[dpdk-dev] [PATCH v2 0/7] support switch management
Xiaojun Liu
xiaojun.liu at silicom.co.il
Wed Feb 19 06:58:02 CET 2020
Hi Xiao,
I have already finished the fixing.
Thank you for your helping so much. I still have some questions.
1. Shall I generate the patch based on old patches ?
2. I used checkpatches.sh+check-git-log.sh+test-build.sh to check the patch, is that enough ?
3. May I send the patch to you first ? So you can help checking it before I submit.
Best regards,
Xiaojun
________________________________
From: dev <dev-bounces at dpdk.org> on behalf of Xiaojun Liu <xiaojun.liu at silicom.co.il>
Sent: Friday, February 14, 2020 10:46 AM
To: Wang, Xiao W <xiao.w.wang at intel.com>
Cc: dev at dpdk.org <dev at dpdk.org>; Zhang, Qi Z <qi.z.zhang at intel.com>; Kwan, Ngai-mint <ngai-mint.kwan at intel.com>; Fornal, Jakub <jakub.fornal at intel.com>; Keller, Jacob E <jacob.e.keller at intel.com>; Jeff Zheng <jeff.zheng at silicom.co.il>; Eyal Cohen <eyalc at silicom.co.il>
Subject: Re: [dpdk-dev] [PATCH v2 0/7] support switch management
hi Xiao,
Thanks for your comments! I will fix them ASAP.
Best regards,
Xiaojun
________________________________
From: Wang, Xiao W <xiao.w.wang at intel.com>
Sent: Tuesday, February 11, 2020 6:31 PM
To: Xiaojun Liu <xiaojun.liu at silicom.co.il>
Cc: dev at dpdk.org <dev at dpdk.org>; Zhang, Qi Z <qi.z.zhang at intel.com>; Kwan, Ngai-mint <ngai-mint.kwan at intel.com>; Fornal, Jakub <jakub.fornal at intel.com>; Keller, Jacob E <jacob.e.keller at intel.com>; Jeff Zheng <jeff.zheng at silicom.co.il>; Eyal Cohen <eyalc at silicom.co.il>
Subject: RE: [PATCH v2 0/7] support switch management
Since this is a big code change, so just some general comments/suggestions for your next version patch set:
- please clean up comments like "XXX" in the code.
- It's better to define MACRO for all register addrs and bit shift, please try to avoid magic number (e.g. in the serdes part).
- There're threads created for handling events and timers, we'd better use pthread_join() to recycle them in fm10k_sm_detach().
- set "tapstop" and "shiftwidth" to 8 in vimrc, then recheck the macros and keep them aligned.
- There're some "printf" for debugging, please use dpdk logging API instead.
Best Regards,
Xiao
> -----Original Message-----
> From: Xiaojun Liu <xiaojun.liu at silicom.co.il>
> Sent: Tuesday, January 21, 2020 2:15 PM
> To: Wang, Xiao W <xiao.w.wang at intel.com>
> Cc: dev at dpdk.org; Zhang, Qi Z <qi.z.zhang at intel.com>; Kwan, Ngai-mint
> <ngai-mint.kwan at intel.com>; jakub.fornal at intel.co; Keller, Jacob E
> <jacob.e.keller at intel.com>; Jeff Zheng <jeff.zheng at silicom.co.il>; Eyal
> Cohen <eyalc at silicom.co.il>
> Subject: RE: [PATCH v2 0/7] support switch management
>
> Hi Xiao,
>
> Thank you! I will update the commit log and prepare a document to describe
> the design and implementation.
>
> Best regards,
> Xiaojun
>
> -----Original Message-----
> From: Wang, Xiao W [mailto:xiao.w.wang at intel.com]
> Sent: Tuesday, January 21, 2020 10:53 AM
> To: Xiaojun Liu
> Cc: dev at dpdk.org; Zhang, Qi Z; Kwan, Ngai-mint; jakub.fornal at intel.co;
> Keller, Jacob E
> Subject: RE: [PATCH v2 0/7] support switch management
>
> Hi Xiaojun,
>
> Could you please help to improve the commit logs of all the 7 patches? They
> look very similar, and info like below is not very helpful for reviewer, since
> we already know which file you are adding.
> "To support switch management, add the following files:
> Add fm10k/switch/fm10k_debug.h(define log Macros).
> Add fm10k/switch/fm10k_regs.h(define all the registers)."
>
> Please talk more about the design and implementation details in the commit
> log. Refer to history patches if you need a sample.
>
> Also please help to address the compile error reported by automation in link
> http://patches.dpdk.org/patch/63742/:
> "ci/Intel-compilation fail Compilation issues"
>
> I would look deeper into your change, and you can address above comments
> simultaneously.
>
> Best Regards,
> Xiao
>
> > -----Original Message-----
> > From: Xiaojun Liu <xiaojun.liu at silicom.co.il>
> > Sent: Wednesday, December 11, 2019 5:52 PM
> > To: Wang, Xiao W <xiao.w.wang at intel.com>; Zhang, Qi Z
> > <qi.z.zhang at intel.com>; Kwan, Ngai-mint <ngai-mint.kwan at intel.com>;
> > jakub.fornal at intel.co; Keller, Jacob E <jacob.e.keller at intel.com>
> > Cc: dev at dpdk.org; Xiaojun Liu <xiaojun.liu at silicom.co.il>
> > Subject: [PATCH v2 0/7] support switch management
> >
> > To avoid configuration for both kernel driver
> > and userspace SDK outside DPDK, we add switch
> > management in FM10K DPDK PMD driver.
> > To enable switch management, you need add
> > CONFIG_RTE_FM10K_MANAGEMENT=y in
> > config/common_linux when building.
> >
> >
> > Xiaojun Liu (7):
> > net/fm10k: add i2c sbus registers definition
> > net/fm10k: add some modules of port
> > net/fm10k: add config ffu statistics support
> > net/fm10k: add flow and switch management
> > net/fm10k: add switch initialization
> > net/fm10k: add mirror and filter ctrl
> > net/fm10k: add dpdk port mapping
> >
> > drivers/net/fm10k/Makefile | 22 +
> > drivers/net/fm10k/fm10k_ethdev.c | 580 +++++-
> > drivers/net/fm10k/switch/fm10k_config.c | 855 ++++++++
> > drivers/net/fm10k/switch/fm10k_config.h | 171 ++
> > drivers/net/fm10k/switch/fm10k_debug.h | 19 +
> > drivers/net/fm10k/switch/fm10k_ext_port.c | 841 ++++++++
> > drivers/net/fm10k/switch/fm10k_ext_port.h | 136 ++
> > drivers/net/fm10k/switch/fm10k_ffu.c | 1209 +++++++++++
> > drivers/net/fm10k/switch/fm10k_ffu.h | 31 +
> > drivers/net/fm10k/switch/fm10k_flow.c | 872 ++++++++
> > drivers/net/fm10k/switch/fm10k_flow.h | 26 +
> > drivers/net/fm10k/switch/fm10k_i2c.c | 310 +++
> > drivers/net/fm10k/switch/fm10k_i2c.h | 54 +
> > drivers/net/fm10k/switch/fm10k_regs.h | 2202
> ++++++++++++++++++++
> > drivers/net/fm10k/switch/fm10k_sbus.c | 292 +++
> > drivers/net/fm10k/switch/fm10k_sbus.h | 40 +
> > drivers/net/fm10k/switch/fm10k_serdes.c | 1886 +++++++++++++++++
> > drivers/net/fm10k/switch/fm10k_serdes.h | 32 +
> > drivers/net/fm10k/switch/fm10k_sm.c | 182 ++
> > drivers/net/fm10k/switch/fm10k_sm.h | 78 +
> > drivers/net/fm10k/switch/fm10k_spico_code.c | 2966
> > +++++++++++++++++++++++++++
> > drivers/net/fm10k/switch/fm10k_spico_code.h | 21 +
> > drivers/net/fm10k/switch/fm10k_stats.c | 1242 +++++++++++
> > drivers/net/fm10k/switch/fm10k_stats.h | 257 +++
> > drivers/net/fm10k/switch/fm10k_switch.c | 2562
> > +++++++++++++++++++++++
> > drivers/net/fm10k/switch/fm10k_switch.h | 336 +++
> > 26 files changed, 17188 insertions(+), 34 deletions(-)
> > create mode 100644 drivers/net/fm10k/switch/fm10k_config.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_config.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_debug.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_ext_port.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_ext_port.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_ffu.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_ffu.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_flow.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_flow.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_i2c.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_i2c.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_regs.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_sbus.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_sbus.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_serdes.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_serdes.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_sm.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_sm.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_spico_code.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_spico_code.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_stats.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_stats.h
> > create mode 100644 drivers/net/fm10k/switch/fm10k_switch.c
> > create mode 100644 drivers/net/fm10k/switch/fm10k_switch.h
> >
> > --
> > 1.8.3.1
More information about the dev
mailing list