[dpdk-dev] [PATCH 1/2] config: deduplicate options

[Thomas Monjalon]

Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.

Signed-off-by: Thomas Monjalon <thomas at monjalon.net>
---
 config/common_armv8a_linux                    | 2 --
 config/common_linux                           | 6 ------
 config/defconfig_arm-armv7a-linuxapp-gcc      | 9 ---------
 config/defconfig_arm64-octeontx2-linuxapp-gcc | 4 ----
 config/defconfig_arm64-stingray-linuxapp-gcc  | 2 --
 config/defconfig_arm64-thunderx-linuxapp-gcc  | 1 -
 6 files changed, 24 deletions(-)

diff --git a/config/common_armv8a_linux b/config/common_armv8a_linux
index 433e66c7d8..020f8f006c 100644
--- a/config/common_armv8a_linux
+++ b/config/common_armv8a_linux
@@ -41,5 +41,3 @@ CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n
 # NXP PFE PMD Driver
 #
 CONFIG_RTE_LIBRTE_PFE_PMD=y
-
-CONFIG_RTE_SCHED_VECTOR=n
diff --git a/config/common_linux b/config/common_linux
index 583efadc7d..816810671a 100644
--- a/config/common_linux
+++ b/config/common_linux
@@ -66,9 +66,3 @@ CONFIG_RTE_LIBRTE_HINIC_PMD=y
 # Hisilicon HNS3 PMD driver
 #
 CONFIG_RTE_LIBRTE_HNS3_PMD=y
-
-#
-# Compile PMD for Intel FPGA raw device
-# To compile, CONFIG_RTE_EAL_VFIO should be enabled.
-#
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index 6ac7f47e47..9ecc2a526c 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -30,14 +30,7 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
 # KNI is not supported on 32-bit
 CONFIG_RTE_LIBRTE_KNI=n
 
-# PCI is usually not used on ARM
-CONFIG_RTE_EAL_IGB_UIO=n
-
-# fails to compile on ARM
-CONFIG_RTE_SCHED_VECTOR=n
-
 # cannot use those on ARM
-CONFIG_RTE_KNI_KMOD=n
 CONFIG_RTE_LIBRTE_ARK_PMD=n
 CONFIG_RTE_LIBRTE_EM_PMD=n
 CONFIG_RTE_LIBRTE_IGB_PMD=n
@@ -47,9 +40,7 @@ CONFIG_RTE_LIBRTE_ENIC_PMD=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_IXGBE_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
 CONFIG_RTE_LIBRTE_QEDE_PMD=n
 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
 CONFIG_RTE_LIBRTE_AVP_PMD=n
diff --git a/config/defconfig_arm64-octeontx2-linuxapp-gcc b/config/defconfig_arm64-octeontx2-linuxapp-gcc
index 7687dbec8d..7cfb81872c 100644
--- a/config/defconfig_arm64-octeontx2-linuxapp-gcc
+++ b/config/defconfig_arm64-octeontx2-linuxapp-gcc
@@ -6,7 +6,6 @@
 
 CONFIG_RTE_MACHINE="octeontx2"
 
-CONFIG_RTE_CACHE_LINE_SIZE=128
 CONFIG_RTE_MAX_NUMA_NODES=1
 CONFIG_RTE_MAX_LCORE=24
 CONFIG_RTE_ARM_FEATURE_ATOMICS=y
@@ -15,8 +14,5 @@ CONFIG_RTE_ARM_FEATURE_ATOMICS=y
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 
-# Recommend to use VFIO as co-processors needs SMMU/IOMMU
-CONFIG_RTE_EAL_IGB_UIO=n
-
 # Max supported NIX LFs
 CONFIG_RTE_MAX_VFIO_GROUPS=128
diff --git a/config/defconfig_arm64-stingray-linuxapp-gcc b/config/defconfig_arm64-stingray-linuxapp-gcc
index 7b33aa7afb..2a6f6cee28 100644
--- a/config/defconfig_arm64-stingray-linuxapp-gcc
+++ b/config/defconfig_arm64-stingray-linuxapp-gcc
@@ -5,7 +5,6 @@
 #include "defconfig_arm64-armv8a-linux-gcc"
 
 # Broadcom - Stingray
-CONFIG_RTE_MACHINE="armv8a"
 CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
 
 # Doesn't support NUMA
@@ -13,4 +12,3 @@ CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 
 CONFIG_RTE_EAL_IGB_UIO=y
-CONFIG_RTE_KNI_KMOD=n
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index a52f066510..946906b67a 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -6,7 +6,6 @@
 
 CONFIG_RTE_MACHINE="thunderx"
 
-CONFIG_RTE_CACHE_LINE_SIZE=128
 CONFIG_RTE_USE_C11_MEM_MODEL=n
 CONFIG_RTE_MAX_NUMA_NODES=2
 CONFIG_RTE_MAX_LCORE=96
-- 
2.25.0