[dpdk-dev] [PATCH v2] net/mlx5: fix the hairpin queue capacity

Ori Kam orika at mellanox.com
Wed Feb 19 13:32:07 CET 2020



> -----Original Message-----
> From: Bing Zhao <bingz at mellanox.com>
> Sent: Wednesday, February 19, 2020 10:29 AM
> To: Ori Kam <orika at mellanox.com>; Slava Ovsiienko
> <viacheslavo at mellanox.com>
> Cc: Raslan Darawsheh <rasland at mellanox.com>; Matan Azrad
> <matan at mellanox.com>; dev at dpdk.org; stable at dpdk.org
> Subject: [PATCH v2] net/mlx5: fix the hairpin queue capacity
> 
> The hairpin TX/RX queue depth and packet size is fixed in the past.
> When the firmware has some fix or improvement, the PMD will not
> make full use of it. And also, 32 packets for a single queue will not
> guarantee a good performance for hairpin flows. It will make the
> stride size larger and for small packets, it is a waste of memory.
> The recommended stride size is 64B now.
> 
> The parameter of hairpin queue setup needs to be adjusted.
> 1. A proper buffer size should support the standard jumbo frame with
> 9KB, and also more than 1 jumbo frame packet for performance.
> 2. Number of packets of a single queue should be the maximum
> supported value (total buffer size / stride size).
> 
> There is no need to support the max capacity of total buffer size
> because the memory consumption should also be taken into
> consideration.
> 
> Fixes: e79c9be91515 ("net/mlx5: support Rx hairpin queues")
> Cc: orika at mellanox.com
> Cc: stable at dpdk.org
> 
> Signed-off-by: Bing Zhao <bingz at mellanox.com>
> 
> ------------
> 

Acked-by: Ori Kam <orika at mellanox.com>
Thanks,
Ori


> v2: change the capacity parameters and the commit details
> 
> ---
>  drivers/net/mlx5/mlx5_defs.h |  4 ++++
>  drivers/net/mlx5/mlx5_rxq.c  | 13 +++++++++----
>  drivers/net/mlx5/mlx5_txq.c  | 13 +++++++++----
>  3 files changed, 22 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
> index 9b392ed..83ca367 100644
> --- a/drivers/net/mlx5/mlx5_defs.h
> +++ b/drivers/net/mlx5/mlx5_defs.h
> @@ -173,6 +173,10 @@
>  #define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
>  #define MLX5_DEFAULT_COPY_ID UINT32_MAX
> 
> +/* Hairpin TX/RX queue configuration parameters. */
> +#define MLX5_HAIRPIN_QUEUE_STRIDE 6
> +#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (15 + 2)
> +
>  /* Definition of static_assert found in /usr/include/assert.h */
>  #ifndef HAVE_STATIC_ASSERT
>  #define static_assert _Static_assert
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index dc0fd82..8a6b410 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -1268,6 +1268,7 @@
>  	struct mlx5_devx_create_rq_attr attr = { 0 };
>  	struct mlx5_rxq_obj *tmpl = NULL;
>  	int ret = 0;
> +	uint32_t max_wq_data;
> 
>  	MLX5_ASSERT(rxq_data);
>  	MLX5_ASSERT(!rxq_ctrl->obj);
> @@ -1283,11 +1284,15 @@
>  	tmpl->type = MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN;
>  	tmpl->rxq_ctrl = rxq_ctrl;
>  	attr.hairpin = 1;
> -	/* Workaround for hairpin startup */
> -	attr.wq_attr.log_hairpin_num_packets = log2above(32);
> -	/* Workaround for packets larger than 1KB */
> +	max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz;
> +	/* Jumbo frames > 9KB should be supported, and more packets. */
>  	attr.wq_attr.log_hairpin_data_sz =
> -			priv->config.hca_attr.log_max_hairpin_wq_data_sz;
> +			(max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ?
> +			max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE;
> +	/* Set the packets number to the maximum value for performance. */
> +	attr.wq_attr.log_hairpin_num_packets =
> +			attr.wq_attr.log_hairpin_data_sz -
> +			MLX5_HAIRPIN_QUEUE_STRIDE;
>  	tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->ctx, &attr,
>  					   rxq_ctrl->socket);
>  	if (!tmpl->rq) {
> diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
> index bc13abf..2ad849a 100644
> --- a/drivers/net/mlx5/mlx5_txq.c
> +++ b/drivers/net/mlx5/mlx5_txq.c
> @@ -493,6 +493,7 @@
>  	struct mlx5_devx_create_sq_attr attr = { 0 };
>  	struct mlx5_txq_obj *tmpl = NULL;
>  	int ret = 0;
> +	uint32_t max_wq_data;
> 
>  	MLX5_ASSERT(txq_data);
>  	MLX5_ASSERT(!txq_ctrl->obj);
> @@ -509,11 +510,15 @@
>  	tmpl->txq_ctrl = txq_ctrl;
>  	attr.hairpin = 1;
>  	attr.tis_lst_sz = 1;
> -	/* Workaround for hairpin startup */
> -	attr.wq_attr.log_hairpin_num_packets = log2above(32);
> -	/* Workaround for packets larger than 1KB */
> +	max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz;
> +	/* Jumbo frames > 9KB should be supported, and more packets. */
>  	attr.wq_attr.log_hairpin_data_sz =
> -			priv->config.hca_attr.log_max_hairpin_wq_data_sz;
> +			(max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ?
> +			max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE;
> +	/* Set the packets number to the maximum value for performance. */
> +	attr.wq_attr.log_hairpin_num_packets =
> +			attr.wq_attr.log_hairpin_data_sz -
> +			MLX5_HAIRPIN_QUEUE_STRIDE;
>  	attr.tis_num = priv->sh->tis->id;
>  	tmpl->sq = mlx5_devx_cmd_create_sq(priv->sh->ctx, &attr);
>  	if (!tmpl->sq) {
> --
> 1.8.3.1



More information about the dev mailing list