.h>
>
> #include "rte_ethdev_trace_fp.h"
> #include "rte_dev_info.h"
> @@ -4334,6 +4335,30 @@ __rte_experimental
> int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> struct rte_eth_burst_mode *mode);
>
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Retrieve the monitor condition for a given receive queue.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The Rx queue on the Ethernet device for which information
> + * will be retrieved.
> + * @param pmc
> + * The pointer point to power-optimized monitoring condition structure.
> + *
> + * @return
> + * - 0: Success.
> + * -ENOTSUP: Operation not supported.
> + * -EINVAL: Invalid parameters.
> + * -ENODEV: Invalid port ID.
> + */
> +__rte_experimental
> +int rte_eth_get_monitor_addr(uint16_t port_id, uint16_t queue_id,
> + struct rte_power_monitor_cond *pmc);
> +
> /**
> * Retrieve device registers and register attributes (number of registers and
> * register size)
> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
> index 0eacfd8425..ae4f152cf0 100644
> --- a/lib/librte_ethdev/rte_ethdev_driver.h
> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
> @@ -763,6 +763,26 @@ typedef int (*eth_hairpin_queue_peer_unbind_t)
> (struct rte_eth_dev *dev, uint16_t cur_queue, uint32_t direction);
> /**< @internal Unbind peer queue from the current queue. */
>
> +/**
> + * @internal
> + * Get address of memory location whose contents will change whenever there is
> + * new data to be received on an RX queue.
RX -> Rx
> + *
> + * @param rxq
> + * Ethdev queue pointer.
> + * @param pmc
> + * The pointer to power-optimized monitoring condition structure.
> + * @return
> + * Negative errno value on error, 0 on success.
> + *
> + * @retval 0
> + * Success
> + * @retval -EINVAL
> + * Invalid parameters
> + */
> +typedef int (*eth_get_monitor_addr_t)(void *rxq,
> + struct rte_power_monitor_cond *pmc);
> +
> /**
> * @internal A structure containing the functions exported by an Ethernet driver.
> */
> @@ -917,6 +937,8 @@ struct eth_dev_ops {
> /**< Set up the connection between the pair of hairpin queues. */
> eth_hairpin_queue_peer_unbind_t hairpin_queue_peer_unbind;
> /**< Disconnect the hairpin queues of a pair from each other. */
> + eth_get_monitor_addr_t get_monitor_addr;
> + /**< Get next RX queue ring entry address. */
RX -> Rx
> };
>
> /**
> diff --git a/lib/librte_ethdev/version.map b/lib/librte_ethdev/version.map
> index d3f5410806..a124e1e370 100644
> --- a/lib/librte_ethdev/version.map
> +++ b/lib/librte_ethdev/version.map
> @@ -240,6 +240,9 @@ EXPERIMENTAL {
> rte_flow_get_restore_info;
> rte_flow_tunnel_action_decap_release;
> rte_flow_tunnel_item_release;
> +
> + # added in 21.02
> + rte_eth_get_monitor_addr;
> };
>
> INTERNAL {
>
More information about the dev
mailing list